Cannot record from the webcam

Hi! I just bought a WebCam NX Pro and successfully installed it, at least that is what I thought. But, when I tried to record a video an error message occurs as follows:
Ctcpcam -
CTPCCAM caused an invalid page fault inmodule KERNEL32.DLL at 05f:bff9d709.Registers:EAX=c00300ec CS=05f EIP=bff9d709 EFLGS=000022EBX=077bfe28 SS=067 ESP=076bff2c EBP=076c0c8ECX=00000000 DS=067 ESI=00000000 FS=88fEDX=bff76859 ES=067 EDI=bff7998 GS=0000Bytes at CS:EIP:53 8b 5 dc 9c fc bf 56 89 4d e4 57 89 4d dc 89 Stack dump:
Hope you could help on this.
Thank you.
Grace

Grace,
Your best option at this point would be to attempt to uninstall and reinstall the camera completely. First make sure to shut down all background programs and your antivirus, then go to Add/Remove programs and uninstall all of the camera software and drivers. After this is done, make sure that everything is still disabled and reinstall the camera.
Jeremy

Similar Messages

Selecting microphone when capturing video from the webcam

Using Final Cut Pro X
I want to capture video from my webcam into Final Cut. I have a USB microphone (Yeti) with which I want to record the audio. I cannot find an option to select my input source for audio when capturing this footage. Final Cut seems to default to my microphone on my webcam, which causes echoing and noise. I can select the USB mic when doing a voiceover, but when I capture video I cannot find an option to select my input. I've made my USB mic my default device in Sys Prefs, but that doesn't work. Any other ideas?
Options
1. Figure out how to change the default input for webcam capture in Final Cut
OR
2. Use another program. I've also tried to do the same in both QuickTime and iMovie, and they both capture audio only from the webcam as well.
Everything I've found online talks about voiceover. I don't want that. I want to capture video with it.
Suggestions are appreciated. Thank you.

acyclone wrote:
Thanks. Don't know why I didn't see it. That arrow is pretty small.
I do still have an issue that I cannot figure out. I'm using the same mic for webcam recording (now in QT thanks to Luis) and in Final Cut for voiceovers. Though I'm still on the same Mic the sound is not the same. It's close, but the sound on the voiceover sounds cleaner and clearer. I'm sitting in the same spot speaking the same way, but the sound quality difference is noticable. Not sure why.
It seems that the difference is in how each software deals with it.
It may be that QT is sampling audio differently from FCP X somehow, or using a different audio codec or whatever.
Just guessing, I really have no concrete knowledge.
Oh, wait: there are a few things that I can notice, after trying a small example: the QT audio is AAC at 44.1 KHz,
the FCP X is AIFF at 48KHz. Compression and sample rate are different.

How to record from the video in or S-video Ports on Qosmio G40?

Can anyone tell me how to record from the video in or S-video ports, because i've tried the Ulead DVD factory program and the only capture device it could see was the webcam, and it did capture from it
After that i've downloaded the update file that was provided by the support website
The devices that the program could see are the TV tuner and the webcam (which it couldn't access anymore for some reason)
After that i've downloaded a newer update which simply is the same as the last update and seems that someone in the support website directed the link of the new update which they don't have to the file of the previous update which doesn't really do anything.

Hi
There are 2 s-video ports; s-video out port is not designed to capture the signals from any external source. The name of this port says everything; its an OUT port!
The s-video-in port must be placed at the right side of the notebook. Dont mix the both ports. But note; this port receives only the video signals. To hear the sounds, use a video cable to connect the sound terminals of the audio device and your computer.
Red: sound right channel
White: sound left channel
The Ulead DVD Movie factory can be used to capture this signal.

Delete blank records from the cube

Hello;
We just upgraded from 3.5 to 7.0. When we started running our queries for the Inventory cube, we were getting an error message of "Error: The validity interval has the initial value as lower limit".
When I checked the cube, I found records that were blank, such as no dates, plants, etc.. I then tried to see if I can delete those records, but I cannot find a way to do this. Can someone tell me how to delete the blank records or any records from the cube directly? When I run the queries from the ODS, I do not get any errors at this time.
Any information, suggestions or HELP is greatly appreciated.
Thanks,
Maximina Barry

Hello Maximina,
You could try writing in some code that would delete the records which have some fields as blank in the start routine of the transformation that connects the ODS to the cube . So that the next time you load data from the ODS to the cube .. they would stay deleted .
Hope it helps.
Just to add ...
refer -> Need Sample Code to delete records from Cube using SE38 Editor
Thanks,
~Vj
Message was edited by:
Vijay Gopinath

Can not delete record from the master block ,frm-40202 field must be entere

hi ,
i have built a form which contain master and details blocks
the problem is
when i try to delete a record from the master block it gives me new serial for the transaction and when i try to save it, it says
>frm-40202 field must be entered
where this field is required and i cant save it
although in another form when i delete from the master it gives me the previous record and it works properly
if any one has any ideas pls help me
thank u
------- the master block has a trigger when-create-recoder
Declare>v_dummy number;
Begin
Select nvl(max(ERNT_NO),0) + 1 >Into v_dummy
From LM_RENT_EXPNMST >Where cmp_no = :LM_RENT_EXPNMST.cmp_no
And brn_no = :LM_RENT_EXPNMST.brn_no>and fiscal_yr = :LM_RENT_EXPNMST.fiscal_yr;
>:LM_RENT_EXPNMST.ERNT_NO := v_dummy;
END;
IF :PARAMETER.RNT_NO IS NOT NULL THEN
     :LM_RENT_EXPNMST.RNT_NO:=:PARAMETER.RNT_NO;
          :LM_RENT_EXPNMST.RNT_YR:=:PARAMETER.RNT_YR;
     :LM_RENT_EXPNMST.CUST_DESC:=:PARAMETER.RNT_ADESC;
END IF;Edited by: ayadsufyan on May 8, 2013 2:03 PM

If this is a FORMS question you should mark this one ANSWERED and repost your question in the FORMS forum
Forms

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Delete record from the form and from the database

hi,
i want delete record from the form and the database ,but the record is only delete from the from !!!
this is my code :
if //condition then
delete_record;
commit;
end if ;
Any solutions ??
thnx

You have unique key field(s) on the table you are trying to insert which actually restricts you from inserting the same value again.
When you are deleting the record and issue commit there is a record to be inserted in the table which is a duplicate that's why you are getting this unique error.
As oracle is not able to insert your commit fails and stops your deletion of record from table

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

How to delete the child record from the database

how to delete a parent and child record from the database can we do it in the servlet and my database is oracle

I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

How to find out top 10 records from the R/3 using Java code (WD Program)

Hi Experts,
I have used Java Web Dynpro program to fetch records from the backend. Following code helps me and fetches record. As per the customer reqirement, we have to fetch only top 10 records (Actual Cost) from the backend. So I have to modify the Java code. How I can do so? Please help.
 wdContext.nodeGraphData().invalidate();
 IPublicCostcnt.IGraphDataElement categoryElement;
 for (int i = 0; i < wdContext.nodeItab_Final1().size(); i++) {
 categoryElement = wdContext.createGraphDataElement();
 categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
 categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
 categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
 wdContext.nodeGraphData().addElement(categoryElement);
Regards,
Gary

Dear SDN Users,
This is how I resolved the issue.
1) Requested ABAPer to provide me sorted data. The data has been sorted in descending order of actual_cost.
2) After that I used following code. This resolved the issue.
 if (wdContext.nodeItab_Final1().size()>10){
 IPublicCostcnt.IGraphDataElement categoryElement;
 for (int i = 0; i < 10; i++) {
 categoryElement = wdContext.createGraphDataElement();
 categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
 categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
 categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
 wdContext.nodeGraphData().addElement(categoryElement);
 if (wdContext.nodeItab_Final1().size()<=10){
 if (wdContext.nodeItab_Final1().size()>0){
 IPublicCostcnt.IGraphDataElement categoryElement;
 for (int i = 0; i < wdContext.nodeItab_Final1().size(); i++) {
 categoryElement = wdContext.createGraphDataElement();
 categoryElement.setCostElement(""+ wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getDescription());
 categoryElement.setActualCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getActual_Cost().toString());
 categoryElement.setPlannedCost(wdContext.nodeItab_Final1().getItab_Final1ElementAt(i).getPlan_Cost().toString());
 wdContext.nodeGraphData().addElement(categoryElement);
Regards,
Gary

I want to diaplay my records from the databasewith 10 records per page. i l

i want to diaplay my records from the databasewith 10 records per page. i learned that it can be done through pagination . Please can anyone there help me and give me the code of how to page my records in my jsp pages
I have small code ,but its not working....
below is the code....
public ResultSet codeResult(int i){
if(dataSource!= null){
 try {
 con=dataSource.getConnection();
 stmt=con.createStatement (ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_READ_ONLY);
 int maxRows=stmt.getMaxRows();
 System.out.println("the maxRows is:"+maxRows);
 System.out.println("the I value is:"+i);
 if((i < 0) || (i > maxRows)){
 i=0;
 stmt.setFetchSize(i);
 long t = System.currentTimeMillis();
 rs=stmt.executeQuery("select asc_code,countrycode,asc_name,asc_address1,asc_address2,asc_city,asc_country,asc_region,asc_contact_person,asc_contact_no,asc_email_id,asc_fax_no,nso_incharge,nso_email,ar_ap_code from asc_master order by asc_code asc");
but,its giving all records...
any one help me on this........
Thank you,
D.Nagireddy.
 } catch (SQLException e) {
 e.printStackTrace();
 return rs;
 }

hey, here my code for paging. hope it helps...
 public void DueRecordInfo(int page,int MAX_PER_PAGE)
 con = new DBConnection().getConnection();
 try
 Statement stmt = con.createStatement();
 String sqlcount = "SELECT COUNT(*) FROM INFO WHERE TO_DATE(DATEUPDATED,'Month DD, YYYY') < ADD_MONTHS(SYSDATE,-6) AND OBSOLETE LIKE 'No'";
 ResultSet rscount = stmt.executeQuery(sqlcount);
 rscount.next();
 total_row_count = rscount.getInt(1);
 lowerbound = (page * MAX_PER_PAGE - (MAX_PER_PAGE))+1;
 upperbound = lowerbound - 1 + MAX_PER_PAGE;
 String sql = "Select * from "+
 "(SELECT row_number() over(ORDER BY TO_DATE(DATEUPDATED,'Month DD, YYYY') DESC) AS RN,ID,SPECNO,REVISEDNO,DATEREVISED,TITLE,ORIGINATOR,DCBNUMBER,DCBLOCATION,OBSOLETE,DATEOBSOLETE,WORDFILE,PDFFILE,DATEUPDATED FROM INFO WHERE TO_DATE(DATEUPDATED,'Month DD, YYYY') < ADD_MONTHS(SYSDATE,-6) AND OBSOLETE LIKE 'No') " +
 "WHERE RN BETWEEN "+ lowerbound + " AND " +upperbound;
 ResultSet rs = stmt.executeQuery(sql);
 while (rs.next())
 id.add(num, rs.getString("ID"));
 specno.add(num, rs.getString("SPECNO"));
 revisedno.add(num, rs.getString("REVISEDNO"));
 daterevised.add(num, rs.getString("DATEREVISED"));
 title.add(num, rs.getString("TITLE"));
 originator.add(num, rs.getString("ORIGINATOR"));
 dcbnumber.add(num, rs.getString("DCBNUMBER"));
 dcblocation.add(num, rs.getString("DCBLOCATION"));
 obsolete.add(num, rs.getString("OBSOLETE"));
 dateobsolete.add(num, rs.getString("DATEOBSOLETE"));
 wordfile.add(num, rs.getString("WORDFILE"));
 pdffile.add(num, rs.getString("PDFFILE"));
 dateupdated.add(num, rs.getString("DATEUPDATED"));
 num++;
 con.close();
 rscount.close();
 rs.close();
 stmt.close();
 }

How to fetch records from the database into a combo box?

Hi:
I´m really new with ABLBPM and I´m trying to fetch records from the database to display them into a combo box as valid values for a presentation but I´m using a dynamic method with this code:
for each row in SELECT campo1, campo2 from TABLE
do
solicitudes[] = [row.campo1, row.campo2]
end
return solicitudes
And the debugger says that SQL instructions can be used only in fuctions and procedures that are executed on the server.
Do you know another way to do it?
P.D. Sorry for my terrible english
Greetings

Hi Steve,
Thank you, your idea is perfect, but when I try to run the screenflow where the combo should be filled I get this error:
fuego.lang.ComponentExecutionException: No se ha podido ejecutar correctamente la tarea.
Motivo: 'java.lang.NullPointerException'.
 at fuego.web.execution.InteractiveExecution.setExecutionError(InteractiveExecution.java:307)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:166)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.webdebugger.servlet.DebuggerServlet.redirect(DebuggerServlet.java:136)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:85)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
 at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:463)
 at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:398)
 at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:301)
 at fuego.web.execution.servlet.ServletExternalContext.forwardInternal(ServletExternalContext.java:197)
 at fuego.web.execution.servlet.ServletExternalContext.processAction(ServletExternalContext.java:110)
 at fuego.webdebugger.servlet.DebuggerExecution.dispatchComponentExecution(DebuggerExecution.java:64)
 at fuego.web.execution.InteractiveExecution.invokePrepare(InteractiveExecution.java:351)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:192)
 at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
 at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
 at fuego.webdebugger.servlet.DebuggerServlet.doDebug(DebuggerServlet.java:148)
 at fuego.webdebugger.servlet.DebuggerServlet.doPost(DebuggerServlet.java:82)
 at fuego.webdebugger.servlet.DebuggerServlet.doGet(DebuggerServlet.java:66)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
Any ideas??
Thanks and greetings

Cannot read from the source file or disk

I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter

How to rerieve records from the table starting with character 'D'

Hi Folks,
How to get the records from the table starting with character 'D'.
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
last record in the table starting with character 'D'
How can i do that??
Pl explain.
Thanks,
Matt

Hi,
Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'.
Select MAX (fld1)
From tab1
into table itab
where fld 2 = l_fld2
and fld1 like 'D%'.

Cannot record from the webcam

Similar Messages

Maybe you are looking for