Cannot record in creative wave studio / Audigy 2

I have a windows xp x64 machine with a Audigy 2 ZS. I've been able to do?recording through line-in using the creative wave studio and the older drivers for audigy 2 ZS but after I updated to the latest driver I can't get a signal from line-in anymore. I can still hear the audio but it simply won't record it. I'm very sure the setting I used in both wave studio options and the audigy surround mixer didn't change (recording from analog mix / what I hear ). Even the windows built-in?sound recorder couldn't record anything. I see other people posting similar problem but there doesn't seem to be a fix to that. I would like to know?if that really is a driver issue. I want to find the older drivers and stick to that until creative decide to look into that. If anyone knows how to fix this or the location of the old drivers archi've please let me know.
Thx in advanced.

Try this:?Go to "recording devices."?Select the device you are using. Click "properties" of the device you are using. Click "advanced" tab. If your set up is like mine, you will see a window with different recording modes, and a mono recording mode is selected by default. Select a two-channel mode and your problem should be solved.

Similar Messages

Creative Wave Studio - VST plug-in failed to l

I have a number of VST's that I've deleted from my machine. Wave Studio continues to search for these... any idea how to get the program to stop looking for these DirectX plug-ins...

You can adjust the zoom factor by 'painting' (drag w/ mouse fr. left to right or vice versa) some area in that lowest horizontal window which is showing the whole audio data rendered.
If you open the Help and search for Zoom - it's told there that you're able to set the ratio manually (IIRC, it didn't work in vers. 5.0).
jutapaMessage Edited by jutapa on -30-2006:02 PM

Cannot record audio from wave on Satellite A100-PSAA9

Why I can not record realtime Audio Conference with the included RealTec Driver on my Toschiba A100?
Record Options given just, "Microphone-Line In-CD" but Wave is Missing, why?
I have another Notebook from Asus with RealTec Driver and there is it possible, on my Toshiba not, why?

Dear all,
I've read so many posts where people want to record music they hear on their Satellite Notebooks (either wave, or sounds from the internet) and it seems that cornelius solved the "realtec driver" problem - that doesn't meen that it's really a problem of realtec - (where there are only three mixer categories) quite well. But I tried a little - because I don't want to spend 30$ for a new driver and found a cheaper solution (finally I hope, it works at least on my Satellite A100-PSAA9).
What you need is:
first, a program that may record your sounds to mp3 or wave or whatever, I use No23Recorder - but there are lots of other programs working very well. Second you need to buy (mine cost 1) a jack plug (in german: Klinkenstecker) with one male and two female slots. Third, a stereo cable with one jack plug at each end of it (2)
Than you can start recording by putting the jack plug into the headphone slot of your Notebook; than putting the stereo cable into one of the female slots of the jack plug and the other one into the microphone slot of your Notebook. To listen to the things you want to record, put a headset into the free slot of the jack plug - and start recording ;-) !
So if you have enough money and you don't like a bit of cable salad, than I suggest you choose cornelius's way. If you are a poor student like me, perhaps you should try mine?
Cheers, Kat

Creative Wave Studio 4.21

Any Archi'ved Updates Available?

You can adjust the zoom factor by 'painting' (drag w/ mouse fr. left to right or vice versa) some area in that lowest horizontal window which is showing the whole audio data rendered.
If you open the Help and search for Zoom - it's told there that you're able to set the ratio manually (IIRC, it didn't work in vers. 5.0).
jutapaMessage Edited by jutapa on -30-2006:02 PM

Wave Studio says "device doesn't support this format"

?Wave Studio says "device doesn't support this format"'I have a X-Fi Extreme Music card I'm using in Windows 7 (x64). I haven't had any issues with the card or the software until I installed a codec pack: Shark Windows 7 Codec pack. It worked OK, but when I try to play a WAV file in Creative Wave Studio (7), I get an error message: Sorry, your audio device doesn't support this format". Weird, since Wave Studio's "nati've" format is WAVs!!
So I uninstalled Shark, uninstalled Wave Studio, and uninstalled (from Device Manager) my sound card. Rebooted, then reinstalled the driver for the sound card, rebooted and reinstalled Wave Studio. I still get the error message and can't play WAVs in Wave Studio. The version is 7.2, and the driver is 6.0..375 (5/5/200). Anyone have any ideas?
Thanks,
Laner

CThe point is moot now, I've gotten a new computer and installed the card in that machine. Everything works great now. I would imagine there was a registry issue that didn't get cleaned, or something similar. Still, it would have been nice to resolve the problem, as someone else might experience the same issue and could find a way to help get it taken care of.
Cheers,
Laner

Cannot record using microphone - SB Audigy 2 ZS [E9

Hello,
I have a microphone hooked up to the microphone plug in my soundcard. Although I can hear audio through the mic, when using windows recorder, I cannot record anything!
Also, when I plug the mic into the line-in, I can't hear anything through my speakers.
I can record?when I select "What U Hear," but nothing else. I've updated the drivers, but that didn't help.
Any input is appreciated!

I also wanted to add that I have selected the microphone option from the recording mixer and I have it set at a reasonable input level. I also have it unmuted from the playback mixer and have that level set at a reasonable level.

Wave Studio will not save fi

I have the 4.02 version of Wave Studio. I just recently bought a new compact computer with the AMD 64 and a 200 gig hard dri've. I brought my older Sound Blaster equiptment and software to my new computer and wanted to begin recording some of my 800 LPs. But, when I go to save these recordings (the files are over 200 meg), the software says that there is insufficient space on the hard dri've. I can save a file if I restart the computer, but I can't process the file. Any suggestions as to how I can save these things?

I had an extensi've email conversation with Creative and they decided that the earlier versions of Wave Studio weren't compatible with Windows XP. They also said that the sound blaster card that I had (and had not plugged into my new computer-yet) was not compatible with the newest Windows. They recommended a new sound blaster card (of course?). Well, I found a reduced price of the "value" card on line (open box), and everything works fine. The newer Wave Studio is not that much different than the 4.02, maybe doesn't do a couple things that I liked, but it is ok, and it saves!!

No signal received in Wave studio from turntable connected to SB External Line

I have a SB external (USB) with a turntable connected to line in. While the output (including wave studio) works fine into my preamp/amp and speakers, and while I get the turntable signal signal via the external's headphone jack, it does not appear/record in wave studio on my pc running xp. any suggestions?

complyguy wrote:
I have a SB external (USB) with a turntable connected to line in. While the output (including wave studio) works fine into my preamp/amp and speakers, and while I get the turntable signal signal via the external's headphone jack, it does not appear/record in wave studio on my pc running xp. any suggestions?
Actually I wasn't too sure what you wanted but have you try setting the mixer in the record windows to 'What U hear'.

Creative Sound Blaster Audigy 2 ZS With WinTV Expr

Hi,
I am using a Creative Sound Blaster Audigy 2 ZS sound card, and I recently purchased a Hauppauge WinTV Express card, I have installed the card with no problems, but it says I have to connect a wire from the Line Out port on the WinTV card into the line In port on my sound card. I cannot find a line in port onm the back of my sound card so I am getting so sound from WinTV. Can anyone please tell me how to set it up correctly?
Thanks for your help,
MJJOS.

The Line In jack is the second jack from the Digital Out jack. If you have problem locating those jack, you can checkup the user guide too.
Jason

Creative Sound Blaster Audigy Issues

$C? When playing music on my computer the sound skip's, stutters and pauses. I have these symptoms when playing aCD as well as MP3 files . I tried different players but all have the same result. I thought it was my Anti Virus, butwhen disabled it symptoms still occur. Onboard sound works perfectly. Sound card has worked fine the past threeyears until I re-installed windows recently. I have updated all drivers including Chipset and Sound card. Thinkingit may be an IRQ issue but I do not know where to begin. Is it just a bad sound card please help!
OS: Windows XP Professional
Processor: Processor 3.20 gigahertz Intel Celeron
RAM: 2048 MB
Hard Disk TB of which 5GB is used
Sound Card: Creative Sound Blaster Audigy-Model Number SB0570
Mother Borad: MICRO-STAR INTERNATIONAL CO? PM8M-V Socket 478 Motherboard

Oh my sweet Jesus Creative, what are you doing?!
This is just funny - I can't play MP3's in 5. mode! LOL!? You 'aving a bath!
On top of that you've rendered DDL useless because my spdif output doesn't appear in the drop down box.
Interestingly though I can MP3 in 5. fine through VLC player.
Have you added some kind of hardware MP3 decoding or something?
You know if you're trying to keep us with you, or encourage us to upgrade, you're going about it a very odd way.
Win 7 RC700, Audigy 2 OEM, http://forums.creative.com/i/smilies/6x6_smiley-wink.gif" title="Smiley Wink" alt="[/img]? I think you owe us now, tbh. Even just a little something like properly working CMSS 3D for headphones would be nice (which I believe is an X-Fi feature), or the ability to record 5. in WaveStudio. However I get the feeling that it would only cause more problems!? lol. http://forums.creative.com/i/smilies/6x6_smiley-wink.gif" title="Smiley Wink" alt="[/img]
Message Edited by Meocene on 07-7-2009 03:3 [email protected]

After Win XP repair creative drivers for Audigy 2 not loading correctly

? ?I have read every FAQ I can find on this including http://support.creative.com/kb/ShowArticle.aspx?sid=287. Which we have tried.
?It's my friends system...so some I am getting by phone...
Friend had something happen to his XP Pro...would not boot(just black screen with cursor and hourglass). He brought it home from repair shop and noticed he was missing his Creative volume control (Which he used to be able to right click and pick a bunch of utilities for calibrating 5. etc.)
We tried uninstalling Creative software and reinstalling...upon reboot, several error messages would pop up (CTRegsvr.reg error, Program could not load because Plxcore.plx cannot be found) would pop up 5 or six times.
The sound works and he appears to be getting 5. surround...he just cannot use any Creative tools or diagnostics.

Ok ill mention the version of the b... drivers as they are called in the download section[url="http://support.creative.com/downloads/welcome.aspx#"> [/url]
>>SBAX_PCDRV_LB_2_8_000.exe dated 7 july 2008? XP driver for Audigy series
>>SBXF_PCDRV_LB_2_8_0004.exe dated 30 july 2008 XP driver for X-fi series
The fact that you dont sprcify the WHQL certification status fools people. I wouldnt have installed this drivers if there would have been stated that they are in fact non WHQL certified ,this meaning some kind of betas.
Is it so hard to finish this new drivers and realease them finished ?

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

Cannot sign into creative cloud; cannot use creative cloud to access XI, want to use XI on more than one computer

Cannot sign into creative cloud from 2nd computer, if try to use activation code error message is "oops, already in use"; cannot use creative cloud to access XI, want to use XI on more than one computer

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
http://forums.adobe.com/community/download_install_setup

Cannot record in creative wave studio / Audigy 2

Similar Messages

Maybe you are looking for