Cannot receive messages on new phone

I recently went from an iPhone to a samsung galaxy and I'm having trouble with receiving messages off iPhone users, I've disabled Imessage, deleted my phone number from the apple system to no avail, I've also done the same on on my ipad along with removing my number on FaceTime, I've changed my Apple ID password and still I cannot receive messages from iPhone users, I've also had all my iPhone using friends delete my number and add it again as mobile not iPhone, PLEASE help!!!!!!

call apple support http://support.apple.com/kb/ts5185

Similar Messages

  • Cannot receive messages on new IPhone.

    I recently switched to a newer IPhone but since then i don't receive messages from other IPhone users. They only appear on my IPad. I have tried deactivating IMessage on both devices. My old IPhone is still around (yet no longer connected to my subscription) - could this be causing the problem?

    You can go to Setting -> Messages -> Send & Receive, there you can check whether all your addresses are checked. If everything is checked, you can check the same on your iPad. If none of these things work I would try restarting and/or a soft reset by holding your sleep button for 10 seconds.

  • I cannot receive messages from iphones since I got a new android device. did the change apple I'd password and whatnot...it still isn't working. what do I do?

    I cannot receive messages from iphones since I got a new android device. did the change apple I'd password and whatnot...it still isn't working. what do I do?

    Lets take first issue first: Apple does not charge a customer to 'keep' iPad access. That does not happen at apple. If you were billed and charged that amount of money from someone you were speaking to over the phone, you were not talking with Apple support. If you need to speak with apple support you are free to call them at 800MYAPPLE and they will talk to you for no more money than 19.00/ support event.
    Please read this article to asssit with imessage and factime troubleshooting.
    http://support.apple.com/kb/TS4268
    I'm sorry you have this happen to you - that being charged fraudulently for a non rendered service.
    Good luck to you Friend.

  • I cannot receive texts on my phone.  They are coming into my iPad.  What happened?  I can send texts, but they are now green and not the blue color.  ??

    I cannot receive texts on my phone.  They are coming into my iPad.  What happened?  I can send texts, but they are now green and not the blue color.  ??

    Turn iMessage on for your devices.
    Settings > Messages > iMessage.

  • Switched from 9900 to q10 and a particular i cannot receive messages from a particular bbm pin

    switched from 9900 to q10  and a particular i cannot receive messages from a particular bbm pin
    the messages are not being delivered to me from a particular pin

    Can you send messages to that particular pin?
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Can ipod touch 4th generation send and receive messages from a phone number?

    I have an iphone number connected to imessage but my iphone broke.  On my mac messages app it allows me to be reached at (my phone number).  Is it possible on the ipod touch 4th generation to send and receive messages from my phone number as opposed to an email address?

    Only if you have an iPhone using with iOS 6 or greater using the same APple ID for Settings>Messages>Send and Recevice.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage

  • Cannot receive message that more than 1 text

    hi, recently i found that my palm centro cannot receive message that more than 1 text (long message), but ok for short message, please advice any suggestion to settle this problem, thanks a lot.
    Post relates to: Centro (Unlocked GSM)

    hi, recently i found that my palm centro cannot receive message that more than 1 text (long message), but ok for short message,
    I am unclear on what your problem is.  Please explain what you mean by "more than 1 text (long message)".
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • I updated my apple id and all my messages were deleted, and I cannot receive messages sent to my new apple id

    I just updated my apple id to match my primary email and when I logged into messages on my iPad with the new id, all my messages were deleted and I cannot receive new massages sent to my new id.  My iPhone which is still logged into my old apple id is receiving messages from both ids.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • HT4528 The new iOS6 allows you to send/receive messages from other phones linked to your iTunes account which is great for checking on my kids but I dont want them to be able to add my phone to their messages.  Is there a way to block from being added to

    I updated to the iOS6, and it allows you to view and send messages with any phone on iOS6 and linked to your iTunes account.  You can unselect phones so they dont go out through the phone, but is there a way to block other phones from adding yours?  Example, I don't ind being able to see what my son is sending/receiving on his phone but I don't really want him to be abe to add my phone and see all my messages...

    Simple process. If an iPhone go to the Apple Store and not Verizon
    the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
    good luck

  • I have an iPhone 4S and my friend has two ipods with two Apple ID's.  Why can't he receive messages on "Message" on one and he uses a free text app on the other which receives messages from my phone just fine.

    My friend has two ipods.  Two Apple ID's and on one ipod he has a free text app on it and only Message on the other.  He cannot receive a message from my iphone 4S on the one with Message, but receives it fine on the one with the free text app.
    He can also receive a message from my iPad on the one with Message.
    My question is how can he recieve a text from my iPhone to the ipod which has a different Apple ID than the other but does not have a free text app?
    Also on the ipod he has the free text app he has not upgraded to ios7 and won't.

    Are the use the correct email address for the contact? Those are listed in Settings>Messages>Send and Receive. When Messaging somene the iOS devices used the email address (or phone number if applicable) listed in the Contact app for that person.
    Thus, it appears the you Contact apps only has that one email address listed for the person you are trying to Message.
    If he can send you a Messages can you reply to it? If so save the sender to your Contact app.

  • Cannot receive messages from one person only...

    My friend and I both have iphone 4s (with iOS 6.1.3). One day i stopped receiving messages from her. I can still receive an iMessage from her (but since neither one of us has data that is dependent on internet availability) but regular text messages won't come through. She can receive regular messages from me. I can receive regular messages from everyone else (including other iphone users). I don't know what happened. I have tried multiple suggestions i found online (including deleting and readding her contact, she did same, restarted phones, typed number manually, typing number twice etc.) but none of them work. If anyone could help it would be much appreciated!!

    I'm having a similar problem. I can receive texts from this one person but he cannot receive mine. I can also not call him but he can call me. He uses A T&T but does not have this problem when texting other verizon users. I have an Iphone 4S and he has an Iphone 5. This has been happening for 3 days. I have tried resetting the networks, restarting my phone,  and checking blocked contacts. Nothing is helping with the issue.

  • HT4623 Since my update on my 5s I cannot receive messages from other iPhones. They all have to be sent by text. Why?

    Since my 7.1 update I do not receive messages unless they are sent as text.

    iOS: Troubleshooting Messages
    Symptoms
    Learn how to resolve issues with the Messages app on your iPhone, iPad, or iPod touch. You'll learn what you need to send messages using SMS, MMS, and iMessage as well as how to resolve issues with each method.
    Resolution
    Before you start troubleshooting, learn the difference between SMS, MMS, and iMessage. The first step to resolving an issue with iMessage is to update your iOS software and your carrier settings to the latest versions. If iMessage still has an issue, follow the steps below for your issue.
    If you can't activate iMessage with your phone number or Apple ID
    See how to troubleshoot iMessage activation. If you're using a China Telecom or au (KDDI) iPhone, you can activate iMessage only on your home network. While traveling internationally, you can't activate iMessage.
    If you can't send and receive iMessages
    You will need these to send and receive iMessages:
    An iPhone, iPad, or iPod touch
    iOS 5.0 or later
    A cellular data connection or a Wi-Fi connection
    A phone number or Apple ID registered with iMessage in Settings > Messages
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    If you aren't receiving iMessages across all iOS devices
    Go to Settings > Messages > Send & Receive on each iOS device and make sure that you signed in with your Apple ID. You must use the same Apple ID on each device.
    Go to Settings > Messages > Send & Receive > You Can Be Reached By iMessage At and make sure that you selected each phone number and email address you want to use with iMessage.
    If you linked a phone number to your Apple ID with iMessage and the phone number hasn't appeared, followthese steps.
    Sign out of your Apple ID in Settings > Messages > Send & Receive and Settings > FaceTime on all devices.
    If you're linking a phone number to an Apple ID, sign in to iMessage on your iPhone first. Then sign in to the rest of your device one by one with iMessage and FaceTime.
    If your iMessages didn't transmit as SMS when iMessage was unavailable for use
    Go to Settings > Messages > Send as SMS and turn on Send as SMS.
    Select your phone number when Sending iMessages in Settings > Messages > Send & Receive > Start New Conversations From.
    Make sure that you can send SMS with Settings > iMessage turned off.
    Source: http://support.apple.com/kb/ts2755

  • Receiving messages on broken phone?

    My phone broke and was dead for about a week before I got my new one. I have the same number and I thought once I activated my new phone the messages would pop up like when you turn it back on after it has been dead. but it didnt and I know I got at least a hundered messages from a group message I'm a part of and my friends were yelling at me for not texting them back. Please help if you know how to get these messages.

    Hi,
    The iPhone and the Mac need to have the same Apple ID.
    This then links the iPhone number to the Apple ID.
    This in turn  means that iMessages sent to the iPhone are then also sent to any other device.
    It may pay to restart the set up.
    Make sure the Mac has the Apple ID in iMessages.
    On the iPhone remove the Apple ID and then place in Airplane mode to break with the servers.
    After a few minutes go back to the Settings > Messages.
    Check the app is On for iMessages and the iPhone number is ticked (it is always greyed out).
    Add the Apple ID to the settings.
    (Enable Send as SMS and the MMS settings if your want to make sure the iPhone will send something if you are not on WiFi or suitable 3G coverage)
    Now restart the App on the Mac.
    It should now get pop ups saying what the iPhone is using.
    You should accept these.
    This will add the iPhone Number to the "Receive At" list and tick it as active and place it in the "Start Conversations From" drop down at the bottom.
    I tend to have my Mac set to use the Apple ID as Send From and the iPhone as the Number.
    However it really is up to you (if you are sending to iPhone contacts then it pays to use the iPhone number if they don't know your email)
    8:56 pm      Thursday; March 20, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Servlet cannot receive message from applet after sent message to applet

    In my Applet-Servlet communication, my servlet can not receive message from the applet after the servlet sent message to the applet. It will throw java.io.EOFException: Expecting code
    Can someone tell me what is wrong?
    ==============
    This is relevant code on applet side:
    String inMsg = "";
    try {
    _owner.textArea.append("run start...please wait......\n");
    String location = "http://111.111.11.111:8080/mdo/servlet/BLServlet";
    URL servletURL = new URL(location);
    URLConnection servletConnection = servletURL.openConnection();
         _owner.textArea.append("URL = "+location+"\n");
    servletConnection.setDoOutput(true);
    servletConnection.setDoInput(true);
    servletConnection.setUseCaches(false);
    servletConnection.setDefaultUseCaches(false);
    servletConnection.setRequestProperty("Content-Type", "application/octet-stream");
    _owner.textArea.append("servlet connection: \n  "+servletConnection.toString()+"\n");
    outputToServlet = new ObjectOutputStream(servletConnection.getOutputStream());
    _owner.textArea.append("output to servelt:  "+outputToServlet.toString()+"\n");
    _owner.textArea.append("Send msg: Register\n");
    outputToServlet.writeObject("Register");
    _owner.textArea.append("Sent. \n");
    outputToServlet.flush();
    _owner.textArea.append("Flush. \n");
    try {
    Thread.sleep(3000);
    } catch (InterruptedException exc) {
    _owner.textArea.append("Cannot Sleep.\n");
    return;
    inputFromServlet = new ObjectInputStream(servletConnection.getInputStream());
    _owner.textArea.append("input from servlet:   "+inputFromServlet.toString()+"\n");
    Object inMessage = new Object();
    inMessage = (Object) inputFromServlet.readObject();
    inMsg = inMessage.toString();
    _owner.textArea.append("Receive: "+inMsg+"\n");
    _owner.textArea.append("output-to-servelt:  "+outputToServlet.toString()+"\n");
    _owner.textArea.append("input-from-servlet: "+inputFromServlet.toString()+"\n");
    _owner.textArea.append("Send msg: Hello\n");
    outputToServlet.writeObject("Hello");
    _owner.textArea.append("Sent. \n");
    outputToServlet.flush();
    _owner.textArea.append("Flush. \n");
    try {
    Thread.sleep(3000);
    } catch (InterruptedException exc) {
    _owner.textArea.append("Cannot Sleep.\n");
    return;
    _owner.textArea.append("output-to-servelt:  "+outputToServlet.toString()+"\n");
    _owner.textArea.append("input-from-servlet: "+inputFromServlet.toString()+"\n");
    inMessage = new Object();
    inMessage = (Object) inputFromServlet.readObject();
    inMsg = inMessage.toString();
    _owner.textArea.append("Receive: "+inMsg+"\n");
    _owner.textArea.append("End of run\n");
    } catch (Exception e) {
    _owner.textArea.append("Exception:  "+e.toString()+"\n");
    Code on Servlet side:
    public void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException {
    String inMsg;
    try {
    textArea.append("start of main\n");
    inputFromApplet = new ObjectInputStream(request.getInputStream());
    inMsg = (String) inputFromApplet.readObject();
    textArea.append(" - BLServlet - from Applet: "+inMsg+"\n");
    if (inMsg.equals("Register")) {
    outMsg = "Register Accept";
    } else {
    outMsg = "MISTAKE2";
    textArea.append("output message: "+outMsg+"\n");
    outputToApplet = new ObjectOutputStream(response.getOutputStream());
    textArea.append("object output stream: "+outputToApplet.toString()+"\n");
    outputToApplet.writeObject(outMsg);
    outputToApplet.flush();
    try {
    Thread.sleep(3000);
    } catch (InterruptedException exc) {
    return;
    inMsg = (String) inputFromApplet.readObject();//Throw java.io.EOFException: Expecting code
    textArea.append(" - BLServlet - from Applet: "+inMsg+"\n");
    inputFromApplet.close();
    if (inMsg.equals("Hello")) {
    outMsg = "Hello! How are you!";
    else {
    outMsg = "MISTAKE3";
    textArea.append("output message: "+outMsg+"\n");
    outputToApplet.writeObject(outMsg);
    outputToApplet.flush();
    } catch (Exception exc) {
    textArea.append("Exception: "+exc.toString()+"\n");
    return;
    } // end of try/catch
    } // end of doPost method

    I have the same problem. I'm trying to send an ImageIcon through an ObjectOutputStream from an Applet to a Servlet. Here is my code:
    URL url = new URL(getCodeBase(),"/License/SnapshotServlet");
    URLConnection con = url.openConnection();
    con.setDoOutput(true);
    con.setUseCaches(false);
    con.setRequestProperty("Content-Type", "application/x-java-serialized-object");
    OutputStream os = con.getOutputStream();
    BufferedOutputStream bos = new BufferedOutputStream(os);
    ObjectOutputStream oos = new ObjectOutputStream(bos);
    oos.writeObject(icon);
    oos.flush();
    oos.close();
    Here is my error:
    [5/6/02 17:41:31:312 CDT] 7f8b8205 SystemOut     U service() called
    java.io.EOFException
    at java.io.DataInputStream.readFully(DataInputStream.java:168)
    at java.io.ObjectInputStream.readFully(ObjectInputStream.java:2076)
    at java.io.ObjectInputStream.inputArray(ObjectInputStream.java:1085)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:380)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:242)
    at javax.swing.ImageIcon.readObject(ImageIcon.java:373)
    at java.lang.reflect.Method.invoke(Native Method)
    at java.io.ObjectInputStream.invokeObjectReader(ObjectInputStream.java:2219)
    at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1416)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:392)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:242)
    at dps.license.webcam.SnapshotServlet.doPost(SnapshotServlet.java:39)
    at dps.license.webcam.SnapshotServlet.service(SnapshotServlet.java:75)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.ibm.servlet.engine.webapp.StrictServletInstance.doService(ServletManager.java:827)
    at com.ibm.servlet.engine.webapp.StrictLifecycleServlet._service(StrictLifecycleServlet.java:167)
    at com.ibm.servlet.engine.webapp.IdleServletState.service(StrictLifecycleServlet.java:297)
    at com.ibm.servlet.engine.webapp.StrictLifecycleServlet.service(StrictLifecycleServlet.java:110)
    at com.ibm.servlet.engine.webapp.ServletInstance.service(ServletManager.java:472)
    at com.ibm.servlet.engine.webapp.ValidServletReferenceState.dispatch(ServletManager.java:1012)
    at com.ibm.servlet.engine.webapp.ServletInstanceReference.dispatch(ServletManager.java:913)
    at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:523)
    at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:282)
    at com.ibm.servlet.engine.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:112)
    at com.ibm.servlet.engine.srt.WebAppInvoker.doForward(WebAppInvoker.java:91)
    at com.ibm.servlet.engine.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:184)
    at com.ibm.servlet.engine.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:67)
    at com.ibm.servlet.engine.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:106)
    at com.ibm.servlet.engine.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:125)
    at com.ibm.servlet.engine.oselistener.OSEListenerDispatcher.service(OSEListener.java:315)
    at com.ibm.servlet.engine.http11.HttpConnection.handleRequest(HttpConnection.java:60)[5/6/02 17:41:31:859 CDT] 7f8b8205 SystemOut     U saving image...
    [5/6/02 17:41:31:859 CDT] 7f8b8205 SystemOut     U ERROR: Image is null!
    at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:323)
    at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:252)
    at com.ibm.ws.util.CachedThread.run(ThreadPool.java:122)
    Does anyone have any idea what is going on here?

  • Cannot receive message in Outlook Express

    I recently (for the first time) accessed my ISP's e-mail service. Since then I have been unable to receive messages in Outlook Express although I can send them. When I check for new messages I do get a connection but no new messages. Some of my messages are diverting to my ISP provider's e.mail service. I have checked all my account settings etc for OE and they look fine. It was all working perfectly before. Any ideas, help would be appreciated.

    Hi to all
    Well, the Outlook express is a part of the Windows OS and if you want to reinstall it you need an original Microsoft Windows CD. The delivered Toshiba recovery CD proffers only the whole OS image. In this case its not possible to install only the Outlook Express. You have to recover the whole OS.
    I know its not the optimal solution. You can try to use the system restore tool. Then you can roll back the OS to the early point.
    But if it doesnt help, the recovery procedure is the last chance.

Maybe you are looking for

  • How to test for différent Select into a single PL/SQL block ?

    Hi, I am relatively new to PL/SQL and I am trying to do multiple selects int a single PL/SQL block. I am confronted to the fact that if a single select returns no data, I have to go to the WHEN DATA_NOT_FOUND exception. Or, I would like to test for d

  • Ink system failed

    i have a photosmart 3210 and it has quit printing.  i get an error message saying "ink system has failed. unable to copy, receive faxes, or print.  Error Oxc18a0001

  • Show organizer files in the project bin.

    In the project bin the default option is to "show open files".  But there is an additional oprion in the drop down menu "Show files from Orgainzer".  I am just learning to use elements 8 and am reading a book that describes this and see the drop down

  • Is it possible to batch print .pdf AND .doc files together?

    I need to let users to batch print a set of files that includes both .PDFs and .DOCs. Since <cfprint> allows .PDF files only, what would you suggest? Thanks!

  • Compliance Calibrator Upgrade path CC 5.1 to AC 5.3

    Hello, In the PAM for access control 5.3, Compliace Calibrator 5.1 to Access Control 5.3 is not listed in the "Upgrade to SAP GRC ACCESS CONTROL 5.3 from" section. We are on CC 5.1 NW04. Will the rule conversion utility that is shipped with Access Co