Cannot register servers to the CMS

Hi all,
We are running CE10 (Express) on a SBS2000 machine (very old I know!) . Everything was working fine until we installed a new SBS2003 domain controller on the network.
When I rejoined the 2000 machine to the domain, most CE services stopped running.  I now have the problem that the Crystal Input/Output File Repository, Crystal Job, and Crystal Program Job servers still will not start.
In the Crystal Config Manager I can't get all the servers to Enable.  Only the Crystal Cache and Web Component Servers are currently enabled.
When I attempt to enable the others, the following error message appears,
"A server running on a machine different from the CMS machine may not register to the CMS when using the Express version or a per processor license.  The product must be upgraded"
This doesn't make much sense as all the servers (including the CMS) are still on the same old 2000 machine.  I have changed nothing but the local administrator password, which was changed in line with the new domain admin password.  I wasn't involved in the original CE configuration, but as far as I can see there was no dependency on the old domain controller.
Hope someone can help, as I've tried lots of things and completely run out of ideas.
Regards,
Luke

Thanks Tim, that was very helpful.  I recreated the services and this has now allowed me to start all of them and also enable all of them. So I'm nearly there.
Only trouble now is that running a report through CE now gives the message:
The database logon for this report is either incomplete or incorrect
This looks similar to the old looping database logon problems that I've seen before.  Will do some more searching and see what I can find.
Thanks again.
Cheers
Luke

Similar Messages

  • Cannot register servers in 11.1.2

    We are implementing upgrade to 11.1.2 and cannot register servers. Has anyone else resloved this?

    Hi
    Could you provide more details?
    Regards
    Alexander

  • Cannot register asset to the zone

    I continue to get an error code: -21 could not determine device type OS.
    I get this when I goto a command prompt and type zac register https://192.168.1.251
    I type in the right username and password, but it's not working and gives this error back.
    How else can I get this asset registered?
    ZENworks Adaptive Agent Version: 10.3.1.34138

    Originally Posted by spond
    Motc7,
    What I am saying is: If it's Win7 SP1 or W2K8 SP1 that you can't
    register, then you need a patch which you can find at
    NOVELL: Downloads - ZCM 10.3.1 Combined patch for Zone performance degrades (see TID 7006967), Allow Windows 7 SP1 device to register (see TID 7007952), ZCC bundle status takes a long time to display (see TID 7006325)
    if it's /not/ one of thise scenarios, then you have a different
    problem, and we'd need to look into that, but I didn't want to waste
    time if we already had a fix...
    Shaun Pond
    o.k. thanks for responding. Now just trying to get the login info for the Sybase db utility and I'll let you know the rest. I do need to apply that patch.

  • Cannot Register for "Ask The Experts How to Improve Your PC's Performance"

    I'm trying to register for this event, but everytime I click the Signing Up link it takes me to "HP Passport New User Registration". I enter my information, then it says I am already a user, try signing in. I am signed in, obviously since I'm posting this. Can anyone help as I would like to register for this event.
    Thanks!
    Susan
    HP Pavilion a6300f PC
    Windows Vista - Home Premium

    Hi Susan,
    You don't have to do anything to sign up for the event. Since you already are a member of the Forum, you wil be able to ask questions. Just be sure to sign into the Forum before you click on the link that will appear right before the chat event is going to start.
    Let me know if you have any more questions.
    Look forward to seeing you on June 1st.
    Siobhan 
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

  • Customer SC missing in the CMS...

    We created a Product and a SC into the SLD, and we are trying to use it to define a CMS track .
    Despite the customer SC is available if we logon on the SLD server and search it, we are unable to find it when we are logged on to the CMS server.
    So we cannot choose it for the CMS track definition.
    Any advise ?

    1. Go to CMS/Landscape Configurator/Domain Data
    Make sure SLD URL field has correct data and press "Update CMS" button.
    CMS will sync component data from SLD.
    Regards,
    Slava

  • Ap 1231G cannot register to WLC

    Hi friends:
    my wlc version is 7.2.115.2.
    ap 1231G version is c1200-rcvk9w8-tar.124-21a.JA2
    the ap cannot register to WLC.
    the lap is used stats ip address,its can pinged to wlc.
    Version does not support?
    and the other ap is 1241 version is 12.4<13d>JA.its can register to wlc
    only this 1231G can not register.
    this picture is my WLC ap join stats detail.
    Thanks
    cena

    HI Cena,
    This error message means that the controller received a discovery request through a broadcast IP address that has a source IP address (given), which is not in any configured subnets on the controller. It also means that the controller dropped the packet. This typically happens when the u trunks all allowed VLANs instead of restricted them to wireless VLANs.
    Please allow only specific vlans.
    Complete these steps in order to resolve this problem:
    1.If the controller is on another subnet, the APs must be primed for the controller IP address, or the APs must receive the controllers IP address using any one of the discovery methods.
    2.The switch is configured to allow some VLANs that are not on the controller. Restrict the allowed VLANs on the trunks.
    Regards
    Dont forget to rate helpful posts.

  • Cannot register my copy of CS6

    I purchased Creative Suite 6 from an Adobe authorized reseller. The software is working, but I cannot register CS6 on the Adobe Site. The message says: You cannot register your software because your serial number come from a volume licensing program. Is it legit for a reseller to sell copies from volume licensing program?

    You'll have to inquire with sales support for the specifics...
    Mylenium

  • Cannot find the CMS server running on port 6400?

    Hi all,
    I can see all the servers running on bo xi 2 other than the CMS server. If i start running using Administorator nor through the windows administration it displays the message
    "Cannot find the CMS server running on port 6400?"
    Can anyone explain me how to recitify this issue ?
    Thanks
    Pooja

    On the CMS server launch the CCM and then the CMS is likely red (not started) try to manually start it, if it fails check windows event viewer for errors to see why it failed. Could be the service account (try local system if not specified already).
    Regards,
    Tim

  • "Access denied. You cannot log on to an older version of the CMS"

    Post Author: dnaman
    CA Forum: General
    Hi All,
    I recently installed Crystal Reports XI (11.0.0.1282) on my desktop and am trying to save a report to Crystal Enterprise 10. When i try to save it, i get the error above - "Access denied. You cannot log on to an older version of the CMS".
    Is it possible to connect to CE 10 with CR XI or do i need to get CR 10 as well? I would have hoped there would be backward compatibility.
    Thanks in advance,
    dnaman

    Hi,
    CR 2008 is not compatible with BOE XI R2. The Crystal Reports 2008 report designer is unable to log into XI Release 2 or older servers.
    The functionality that depends on an enterprise session is unavailable. If you are using one of these report servers(CRS XI/XIR2 or BOE XI/XIR2), we recommend you use the Crystal Reports XI or XI Release 2 report design tool.
    The corresponding server for Crystal 2008 is BO XI R3 which will support all the new functionalities present in Crystal 2008.
    I hope this helps you.
    Regards,
    Prashant.

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • TS1646 hello  I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

    hello 
    I have problem with regist my visa and I cannot buy from store
    the message came in the end of form is says
    the phone number must be a 7-digit number
    and I have writed but not accepted
    iam from saudi arabia
    my mobile is 966504850992
    pls answer
    thanks
    dfr aldossary

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

    On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
    It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

    Try Here  >  AMDS  >  http://support.apple.com/kb/TS1567

  • I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

    I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

    you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

  • JDBC receiver error Cannot establish connection with the registered driver

    Hi Expert,
    I am constructing a proxy to JDBC scenario. And I am getting error saying "
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
    I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
    Charles

    Hi,
    Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
    check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
    please go through below thread,
    SQLException: Io exception: The Network Adapter could not establish the con
    regards,
    ganesh.

  • How do you register iLife software that came preloaded on an iMac (I cannot seem to locate the Marketing Part Number) on the DVD?

    I just purchased an iMac with iLife and iWork preloaded.
    I wanted to register the software, but I cannot seem to locate the Marketing Part Number (MPN).  Help states the MPN is located on the product packaging near the barcode.  I can locate the barcode on the sleeve of the disc, but the MPN does not seem to be there.  Help states it starts with a letter and has the format M#####/#.  I have tried to enter each set of numbers shown, but all are invalid.

    You registered it when you registered the computer. Apple software bundled with a Mac can't be registered separately from it; that service is for standalone purchases only.
    (58748)

Maybe you are looking for