Cannot read print job Lexmark x264 and Yosemite

Hi guys
I have an printer Lexmar x264 over lan and I have an problem after update to Yosemite. Tried everything to remove device driver to return, to reset printer, to redefine IP address, no success...
Any help about it?
S.

Mike,
I've never heard about resetting the printing system on the Mac -- when I opened the Print & FAX icon in System Preferences, I don't see anything about reset -- are you suggesting I delete the Lexmark printer and re-add it?
In regards to the installation of Acrobat 5.x and Reader 8.1.2 on the same WinXP system -- that's on a physically separate PC -- not emulation on the Mac. And I installed Reader 8.x in order to take advantage of some newer PDF documents that require something more recent that 5.x.
And ultimately, on both systems .... what's up with the inability to print to the Lexmark printer, when every other application prints successfully. And, by the way, there is also an HP C3100 printer attached to the Mac via a USB cable ... and Reader 8.1.2 prints to it.
The lexmark optra printer is connected directly to the network here, and all of the PCs and the Mac (only 1) can print to the networked printer without problems -- except for Reader 8.x.
If you're suggesting I reset printers because of a known issue, I'd appreciate hearing the whole story before I start uninstalling and reinstalling printers.
Thanks for your reply.
Jerry

Similar Messages

  • Goto saving images into a pdf and a message comes up " cannot start print job"

    I an having a problem with my lightroom 4- I goto save my images into a PDF and it comes up " cannot start print job" and wont even save the images. What can be the problem, ive never had the situation before.

    Hi Sasha,
    Using Acrobat, you can create forms that are called AcroForms. The forms created in LC Designer are called XFA (XML Forms Architecture) and are more data centric. While both will open in Acrobat, they are completely different animals.
    The issue with users not being able to save the data with Reader is that the form is not Reader Enabled. You can Reader Enable a form using one of two methods:
    Reader Enable the form using Acrobat Professional (V8 or below) or Acrobat Standard (V9 or above). Note there are licensing restrictions.
    Reader Enable the form using the full server product Adobe LiveCycle Reader Extensions ES2.5. This involves additional licensing fees.
    Have a look here: http://assure.ly/etkFNU, at the features that are available depending on whether the user has Acrobat or Reader; if the form is Reader Enabled; and how the form was Reader Enabled.
    The issue of Reader Enabling would also apply to AcroForms.
    I don't think that you need to dive into LC Designer just yet, as forms created in LC Designer face the same issues about Reader Enabling as forms developed in Acrobat.
    If your usage complies with the EULA, then you could Reader Enable your form in Acrobat.
    Hope that helps,
    Niall

  • Pictures are not shown when saving to PDF.  Cannot Preview Print Job.

    Help! Pictures are not shown when saving to PDF.  Cannot Preview Print Job.

    I guess you need to fix it
    Or if you would like some help provide some information - there are no mind reader supporting this forum and we can only work with the information you give us - right not that is "it does not work"
    iPhoto has no "save to PDF" function - exactly what are you doing? and what exactly do you want to do?
    LN

  • Cannot cancel print job - error ePC 551

    I cannot cancel print jobs, when i click the cancel option I get and error code ePC551

    Resolved...just had to go into Devices and Printers, select the printer and cancel the job.

  • Cannot cancel print job on network B9180

    I have a B9180 network connected printer with an IP number. A print job is registered and cannot be printed or cancelled from the computer that created the job. I have cancelled the job on the printer using the X button because it would not cancel from the computer.. The computer has been restarted, but the print job is still registered in the printer cue (Vista 64) for the printer.  I can select the job and select cancel, the printer says it is cancelling, but does not complete the cancel.
    I cannot print any new jobs due to the bad job shown in the cue.
    Can someone tell me how can I cancel the bad print job and clear the cue on the computer? I have tried everything I know.
    Thanks
    Solved.

    By Pravin Chalise
    Big Computer, Kirtipur, Kathmandu, Nepal
    Please go through instructions carefully:
    Ist Method:
    a) Open your computer and go to printer (control pannl (your printer))
    b) Double click printer icon. It lists all the print jobs.
    c) Right click your que job>choose 'Delete' or 'Cancle'
    2nd Method:
    a) Go to spool folder eg: C:\WINDOWS\system32\spool\PRINTERS (in most cases)
    b) select all jobs which are in que.... and simply delete them.
    Thanks !!
    (tested on my computer at Canon LBP 2900)

  • I have a Officejet 8500 A910n. When printing a pdf the print job just stops and will not print.

    Only certain files the print job just stops and will not print in Adobe Acrobat X.  All other applications work fine.

    Have you tried downloading and installing Adobe Acrobat XI?  http://www.adobe.com/products/reader.html
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Cannot Cancel Print Job!!!

    Hi, I have tried everything, disconneting everything, but nothing works, the program apparently does not work, the normal way to just delete a job is not working, have hp deskjet f2210, and it will not cancel the print job no matter what I do! Any ideas? Thank you in advance for reading and trying to help me!

    Oh yes, don't you just love having to reboot your PC to clear up the print queue?  Well, I don't and have been using a little freeware app called "Stalled Printer Repair".  Google will find it for you.  I don't even think it needs to be installed.  You just run it.  I have found that it almost always cleans things up without having to kill processes and reboot.  Nice!
    --Larry

  • Cannot delete print job

    One of my print job is on permanent "hold." The problem is I cannot delete it (neither from the toolbar nor menu), nor can I resume it. I just stays permanently at the top of the print queue. Even after restarting the computer, restarting the printer, it stays there. How can I delete it? Is there some terminal command or such that allows me to delete print jobs?
    The printer is a HP J6480.
    It's not a major issue, but irritating. I have set the printer icon to "auto quit," but it never quits due to the held job.

    Hi a:
    Take a look at this discussion and see if it helps you:
    http://discussions.apple.com/thread.jspa?threadID=1511428
    Barry

  • HPf4280 Cannot cancel print job

    I have a print job in que that will not let me cancel. It is not "paused" please help
    Thanks!

    Hey @Ninja1987 ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    I understand you have a print job stuck in the print queue.
    Use the HP Print and Scan Doctor.
    Click here to download and run the Print and Scan Doctor >>> www.hp.com/go/tools
    Have a nice day!
    I worked for HP.

  • Print jobs keep starting and then error in print que

    I have a HP Photosmart 100D series printer. The print jobs keep freezing up in the que. The jobs start and then after a page or two the error message appears when checking the status.
    I uninstalled the printer and reinstalled
    I have download new drivers
    I have run the "HP Print Doctor" it gives a message to save work, close and programs and restart the PC and then restart the ulitity. I have done this and still get the message that it cannot fix the que error.
    What do you suggest as a solution to this frustrating problem?
    I  have Windows 7 Professional OS

    Hmm. I have an HP printer that's behaved fine, but I've moved it to my iBook (running Tiger) so I can print wirelessly.
    It may be an issue with the driver or the software. I'm guessing the software was written for the PPC machines, and that might be causing the problem.
    The way I've checked this is to open up "Activity Monitor" (Applications>Utilities) and find the processes related to your HP printer (usually begin with "hp") under kind what's shown?
    You might want to look into the CUPS idea presented earlier as it may give you better results.
    ~Lyssa

  • My iMac cannot send print jobs to my new epson WF-7010.

    It is connected to the computer through a USB port. I get a message: On Hold(Authorization required). I have administrative access to the computer, I have a laptop with 10.7 that can print to it.  So the Epson does in fact work, just not on my iMac. I've changed usb cables, and usb ports. Following Epson tech support assistance, I've uninstalled, re-installed, and repeated this multiple times.  I've unistalled and removed leftover files from the library/printers folder and then re-installed the driver. I can update firmware, do a nozzle check from the driver utility, but just not send print jobs.  Any suggestions on where else one might look?
    Thanks.
    - R

    If it prints everything too light then it's an issue with the printer and not iPhoto. I'd be asking Epson support.

  • Itune cannot read the contents of ipad and advice me reset ipad to factory setting

    itune cannot read ipad contents? need solution

    Tap Settings > General > Reset > Erase All Content and Settings.

  • Cannot cancel print jobs from queue in Windows

    We have some print jobs we sent to the Bonjour printer when we were off network, they still show in the windows queue, but we cannot cancel them, any suggestions?
    Matt

    Short of removing Bonjour, then reloading it, not much. Presuming you're using Windows, have you tried deleting them, then turning off the computer, then turning it back on? Sometimes that does it.
    Doc

  • Cannot read version 4 fcp project and associated files with the new 5.1.2

    I cannot read my fcp 4 version projects and associated files with the new 5.1.2 fcp.
    Please help!

    I bought the Final Cut 5 studio to use for my company but I have project files from version 4, which I would like to update. My G5 is running Tiger and Final Cut recognizes the old files as Final Cut Documents (the media is already on the G5) but will not open them or their associated quicktime files. I have no problem loading version4 to export the Masters but I would like to be able to upgrade the project files so that I can use them in my addition Studio Pro applications and touch them up in Shake. Also, I don't want to go and find FCP4 on the internet because it may have other problems.
    What do you suggest?
    Can FCP4 files be updated to version 5.1.2?
    Can I get a back dated version of FCP4 through Apple?
    Thanks for your time.

  • HT1338 since IOS6 update i cannot air print from my ipad3 and iPhone4. Any ideas??????

    since IOS6 update i can use Air print on my IPAD3 and IPHONE 4. Can anyone help??????????

    I have the same problem as do many others. Neither my iPhone 3 or 4 work since upgrading to ios6.
    All Windows based devices work fine it is just a problem with ios6, I think Apple are working on this.
    Was about to buy a mac laptop but now gone back to PC.
    I think all we can do is make a fuss to Apple to hurry them along.

Maybe you are looking for

  • Creating a role for t.code FBL1N

    Hi All, Creating a role (PFCG), I've to assign the t.code FBL1N only. In this role and for the t.code FBL1N, I've to exclude a certain Vendor Account Group. Could anyone help me? Thanks

  • How can I replace a damaged Image Capture in locked Lion Application folder?

    I am running a MacBook Air on 10.7.2. Image Capture is "damaged or incomplete" and cannot be opened. I have a copy of IC from my other mac running Lion, but cannot copy it into the Apps folder on my MacBook Air because IC cannot be modified or delete

  • Using the LAG function

    Hi all, using: Oracle9i Enterprise Edition Release 9.0.1.3. I have a table that looks basically like this: SQL> select labour_rate_id, organisation_id, commence_date_time, termination_date_time, labour_rate   2    from labour_rate   3  where organisa

  • Duplicate Candidate Check in iRecruitment

    Hi, Does irecruitment hold a functionality of duplicate candidate check? for e.g. One of my vendors have already supplied me with a profile "A", another vendor suppiles me with the same profile "A". But I want a check happening at the agency front it

  • How to  define and work with bind-variables without the dialog-box ?

    I want to select different tables with the same bind_variables, but do want not fill the bind-variables-dialogbox everytime I use the select statements because I could simple edit and bind this bind-variables once at the first select. select col1, co