Cannot Read from or Write to Disk

Can someone tell me why i get this message? I want to delete some things, so I clicked the option to manually manage songs, however, when I do then delete and go to update the ipod, i get this message. any solutions??
thanks ~ eileen

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

Similar Messages

Itunes cannot read from or write to disk

So I just got this new notebook, and I moved all my itunes files over and tried to sync my ipod touch. It didn't work out so well... I got an error message saying that the disk could not be found, it begins to sync and then I got an additional message saying that the ipod could not be read from or written to.

Pack the old ipod up and send it back, soon or they will charge you $119 on your Credit Card. Sounds like there may be a possibility that your ipod shuffle may not be communicating with your USB ports properly. Try running the ipod updater software and try restoring the ipod. If that does not work, test your shuffle on another computer to see if it may not be an issue with the USB port. I know the 20GB works fine...But it still just may not communicate properly for some reason. As for updating the shuffle, I create a playlist in my itunes and when I plug in my shuffle, it gives me an option to autofill. I just select the playlist I want loaded to my ipod and hit autofill...Which works just fine for me.

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

"Can't read from or write to disk...." iPod error

I recently switched from my old PowerBook G4 (running Leopard 10.5.2) to a newer MacBook Pro (running Leopard 10.5.5). I migrated my account and permissions from the PB to the MacBook Pro, and everything is working just fine except for iTunes (version 8.0.2) and my older 160 GB iPod Classic (running 1.1.2).
NOTE: THE VERSION OF iTunes ON THE PB WAS VERSION 8.0.1.
Since the migration, I've been getting this "can't read from or write to disk..." error whenever I attempt to sync my iPod to iTunes. Previously, I'd never had any problems. I have tried to restore the iPod using iTunes - didn't work. I have tried different USB to dock connector cables - didn't work. I have even tried completely re-formatting the iPod using Disk Utility - didn't work. Everytime I begin syncing the iPod, it starts out just fine. At varying degrees of completion it ALWAYS fails with the same error.
I had an idea. I tried syncing the iPod to a different computer - my G5 4 x 2.5 GHz (running Leopard 10.5.5) with iTunes (version 8.0.2). I still got the same error. I haven't dropped it, submerged it in water or done anything to it that would otherwise compromise its functionality. So, I'm at a loss.
PLEASE! PLEASE! PLEASE!
Does anyone have any other suggestions? - OTHER THAN BUYING A NEW IPOD

UPDATE:
OK, after the visit to my Genius Bar; I thought of a variable that wasn't previously considered. Because their transfer of media was successful without the slightest hitch, I had to figure out something else.
Everytime I had tried to sync the iPod with my various Macs, I was using the same process. Since all of my music and movies "live" on an external 500 GB drive, I was attempting to use that same drive whenever I would try to sync. It occurred to me that possibly the failing was in the drive and not the iPod.
I have part of that library on a Power Mac G4 867 DP (running 10.4.9). I updated the iTunes on that machine to 8.0.2, connected the iPod and made a successful transfer of a large amount of media!
My only problem now is that I can't figure out how to get the 500 GB drive to stop hanging on transfer and update of my Genius information. The drive just completely stalls and I get the spinning wheel from iTunes and the application ceases to respond. When I force quit iTunes, the drive recovers fine. I don't have any problems transferring data to and from it and Disk Utility reports that the drive is healthy.
I have tried re-installing iTunes on all affected Macs - didn't help. I believe my problem may exist in the iTunes Library file or in the associated .xml document. My only concern is that if I do a completely fresh install of iTunes where those files would be re-created, I would lose all of my play and ratings data as well as the information about when my files were added. On a related note, when playing the music from this drive through iTunes. I don't have any issues at all.
ANY SUGGESTIONS?

Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~Drew

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

Cant read from or write to disk...

I am having a problem with my Click-wheel iPod which has worked flawlessly for the 2+ years I have had it. For me, this problem just started happening with the release of iTunes 7.02 which seems to correlate. When syncing with iTunes, it will copy anywhere from 15-150 songs at one time before giving the message [Exclamation point] "Attempting to copy to the disk {ipod name} failed. The disk could not be read from or written to." Nothing other than the iTunes version has changed with my desktop (same USB port, same hardware, same cable, etc.)
Since I found no issues on the apple forum about this I searched elsewhere and found the following link:
http://elyliu.com/blog3/2006/05/01/the-ipod-cannot-be-updated/
Clearly there are a LOT of frustrated iPod owners out there having the same issue. What is Apple doing about this? How is this going to be resolved? I am hopeful that the company is not going to simply pretend it doesn't exist as was asserted by some of the posters in this forum. Please help...
For clarification I am using iTunes 7.02 running on OSX 10.4.8 and the iPod has been restored using the most up-to-date firmware.
1.8 Ghz G5 Single Proc Mac OS X (10.4.8)

Jeff,
Thanks but I have already either tried the items in this article or determined they are not issues. I have a video iPod and an iPod shuffle that both successfully sync with iTunes. Given that, I am guessing that I have no issues with iTunes, PC Disk corruption, PC hardware and/or cabeling, or bad music files.
Also, since the click-wheel seems to copy songs with no issue up to a point, I also don't believe there are physical connector issues with it. It appears to be some type of buffer issue that gets overloaded or some type of data field that causes the problem. If it happens on a given song, I can go right back and sync again and it will copy the song it bombed out on last time and another 15-150 songs before doing it again. It is likely an application or driver issue as it is happening to both PC and Mac users.
I also think Apple needs to take a serious look at the article you sent and ask themselves, "Who really wants to go through all of this to listen to their music?". For a company that is "all about the user experience" they seem to be conveniently turning a blind eye to the pain they inflict on iPod owners. If the product truly is this unstable then maybe a re-engineering is in line...

Converting WAV files to AAC Error convert Can't read from or write to disk

For several weeks I had no problem converting WAV files (from an Olympus Digital Recorder) to AAC format in iTunes, then one day I clicked "Convert Selection to AAC" and received the message "Error occured while converting the file. The disk could not be read from or written to." There is no Error # associated with the Error message.

I recently spent over 14 hours converting all my CD songs to WAV. WAV conversion was the only one of two options available with my older Nero software, and MP3 conversion was not an option. I intended to make mixed CD's. By the time I was done, I had over 300 songs that take up over 17 GB in this WAV format.
The thought of sitting even more endless hours making these CD's made me even more exhausted, and I realized that I should get with the times and get an MP3 player. So, I bought an iPod directly from Apple two days ago (12/16), and get this, MaclessInAZ, the sales person told me that I all my WAV files could be imported into my iPod with iTunes. (!!!)
I am very glad to have read this thread before I got my iPod. I would have been so upset if there was no easy solution. My new iPod is supposed to be delivered tomorrow, and I am looking forward to getting it. Many thanks to weavercs for the information on the Switch program that converts WAV to MP3. Even if I decide to buy the full version of Switch, it is a lot less expensive than other conversion programs that I just found online, like Roxio.

Unable to Read from or Write to Disk

What exactly does that mean? And why is it all of the sudden I cannot add podcasts or tv shows to my Ipod? It just started.
I am technologically challenged, please give easy directions.
Gateway Windows XP

From reading these boards, I am not the only one having this problem. The referred to article did not apply to my problem. My computer was up-to-date, I had added no software, I hadn't added any new hardware, the cables were the same and functioning.
This is what I did. I plugged in my I-pod with "My Computer" screen open, when the icon appeared showing the removable disk was being read (contrary to I-tunes assertions that my I-pod wasn't viable)I clicked on that to see the stats on my I-pod. But, almost immediately, I-pod began downloading all of the new items I needed, pocasts and songs purchased.
I have one more I-pod to fix, I am hopeful this will work again.

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

Cannot read from the source file or disk

I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter

Zen - Can't Read from or Write to Your Pla

I recently bought a Creative Zen and had no problems with the software until recently one day when I was trying to work with a playlist, it said it could not read from or write to my player. I tried a different computer with a different operating system, installed the playlist manager disk on that computer, and got the same result.
Additionally, when I try to record something, the player freezes up. However, the big issue for me is not being able to manage my playlists at all. I can still download books and tunes and get updates from Creative, so that's not the problem.
Any help? I looked in the FAQ for this, but the link is broken.

Try the instructions in this article.
(24952)

Managed Metadata (Failed to read from or write to database. Refresh and try again. If the problem persists, please contact the administrator)

When creating a new site column of the managed meta data type in SharePoint2010, and you select "customize your term set", you are presented with one of the following errors:
- This operation cannot be completed. The term store may be unavailable.
- Failed to read from or write to database. Refresh and try again. If the problem persists, please contact the administrator

Hi,
I have been facing the same issue, however managed to resolve it.
This is due to the uncommitted statements. From Powershell try running the following script
#Connect to Central Admin, Replace the url with the environment specific URL
$taxonomySite = get-SPSite http://centraladmin:40000
#Connect to Term Store in the Managed Metadata Service Application, Ensure you put the right Metadate service application name
$taxonomySession = Get-SPTaxonomySession -site $taxonomySite
$termStore = $taxonomySession.TermStores["Managed Metadata Service"]
write-host "Connection made with term store -"$termStore.Name
#Connect to the Group and Term Set
$termStore.RollbackAll()
Hope it would help

How to read from and write into the same file from multiple threads?

I need to read from and write into a same file multiple threads.
How can we do that without any data contamination.
Can u please provide coding for this type of task.
Thanks in advance.

Assuming you are using RandomAccessFile, you can use the locking functionality in the Java NIO library to lock sections of a file that you are reading/writing from each thread (or process).
If you can't use NIO, and all your threads are in the same application, you can create your own in-process locking mechanism that each thread uses prior to accessing the file. That would take some development, and the OS already has the capability, so using NIO is the best way to go if you can use JDK 1.4 or higher.
- K
I need to read from and write into a same file
multiple threads.
How can we do that without any data contamination.
Can u please provide coding for this type of task.
Thanks in advance.

Cannot export video: AME cannot read from source, Installation Error

Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly. I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked. I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated.
Help?

Bummer!
Well, it was worth a shot, as externals/network drives have been known to cause similar.
Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
Good luck,
Hunt

Cannot read from menu file!

Hi All,
When I put the menu property for some form, the form shows this error:
cannot read from menu file
How to solve it?

Make sure the Forms exists in OS PATH if u r calling without the complete path like \\appserver\forms\Myform.fmx
put \\appserver\forms in ur PATH
also check
Check the calling form spelling
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

Cannot Read from or Write to Disk

Similar Messages

Maybe you are looking for