Cannot redirect output of FNDLOAD

Hi All,
We are using AIX 6.1 ML7 to host Oracle Apps. We are using FNDLOAD to migrate setups.
We have big script running a number of FNDLOAD commands to load setups in a target instance. Problem is, we are not able to capture the output of these commands in a file. The echo commands in the script can be redirected using >>. but the log file names and errors printed by FNDLOAD are not getting redirected.
What could be the issue?

We are using AIX 6.1 ML7 to host Oracle Apps. We are using FNDLOAD to migrate setups.
We have big script running a number of FNDLOAD commands to load setups in a target instance. Problem is, we are not able to capture the output of these commands in a file. The echo commands in the script can be redirected using >>. but the log file names and errors printed by FNDLOAD are not getting redirected.
What could be the issue?What do you mean by the output of FNDLOAD? When running FNDLOAD command it only generates a log file and no output file is generated.
Thanks,
Hussein

Similar Messages

"Extraction Failed: Cannot Open Output File" error message when installing new drivers

Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.

Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got an error message, Cannot Open Output File. Can you please help me?

I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.

The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?

REP-52251: Cannot get output of job ID

Hi,
I am trying to call a report from oracle form and i am getting this error
REP-52251: Cannot get output of job ID 220 you requested on Mon Oct 16 11:19:12 EDT 2006.
REP-56033: Job 220 does not exist
please help, any Ideas.
Best regards,

Have you tried to create an URL with all the parameters you're trying to run your report with?
Try to run the report that way first - just to make sure your report can actually be run with the parameters you're using.
If that works then try to use WEB.show_document from your form, passing the same URL you just built, if that works then you are only having problems with your RUN_REPORT_OBJECT (I am not sure if you're using rp2rro library for running your reports).
Try that -- another thing that might be happening is that your output is being generated but due to the parameters (I think there is some form of timeout in the reports server, when the files in your cache are deleted, not sure if this is the problem).
Try the run the report with an URL first - that should shed some light.
If you're still having problems, post it here, so we can review it.

How to redirect output of an OS command to a stream???

how can i redirect the output of an OS command (such as 'ls' in linux or 'dir' in windows) to a io stream???
....for example, assume i'm having a textbox and a button...when i click the button , i need the output of 'ls' to be in the textbox....i think execution of the command could be accomplished by Runtime's exec() ...but how to redirect outputs???

You should find what you are looking for here:
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html

Firefox setup 9.0.1 exe won't extract (cannot open output file)

I downloaded firefox 9.0.1 and it won't extract and install on a win7 computer. It says cannot open output file. I had previous versions of firefox for 10 years. I tried disabling AV and firewall also. Please help. Nate

Thank you! My solution was slightly different, but in the end, seeing what was going on in the Help menu in the browser did the trick. Turned out I had been stuck for who knows how long "downloading" a version 3! Also had a toolbar to disable but not the Ask.

REP-52251: Cannot get output of job ID 69 you requested ....

OS: Oracle As 10.1.2.0.2 (rel 2 for Linux 86)
I have moved my forms and reports from windows XP (DS 9.04) to the Linux box.
I have compiled and run FORMS and most of the REPORTS succesfully.
I have compiled one report succesufully.
But when I run this report from the FORM, I got message as below:
Error
REP-52251: Cannot get output of job ID 69 you requested on Thu Sep 29 15:37:03 PDT 2005.<P>REP-56093: Cached output for job 69 is no longer valid
I have checked
http://abc:7778/reports/rwservlet/showjobs?
Status is as follows:
Error
Finished successfully but output is voided
Regards,
DN

Just in case someone else too finds this thread with google. We had too REP-56093: Cached output for job 5429 is no longer valid. After checking reports cache dir we did see that the problematic reports have cache key with (broken)umlauds. So we disabled :DESNAME parameter and that got rid the umlauds in file names and that resolved the cache error. So if you get this error, you might check the cache directory if the problematic reports have some weird cache files/filenames.

Cannot select output tray on a stapler stacker using universal print drivers

With universal print derivers 5.2, we cannot select output tray for print job on a stapler stacker. All jobs are set to automatic output and only uses the lower tray, not other trays.

Hi drlake,
I understand that you are having issues with printing specialty paper/labels after updating your computer. It would be best if you posted your question on the HP Laser jet Commercial Site <here>.
This would be the best place to find your answer.
Thank you
I worked on behalf of HP

"Unable to save markup: Cannot create output file" message with ISDK

Hi,
We have an integration of AutoVue with OpenText Livelink, and we're seeing that if users open a document, and then work on adding mark-ups for a long time (3 hours) without saving the mark-up when the user saves the markup they get an error message "Unable to save markup: Cannot create output file". If they then press the save button they get the out-of-the-box AutoVue 'Save Markup File As' dialog.
The ISDK DMS integration servlet and VueServlet servlet are both running under Tomcat with 740 minute session timeout set for the servlet.
When we look at the logs we're not seeing any attempts to save the mark-up, which is confusing.
It looks as though the link between the AutoVue applet and the DMS has been lost.
Is it possible to specify session time-outs in the AutoVue applet?
Is there a way of checking keep-alives are being sent (if they are ever sent)?
Help appreciated!
Thanks
Paul

AutoVue default timeout is 30 minutes and is being controlled by the option jvueserver.users.timeout (value set in seconds, default is 1800).
Adding to the jvueserver.properties the following line:
jvueserver.users.timeout=50400
would set AutoVue session timeout to 14 hours (longer than Tomcat session).
If the issue still persists, the AutoVue session timeout is probably not the cause...
Edited by: user739124 on Dec 4, 2012 12:02 PM

Cannot Create Output File Error

I have a working (and deployed) JSP/ADF application which was written with JDev 10.1.2 that I need to make a change to. Since it was deployed, I've gotten a new computer, and installed JDev 10.1.2 on it. Now, when I open the project on the new computer and try to build it, I get an error
"error writing class oracle.jbo.http.HttpSessionCookieImpl: java.io.IOException: cannot create output file"
The source file is <jdevhome>\bc4j\src\bc4jhtmlsrc.zip!\oracle\jbo\http\HttpSessionCookieImpl.java.
I'm guessing that somewhere in the project there's an xml file that has an out-of-date reference to a file location that doesn't exist on this computer. Can anyone point me in the right direction? I'm a bit concerned that JDev projects are dependent upon the original computer? Please say it isn't so!

Thanks,
Ive set this, although the temporary files that Reports usese are going there, the temp PDF isnt!!

HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".
On extract with 7-zip, I get the message:
0 can not open output file "<folders>/Autorun.inf"
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

When I try to download firefox I get this error "cannot open output file". I had firefox once but uninstalled it now I cant' reinstall. Why?

I had firefox but uninstalled it because of problems with add on Recipefox. Now when I try to reinstall it I get and error message "cannot open output file". I really liked firefox, How do I get it back?

When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you.

Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?

Try to disable your anti-virus software temporarily to see if that makes it work.
You may need to delete the temp folder (%TEMP%) to remove the old files.

REP-52251 Cannot get output of job ID -2

When Trying to Run a Report Getting This Error and only one person is getting this error as there are around 1000 + customers for whom the application is
working fine and can generate the Report.
REP-52251: Cannot get output of job ID -2 you requested on Wed Nov 29 11:49:41 EST 2006.<P>REP-56033: Job -2 does not exist
Does somebody ever faced this kind of problem. if so pls share the idea of how to deal with this issue.
Thanks
Anil.

Hi,
I am not sure about the error message!!. The possible case is the user might have change his oracle password... like with spaces or %20 (eg. emq K96 is kind of password In web automatically this will be turned into emq%k96,
. As per the report server the password is wrong while the user submit the job.This error won't occur while user connecting to the Oracle forms. But in the report server thru URL user trying to submitting the details.!!!).
One of my user have this kind problem!!!>
He is able to connect the forms but while he submit the job either he got the page cannot found error/ Report submission error.
This case is applicable only if you are using Oracle web forms/ reports.
This may be helpfull to you!!!
Cheers,
Nats

ProtocolException: Cannot write output after reading input

If I use the following code
this.conn is a database connection while urlConn is a HTTPUrlConnection
if (String.valueOf(urlConn.getResponseCode()).trim().startsWith("2"))
               {     this.conn.commit(); }
               else
                    System.out.println("FAILED BECAUSE " + urlConn.getResponseMessage());
                    throw new MppException(urlConn.getResponseMessage());
               byteStream.writeTo(urlConn.getOutputStream());I get the following exception
ProtocolException: Cannot write output after reading input
if However I change the order and instead use
byteStream.writeTo(urlConn.getOutputStream());
if (String.valueOf(urlConn.getResponseCode()).trim().startsWith("2"))
               {     this.conn.commit(); }
               else
                    System.out.println("FAILED BECAUSE " + urlConn.getResponseMessage());
                    throw new MppException(urlConn.getResponseMessage());
               It works fine but in that case there might be a deadloack on the server side since both the client and server in that case try to modify tables on the same db.
any work arounds???????

HTTP is a request / Responce based protocole where all the data to be send to the server must be included in the request and then the server send all the data as the responce.
By the time you read the responce the request is already send and the server have finished processing it. So it is not posible to send more data to the same request.

Cannot redirect output of FNDLOAD

Similar Messages

Maybe you are looking for