Cannot receive art work "after" Cd's installed on I TUNES

Hello!
XP user here.
1) Installed entire library of CD's on ITUNES (very time consuming).
2) Then set up my account.
3) Then permitted the automatic updates.
No album covers. Seems that the only way I can get it is through down-loading the CD's "all over again." It's the only way I can now see the covers.
I know I did this backwards (on advice of another non-I Tune user...should have known better).
Suggestions????
Thx-Red Cell.
Dell Dimension 9200 Windows XP

Thanks for the relpy.
How do I do that (I'm new as you can obviously tell)?

Similar Messages

Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.

Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.
Summary :
We are using SharePoint 2010 Ent edition and users were able to checkout Pdf files similar to local drafts folder like any other office file without any problem when they used office 2010.
i.e
Unfortunately ever since their machines upgraded with office 2013 recently , this functionality completely stopped working for PDF files. This has now become a big problem for the users when it comes to check out and replace PDF files.
All browser plugins required for this functionality (i.e SharePoint OpenDocuments Class ) are all available and active. All document libraries are configured to Checkout is required for editing files. Browser version
used at the moment is IE9 (32 bit) version with windows 7.
Can anyone please help with this issue and any help to get away with this problem is much appreciated.

Hi,
Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
Did this issue occur with Office files?
I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
thank you

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

Sound Receiver Stopped working after iOS7 on iPhone5

I have been using iPhone 5. After installtion of iOS 7 my receiver stopped working. I can use bluetooth, speaker and headphone. But i cannot use phone receiver. I started working for a day after iOS7.0.2 for a day after that it stopped working one more time. I took it to Apple store; they replaced my receiver but still does not work. According to them it's out of warranty as i purchased the phone on first day when i went on sale and it's more than year. Anyone has any clue. The replacement cost is $269.
Any idea???

My daughter has the same problem. The speakers work but not the sound receiver. Going to call apple tomorrow.

Thunderbolt is not working after Mountain Lion installed

I'm putting this discussion again because the problem didn't solve like I thought !
As you can see from the title that I have a problem already after I installed the new OS X Mountain Lion. I got my thunderbolt to Hdmi adabtor connected to an LCD TV and it was working great with snow lepord. But after the I installed Mountain Lion. it won't even recognize that there is something connected and I don't see the options in my System Prefrences> Diplays like before.
I already run software update and it's all up to date and also done a PRAM reset and nothing changed.
It only ok for a couple of min. if I restarted it and without the sound working from the LCD TV.
Please I need help here.

Well I would have hit repair. This might be stemming from a deeper issue with the installation. I've never seen that dialogue box before, and if ignoring it and booting normally worked for you then I say you did the right thing.
however
I would, go to disk utility and then select your boot drive and verify and repair disks and permissions.
if anything else WEIRD should occur, you may want to go to the recovery partition of ML (cmd+R while hearing the boot chime) and reinstalling ML. That dialogue box you mentioned is strange and should be noted. A reinstall will probably fix whatever issue comes up.

Microphone doesn't work after Windows clean install

I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
I have tried the Toshiba Software Installer but it didnt help
I have tried both drivers on toshiba's website for Realtek but it still doesnt work
driver_audio_realtek_TC40053600B.exe
driver_audio_realtek_TC40064600A.exe
Anything else I can try. Please help
Thank you.

Satellite A135-S4677
After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
1st Hardware Drivers & Hardware Utilities
1) Chipset related
2) Display
3) Sound
4) All other hardware drivers & hardware utilities
2nd Toshiba Utilities & Toshiba Software
1) Toshiba Value Added Package (TVAP)
2) Toshiba Flash Card Utility (sometimes included in the TVAP)
3) All other Toshiba utilities and Toshiba software
Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
Intel Chipset SW Installation Utility for Windows 7 (32/64)
Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
Please let us know what happens. Good luck.
Mike

Ipod won't work after trying to install Paid 2.0 update

I bought the 2.0 update for my 16 gig ipod touch. After trying to install the update through itunes half way through the update it gave me the message "The ipod could not be restored. An Unknown error occured (6)." I tried to do a restore on the ipod it it does the same thing. Can anyone help? Now after paying for an update I have an ipod that doesn't work at all.
I tried doing a restore using the old software on a different itunes library and get the same error message.
Any suggestions?
Thanks Larry

lukemichael wrote:
ok i have figured out how to fix this problem!! it is simple. make a new account on your computer. Now use the itunes on that account and just plug ur touch in and restore it. It will restore it to the software 1.1.4 . now just go back to your main account on ur computer and plug ur touch in once again and it will restore it to its original settings and sync all your songs and videos and the rest.
I followed the above instructions. Let Itunes 7.7 set itself up on the new account and downloaded the update. The first attempt didnt work but the second attempt after I rebooted the PC I logged in on the new user and booted up Itunes.
When that had finished faffing about I connected the USB cable into another USB port (above the one its just come out of if you get my drift) and it started extracting the software for Restore then it started prparing the ipod for for restore and then started uploading the software to the ipod in which it had not done it before. As I type it has just finished synching the ipod with my current Itunes library on my default windows account.
I am running the update but will have to enter my contacts details again but hey thats no big deal.
So I hope you all get yours to work.
Cheers
Hentis

Siri does not work after IOS 7 install

Siri doesent work after I OS 7 install I hear it is a hardware problem. Siri works fine but then you download IOS seven and it stops working. Apple has told a couple people they have to buy a new phone. I hope thats not true. Because I will buy a new phone but it wont be apple if thats the case.

Hello, Dan.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the article below when experiencing issues with Siri.
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Cheers,
Jason H.

Secondary monitor does not work after OS X install

My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

Try the easy thing first - NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

Touchsmart 320-1030 Touchscreen is not working after OS re-install

HDD crashed, and was replaced with new, re-installed system from factory recovery CDs, now touch screen does not work. I have re-installed the drivers to no avail. system Properties says under Pen and Touch: No Pen or Touch Input is available for this Display. It used to work before the hard drive crashed. Is there a setting in the BIOS? or something else I may have missed?
Thanks

Hello @ncmich2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Touchscreen of your desktop computer is not working after replacing the Hard Drive, and I would be happy to assist you in this matter!
To re-enable the touchscreen features on your computer, I recommend re-installing the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Cannot receive text messages after switch from iphone

After more than 2 years on an Android, my family convinced me to try an iPhone. After one week, I decided to return my iPhone and go back to Android. Now I cannot receive text messages from anyone using an iPhone. It thinks I'm still using iMessage.
I have already talked with Verizon customer service and unregistered my number from both Messages and FaceTime via my computer. Please help! This is extremely frustrating!

Appreciate the update plurrykid,
Knowing you are starting to receive them is good, but certainly we want you to receive all of them, not just random ones. I know it’s important to get them up and running as soon as possible. It will usually take Apple 24-48 hours to un-register you completely; if it has not been fully done, what you can try is resetting your Apple ID password here http://bit.ly/1kwc2va . Since you will be changing your password and the original device which still has iMessages on, will not be aware of the new password for them, it will revert to text messages. Let us know how it goes.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Lost art work after uploading to iCloud. Any solutions available?

I am using iOS 7 on on iPad, I recently had uploaded some artwork to iCloud using Sketchbook Pro. When I tried to upload a piece of art work it disappeared from my gallery in Sketchbook Pro and from iCloud. My question is, does anyone know how to find the piece of artwork in iCloud?

I have the same issue. My hardrive crashed on my PC and I lost my entire itunes library. I have all my music uploaded in the iCloud using iTunes Match and would like a way to download it all to my PC. Is there no way to do this?

Cannot receive art work "after" Cd's installed on I TUNES

Similar Messages

Maybe you are looking for