Cannot read rows for monitor

hi,
Although there are rows in the table, when clicking any of the questions in the monitor tab "no rows returned" answer is shown in the new page. Does anyone know why this happens?

Hi,
Could you menion the steps you are following ??
Am not able to get the problem of how you are seeing no rows returned??
What user are you logged on ??
Thanks,
Anu

Similar Messages

  • Cannot read screen for near last installation step, just dots to click, no instructions

    My installation screens just have circles to clik on, no explanation as to what the dots are for...and a blank to fill in as to location, but no clue as to if it wants e-mail, po address, etc....so can't finish installation "next" till it's filled.. 

    Hi , Welcome to the HP Forums! I see that you are experiencing issues installing the the HP Software for your HP ENVY 4500 e-All-in-One Printer. I will certainly do my best to help you. Please go to this link, HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers to download the software for your printer. If you have already downloaded the latest software version.Try the following steps:Update Adobe Flash Player- Help / Installation problems | Flash Player | Windows.Check for Windows Updates- To check for updates.Restart the comoputer.Try to install the HP Software again.
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

  • Can not read values for profile option proxy_user_id in routine& Routine

    Hi all ,
    I developed a new form in oracle apps R12 and deployed in respective top ,After entering all the details when i am going to save the data i am getting the message like
    Can not read values for profile option proxy_user_id in routine& Routine and no action is taking place .
    Can some one please help me how to avoid this issue.
    Thanks in advance,
    Srinivas

    Hi Srinivas,
    Please check below Metalink notes. Although it is not same as your issue but it will give you way to enable 'VISIBLE' flag(if not done already)
    _'Cannot Read Value For Profile Option Proxy_user_id' Error While Trying To Create an AR Invoice [ID 1280915.1_
    Thanks,
    JD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Cannot read the next data row for the data set

    Hi,
    My report runs fine when I view in VS, data shows fine when I run the query in the data window, but when I publish it to the server, I get the above error. I am running SQL server 2005 RTM and I have re-deployed the entire solution.
    Any ideas?

    Hi All,
    Upon investigation found that there was an issue with converting varchar value to datatime datatype in Stored Procedure and that is why report was throwing error.
    I ran same report in BIDS and got clear error message
    An error has occurred during report processing. (rsProcessingAborted)
    Cannot read the next data row for the dataset xxx. (rsErrorReadingNextDataRow)
    The conversion of a varchar datatype to a datetime datatype resulted in an out-of-range value
    Once I corrected this, It is working fine.
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

    Hi,
         Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
    of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
    when I try open Lync monitoring service from web UI, 
    http://localhost/ReportServer_LyncMonitoring/
    Web UI is opening but Reports home page is not Accessible , Getting error Like
    "An error has occurred during report processing. (rsProcessingAborted)
    Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect"
    Please help me to trouble shoot this problem.
    Thanks,
    Rajarajan.D

    Hi Rajarajan.D
    You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Hello MacBook Pro Musicians- I cannot read sheet music from the ipad. It is too small. I want to connect a large monitor, hopefully wirelessly to my 13 inch macbook pro. what would I need to connect ? Any suggestions on how to keep monitor from falling?

    Hello Macbook Pro Musicians--I cannot read sheet music from my 13" macbook or from an IPad. The print is too small for these aging eyes! So I need to get a large monitor to attach to the Macbook.  I want the monitor to be connected wirelessly or using a blue tooth.  This will eliminate alot of potential mishaps
    when playing out.  Also I am having a time figuring out how I am going to safely keep the monitor on somekind of music stand without falling!!!  Can anyone help me with this?

    Hi Julius,
    As you can see in my profile section, my MBP is older by 5 years, 2GB RAM and with regards to question 1 (Q1), has no problems with having all those programs open at the same time with the possible exception of Photoshop since I use Gimp instead. With twice the RAM and much overall much better specs, Photoshop shouldn't be an issue. But you listed some other activities that might need that additional RAM. But the advise most give is to not get it from Apple but from a third party.
    Q5 - I always get Apple Care. Only had to use it once but it paid for itself that one time.
    Sorry, can't help you much with the questions you really want answered since I won't have a new MBP until (hopefully) next week but for Q4, I believe it depends on the peripheral. My current monitors are too old to allow them to be hooked up in a chain. Supposedly, if the monitors do have the ports, you could via the MBP Thunderbolt port. The speeds are also dependent upon the peripheral. If the external hard drive is using a USB 2 port, you are limited by that speed (480 Mb/s). If it has a Thunderbolt port, then from what I understand, we, my friend, are in for some great times because I believe your RAM will have the ability to access data as fast as it can take it at 10Gb/s (and if will need those kinds of speeds, the 8GB of RAM may be the way to go). The Thunderbolt demos on YouTube where they are accessing four video files from a Raid drive, then sending them back out via Final Cut Pro to a monitor are amazing. I'll probably never push this machine to anywhere near it's limits but I can't wait to see what others do.
    Peace,
    Jeremiah

  • Row cannot be located for updating. Some values may have been changed...

    Hello,
    I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
    I've a problem during insert of a record using recordset method (AddNew).
    The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
    I know that problem is caused by a Before Insert trigger that I CANNOT change.
    Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
    I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
    I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
    I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
    Other important info:
    Cursor = adUseClient (and i cannot adUseServer)
    Provider= MSDAORA (version 9.2...)
    Oracle server = 9.1
    Trigger causing problem = BEFORE INSERT (for each row)
    Thanks in advance
    Luigi

    Hello,
    I have a legacy application written in VB6 and using Oracle OLEDB Provider (version 9 and updated to the last ones from oracle site)
    I've a problem during insert of a record using recordset method (AddNew).
    The returned message is "Row cannot be located for updating. Some values may have been changed since it was last read. "
    I know that problem is caused by a Before Insert trigger that I CANNOT change.
    Trigger does not change any primary key values !!!. It put only some default values on other not rilevant columns.
    I tried to use the recordset Property option "Update Criteria" = adCriteriaKey without success !
    I had same problem with SQL Server but i solved putting into the trigger SET NOCOUNT ON.
    I think problem is related to the fact that ADO tries to calculate number of affected rows and for doing that it use a where clause built on the changed columns but using values it had on the client.
    Other important info:
    Cursor = adUseClient (and i cannot adUseServer)
    Provider= MSDAORA (version 9.2...)
    Oracle server = 9.1
    Trigger causing problem = BEFORE INSERT (for each row)
    Thanks in advance
    Luigi

  • I have a Windows 8.1 machine.  I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

  • Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.

    Does anyone know of an e-reader app for the iphone that has text to speech capability? I have a Kindle 3G that can read whole pdf documents and books but I cannot figure out how to do it on my iphone 4.
    All of the apps I have found on the App store either do not have the text to speech capability or if they have it they will only read a page at a time or simply read the text you paste into their window. I really do not understand what is so difficult about having this feature as Kindle provides it--though Amazon does not make the feature available on its iPhone 4 app.
    Please help.

    thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
    I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
    thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

  • Adobe reader for mac cannot read pdf

    I have the latest version of Adobe Reader, the latest OS for Mac, and the latest Safari browser update.  but after installing Reader, the ability to access a PDF has become mostly restricted. the full gray screen comes up and a document cannot be accessed.  what should I do?

    There should be an icon that instructs you to trust the Adobe Reader application for this website. Click on it to approve the action. This is part of a new security practice.

  • Cannot read CD or DVD built for region 4

    Compaq Presario C762NR Notebook PC that's my machine with Windows 7 - 32
    I have few CDs - DVDs built for region 4 (South America) with soft wares that the hard drive cannot read at all.
    I had change the CD drive configuration to region 4, WINDOWS 7 system locale, and all remaining configuration to Brazil standard.
    Neverthe less, the CD - DVD continues to refuse reading the disks.
    Is there any missing configuration to change and free the CD-DVD drive?

    CesarAlmeida wrote:
    Compaq Presario C762NR Notebook PC that's my machine with Windows 7 - 32
    I have few CDs - DVDs built for region 4 (South America) with soft wares that the hard drive cannot read at all.
    I had change the CD drive configuration to region 4, WINDOWS 7 system locale, and all remaining configuration to Brazil standard.
    Neverthe less, the CD - DVD continues to refuse reading the disks.
    Is there any missing configuration to change and free the CD-DVD drive?
    You said your Region 4 on the drive but what are the format region of the dvd media itself? It sounds like your trying to read media that is for another region and thus it can't read it. Or second the drive is no longer working and when was the last time your did  a firmware update to the OD itself?? Or update the laptop firmware to the latest firmware?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • I have all my photos but for some reason iphoto cannot read them?

    I recently backed up all my photos and reinstalled Mac OS X 10.5.6. iphoto would not launch so I installed the iphoto Library Manager. now I can get iphoto to run but when I try to add my photos or direct it to a iphoto library I get the error message...
    The following files could not be imported (they may be unrecognized file type or the files may not contain valid data)
    I have also gotten...
    The iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it.
    I have gone in and tried to change the settings of the files to read/write and put in my password but then I get the " The following files could not be imported (they may be unrecognized file type or the files may not contain valid data)" error message?
    Please help. I have all my photos but for some reason iphoto cannot read them? They are jpg files.
    Message was edited by: Jengirlie

    I recently backed up all my photos
    How did you do this?
    These Unable to Import and Locked Library messages are common symptoms of a damaged database file. As iPhoto Library Manager is unable to rectify the situation you'll need to do a Manual Rebuild as described in this article
    http://docs.info.apple.com/article.html?artnum=107947
    Regards
    TD

  • I cannot get my screen reader to read my PDF format at all. I am using Window-Eyes 9.0 Screen Reading Program for the blind.

    I cannot get my screen reader to read my PDF format at all. I am using Window-Eyes 9.0 Screen Reading Program for the blind.
    HELP!!!

    For information regarding Accessibility, see here:
    http://www.oracle.com/us/corporate/accessibility/products/index.html
    You can also find additional configuration in the older Forms documentation, however most will still apply in newer versions although file version references and file locations may differer.
    http://docs.oracle.com/html/B10668_05/chap_forms.htm#g1095470

  • While signing a .XML file a message "cannot read the file for signing" is displayed. What is the solution.

    An official site incometaxindiaefiling.gov.in requires .XML files to be uploaded. When .XML files are uploaded without digital signatures there is no problem. When digital signatures are required for signing the same a message 'CANNOT READ THE FILE FOR SIGNING" is displaced. It happens with CHROME and IE also. The solution which I have devised is that I copy the .XML files in a folder called FAKEPATH in C: drive and pick the file for signing from this folder. The browser allows the file to sign with digital signatures. What is the solution.
    Ashish Goel

    Ashish,
    You might want to submit this feedback at https://incometaxindiaefiling.gov.in/e-Filing/Services/Feedback.html instead.

  • Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?

    Hi, I godt 2 Questions: 1) My Adobe PhotoShop Elements 10.0 for MAC cannot read the RAW files taken with the new Canon 7D Mark II camera. 2) My Photoshop Elements has changed from the danish language to german language, how do I put this back ?

    You're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

Maybe you are looking for