Cannot receive faxes after upgrading to 10.5.8

Since upgrading, I cannot receive faxes on either powerbook. Sending works fine.

I too am having this problem under 10.5.8
Apple would appear to not know about it because they will only provide help under a warranty, Applecare or on an incident subscription basis.
Forget the Apple help documentaion. It just suggests that you reinstall the System software. That doe not help. Been there, done that. Further documentation suggests contacting Smith Micro, the purveyors of Fax Stf. They had me look in the Applications folder to see if FaxStf was lurking there. It is not. SM say the last time that they supplied Fax software was as part of Jaguar.
You can purchase Stf from Smith Micro for $49.00 $20.00 if you have a registered earlier version. That would have the benefit of tech support and full fax controlling options. smithmicro.com

Similar Messages

  • Cannot access internet after upgrading to IOS 6.1.2 on iphone 4

    cannot access internet after upgrading to IOS 6.1.2 on iphone 4.

    ok here is the issue.
    After i upgraded the IOS to IOS 6.1.2 I'm not able to use mobile internet as i have a data sim card.
    As the settings provided by the service provider are not compatible with IOS 6.1.2 and the service provider cannot do anything about it, as it's something that has to be ressolved by apple.

  • Cannot view msgs after upgrading to IOS8

    Cannot view msgs after upgrading to IOS8..I get the msgs but cannot open them..the screen just goes blank
    I tried restarting..back up ..using a different sim..everything but nothing is working
    can anyone help urgently its affecting my business big time
    Thanks

    I am having this same issue. I live in Korea and changing the language to Korean made the messages searchable, but when I changed back to  English, the problem returned and I was unable to search all my messages via the search window in the messages app, but then, after about 5 minutes, the messages app crashed, and after that, the problem was resolved. Gotta sat that I'm so far unimpressed with ios 8; seemingly not ready for Primetime.

  • TS3276 cannot receive mail after i sent a large photo.   A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out.  i have read apple support and done everything they suggest.  Help!

    I cannot receive mail after i sent a large photo.   A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out.  i have read apple support and done everything they suggest.  Help!

    How large is 'large'?

  • Cannot receive fax from one telephone number

    I cannot receive faxes from one specific party, connects and then says it fails to receive.

    Hi,
    Please check the sender to see is it a silence number ? or using any filter ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP8600 Plus won't send or receive fax after firmware upgrade

    Hi All,
    Suddenly my HP8600, refuses to send or receive fax. I get the message "Can'r send or receive fax" immediatley after power up.  I have a strong feeling that the problem started after an automatic firmware upgrade to version OJP8600_N911a_R1435A  .  Unfortunately there does not seem to be a simple way to downgrade or is there?   HP refuses to tell.  I have checked the telphone line and the connection also tested with another fax machine.  I tried resetting several times without any success. It is just out of warranty and works perfectly in all other respects.
     Do someone have any ideas?
    Thanks in advance.
    Bondra12

    Hello @Bondra12 , welcome to the forums
    I understand you now cannot send or receive a fax, and I am here to share my suggestions with you.
    No, you cannot reverse a firmware upgrade from my knowledge. I would suggest however, troubleshooting the fax problem by trying out the steps from this guide: Cannot Send or Receive Faxes
    If the problem does happen to continue, and I wish that it doesn't, to give us a call to see if you have any out of warranty printer options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Cannot search messages after upgrading to iOS8!!!

    After upgrading my iPhone5S to iOS8 yesterday, I noticed that it cannot search Messages for information. To be exact, it only searches messages that have been sent/received after the upgrade. It seems it hasn't cached older messages and keeps ignoring them when searching for something. Any help? Is it a bug?
    iPhone 5S, iOS 8

    I am having this same issue. I live in Korea and changing the language to Korean made the messages searchable, but when I changed back to  English, the problem returned and I was unable to search all my messages via the search window in the messages app, but then, after about 5 minutes, the messages app crashed, and after that, the problem was resolved. Gotta sat that I'm so far unimpressed with ios 8; seemingly not ready for Primetime.

  • Cannot search messages after upgrading to iOS7!!!

    After upgrading my iPhone4 to iOS7 today, I noticed that it cannot search SMS Messages for information. To be exact, it only searches messages that have been sent/received after the upgrade. It seems it hasn't cached older messages and keeps ignoring them when searching for something. Any help? Is it a bug?

    Same problem here with 4S updated to IOS 7 via OTA.
    I have solved the problem by connecting the phone to Itunes, backing up, re-installing IOS7 and restoring from the backup.
    Now everything is fine and all messages are indexed.
    I hope this helps!
    F.

  • Mac OS mail (PDF) attachments cannot be read after upgrading to Maverick

    After upgrading to Maverick receiver of e-mails with PDF attachment cannot see or open the attachment. Everything works normally with attaching and sending but it seems to disappear on its way to receiver.

    Having the same problem…attachment is visible inline, but cannot be opened nor downloaded. See this thread:
    https://discussions.apple.com/message/23508746

  • Iphone 4 cannot discover wifi after upgrading to 4.3.5

    I have 2 Iphones after upgrading one of them to 4.3.5 thedevice cannot discover any wifi networks while the other iphone v.4.3.2 can??canyou please help i tried restoring and resetting network setting even changingmy router settings but nothing is Working ??

    That's because you are sharing an Apple ID, and iMessage is tied to Apple ID. There are two solutions: You can select different addresses for the two phones by going to Settings/Messages and tapping on Send & Receive. Or, the better solution is to sign out of iMessage on his phone (Settings/Messages), then create and sign in with a new Apple ID just for iMessage. This will not affect your sharing your Apple ID for apps, music and videos.

  • Cannot recive SMS after Upgrade to 4.6.1.310

    Hi,
    I hope someone can help me with my SMS issue. I cannot receive any SMS on my BB after the upgrade to v 4.6.1.310.
    If anyone send me a SMS they get the status as Delivered but I dont receive any SMS notification.
    I have no isssue with Sending SMS.
    I have tried my SIm with other handsets and I can receive SMS on other handsets.
    Please someone Help.

    Same problem
    I recently exchanged at Apple Store my iPhone 3GS, which had been desimlocked.
    I changed carrier yeserday - phone was OK.
    After upgrade to 6.1 later in the day, the phone was simlocked on the former carrier !

  • Cannot receive faxes on lexmark x5470 I don't think I did it right can you help

    Cannot get my Lexmark X5470 printer to receive faxes.   Perhaps I have not done it right with all the telephone cords it asks for.  I recently upgraded to snow leopard, just not that computer smart can anyone help   Thank you any and all with your help  When we first got this computer and printer we did not set up fax at the time  how would I do that now?  So now it is Imac 10.6.8 Mac OSX
    Thanks again
    Sandie

    Hi Sandie,
    Is your Internet via DSL? If so you need DSL filters.
    This is Windows, but the basic setup info is the same...
    http://support.lexmark.com/index?page=content&id=HO3005&locale=en&userlocale=EN_ US

  • I cannot open iPhoto after upgrading latest apple updates.  Getting a message latest iPhoto version is not available in the US

    MacBook pro, 8GB,  OSX Yosemite
    I cannot open iPhoto after latest apple upgrade.  Getting message latest iPhoto version is not available in the US.

    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Cannot open mail after upgrading to leopard

    I cannot open mail after I upgraded to leopard. I keep getting this message that "mail has unexpectadly quit. I have sent reports to apple. Does anyone have any suggestions?

    5.1.4 will solve the compatibility issue, however, it is no longer available from Apple -you would have to find a copy on Ebay or similar. The current version is FCP 6 -part of Final Cut Studio 2.
    Going back to Tiger will also solve it and will not cost anything, apart from the time spent reinstalling.
    Unless there is some feature in Mac OS X 10.5 that you really need, this would be the easiest way to get FCP running again.

  • SAP cannot start Oracle after Upgrading to 10g

    I have upgraded Oracle to 10g (10.2). After upgrading I run startsap but sapstart can start Oracle database but R3trans cannot verify that the database is started.
    the following log are in startdb.log. Please give me an idea what to do to solve this problem.
    S27adm 22> more startdb.log
    Mon Jun 2 13:00:22 GMT: 2008
    LOGFILE FOR STARTING ORACLE
    Mon Jun 2 13:00:22 GMT: 2008
    checking required environment variables
    ORACLE_HOME  is >/oracle/S27/102_64<
    ORACLE_SID   is >S27<
    Mon Jun 2 13:00:22 GMT: 2008
    check initora
    Mon Jun 2 13:00:22 GMT: 2008
    check initora
    Mon Jun 2 13:00:22 GMT: 2008
    checking V2 connect
    TNS Ping Utility for HPUX: Version 10.2.0.2.0 - Production on 02-JUN-2008 13:00:22
    Copyright (c) 1997, 2005, Oracle.  All rights reserved.
    Used parameter files:
    /oracle/S27/102_64/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = er3asu81)(PORT = 1553)) (CONNECT_DATA = (SERVER = DEDICATED) (
    SERVICE_NAME = S27.world)))
    OK (0 msec)
    tnsping: V2 connect to S27
    Mon Jun 2 13:00:22 GMT: 2008
    Connect to the database to check the database state:
    R3trans: connect check finished with return code: 12
    Database not available
    Mon Jun 2 13:00:22 GMT: 2008
    Shutdown database
    First trying to shutdown the database - May be,
    the database is in the nomount or mount state
    Mon Jun 2 13:00:22 GMT: 2008
    starting database
    SQL*Plus: Release 10.2.0.2.0 - Production on Mon Jun 2 13:00:23 2008
    Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 2533359616 bytes
    Fixed Size                  2199816 bytes
    Variable Size            2025713400 bytes
    Database Buffers          503316480 bytes
    Redo Buffers                2129920 bytes
    Database mounted.
    SP2-0158: unknown SET option "charwidth"
    no rows selected
    Not a terminal
    Not a terminal
    Database altered.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning and Data Mining options
    Mon Jun 2 13:00:46 GMT: 2008
    Connect to the database to verify, that the database is now open
    R3trans check finished with return code: 12
    ERROR: Startup of database failed
        Notify Database Administrator.
    Mon Jun 2 13:00:46 GMT: 2008
    /usr/sap/S27/SYS/exe/run/startdb: Terminating with error code 2

    Verify .dbenv* files in your <sid>adm home directory and update them as recommended in 10g upgrade documentation in the SAP Marketplace.
    If still not resolved, do R3trans -d from <sid>adm home directory and post the recent trans.log file to review further.
    Good Luck
    Nag Anthati

Maybe you are looking for