Cannot recieve calls!!!!!  Plz help

I just activated my iPhone and am having problems recieving calls. I call out but when someone calls me of goes straight to voicemail. How do I fix this?

Once activated,it can take up to 24 hrs for the iPhone to be able to receive calls.
However it rarely takes that long.
Jim

Similar Messages

  • HI.I HAVE UPGRADED MY IPHONE5 TO 8.1.3. I M HAVING PROBLEMS FOR MAKING OR RECEIVING CALLS.PLZ HELP ME WAT TO DO.I HAVE DONE THE BASIC RESETTINGS,RESTORING N ALL THAT.CAN I DOWNGRADE TO THE LOWER VERSION?

    HI.I HAVE UPGRADED MY IPHONE5 TO 8.1.3. I M HAVING PROBLEMS FOR MAKING OR RECEIVING CALLS.PLZ HELP ME WAT TO DO.I HAVE DONE THE BASIC RESETTINGS,RESTORING N ALL THAT.CAN I DOWNGRADE TO THE LOWER VERSION?

    Thanks for reply,
    It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
    Iwish I have not upgraded.
    I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
    Thanks for your valued suggessions but it didn’tmade any difference to my situation.
    So now I have an ipod in the price of an iPhone4. Crap.
    Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users.

  • I formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    i formatted my ext hard drive and changed it to mac os x extended(journaled). then i put in all my data back. after a while, i insert the hard drive but my macbook cannot read it. plz help

    SanandaDutta 
    tried on a different mac. The same problem exists.
    If that is the case, its extremely unlikely you have a bad USB cable on the seagate, rather as I mentioned earlier a bad SATA bridge card.
    If the Seagate 1TB USB external wont open on either Mac and youve verified same (try a diff. USB cable if you have one however this is nearly never the case),....then to get the data off that HD (unless it is dead which is also extremely unlikely),......then you would need to extract the HD from its case and insert same into either a HD dock or USB HD enclosure.
    8 out of 10  seemingly dead inopperable 1-3+ year old external HD are perfectly fine, rather the cheap 50 cent SATA bridge card fries and dies (alas)
    reply back if you need help in extracting same. 

  • Fully unlocked but ca't dial and recieve calls - apple help!

    Hello, Please help me to resolve these problems.
    Can't dial - as soon as i enter into phone keypad and click any number the phone dial menu jumps back to Main Iphone menu. So I can't dial! it happens as soon as I click any number. The only way to dial is to add someone into contact and dial through Contacts. That's so far the only way to call someone.
    Can't recieve calls - If someone calls me then iphone does not respond at all.
    I can only see on the screen (small ring with trasparent sticks loading) I know that the iphone should ring, but instead it goes into freezing mode meanwhile someone calls. Also, buttons don't work at this time.
    One more this, I have went to menu to play some ringtones and I could not hear any of them. The only way I was be able to hear them all is when I have connected the headphones.
    Bought fully unlocked iphone in Germany.
    SIM card works fine and iphone is activated.
    Iphone 1.1.2.
    I have tried to restore the iphone through itunes but it doesn't solve the problem. Tried several times!
    Please help me!

    Thats your problem. Currently, the country code for Estonia is not hardcoded in a specific file - like I mentioned in my previous post. Because of this the phone application as well as the SMS application will not function properly.
    There is currently no fix for this that is santioned by Apple. You can call Apple Care and report the problem to be sure they are aware of it but many before you have already done so.
    Right now you have two choices - You can:
    1) Wait for Apple to release a fix and have your phone with limited functionality. There is no way of knowing if/when this might happen.
    2) Search Google for an unauthorized solution. Doing so will void your licence agreement and prevent you from easily updating your phone in the future as well as void any service or tech support from Apple for future issues.
    The choice is up to you.

  • Cannot recieve calls

    I have a new iphone butam  unable to recieve calls, i can make them though , anyone have any solutions, thanks in advance.

    Reset-network-settings

  • My I phone says, cannot send or recieve calls! Help!!!!!!!

    I have had zero problems with my phone since i've had from September. But yesterday I bought an Itrip car adapter for my ipod/iphone so I could listen to music in my car. After hooking my phone up to it, it said "Iphone is not compatible with this" after unplugging my phone it stopped working. My phone will not charge nor will it make calls anymore. After hooking it up to i-tunes it said "repair needed, cannot send or receive calls, apple.com/support". I've tried resetting it everything, but nothing works. Now it's completely dead. Does anyone know if I can take it to my local at&t store and thay cand send it back for me? I don't live near an apple store.

    call Apple they will give you a free loaner and overnight you a overnight box to send in your phone for repairs. AppleCare is awesome

  • HT1414 I accidently turned on my Voice control and now my apps are not working, I cannot even use my phone app to make a call. plz help

    Any advice on how to turn off Voice Control?
    My phone is NOT working because of this.
    PLEASE help
    Thank you

    I have same problem. I can get to Settings > General, but can get any furthrt than Auto Lock! Screen won't scroll or anything. HELP!!!

  • Cannot recieve calls due to unknown symbol

    HI there all, I have a slight problemo. This symbol randomly appeared and now i cannnot recieve or make calls. I have looked for the symbol in the manuals and its unheard of so far. haha.   Its a yellow fone with a symbol 1 and a arrow pointing at the 1, in a almost lightning pattern, It is on my main screne as well as whenim dialing a number it is in the line 1 bar above the dialpad. PLease anybody that can help?

    Hello !
    Is that symbol from any of the following:

  • Mp3 format, still cannot transfer! Plz help!

    Hi,
    I am trying to transfer a file to my iPod. It says it is an mp3 format sound, the file can be played on iTunes, but when i try to transfer it, there is an error saying that "the song cannot be played on this iPod. What do i do?
    Plz someone help.. Thanks

    I just had this problem as well and spent quite a bit of time reviewing all of the suggestions/ideas/comments, and since I am not that tech-savy I remembered this "suggestion" from the UK show The "IT  Crowd" which was "Have you tried turning it off and on again??" (both devices)
    http://bit.ly/18qL7OA  (apologies for short ad on the youtube clip)
    It worked!! 

  • Recent Itunes upgrade, now cannot access store, PLZ Help

    My Itunes was working perfectly until I did the recent upgrade. Now I cannot connect to the store. The connections are the same, only change was the upgrade.
    I ran the restore feature in windows to roll back to earlier time, but still having same problem.
    I would gladly uninstall Itunes and Quicktime and reinstall fresh, if I knew _how to save the 300 album cover artwork and playlists and purchased items_ I had saved in itunes to link to my apple t.v.
    Any help would be greatly appreciated

    Scroll down through this : http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-backing -up-your-itunes-library/
    and it will tell you what folder in iTunes contains what you want to preserve.
    Copy those folders to a safe location and then, after the new install, move them back to the correct locations.

  • I bought an iPhone 4 from eBay a few weeks back, been working perfectly til recently it comes up with 'No Service' 'iPhone cannot recieve calls...' iTunes has made me restore the device and now I cannot set it up again (constantly searching in the corner)

    HELP?!

    Sounds like the phone was hacked or jailbroken before you purchased it. Discussing these kind of unauthorized alterations to a phone is prohibited here by the Terms of Use for this forum. In that case you'll have to get help elsewhere.

  • Agent cannot recieve call

    Hi,
    I have an agent configured in UCCX on a remote site. All of the CRS config should be correct and the agent can log on to the agent desktop. When a call is routed to the agent the status goes into reserved, then straight back to Not Ready (or Ready). the phone does not even ring which i suspect is the issue.
    I think the problem is either;
    a. Partition or CSS issue - this is the first agent on a remote site
    b. Codec issue - i doubt it as the phone would ring first if there were a codec issue.
    I have attached the MIVR but i think this is the issue;
    The Resource to which the transfer failed is 3055
    Cheers
    Jon

    Its ok i solved it myself, as suspected the CSS was the issue . the CTI ports did not have access to the remote partition.

  • Cannot run eclipse,plz help

    hello, guys. i cannot run eclipse on my federa core 3. it says that the program cannot display

    I am not sure about jserv but Apache Tomcat is all you need to serve html/jsp/servlets. Here is the link to the Tomcat site...
    http://jakarta.apache.org/
    Zac

  • LIMIT OCI SAME TIME CALLS ;;;PLZ HELP ME

    RDBMS Version: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
    Operating System and Version: Red Hat Enterprise Linux Server release 5.1
    Problem : My database server 's always loded and I 'm affraid that will crashed one day
    Hi all,
    Doing an investigation about what applications could load my oracle server, I accuse the OCI sessions calls started since other web servers.
    Sometimes when I see some load on my server I kill theses OCI sessions and my server load 's stopped! So i decide to fix a rule in order to limit my gather OCI active sessions in one giving time. I know that Oracle purpose PROFILES that this solution limits the number of sessions per user and this not grantee what i want since the same user can open other sessions from other diffrent connections types (different then OCI).
    Someone can provide me a solution for this such as all the sessions 're opened always from one and only one user?
    thanks
    Regards,
    Message was edited by:
    HAGGAR

    thank you Justin :
    - So HISTOMC_HOURLY_METAGROUP is a table with just 1 row then?
    --> YES, One single Row
    - And yet it's taking 3 seconds to select that single row from the table?
    --> Yes it's normal, because the select 's execution from one another distant database.
    - How do you know that subsequent processing isn't slow? normally, I get the result after 3 or 4 seconds.
    thanks,
    Wissem

  • HT6154 I tried to update Iphone 4 to IOS7. It is now frozen on itunes with picture of itunes and connection cord. can't make or receive calls. Help

    I have tried to update y iPhone 4 with ios7 several times. The first time it did not update and erased all of my contacts. This time the screen went blank and is now stuck on a screen that has a picture of iTunes icon and a usb plug in. I cannot get it to move to another screen I cannot make or recieve calls. Help please.

    You will have to restore your device using iTunes on a computer.

Maybe you are looking for