Cannot read track number box if using dark color configuration

The color options are fantastic in 3.0 but for one single problem. If configured to a dark color - I use a very deep blue - the Track number box in multitrack mode cannot be read without putting the cursor in the window (then it blinks brightly because it is highlighted and ready to be relabeled). It seems that it needs to be programmed to show against any color configuration, without having to place the cursor there.

>So who decided to "fix" it?
Hmm... this all happened with AA2.0 initially - and that was done to an Adobe corporate (grey) plan, to all intents and purposes. There are some things that are bigger than all of us, it would seem...
I suppose that in an ideal world, a lot of people would say that being able to 'skin' Audition would be the answer, but that doesn't really do it for me, I'm afraid. My attitude to this is quite simple; Audition is a tool, and I don't care what colour it is, as long as it works properly. Yes, it should look okay, but mostly that's to do with being able to see what's necessary at any given time, and by and large, I can.
But, doing what you want could be regarded as an option, and as I've said elsewhere, I think that options are a Good Thing. The only snag is that I rather suspect that more colour options will come some way down the priority list -
unless, that is, they are easy to do. In that case you perhaps stand a better chance!

Similar Messages

TS3276 Cannot read email content in Mail using MacBook Pro

I am not able to read my email messages most of the time. I can only see the header section. I have tried getting out of Mail and then getting back in and sometimes this allows me to read my emails. My email service provider is Gmail. I can read my emails through my Gmail account on the web but not in Mail.

Rebuilding didn't help, then you say: The problem seems to have been resolved...
Is it ok or not? Sorry, but it's a little confusing.
Easy way to check your internet connection ...
Open System Preferences > Network
Click Assist Me > Diagnostics
Select the configuration on the right.
If any buttons are red, click Continue.
I just noticed that your profile indicates your Mac has v10.7.2 installed.
If that is the case, updating your system software may help the connection issue.
Click Software Update from the Apple menu.
The most recent version for Lion is v10.7.5
message edited by; cs

IPhoto cannot read my Kingston 8GB card

I posted an issue under iMac
https://discussions.apple.com/message/17073733#17073733
that probably should have been posted to this iPhoto community. I have a new Kingston 8 GB SD card that formatted fine in my Canon SD-1200 digital camera. The problem is I cannot get the card to mount on my Apple iMac running OS X 10.7.2 with iPhoto 9.2.1. What is weird is I can get my wife's Apple MacBook Pro to mount the card.
My iMac does not not have card slot so I have to use an iConnect USB adaper that works fine on the iMac with a Kingston 2 GB SD card. I maintain iPhoto on on the iMac so I am dead in the water because I cannot get the iMac to mouth the Kingston 8 GB SD card
I now suspect the iConnect SD Card Reader/Writer may be the weak sister

I agree the weak sister is the iConnect SD Card Reader. As a test the 8 GB Kingston SD card can be read using the card reader slot on the Mac Book Pro; however, the same MBP cannot read the 8 GB card using the iConnect Reader.
I pulled this data from the MBP's System Information and it looks like the Alcor Micro Corp device is the problem child. Maybe Santa will put a new reader in my stocking
Mass Storage Device:
Product ID:          0x6331
Vendor ID:          0x058f (Alcor Micro, Corp.)
Version:          1.02
Serial Number:          058F0O1111B
Speed:          Up to 480 Mb/sec
Manufacturer:          Generic
Location ID:          0x26200000 / 3
Current Available (mA):          500
Current Required (mA):          250
Internal Memory Card Reader:
Product ID:          0x8403
Vendor ID:          0x05ac (Apple Inc.)
Version:          98.33
Serial Number:          9833
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple
Location ID:          0x26500000 / 2
Current Available (mA):          500
Current Required (mA):          500

Authorization object for requirement tracking number

I want authorization object for requirement tracking number in PR ME51N.
I have to make control over User against requirement tracking number that particular user can use this tracking number only while using ME51N.

Check the t code su21 whether your requirement is fullfill or not.
If not make a authorization object with the help of abaper and assign this object to the particular user in their profile.
Hope this is help.

Unable to edit the tracks number

Having updated iTunes 12.01 with Yosemite 10.10.2 I'm unable to edit the tracks number, as I used to do, select a song then get info and edit whatever I want, everything looks fine except the possibility to edit the track number. Any thought?

You can still edit the track number ... it just involves a scrolling action with the new iTunes.
Go to the song's "Get Info" as you used to do. Once you open the "Details" tab, scroll down to reveal the track number which you can edit.

"Cannot read Rebecca's iPod..." error message...

We keep getting an error saying "Cannot read Rebecca's iPod, please use the iPod installation software to update". When we do that it uninstalls and then we reinstall it but it keeps saying the same thing. We've wiped everything off and are trying to start over but it's not working.
Anyone know why ?
Thanks !

Make sure all the software is up to date...
iTunes
iPod Updater
Updating iPod's Software
Also, see if this helps at all (not sure, but try)...
Disk Cannot Be Read or Written to error when syncing iPod
btabz

Zen Micro, WMA, Track number tag

Here is my problem : the track number tag of all my wma files contains 0(zero) on my Zen Micro, whereas it is fine on my PC !
I tried to use only the WM/TrackNumber tag... no succes !
I tried to use only the WM/Track tag... no success !
I tried to use both tags... no success !
Next, I modifed the track number tag directly using the Zen Micro Media Explorer. This works BUT if I transfer the wma file from my audio device to my PC and back from my PC to my Zen Micro then the track number tag contains 0 again !
Are you guys aware of this bug ?
Is the Creative tech support aware of it ?
Thank you in advance for any help.Message Edited by giom on 04-2-2005 2:40 AM

OK, just for you (and to satisfy my own curiousity), I ripped?two tracks using?the WMA 9. codec and Easy CD-DA Extractor?(with metadata enabled of course) at 64 kbit/s to the PC. I copied it using MediaSource 3.0.09 to my Zen Micro (.02.05). The track data including track number is still there.
Before... (on the PC)
<IMG src="http://www.stainlesssteelrat.net/Pictures/20050420/Image.jpg">
After... (on the Micro)
<IMG src="http://www.stainlesssteelrat.net/Pictures/20050420/Image2.jpg">Message Edited by SSR on 04-2-2005 0: AM

Cannot read contents of iPhone.

Updated both iPhone and iTunes and now receive the following message:
iTunes cannot read the contents of the iPhone "************ iPhone". Go to the Summary tab in iPhone preferences and click Restore to restore this iPhone to factory settings.
I don't want to restore to the factory settings. I am afraid of losing everything I have on my iPhone.

In my case at least, I knew it was not a hardware problem because iPhoto opened and read photos off the phone with no problem. This link gave me the hint: <http://modmyi.com/forums/general/729191-itunes-cannot-read-contents-iphone.html>. Using iExplorer or iFunbox, find a file called Media/iTunes_Control/iTunes/iTunesDB or Media/iTunes_Control/iTunes/iTunesCDB. In my case it was the latter, and it was 0 bytes in length. An interrupted or failed sync must have left it there. Deleting it, with iTunes closed of course, allowed iTunes to see the phone and sync normally with it when it was next opened. Hope this helps somebody.
Best,
David

Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

gyanu1812 wrote:
This is the snapshot of an email that if you have sent it to me.
No, that is the snapshot of my posting in this forum. Here is a picture of my sent message. Are you not getting my emails sent directly to you?

I recently got a new laptop and my photoshop elements needs my serial number...i cannot locate on my box, disk sleeve and there isn't an insert??

I recently got a new laptop and my photoshop elements needs my serial number...i cannot locate on my box, disk sleeve and there isn't an insert??

Check your Adobe account online. If you registered the software when you first installed it then the serial number might be available there.

Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response

Power ran fully out on my MacBook Pro and is currently recharging. However, cannot get it to restart. Totally dark and have tried to deactivate via power button, keys and track pad but get no response

Sulapeace,
for how long has your MacBook Pro been recharging? Has the light on your MagSafe connector changed color since you’d started recharging it? What do your battery level indicator lights show when you press the button next to them?

Cannot find serial number on Photoshop Elements 13 box?

I purchased Adobe Photoshop Elements 13 from Amazon, received the box, but cannot find a serial code.
There was no insert in the box, it's not on the DVD sleeve, and the Adobe sticker on the back of the box was covered by another barcode sticker. When I tried to carefully remove the top sticker it tore the lower one and now I cannot read that either. What do I do?

See if anything in here helps: http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Requirement Tracking number used in WM modules

Dear all,
What are the different Requirement Tracking number used in WM modules.
Like we use 632 for auto TO creation for outbound delivery.
please suggest me
Regards,
Rock

Hi,
Please check the Following Link may be help you.
Requirement Tracking Number
Regrds,
PK.

I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number

I have an education version of cs 6 creative suite, I have the box and used in once on my old laptop I am now trying to find serial number to reuse on new laptop but only have product code and product number

Hi Sophie,
Normally you can find your serial registered to your AdobeId. To find it please login to the Adobe website and check if you did register it to your account.
Serial number, Redemption, and Product codes | Student & Teacher Editions
In general you will go true a educational verification afterwards you get the serial. So its in your email or account. If you still have issues get in contact with the chat team to get help.
Good luck!

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Cannot read track number box if using dark color configuration

Similar Messages

Maybe you are looking for