Cannot receive goods in a prior period

Hello,
We are trying to receive goods against a PO, in period 12/2010. We were able to successfully do this until Jan 31. Feb 1 onwards, we are getting error message # M7053, saying that u201CPosting only possible in periods 2011/02 and 2011/01 in company code xxxxu201D.
Below are some points I have tried/checked so far:
1.     MMPV has run for Nov, Dec and Jan.
2.     We do not use periods 13 u2013 16.
3.     In OB52, periods are open from 12/2010 to 02/2011.
This all started happening as the current period changed to Feb. Please advise.
Thanks,
Meet

Dear,
this is standard behavior of SAP, Posting is only possible for current and previous period only.

Similar Messages

I cannot receive email properly now. When I open mail, it says that is downloading about 1,700 emails. At the very end, it gives me my newest ones. But this takes a long time. I've contacted the Internet service provider and verified all the right setting

I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.

WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt

Cannot receive emails, download speed down to 0KBs and freezes. Please Help

I am having trouble with my Mac Mail. when I start up the program, all new mail starts coming in and halfway through it will stop, download time goes down to 0KBs, and I cannot receive any new emails. Happens every time, after closing, force quit, restarting, updates, I cannot fix this.
I managed to get a error message from Terminal. Hopefully someone can understand what this is...
**++Last login: Tue Mar 3 09:54:33 on console++**
**++/Applications/Mail.app/Contents/MacOS/Mail ; exit;++**
**++[Administrators-Computer-3:~] admin% /Applications/Mail.app/Contents/MacOS/Mail ; exit;++**
**++2009-08-27 10:00:18.404 Mail[406:807] * CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x7b03, name = 'com.apple.mail.ServiceProvider'++**
**++See /usr/include/servers/bootstrap_defs.h for the error codes.++**
**++2009-08-27 10:00:24.764 Mail[406:807] A sync alert handler is already registered in a different process for the client com.apple.Mail++**
**++Stack Trace: (++**
*+(+*
*+2454142192,+*
*+2478032108,+*
*+2454141952,+*
*+2454142008,+*
*+2471674088,+*
*+2471675180,+*
*+2447570664,+*
*+2453692628,+*
*+2512091928,+*
*+2512091452,+*
*+2512091004,+*
*+2416177736,+*
*+2416176128,+*
*+2416150688,+*
*+2415956636,+*
*+997376+*
*+))+*
**++2009-08-27 10:00:25.175 Mail[406:807] A sync alert handler is already registered in a different process for the client com.apple.Mail.BookmarksSyncher++**
**++Stack Trace: (++**
*+(+*
*+2454142192,+*
*+2478032108,+*
*+2454141952,+*
*+2454142008,+*
*+2471674088,+*
*+2471675180,+*
*+2471852920,+*
*+2447570664,+*
*+2453692628,+*
*+2512091928,+*
*+2512091300,+*
*+2512091004,+*
*+2416177736,+*
*+2416176128,+*
*+2416150688,+*
*+2415956636,+*
*+997376+*
*+))+*
**++2009-08-27 10:00:25.298 Mail[406:b603] Bookmarks Manager: error "The file “AvailableFeeds” could not be opened." in -[BookmarksManager countOfSubscribedFeeds]++**
**++2009-08-27 10:00:26.234 Mail[406:807] A sync alert handler is already registered in a different process for the client com.apple.Mail.Notes++**
**++Stack Trace: (++**
*+(+*
*+2454142192,+*
*+2478032108,+*
*+2454141952,+*
*+2454142008,+*
*+2471674088,+*
*+2471675180,+*
*+2471852920,+*
*+2447570664,+*
*+2453692628,+*
*+2512091928,+*
*+2512091452,+*
*+2512091004,+*
*+2416177736,+*
*+2416176128,+*
*+2416150688,+*
*+2415956636,+*
*+997376+*
*+))+*
**++2009-08-27 10:00:26.987 Mail[406:cc1f] Seen Messages: error "The file “MessageUidsAlreadyDownloaded3” could not be opened." in -[SeenMessagesManager saveChanges]++**
**++2009-08-27 10:00:27.151 Mail[406:cc1f] prepareForSave:: save for NSSQLCore 0x7c5380 is already in progress++**
**++during invocation of -[MessageRouter routeQueuedMessages]++**
**++Stack Trace: (++**
*+(+*
*+2454142192,+*
*+2478032108,+*
*+2506162548,+*
*+2506162096,+*
*+2506085800,+*
*+2506082508,+*
*+2506148340,+*
*+4635448,+*
*+4093436,+*
*+4004472,+*
*+2454165932,+*
*+2454164020,+*
*+3893744,+*
*+3897248,+*
*+2447568264,+*
*+2535760072+*
*+))+*
**++2009-08-27 10:00:28.046 Mail[406:c42b] SyncServices[ISyncSessionDriver]: Caught top level exception: I/O error for database at /Users/admin/Library/Mail/AvailableFeeds. SQLite error code:1, 'SQL logic error or missing database' Stack trace: (0x92473cf0 0x93b3c4ec 0x95607bd0 0x9560763c 0x9560b304 0x95630a44 0x95626fb0 0x95626be0 0x3698a4 0x3697a4 0x955f9a38 0x95633ee4 0x95633844 0x95633628 0x955fb5b8 0x955fb13c 0x955fa4d0 0x369520 0x3696c8 0x6fc1060 0x934e0c60 0x934cefd4 0x93557820 0x91e2ed88 0x9724a0c8)++**

You are not alone - I have exactly the same problem. It sort of 'crept up on me' - downloads were at first slow, then they never completed, then the only way to quit was to force quit. It happens on several accounts loading from different servers, so is not a single email blocking up the system. Unfortunately, I have no simple answer!
I have been all this forum, trying whatever I can find - trashing this and that file - rebuilding - fixing permissions (take a look, it is discussed in several places) - even reinstalled the system from disc (10.5.4, then updated to 10.5.8)... That has worked for some people, but not me.
I will do a clean reinstall once I get back to my office from travels
Good luck
PL

Genius bar of little help...iphone: "cannot receive or make calls..."

went to the genius bar today because my iphone is apparently dead, and at&t won't touch it in terms of service.
get there and the guy says i have to make an appointment for tomorrow. and asks me for a number where i can be reached. again explain that the number at which i can be reached "cannot receive or make calls..."
anyone know how i can get this fixed now? and not have to pay for cell service that i can't even use?

Apple handles all iPhone repairs or exchanges under warranty. You can call AppleCare at (800) 694-7466 to handle everything over the phone, or make an appointment at an Apple store if there is one nearby.
If you can't make a call with your iPhone, it isn't a good idea to call technical support from the iPhone you are having a problem with anyway, and the same with a technical support problem with any cell phone since troubleshooting steps may involve doing something with the device that prevents being able to remain on the phone.
I don't have a landline at home so when I've needed to call technical support for any cell phone I've used in the past, I make the call from work, or from the landline of a family member, friend, neighbor, or pay phone.
Are you able to access the internet via the cellular network and receive or send SMS?
If so, this may be due to a problem with your SIM card. If there is an AT&T corporate store nearby, you can tell the store about the problem and request a new SIM card to see if this resolves it. The AT&T store can activate your iPhone with the new SIM card.

HT1349 I need to turn off the "find my phone" feature on my iPhone 5. The company I worked for took back their iPhone and now I cannot receive texts on my new LG F6 phone. Can I do this w/o the serial number?

I replaced my iPhone 5 with an LG F6 phone and now I cannot receive text messages from my friends with iPhones. Can somebody please tell me where to go to turn off the "Find your phone" feature and what ever else I need to turn off to accomplish this objective? Thank you.
Isotope Joe

Find My iPhone has nothing to do with receiving or not receiving text messages.
What you should have done is turn off iMessage prior to handing over the device.
Deactivating iMessage

Profit Center Group Organization Change - Effective for Prior Periods

Hi Experts,
A client wants to perform a horizontal organization change (profit centers) and see the effects retroactively to the prior periods. To achieve this, they plan to re-execute the consolidation tasks going back two to three years once the org change is made, so that they have comparative financial statements that take into account the change. The requirement is to re-post the group level postings to the updated profit center group after the change. For example, Italy related postings would occur under the group Central Europe instead of Western Europe as before. All the group level postings previously booked to Western Europe would now need to recorded under Central Europe going back prior periods.
Does anyone have any ideas as to how to meet the requirement without re-consolidating?
One option was the restatement feature but based on the SAP help description of the monitor required, it does not take into account consolidated postings, only uploaded PL00-10 data and translation.
Another option is to copy the version but then the results is in another version rather than the original 'actual' "100" version.
Any ideas would be appreciated.
Thanks
Eyal Feiler

Eyal,
I know of no other way to accomplish this than to re-execute the consolidation for the prior periods after the hierarchy has been changed.
I have used the restatement feature and like you have found it very limited.
The copy to another version would only work if you copied the existing data to the new version before re-executing the consolidation. The the version 100 can be re-consolidated for the previous periods and the existing reports do not have to be changed for a new version.
However, with the copy, it is important to set the cons group and cons unit hierarchies to be version dependent so the changes are only good for the version that is to be re-consolidated for previous periods. This allows you to report on the data before the change where the logic will read the old, unchanged version of the hierarchy.
Dan

How to post prior period depreciation into the current period

We accidentally missed a depreciation run in a prior month and so cannot move ahead until this is posted. We do not reopen prior periods once the GL is closed. Is there a way to post the prior month's depreciation into the current month? We are on ECC so I understand depreciation no longer posts via SM35. I have seen other posts that discuss similar issues but haven't seen this exact issue. I've been told there is no way to do this, our only option is to reopen the periods. Hoping that is not the case. Thanks.

Hello,
Since the depreciation didn't run in the previous month, the depreciantion of last month and current month to be booked in current period is possible. For example period 06 was the previous month, then in current month depreciation run AFAB > select 'Unplanned posting run' in the 'Reason for posting run' only for current month for e.g. period 07. From next month onwards, select 'Planned posting run' as normal.
Kind regards,
John Chin
Edited by: chinks on Jul 20, 2011 12:43 PM

TS3276 E-mail cannot receive only send. Help

E-mail can send only , cannot receive will not accept password. Help

I have the same problem which started two days ago. Still get emails on my phone and ipad but not on my mac.
Talktalk, which I use for incoming mail, does not recognise Apple computors so I send using Google.
This has always been perfect and worked fine untill this last weekend.
When I check Accounts and select Talktalk I get a message that the password cannot be sent securely.
Also I notice that the SSL is marked OFF
Wi Fi connection is good.
May have to resort to a trip to the Genius Bar at my local Apple store.

TS1307 Cannot receive .mac e-mail on my two older Macs running Mail 2.1.3 on OSX 10.4.11 since the last weekend.

Cannot receive .mac e-mail on my two older Macs running Mail 2.1.3 on OSX 10.4.11 since the last weekend.
Still sends mac.com e-mails and all other "non mac.com" e-mails on "Mail" are working fine incoming and outgoing?
Cannot access via i-cloud on 10.4.11 as told not supported and cannot update for old I-mac as later OS not suitable for processor on imac
Works OK on Macbook air with current OSX
HELP.....Please??

IT WORKS!
Though it doesn't tell you this in the password error message, the problem IS the new Apple ID password requirements.
FIRST go to https://iforgot.apple.com/ and CHANGE YOUR PASSWORD. In my case, my old password didn't use at least one capital (upper case) letter, and that was preventing the whole thing from working. When all the little password criteria lights are green, you're good. Save as you exit your browser if it asks you to.
Then open Mail, preferences, accounts, and click on the plus sign to create a new account called iCloud Mail.
These are the settings I used:
Account settings:
Description: iCloud Mail
email address: [email protected]
Full Name: John Doe
incoming Mail Server: imap.mail.me.com
User Name: John Doe
password: (enter new Apple ID password)
Outgoing Mail Server (SMTP): smtp.mail.me.com
Server settings:
Server port: 587
check box Use Secure Sockets Layer (SSL) yes, check it
Authentication: Password
User Name: [email protected]
Password: enter new Apple ID password
Click on Advanced tab:
Check "Enable this account"
Check "Include when automatically checking for mail
ignore Compact mailboxes automatically
Check Automatically synchronize changed mailboxes
IMAP path prefix: leave blank
Port: 993
Check Use SSL
Authentication: Password
Be sure to save the settings when asked after you close the accounts window.
O.K., this little part may be a complete coincidence, but in mail, nothing happened when I hit "get mail". Then, when I clicked on the little "broken" icon on iCloud mail on the left, it sprang to life and imported all my mail from iCloud. However, as I say, that may have been unnecessary and a complete coincidence of timing as I had hit "get mail" previously.
If that doesn't work, try shaking dried chicken bones tied with cat gut over your machine.
Best of luck!

I have an Officejet 4500 g510n, and cannot receive any faxes ...HELP!!!

Since I changed my carrier for phone, internet etc, I have been unable to receive any faxes. The phone rings, it starts to communicate, then it fails. I have gone through the troubleshooting scenarios and changed my phone to 0 rings so the voicemail does not come on, but still cannot receive any faxes.
Can anyone tell me how I can fix this problem? I had no issues with my previous carrier.

Hi Trishiann,
I understand your printer is not receiving faxes. Take a look at the following document, Cannot Send or Receive Faxes. I understand you went through some troubleshooting scenarios, so I apologize if some, or all, of this information is redundant. If there are suggestions in the document you have not tried, however, it would be a good place to start. Best of luck.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Import to prior periods using DTW

Is there any way to import transactions to a prior period? I have opened all prior periods and I continue to receive a posting date deviates from permissable range error message. The dates do fall within the posting date. I am able to change the date within SBO to prior posting period manually, any reason I can not bring them in through the DTW?

1. The posting period is defined correctly, also please make sure that the posting
date, due date and document date used in the document should be according to the current posting
period.
2. Also please check under administration --> System Initialisation --> Document Setting -->
Please make sure that the option : Block documents with earlier Posting Date is not checked.
On point #1, you say "should be according to the current posting period.", but in this case I am looking to import these to a period that is unlocked, for example is 10/10/2007. All of my dates fall within the ranges listed below. My current period that I am attempting to post to for example is set up as follows:
Period Code Period Name Period Status Posting Date From-To Due Date From-To
2007 2007 Unlocked 01/01/07 12/31/07 01/01/07 12/31/07
I confirmed point #2 as well.

Cannot Receive iCloud email on Iphone 4 -

I cannot receive i-Cloud email on my Iphone. I can receive other email accounts and I can send from i-Cloud but not receive. I have not changed any settings. Anybody else experiencing this? Any suggestions?

This is not good, Apple making users like yourself start from scratch for a problem which lies with their servers screwing up for the past few days!
Wouldn't it be nice if Apple acknowledged the problem, at least on their iCloud system status page: http://www.apple.com/support/icloud/systemstatus/
It's called being proactive, Apple!

Cannot receive text messages after switch from iphone

After more than 2 years on an Android, my family convinced me to try an iPhone. After one week, I decided to return my iPhone and go back to Android. Now I cannot receive text messages from anyone using an iPhone. It thinks I'm still using iMessage.
I have already talked with Verizon customer service and unregistered my number from both Messages and FaceTime via my computer. Please help! This is extremely frustrating!

Appreciate the update plurrykid,
Knowing you are starting to receive them is good, but certainly we want you to receive all of them, not just random ones. I know it’s important to get them up and running as soon as possible. It will usually take Apple 24-48 hours to un-register you completely; if it has not been fully done, what you can try is resetting your Apple ID password here http://bit.ly/1kwc2va . Since you will be changing your password and the original device which still has iMessages on, will not be aware of the new password for them, it will revert to text messages. Let us know how it goes.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Cannot receive mail can send email receiving mail on another mini pad

I Cannot receive mail on my iPad. Password correct in setting. Receiving mail on another iPad with same password yahoo account have had no trouble till yesterday.

A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all!

Cannot receive iMessages on iPhone

I have an iPhone with iOS 8.1.2 and a MacBook Pro (OSX Yosemite). My problem is the following: I cannot receive iMessages on my iPhone. However, if I send iMessages from my iPhone or Mac, they are received normally and I do receive iMessages on my Mac. The behaviour for text messages (SMS) is normal. Moreover, when somebody (including myself) sends me iMessages, I can see the three dots that appear when somebody is typing long after they stop typing and for a longer period of time.
In order to fix my issues I tried the following:
deactivate and reactivate iMessages
deactivate text forwarding to my MacBook
restarted iPhone
reset network settings on my iPhone
reset all settings on my iPhone
delete conversations and users
removed and re-added Send & Receive addresses
Erase all content and settings
Out of these options only the last worked but only as long as I didn't restore the backup. As soon as I restored the last backup, the problem came back. I cannot figure out whether this is an issue with my iMessage setting on the iPhone, iCloud settings or something else.
Does anyone know how I can fix this problem and have my content & settings back?

My problem was suddenly fixed with no action on my behalf.

Cannot receive goods in a prior period

Similar Messages

Maybe you are looking for