Cannot reboot after 7.1.1 upgrade...help!

I just downloaded the latest upgrade 7.1.1 to my Imac desktop. My computer restarted on its own in safe mode. After watching the 'gray bar' complete its process for 20-30 minutes, my computer shut down automatically. After several attempts, it will not reboot, just repeat the same process. I restarted in recovery mode and used my Disk Utility checking my volume using repair disk with nothing noteworthy...still no luck.
Anyone having similar issues after recent upgrade? Anyone have a solution for me??? Please!?

The iOS is for iDevices and will not run on a Mac computer.
The Mavericks OS X 10.9.2 is the latest system available to Mac.
There was a security update a few days ago, for several items.
So you must be referring to something other than the OS X.
What does 'About this Mac' say?
Did you try SafeBoot, or use OS X Utilities to run Disk Utility
and repair disk/repair disk permissions, to check/fix startup?
It may need more, depending on what is really going on.
Details are everything.
Good luck & happy computing!
edited

Similar Messages

Re: Need Help! Dell poweredge T630 cannot reboot after trying to add new memory

It fail to initialize the iDRAC

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

MYOB cannot print after 10.4.4 upgrade

Hello ALL
I have tried various solutions to solve this (including those in another post).
Using iMac G5, MYOB Acc+ V14, OS10.4.4, HP Laserjet 2600N, Canon iP4200 inkjet.
All was OK until the upgrade, now every app will print apart from MYOB.
Tried repairing permissions, running MYOB from Desktop, removing prefs, re-installing printer drivers, re-installing MYOB and I have now given up.
Anyone?

Answering my own thread here, but in case it helps anyone here.
I have solved my problem, with the help of MYOB and this might apply to others.
Apparently in the 10.4.4 release either the location of the actual fonts that are installed have changed, seems to effect Optima and Palatino in my case. The forms I was trying to print contained these fonts, but MAC OS has changed them and my font manager did not have them active.
But, MYOB was not reporting the missing fonts, instead my print jobs were just disappearing.
So, I made sure that my font manager kept these two fonts active, even after quitting, problem solved.
Or, if you cannot do this, just experiment, with the file you are trying to print, change the font to TimesNewRoman or Arial and see if that sorts it. If it does, you are going along the right lines.

Cannot Print After Installing Latest Security Upgrade

Yesterday I downloaded and installed the new Security Upgrade from Apple. Today after restart I cannot print with my Brother HL-1440 printer. I downloaded and reinstalled the printer driver. Still doesn't work. Thank you Apple.
Any suggestions will be appreciated.

Blawrimore,
Have you had a chance to read through the support docs at the Printers website?
I found these two that may pertain somewhat to your problem that you may want to look at:
http://solutions.brother.com/Library/faq/printer/prfaq0797/prfaq0797.html
and
http://solutions.brother.com/Library/faq/printer/prfaq0796/prfaq0796.html
Looks like you are supposed to delete unnecessary printer drivers of other manufacturers and to be sure you "reselect" the printer in Print Center after downloading their drivers.
And, I'm sure you downloaded the correct driver, but certainly wouldn't hurt to double check that it is the correct driver. (that sounds like something "I" would do.....)))
Sorry if these don't help any,
littleshoulders [:-)

Cannot Login after 10.4.11 Upgrade

I recently upgraded my G4 Quicksilver Power Mac from 10.3.9 to Tiger. The install DVD was for 10.4.6. The DVD installed fine, then I ran the system updater to get the remaining 10.4 updates. It updated Java no problem, then the Mac OS X Update Combined (PowerPC) came back with an error saying the digital signature is incorrect. I then went to the Apple Support Downloads site, and attempted to download an update with Safari. I tried the combos for 10.4.8 thru 10.4.11, and all of them failed verification after attempting to open the download. Very strange. So I went to my macbook, downloaded the 10.4.11 combo update ok, and put it on the G4 with a thumb drive. It opened the dmg file fine, I ran the update, and the system re-booted. At some point before the login screen, it hung up and I had to power it down. After restarting, it now gets to the login screen, and sits there until I move the mouse pointer into the login window. It then hangs there with the spinning beachball. I'm not able to login at all. Same problem when booting in Safe Mode. I've used the DVD to startup the system, and can access the HD using a terminal window. I ran the disk utility, and the HD is fine. I looked at the system.log and don't see anything there that I can identify as something I can fix. There is a segmentation fault at time 22:57:47. I'm including the log below, maybe someone can get something from it. I thought I'd try to re-install the 10.4.11 combo update, and haven't been able to mount the dmg file while running off the DVD. To do that I need to create a root directory on the HD, but it's read-only when running from the DVD. While in the hung login state, I cannot remotely login to the G4 using ssh from my macbook.
So at this point I'm stuck short of trying to re-install from the DVD using the option to archive the current OS before install (the installer recognizes that it is now at 10.4.11, and so it won't do a normal simple install again.) I'd really like to try to fix what is there or figure out how to re-run the 10.4.11 update, before doing the archive/install/10.4.11 update again. Don't want to do all that and end up in the same place.
I'm hoping someone can give me some ideas. Below are the system profile and the system.log. Sorry for the long post. Thanks!!
System Profile (prior to the upgrade):
System Software Overview:
System Version: Mac OS X 10.3.9 (7W98)
Kernel Version: Darwin 7.9.0
Hardware Overview:
Machine Model: Power Mac G4
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.12 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.4f1
GeForce2 MX:
Type: display
Bus: AGP
Display Type: CRT
Slot: SLOT-1
VRAM (Total): 32 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0110
Revision ID: 0x00a1
ROM Revision: 1055
Display:
Resolution: 1280 x 960 @ 85 Hz
Depth: 32-bit Color
Mirror: Off
Online: Yes
Main Display: Yes
system.log:
Jan 23 22:57:41 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 23 22:57:37 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[55]: starting
Jan 23 22:57:42 localhost kernel[0]: vmpagebootstrap: 285335 free pages
Jan 23 22:57:42 localhost kernel[0]: migtable_maxdispl = 70
Jan 23 22:57:39 localhost memberd[64]: memberd starting up
Jan 23 22:57:42 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 23 22:57:42 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 23 22:57:42 localhost kernel[0]: using 2949 buffer headers and 2949 cluster IO buffer headers
Jan 23 22:57:42 localhost kernel[0]: Extension "com.apple.driver.KeyLargoATA" has no kernel dependency.
Jan 23 22:57:42 localhost kernel[0]: Adaptec warning: Resetting SCSI bus.
Jan 23 22:57:42 localhost kernel[0]: USBF: 18.411 AppleUSBOHCI[0x1e98800]::start OHCI controller will be unloaded across sleep
Jan 23 22:57:42 localhost kernel[0]: USBF: 18.412 AppleUSBOHCI[0x1ff7800]::start OHCI controller will be unloaded across sleep
Jan 23 22:57:42 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 000393ff fe1961bc; max speed s400.
Jan 23 22:57:42 localhost kernel[0]: enableClockSpreading returned with 0
Jan 23 22:57:42 localhost kernel[0]: Extension "com.apple.driver.iTunesPhoneDriver" has no kernel dependency.
Jan 23 22:57:42 localhost kernel[0]: Security auditing service present
Jan 23 22:57:42 localhost kernel[0]: BSM auditing present
Jan 23 22:57:42 localhost kernel[0]: disabled
Jan 23 22:57:42 localhost kernel[0]: rooting via boot-uuid from /chosen: 4A51B8CB-828B-3C9B-81A0-A465AE207441
Jan 23 22:57:42 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 23 22:57:42 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f2000000/AppleMacRiscPCI/mac-io@17/AppleKeyLargo/ata- 4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevi ce/IOBlockStorageDriver/WDC WD800BB-40BSA0 Media/IOApplePartitionScheme/Untitled@5
Jan 23 22:57:42 localhost kernel[0]: BSD root: disk0s5, major 14, minor 5
Jan 23 22:57:41 localhost lookupd[63]: lookupd (version 369.5) starting - Sun Jan 23 22:57:41 2011
Jan 23 22:57:42 localhost kernel[0]: jnl: replay_journal: from: 1236992 to: 2142720 (joffset 0xd2cab4000)
Jan 23 22:57:41 localhost DirectoryService[71]: Launched version 2.1 (v353.6)
Jan 23 22:57:42 localhost kernel[0]: Jettisoning kernel linker.
Jan 23 22:57:42 localhost kernel[0]: Resetting IOCatalogue.
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 2
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: Matching service count = 4
Jan 23 22:57:42 localhost kernel[0]: NVDANV10HAL loaded and registered.
Jan 23 22:57:42 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jan 23 22:57:42 localhost kernel[0]: UniNEnet: Ethernet address 00:03:93:19:61:bc
Jan 23 22:57:43 localhost launchd: Server 3107 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[63]: exited abnormally: Hangup
Jan 23 22:57:43 localhost lookupd[78]: lookupd (version 369.5) starting - Sun Jan 23 22:57:43 2011
Jan 23 22:57:43 localhost xinetd[59]: xinetd Version 2.3.11 started with libwrap options compiled in.
Jan 23 22:57:43 localhost xinetd[59]: Started working: 0 available services
Jan 23 22:57:43 localhost diskarbitrationd[62]: disk0s5 hfs 4A51B8CB-828B-3C9B-81A0-A465AE207441 Macintosh HD /
Jan 23 22:57:44 localhost kernel[0]: NVDA,NVMac: vram [98000000:04000000]
Jan 23 22:57:44 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jan 23 22:57:44 localhost mDNSResponder: Adding browse domain local.
Jan 23 22:57:45 localhost loginwindow[88]: Login Window Started Security Agent
Jan 23 22:57:45 XXXX-Computer kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Jan 23 22:57:45 XXXX-Computer configd[60]: setting hostname to "XXXX-Computer.local"
Jan 23 22:57:47 XXXX-Computer launchd: Server 4673 in bootstrap 1103 uid 0: "/System/Library/CoreServices/coreservicesd"[86]: exited abnormally: Segmentation fault
Jan 23 22:57:48 XXXX-Computer launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[78]: exited abnormally: Hangup
Jan 23 22:57:48 XXXX-Computer configd[60]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jan 23 22:57:48 XXXX-Computer configd[60]: posting notification com.apple.system.config.network_change
Jan 23 22:57:48 XXXX-Computer lookupd[100]: lookupd (version 369.5) starting - Sun Jan 23 22:57:48 2011
Jan 23 22:57:48 XXXX-Computer ntpdate[112]: no servers can be used, exiting
Jan 23 22:57:49 XXXX-Computer configd[60]: target=enable-network: disabled
Jan 23 22:57:53 XXXX-Computer mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 71.243.0.12.

Have you tried starting in Safe Mode (hold shift key down while starting, be very patient).
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://support.apple.com/kb/HT1564]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
[Mac OS X 10.4, 10.5 - Computer shuts down during Safe Boot|http://support.apple.com/kb/TA24054]
Safe boot mode runs a directory check command similar to that used by Disk Utility's repair. In Tiger it ignores some stored information (cache) that is normally read that speeds up the boot process, and it moves some other caches to the trash. It also uses only System fonts and disables all Startup Items, third party items, and any Login Items.

IPad mini retina constantly reboots after iOS 8.1 update - help!

Hello,
I've downloaded on iPad mini Retina 16 GB iOS 8.1 update and installed it directly from the device (so no iTunes involvement). After it got installed with black apple on white screen (process seemed to be finished) - it started rebooting, but instead of starting up it shows shortly (for just a second) blue screen, after goes black and then reboots again - and all this in constant flux: white screen with black apple - blue flash - black screen - white screen with apple. Connecting to iTunes doesn't make anything - it doesn't recognise the device while in state of reboot.
What can I do?
Help!

Hey there,
Got exactly the same problem here. Can't even reset/ shut off the device, so it keeps on flashing with the blue screen.
Ipad Air 1

ITunes, Desktop, Dock, username resets each reboot after 10.4.4 upgrade

My whole desktop goes back to default - my files and iTunes and applications are under a username1, username 2, username3, etc. each time I logoff and log back on. I tried the username_new and idisk restore and notheing helps. It's like Groundhog Day (the Bill Murray movie) -- I configure my desktop, restore my Dock with my apps, reimport my iTunes library and then logoff and back on and it all 'disappears' and goes back to like it was when I first got it out of the box. I upgraded to 10.4.4. I try to rename my accounts and my permissions on iDisk are invalid, my keychain keeps popping up and asking for my password every 5 to 10 minutes, etc., even though I gave permissions in keychain access, etc. Any guidance would be greatly appreciated.

Kevin's tip did work in my case ... after exiting iTunes
(6.0.4 btw), then relaunching Front Row (which took quite
a awhile; I have some 60GB of music), Front Row started
working again.
A clue perhaps: I have my screen saver set to use iTunes
artwork. Immediately after the 10.4.6 upgrade, the screen
saver said something like "you have no iTunes artwork". It
appears that, after the upgrade, some process needed to run
to index my music library in order to get everything
working right, or something like that.
A search of my disk, after I fixed things up by letting
Front Row relaunch iTunes, showed just some plists getting
updated at that time: com.apple.iTunes.plist,
com.apple.desktop.plist, com.apple.systempreferences.plist,
com.apple.screensaver.[MACaddr].plist. So maybe zapping
one or more of those plists might have helped matters ...
at any rate, my Front Row is back in business.
17" iMac Duo Mac OS X (10.4) also 12" iBook G4, 15" iMac G4

Cannot reboot after installing OS X Lion

I have just purchased and installed OS X Lion, as an upgrade to snow leopard. A message told me that it had been successfully installed, and to reboot. The reboot however just hangs, and I now just have a grey screen of death.... My mac book pro has now been out of action for over 5 hours.... Any suggestions please?

You will need to try reinstalling:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Cannot launch After Effects CS6 or CC HELP!!!

When i try to launch CS6 I get this message:
You can't use this version of the application "Adobe After Effects CS6" with this verson of OS X.
You have "Adobe After Effects CS6" 11.0
When i try to launch CC this message:
You can't use this version of the application "Adobe After Effects CC" with this verson of OS X.
You have "Adobe After Effects CC" 12.0
My Creative Cloud desktop App Home page says
Your Home Feed is Empty
Get the most out of Creative Cloud
Install Adobe Apps
when i click on it, it goes to my Apps page that shows that i have 30 Apps, all Up to date
I have recently updated to Mac OS 10.9 and I saw that there's a patch on this page:
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5696&fileID=5715
but when i tried to install it the message reads:
Update Failed
Updates could not be applied
Please contact your Administrator if you wish to apply updates on your machine. Updates have been suppressed by the Administrator.
If the problems persist, contact customer support for further assistance.
All other Adobe applications seem to be OK though Premiere CS6 is terribly unstable - crashes A LOT.
I am in the middle of a project and I have a deadline. PLEASE HELP!!!

Hi lulugrrrl,
Please follow the below mentioned steps:
1. Enable root account: https://support.apple.com/kb/PH14281.
2. Follow the knowledge base article and install the patch: http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html.
Regards,
Romit Sinha

IPhone 3GS cannot reboot after reset of data

Hi, I have an iPhone 3GS that is not able to reboot or restart. It just gets stuck in the apple screen forever. I recently tried to reset the data in the phone. This is the result....

Follow the below steps and you are all set no worries:
1- shutdown your iphone with the hard reset "home button and power for 10 second"
2- connect the usb cable to the pc but NOT to the iphone"
3- open itunes
4- while the iphone is off, press the home button for 5-10 seconds then plus the other end of the white connection cable into the iphone
5- do not remove your finger from the home button
6- itunes will detect it and you can now restore it
I got this info from a good teacher it worked fine for me. Hope it helps you too.

Mountain Lion cannot reboot after I used windows 7 with bootcamp

I go to bootcamp partition and run windows 7 without any problems.
Then I restart and try to use Mountain Lion on an encrypted partition. It keeps rebooting.
Then I keep trying until I can go back to mountain lion. I don't know what I do that makes it work. I keep shuting it down and trying again, safe mode whatever.
Once I finally get Mountain Lion to start, it appers to be working perfectly.
The error when I can finally use mountain lion again is this:
Interval Since Last Panic Report: 214700 sec
Panics Since Last Report:          2
Anonymous UUID:                    0DB82237-2402-D8D5-1417-B0952197DE8E
Mon Dec 24 12:43:41 2012
panic(cpu 0 caller 0xffffff80130b7bd5): Kernel trap at 0xffffff801302e906, type 12=stack bounds, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8085a1e000, CR3: 0x0000000015d48000, CR4: 0x0000000000000660
RAX: 0x36583b85c59a0096, RBX: 0xffffff801e1b6000, RCX: 0x0000000009000000, RDX: 0xffffff807f9b8078
RSP: 0xffffff808b1dbe40, RBP: 0x01ffff808b1dbeb0, RSI: 0xffffff807f9b8068, RDI: 0x0000000000000000
R8: 0xffffff80136bec60, R9: 0x0000000000000000, R10: 0xffffff801e0422b0, R11: 0xffffff801367de88
R12: 0x0000000000000001, R13: 0x0000000000000000, R14: 0xffffff801e1b8000, R15: 0x0000000000000000
RFL: 0x0000000000010046, RIP: 0xffffff801302e906, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0xffffff8085a1e000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808b1dbae0 : 0xffffff801301d626
0xffffff808b1dbb50 : 0xffffff80130b7bd5
0xffffff808b1dbd20 : 0xffffff80130ce4ed
0xffffff808b1dbd40 : 0xffffff801302e906
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x1ffff808b1dbeb0
BSD process name corresponding to current thread: kernel_task
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000012e00000
Kernel text base: 0xffffff8013000000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 1349189652
last loaded kext at 314691811: com.apple.driver.XsanFilter          404 (addr 0xffffff7f94d27000, size 20480)
loaded kexts:
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.driver.AppleMCP89RootPortPM          1.11
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x384A53463235363634485A2D314731443120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2

You can install Windows in BootCamp (it will be a fresh installation) and you can remove the existing VM installation. Windows will run faster in Boot Camp than it will in a VM (parallels is a VM).
Please note that MacBook Pro's have 2 ram slots, and they will both be occupied with a 2G chip in a standard configuraton, there will be nowhere to install the other 4G that is in the mail. Return it and order 2 x 4G chips and remove the 2 x 2G chips already fitted.

My Mighty Mouse does not turn on after reboot after my Snow Leopard upgrade

I am having issues with my wireless mighty mouse, it does not turn on automatically like it used to and now I have to turn it on and off for my Mac to see the mouse again. It will them connect any help?

Hello dw:
For future reference, there is a Bluetooth forum here:
http://discussions.apple.com/category.jspa?categoryID=145
Also, go to system preferences>bluetooth. Highlight your mouse. Click on advanced. Click on the little gear at the bottom>show more info. Then click on the gear again and make your mouse a favorite.
If that does not help, try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

Cannot reboot after kernel panic on Macbook Air 11

MBA 11 had kernel panic and gave me the "you must shut down" warning. Now it won't reboot. Hangs at gray screen with circle/slash in middle.
I have the external optical drive, but I don't have the installation disk or the flash key that came with it.
What are my options?

Never mind. I fixed the issue via Safe Boot, then Restart. Seems OK now. I was a little panicky when I posted as I'd come off a bad day.

MOVED: 760GM-P34 (FX) Random Reboots after Radeon R9 290 install HELP

This topic has been moved to MSI AMD boards.
https://forum-en.msi.com/index.php?topic=253411.0

Board: MSI 760GM-P34 (FX)
Bios: Version 17.16
VGA: HIS R9 290 4gb ddr5 pci-e 3.0
PSU: Seasonic x750 Gold
AMD FX-8320 125w 8-Core Vishera
MEM: Ripjaws 16.0GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
HDD: Seagate 2TB 7200
COOLER: Cooler Master Hyper TX3
OC: No OC
OS: Windows 7 64bit Ultimate SP1

Cannot reboot after 7.1.1 upgrade...help!

Similar Messages

Maybe you are looking for