Cannot reinstall CS4 to my new hard drive. Message of Errors and installation failure. Using original CS4 program disks and also tried to reload from adobe on internet

Tried to re-install photoshop CS4 to my new hard drive. Message of "Done with errors" and installation failed. Used original disks and tried to load from adobe site on internet. Will not load.

Your HD wouldn't be formatted as case-sensitive, would it?
Beyond that, details are needed:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

My hard drive failed and during the setup of Illustrator CS4 on my new hard drive/pc, I was told I had reached the maximum number of licenses

My hard drive failed and during the setup of Illustrator CS4 on my new hard drive/pc, I was told that the maximum # of licenses for my serial number had been reached and so I am unable to install Illustrator on my working computer. This happened a couple of years ago and I called Adobe and they were able to 'reset' things but I don't see any way to talk to someone now to resolve this problem. BTW, I have the failed hard drive slaved in my new computer and am able to access files and such things, but have no way of uninstalling the Illustrator on my old drive. How do I fix this issue?

Contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

How can the number of used computers used for itunes be updated? I had to reinstall itunes on a new hard drive

How can the number of computers used for an iTunes account be updated? I had to reinstall itunes on a new hard drive it and counted as an additional computer, against my 5 total computers.

wait until you reach the limit of five authorized machines. then, once a year, you will be able to deauthorize all machines, following which you can reauthorize those computers you currently use/have access to.
click here for more information.

My hard drive was replaced last week. The geek squad from Best Buy backed up all my information prior to replacing the hard drive. they reinstalled everything on the new hard drive including iTunes. When I opened I tunes, my playlists were missing

My hard drive was replaced last week on my macbook pro. The geek squad from Best Buy backed up all my information prior to replacing the hard drive. They reinstalled everything on the new hard drive including iTunes. When I opened I tunes, i had some but not all my songs listed. All my playlists and purchases were missing. I attempted to sync my iPod so my playlist and information would be reinstalled but iTunes does not recognize the iPod to allow it to sync.

Hello Boylen33,
I was very disappointed to read about your experience when taking your phone in to the Geek Squad for service. I agree with avm5689, purchasing the Geek Squad Protection plan is a great way to protect your investment in a product that is so necessary to our everyday lives. The agent should have known exactly what steps to make the exchange an easy, and smooth process, and I sincerely apologize for the frustrating experience you received instead.
I assure you every single post on the forum from our customers is of utmost importance to us, and we are always happy to help in anyway we can. As per the terms and conditions of your Geek Squad Protection plan, you should receive one battery per the life of the plan, and you can order it simply by calling our Partstore. As I mentioned previously, this is something the Geek Squad agent should have explained to you, or as the mobile specialist did, call them for you, and I'm truly sorry this wasn't handled in that manner causing you to waste a lot of time at the store. Using the e-mail you registered on the forum, I was able to locate the service order, and I will be documenting your experience for further training opportunities.
Once again, I am very sorry for any disappointment this has caused, and I appreciate very much you bringing this to our attention. I hope you will give us another in chance to offer you a much better experience.
Respectfully,
Maria|Social Media Specialist | Best Buy® Corporate
Private Message

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

What does "the registration won't let me" mean? If the serial number is rejected, contact support by web chat. for anything else you need to provide proper technical information and actually explain your issue.
Mylenium

How can I reinstall Mountain Lion on new hard drive?

I've had to install a new hard drive as old one was failing.
Have loaded Snow Leopard from disc onto the new drive but can't install Mountain Lion which I was running prior to drive failure; very frustrated.
Have tried several options.
1. Tried to reboot from OS X Utilities but whenever I restart, holding the cmd + R keys, I can only ever get the standard screen. I've tried pressing keys early in restart, later in restart, keys on either side of the keyboard, cmd + alt/option + R but still can't get to the OS X Utilities.
2. Having given up on 1 I've tried to download ML from my purchase history in iTunes. I can see the purchase recorded but there appears to be no way to get to a reload option - at least not in the iTunes loaded from Snow Leopard
3. I tried downloading ML updates, hoping that might allow me to bypass 1 and 2. The download wasn't recognised by my machine.
4. I've be willing to just buy the **** OS again from scratch but iTunes won't allow me to do that either, at least not using my current Apple ID.
Does anyone have any bright ideas? I hate bloody computers.
Mike

enigmatix wrote:
Csound,
Do you have any suggestions why I can't open OS X Utilities.
Thanks,
Mike
How old is your Mac, if it came with 10.6 installed it is too old to have Internet Recovery (command-option-R) And as it has a new hard drive you won't be able to use Recovery (command-R) either until a new copy of Mountain Lion is installed and ceates a recovery partition on the drive.

HT1229 My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my

My iPhoto Library (version 8.1.2) is 280GB (greater than 50% of my 500GB total storage memory on my iMac. It was too large for me to drag it to a new hard drive so the Apple geniuses did it for me. However they did not delete the Library from my iMac (that's my responsibility). I dragged it to Trash and when it started to move I clicked over to the new hard drive to confirm it had indeed been copied. I became nervous when I didn't see among the few files on this otherwise empty new hard drive anything that resembled a 280GB Library so I cancelled the migration to trash.
How can I be sure that my iphoto has been copied and that all my "metadata" survived in tact?

the new backup drive
I thought the new drive would be your data drive to host the iPhoto library. Do you also use it for TimeMachine backups?
I am unable to search either in email as well as Finder. I AM able to search within iPhoto though, thankfully
Spotlight may still be busy rebuildig its index.
You could try to rebuild the Spotlight Index, if you do see no progress:
Spotlight: How to re-index folders or volumes
I hope, other frequent posters will drop in. I have not used iPhoto 8.x in long time.

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contactin

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contacting you

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

I had a computer crash and Hard drive data lost, so I reinstalled Itunes on my new hard drive and now cannot locate ALL of the purchases I had done in the past.

I thought that ALL itunes purchases were held on the Apple server for itunes.
When I reinstalled my itunes on my new hard drive, there were NO histoical purchases on my itune account.
Any thoughts to a solution.
Thanks

Make sure you have at least iTunes 10.3.1, then go to the iTunes Store, log into your account, and click the new Purchases link under the Quick Links. The new iTunes in the Cloud service may allow you to re-download your purchased content (music, videos and TV shows not available for re-downloading in all countries at this time; movies and audiobooks not available for re-downloading at all yet). You can also do this from an iOS device.
For more information, see:
http://support.apple.com/kb/ht2519
Regards.

Please help! Cannot access TC backups on new hard drive with Lion!

I know this seems like a generic posting, and believe me that I have searched through countless posts to find the situation most similar to mine. To start, the basic story (I am pretty computer illiterate, so excuse the lack of terminology):
-My computer was working slow, beach balling, etc. two weeks ago - took to Apple Genius Bar for help and they suggested need for new hard drive. I already had a hard drive crash in January, but since I have had a Time Capsule running Time Machine since September 2009, I hooked it right up and restored from a backup with no issue... so I wasn't worried about this. I waited to make sure that I had the most recent backup (and needed to use my computer for law school for a couple days), so I turned it in a day later immediately after a complete incremental backup via TM on my TC.
-Got my computer back from the Apple "depot" with new hard drive and hard drive cable.
-Had an extremely hard time getting my TC to link to my computer and via AppleCare phone help, realized that Apple had given me back my computer with Leopard, and they said that I needed to go back to the store to get a Lion reinstall since the backups had been done in Lion.
-Went back to Apple store, reinstalled Lion... they told me there would be no issue once I got home and hooked up to TC. Connected to TC via ethernet and went through "set up" procedure as if it was new computer - could never get past the "Select the Disk" page. Either it was beach-balling or just sitting there, and I couldn't click continue or anything.
-Called AppleCare again, they said to try it through Migration Assistant instead of Set Up... again, could not connect to TC. They said it was too complicated to do over the phone and sent me back to the store...
-By now, I am on vacation and spent 5, yes FIVE, hours at another store trying to migrate the data to no avail. I obviously don't know everything they tried, but I know they tried installing each operating system since Leopard, going through set up and migration assistant, and doing a disk repair of the TC. None of this worked. Every single time my TC connects and you can see the title of the drive ("Data") and the two separate backups ("emilysmac" was my old computer and "emilysmacbookpro" was the dummy one we tried to make). Emilysmacbookpro was accessible with no data on it, but once we clicked on emilysmac it just said "connecting" forever and never did anything.
Basically:
-300GB of my TC shows that it has been used, so I know something is there.
-I can also pull up the data on another computer, and it shows files dated from September 2009 up to the date I last updated, but they do not look how they used to - they are "Unix Executable" files and cannot open through Time Machine.
I have a really hard time thinking that my TC AND my computer hard drive failed at the same time - which is actually what Apple suggested to me. Is there anything that anyone knows that will help?! I am desperate here! This TC had backups of all my music, pictures and law school work over the past 2.5 years. Any help would be much appreciated!

PS I have also looked through Pondini's site, but I am not sure if I am missing something since I don't totally understand all of it. Thanks again!

Pavilion 7 Bad Hard Drive, How to reinstall HP software on new Hard Drive?

Hi, I have a 2 1/2 year old p7 1247cb running Windows 8 Pro x64, just out of warranty, and the Hitachi internal hard drive is failing (eightforums.com helped me with diagnostic tools). I am replacing the HD and want to reinstall the whole system that was on the machine when I bought it. It came with Windows 7 and a promotion for free upgrade to Windows 8, which I did. I have my Windows 8 Key Code and have borrowed the installation files for Windows 8.
This is the first time I've done this sort of replacment, and I am wondering whether it's possible, or even desirable, to get all the manufacturer-installed drivers and software back on the new HD, or should I just let the Windows install search for all drivers for me?
Until the HD started failing, this was by far the most reliable desktop setup I've ever used, and I am wary about whether the new system, with cobbled-together drivers, will be as stable and reliable as what I had with the manufacturer-installed software and drivers,
Plus, as an aside, I want to vent for a moment that it seems crazy to me that a hard drive should start failing after just 2.5 years! This bundle was sold as a gaming system (it's never used for gaming, but the specs were what I wanted), and while it gets heavy use (mostly streaming video, wordprocessing, photo/video -editing and storage), I was surprised to encounter a hardware issue only 6 months past the warranty.
Any assistance is appreciated.

Hi,
Hard drives are mechanical and do fail. It's quite common in the industry and not just with HP.
Be sure that the new hard drive is not an advanced format hard drive and is not greater than 2TB.
Back up your data to external media if you can. If not then you will need to later use for backups.
Be sure to create the external HP recovery media (this should have already been done right after you received your PC).If you don't have the external recovery media then order it from HP. HP Recovery Disks. Performing a HP System Recovery with Windows 7
Replace the hard drive and then boot up the external HP recovery media and recovery your PC back to a factory day one condition.
Now you can reinstall Windows 8 using your "borrowed Windows 8 media".
There may be other ways of installing Windows 8 but I have given you the text book method. A generic key method, mentioned by me on this forum long ago and just recently revisted by another forum member may work.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Reinstall Visio 2010 on new hard drive

I had a hard drive crash and need to install Visio Professional 2010 on my new hard drive. I have my Serial Number / product key. What site can I download it from?

I had a hard drive crash and need to install Visio Professional 2010 on my new hard drive. I have my Serial Number / product key. What site can I download it from?
This article may be helpful:
http://office.microsoft.com/en-au/products/download-backup-restore-microsoft-office-products-FX103427465.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

My computer has had to have a new hard drive how do i get my iphone to sync all the music and info on it please?

I Have had to have a new hard drive fitted to my sony computer and it has wiped everything off. I have reinstaled itunes, how do i sync the info on my iphone to my computer as i cant seem to sync the contacts or the music. Please can sombody help me as i'm not great with computers?

If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
http://www.wideanglesoftware.com/touchcopy/index.php

Installing a new hard drive. How to make installer dvd from current OS

I have a iMac G5 (PPC). 2004 when I got it. And have the original HD. 150 GB. Following Murphy's Law this HD is due for failure. I have bought a 1 TB. new hard drive to install on this machine. I forgot which OS came with it (10.3) I think. My set up is that I back up my iMac G5 (PPC) to a external Hard drive (300GB) with Time Machine. I have updated thru software update to 10.5.8. But have no DVD installer for 10.5.8.
How can I make an installer for my new hard drive? Or should I partition new 1TB hard drive with the same amount of space as my time machine back up? I may not put everything on current system on new drive.

If the old harddrive is working, why don't you copy the old to the new?
In Leopard, you can resize partitions without loosing data.
Here are two utilities for making a complete backup of your internal hard drive. I've recommend using one of these so that you can create a bootable system on your external hard drive. ( PPC require a firewire connected drive. ) Once created, you can run your system from the external drive. Hold down the option key on your keyboard then power on your machine. This will bring you in startup manager click on the drive image you wish to boot then click on the arrow key to the right.
"Clone, synchronize, backup. Schedule and forget it."
http://www.bombich.com/software/ccc.html
"SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless."
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html

Reinstalling Windows 7 to New Hard Drive with only the Win 7 Upgrade Disc?

So I have an e9180t which like clockwork freezes up after about an hour or two after booting up. I thought it might be the curse of the bad motherboards they came with, but I am hoping it is something else so testing everything I can. I noticed it does not freeze up when booted in safe mode with networking. The hard drive did fail the SMART test so I am wondering if it's time to replace it and if that has something to do with the crashing. I can move cursor, but no apps will open and eventually everything becomes unresponsive causing be tohit the power button to reboot. I already stopped all unnecessary start up programs and it still will freeze in non safe mode.
The PC came with Vista and I believe that's what is on the backup partition on the HD. I do have the Win 7 Upgrade disc from HP. My questons are-
1. If I buy a new HD will the 7 upgrade disc be enough to install full version of Win 7?
2. Anything else I need to do when I install new HD besides reactivate Windows?
Thanks.
This question was solved.
View Solution.

Hi Mike,
Did you create an HP recovery disc set for reinstalling the factory image when the HDD is replaced?
It sound like you may have a problem creating the recovery discs now.
A Smart HDD test failure points to a failing HDD. The symptoms you are experiencing are most likely caused by this fact. You may also have a motherboard or other hardware problem.
You have the Win 7 Upgrade disc and product key.
I am fairly sure the Win 7 upgrade has to be initiated from within Win Vista. The Win 7 upgrade is a full install of Windows so that is not the problem. But it may not run setup unless you start the upgrade in Win Vista. Normally a Win 7 upgrade is started within the current operating system, Win 7 setup validates the existence of a qualifying operating system, and then prompts a reboot to finish the upgrade installation.
You can replace the HDD and try to install Win 7 cleanly. If that fails and you don't have the Vista recovery discs you can purchase an HP recovery disc set here. There are three different builds available. Select the one that matches the factory installed operating system.
You may have one other issue upon replacing the HDD with a newer Advanced Format HDD. Please see this HP Support document for more information.
If you cannot install the Win 7 upgrade cleanly or Win Vista because of the Advanced Format HDD issue, you may have to purchase an OEM copy of Win 7.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
Errare humanum est.

Cannot reinstall CS4 to my new hard drive. Message of Errors and installation failure. Using original CS4 program disks and also tried to reload from adobe on internet

Similar Messages

Maybe you are looking for