Cannot reinstall 10.8 on new Mac mini

OK, so here's what I did so far:
Bought a new Mac mini (i7)
Moved apps and data from my old Mac mini using the migration assistant
All went smooth up to here. Now what I want to do is do a fresh installation of Mountain Lion
after all. And this is where the problems start.
I still have the downloaded Mountain Lion app on my external hard drive. When I
double click on it it tells me that my Mac is not compatible with Mountain Lion.
OK, may be it's outdated (the installer). So I went over to the App Store trying
to download the installer again. No such luck: The App Store also tells me
that I cannot download this software because my computer is not compatible
with Mac OSX 10.8
Does anyone have an idea what might cause this sudden incompatibility?
Thanks,
Christian

The OS X 10.8.2 that shipped with the October 23 announcement hardware (including your new mini) is a special hardware build that does not exist in the App Store. Any prior Mountain Lion installer that you may have had laying about, will tell you it cannot install. OS X 10.8.3 when it arrives, should rectify this issue.
You will need to to do a clean install from Apple's Internet Recovery HD.
Make sure you have a wired Ethernet connection. Reboot holding command+option+R. This will fetch the special version of Mountain Lion from Apple specific to your mini as it was shipped.

Similar Messages

  • Before I reinstall CS4 on my new Mac Mini what do I need to know?

    I migrated all my data from my old Mac Mini to my new MM.
    Photoshop on my new MM still thinks it's on my old MM.
    i.e. The RAM available still reflects the RAM available on my old machine.
    i.e. I had 4 GB on my old machine.
    I now have 16GB of RAM available but the settings from the old machine
    were migrated over to the new machine so the new machine thinks I only have 4gigs ram.
    Would the best way to fix this problem be to uninstall my old software and reinstall it
    on my new machine?
    What precautions should I take?
    Is it pretty straight forward?
    Thanks

    Yes, always do a clean install. You have up to 2 computers to activate it on so don't deactivate the old one until you are sure the new is fine. Photoshop is not a "drag to the app folder" install. It decides what your system has and places the correct files all over it. Also use the Uninstall utility in the Photoshop folder, never drag it to the trash.
    The reason that PS CS4 reports 4 GB is because CS4 is 32 bit only on any system. 32 bit can only address  a max of 4 GB ram.
    64-bit OS benefits, limitations
    So while a reinstall is a good thing, it won't see all of that ram.
    No way to get by that except to install CS5 or later.
    Gene

  • Cannot install premiere elements on new mac mini?

    I have installed photoshop elements 10 and updated the software. Premiere elements 10 gets an error message on install. this is the crash code for reading the error message that was sent to support 00-41590-174127012012. please help. Mac mini is at osx10.7.2

    Photoboy51 after reviewing your installation log I believe your difficulties can be resolve by completing the steps listed in Updated installation instructions | Premiere Elements 10 | Mac OS.  Please feel free to respond to this thread if you have any questions about the steps listed within the document.

  • New Mac Mini - How do i reinstall my copy of Mountain LIon from App Store?

    Hi All:
    I just bought a new Mac Mini running Mountain Lion. I want to clone an older system drive that had been running Snow Leopard onto my new Mini and then upgrade to Mountain Lion (I tried Migration Assistant first, but it didn't work correctly and I don't want to mess with it again).
    My question: once I have a working Snow Leopard install on my Mini, is it possible to upgrade back to the Mountain Lion OS it came with without paying for a new copy? How do I do that?
    Thanks!

    It isn't just the hard drive - there is firmware built in that will prevent you from booting wih Snow Leopard. If you do a search here, you'll find many threads trying to install an earlier OS than what the machine came with all with the same answer (unless the Mac was built right around the time of a new OS being introduced, then it is possible to be booted from both OS's). In this case, you'd be trying to go backwards by 2 versions. Also see here:
    http://support.apple.com/kb/HT2186?viewlocale=en_US
    And yes, if you use internet recovery and first erase the drive (available in Disk Utility within the recovery partition) and then reinstall the OS, it'll reinstall the OS on a blank drive and you can start over. If the machine is new, then Command + R during restart should automatically boot into internet recovery (connecting you to Apple's servers by showing a spinning globe while connecting); if the machine is a bit older, then Command + Option + R will boot into internet recovery.

  • I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

    I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
    Using 2 displays, connected via HDMI and thunderbolt
    Been on to support a number of times now - is anyone experiencing the same issues?

    BUMP.
    I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
    kernel[0]: Previous Shutdown Cause: -128
    I don't know if that's related or not, but maybe helps?

  • Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

    Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
    Have tried all tricks found on the net and followed every advice from apple support.
    Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
    Very nice and fast mashine, wouldnt like to return it.
    thanks allan

    Is that an Apple SSD?
    what model is it?
    Is there a firmware update if non Apple?
    Lion is not server version.
    Windows is ? ISO or retail?
    Google macmini Windows 7 SSD Apple Boot Camp

  • I cannot install Lion to a backup drive for my new Mac Mini

    I just bought the new Mac Mini with an i7 processor last week. I wanted to format a backup drive for it. When I tried to use the Lion Recovery partition on the new Mac Mini, I keep getting an error message that says it's incompatoble with the current model.
    I also tried to use the Lion thumbdrive I purchased from Apple to see if that can be used, but it also give me the incompatible message.
    Is there a special version of Lion that's only for the new Mac Mini's?
    Any help is appreciated!

    Read this, it will explain it: http://support.apple.com/kb/HT4905
    Mac mini (Mid 2011), MacBook Air (Mid 2011): Use Lion Recovery instead of OS X Lion USB Thumb Drive
    Last Modified: September 01, 2011
    Article: HT4905
    Summary
    Learn about using Lion Recovery or the built-in OS X Lion recovery partition rather than OS X Lion USB Thumb Drive with computers released after OS X Lion.
    Products Affected
    MacBook Air (13-inch, Mid 2011), MacBook Air (11-inch, Mid 2011), MacBook Air (Mid 2011), Mac mini (Mid 2011)
    Use Lion Recovery to restore Mac computers released after OS X Lion. If you attempt to use the OS X Lion USB Thumb Drive, a message will appear stating that you cannot install this version of OS X on your computer. This is correct behavior to make sure you install only the correct and most up-to-date version of Mac OS X on your computer.
    Note: You can also use the Lion Recovery Disk Assistant on your Mac to create a bootable image to make sure you recover the correct version of OS X Lion. To use the Lion Recovery Disk Assistant, you need to have your own USB drive.
    Additional Information
    If you have a network connection, you should receive the appropriate version of Mac OS X when using the built-in Recovery HD partition on Macs running Lion.
    Learn more about Lion Recovery.

  • How do I clear the Disk and reinstall the OS on my new Mac Mini without an Optical Drive?

    How do I clear the Disk and reinstall the OS on my new Mac Mini without an Optical Drive?

    If it's a new mini, should have Mtn Lion on it. In any case, restart into recovery mode, and follow the instructions.

  • I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

    I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

    Bluetooth: How to set up your Apple Wireless Keyboard

  • Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

    I am exhausted just getting to the point of being allowed to ask my question.  I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now.  I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store.  Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt.  I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

    How is the Mini coonected to the momitor?
    Does the power button n the mini not work?

  • I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine

    I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine - files too big
    Please assist

    You need to download it on one of the iMacs via App store but not install since after it installs the installation download gets deleted.
    After it is downloaded you can copy to a USB device. You can also make a bootable USB install device by:
    downloading and using DiskMaker X

  • Cannot use pages on new mac mini

    I got  a new mac mini & have a bunch of documents, but I cannot look at them.
    I've tried pages, but it wants a software serial number.
    I don't have one & when I go to buy one, it says that I have the program.
    I just cannot use it.

    There's a long standing issue with the old downloadable trial version of iWork applications and the boxed DVD version and current Mac App Store version. A longtime iWork user created an AppleScript that deletes all the old trial version files. Look for the file named Uninstall iWork 09 and run it.

  • Cannot get new Mac Mini to detect TV

    I've just got a new Mac Mini which I wanted to connect to my TV via HDMI. I used to use my Macbook to connect to it using mini DVI to HDMI and it worked fine but the Mac Mini doesn't detect it at all. I've tried changing the resolution and various other things but no luck. Any ideas how to get it working?

    Install the recent EFI firmware update for your mini that was just released. It should be available through software update. Do one power cycle of your mini after this firmware update.
    Power your mini off. Power on the TV and switch to the specific HDMI port connected to your mini. Now, power on the mini. See if this TV first scenario and the firmware update resolve your TV detection and HDMI picture.

  • Spotlight is not working on brand new Mac mini

    Hi,
    I got an issue with two brand new Mac minis running 10.7.3 (11D50d):
    Spotlight is not working. I'm only getting the Wikipedia-Search.
    Here's what I did:
    Installation:
    - took the stock Minis and set up two users, admin and user (limited account)
    - updatet the System
    - installed manually: Adobe Reader X, Office 2011, Firefox 12, Flip4Mac, Perian, Cyberduck, Google Earth 6.2 (the installer without the updater), VLC 2
    - installed using AppStore: CalendarBar, TextWrangler, Unarchiever
    - copied a few documents (Word and Excel files) from a PC to the Desktop
    Troubleshooting:
    - tried to restart Spotlight by adding the entire harddrive to privacy using »Spotlight« within the System Preferences
    - that threw an error "no priviliges"
    - started the System from the recovery system (on an USB-thumbdrive) and repaired permissions
    - that did not help
    - tried to restart Spotlight through the Terminal, running the command: sudo mdutil -E /
    - that command returned: No index.
    - the tried: sudo mdutil -i on /
    - returned: Error: unable to perform operation.  (-400) No index.
    - went the hard way
    - unloaded the daemon: sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    - erased the Spotlight folder: sudo rm -fr .Spotlight-V100/
    - loaded the daemon: sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
    That made everything work fine until I did a restart of the System. After the mini restarted I was back at square one...
    Does anyone have an idea how to fix this issue?
    Apple support suggested to reinstall the system. Something I can't do right now, as people need to work on those computers and cannot take a tow hour break...

    Hi Ray Land,
    We can help narrow down the cause.  What operating system are you using on your new Mac Mini? 
    If you are running the Mountain Lion OS, you can download the latest driver here.  An important note is that the current print queue must be deleted before installing the new driver.  This will ensure proper communication.
    If this doesn't work or you need further assistance, please contact us here.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • New Mac Mini can't send mail, but can receive

    Just received my new Mac Mini the other day but have had problems sending mail. I can receive mail, but cannot send at all. I believe I have all of my settings correct. What can I do, it's very frustrating.
    rskover

    One thing is for sure, I didn't find Roadrunner's http://help.rr.com/HMSLogic/emailhelptopic.aspx to be very helpful.
    For the heck of it, for outgoing mail port, try custom port instead of default port and enter 25, 465, or 587 singly each one at a time and see if that buys you anything. If they use SSL (and that wasn't apparent to me from their help page whether they do or not) you would likely want to try username/password authentication for smtp.
    Also, you might take a peek in Keychain Access and delete any existing entries that pertain to anything wi.rr.com. Mail would then re-prompt you for that account login information when it attempts to connect to the smtp or pop servers.
    If the old computer was Leopard, have you tried copying over your $HOME/Library/Mail and $HOME/Library/Mail Downloads folders and your $HOME/Library/Preferences/com.apple.mail.plist file to the new computer?
    Have you called the ISP and told them that the old computer works fine and the new computer with identical account settings doesn't and that you would like to doublecheck with them the account settings (type of account is POP? what is POP port?, what is SMTP port? verify pop and smtp server names, using SSL on POP? On SMTP? Do they use password authentication on SMTP? (If they use "None" that implies they use the WAN IP address to authenticate -- if its one of theirs, your good)
    I don't think reinstalling Mail will gain you anything.
    At least we know who the ISP and mail provider is, maybe another user/helper that has the same provider can weigh in here. I do not use rr.com so any other advice from me at this point would be like drawing random straws.

Maybe you are looking for

  • Problem with iterator in tableview

    Hi, Im having a problem with an iterator in a tableview. Sometime ago I use an iterator in a BSP with flow logic, I created the class fill the methods GET_COLUMN_DEFINITIONS and RENDER_CELL_START. And worked fine. Now, Im working in another BSP and t

  • Itunes wont open says error 7 (windows error 127)

    Ive tried uninstalling and reinstalling but nothing seems to work. I have windows 8.1

  • How to maintain Space between text in Smart form

    Hi Experts, How to maintain space between text in smat form. For example I need to maintain like this Prepared By:                       Passed By:                  Approved By:            but after save it come like this  Prepared By:   Passed By: 

  • Problem in calling otf to pdf

    Hi, i had added a code in which there is conversion of the otf format to pdf ,i had done the syntax check which says the program is right ,when i execute it ,it work ok but at the when come back from the output screen it is giving the run time error

  • Movie workflow advice... help!

    Hi, I'm a Logic noobie and need to do this: I need to mix 2 stereo audio tracks together and then add them to a DV movie (replacing the preexisting audio on the movie). I figured I would bring both tracks into Logic, adjust relative volumes using tra