Cannot reject/delete sales order line item due to del.date in 2210

Hi all,
not sure if anyone else had this issue already....
Situation :
Sales order line item entered with delivery date in 2210. We would like to correct this order but can't....
every time SAP issues error :
Error determining posting period (info
S008, variant GL, RC 3)
I believe this is because we haven't maintained our calendars yet for 2210 :-D
Question : without us having to load/define the calendar...is there a utility/oss program which we can use to delete the line item, or reject it...or even update the delivery date?
Thanks for your help!

If the system pop ups the error message M2012, then please refer note 10891 or 37532. If the error message number is different, please update the forum.
thanks
G. Lakshmipathi

Similar Messages

Information about the deleted sales order line item in idoc.

Hi Experts,
I am new to IDOC.We have the following idoc requirement,
When a line item is deleted from the sales order(VA02) ,
the outbound idoc getting triggered for the sales order has the information about the rest all line items other than the deleted line item.We now want the information about the deleted line item in the Idoc .
Please help me in proceeding further.

Hi,
I am facing the same scenario of capturing the deleted sales order line item in idoc.
I am using ORDRSP message type , where in E1EDP01- ACTION contains value "000" .
And the Deletion line item is not been captured, is there any configuration setting required to
capture the deleted line item in Idoc.
Based on the posting in this thread i understand that there is an indicator which has to be set .
Please let me know what is that indicator and how to set it?
Thanks
Sathish

FM/Transaction/BAPI to delete sales order line item in APO

Hi,
Could you please share the details of FM / Transaction / BAPI to delete sales order line item in APO?
Tcode - SDORDER_DEL / FM - BAPI_SLSRVAPS_SAVEMULTI2 delete the complete order with all its order items.
Even the OM function modulesdelete the complete order. We could not locate a BAPI/FM for deleting only specific line items of a Sales order...
Thanks,
Arvind.S

Hi Arvind,
Can you try the below:-
Function module : BAPI_SLSRVAPS_REMOVEITEMS
Bapi object type: BUS10501
Using this, one can delete One or More Sales Order Items / Schedule Lines.
Please confirm
Regards
R. Senthil Mareeswaran.

Deleting Sales order line item

Hi,
The sales order line item deletion should not be allowed after accouting of the advance payment is happened.
How to achieve this.

Hi Seema
As far as I could guess you need to grey out VBAP-ABGRU field once you have posted payment for the sales order line item. Since this is a SD related process no validation or substitution would work in this. In this case when posting the incoming down payment through F-29 internally you need to call the user exit in the sales document to update the status of VBAP-ABGRU.
Thanks
Indranil

Due to deleted Sales order line items and Archived Sales order is still showing as Incomplete in BW as Open Order reports because of Incorrect SAP R/3 Rejection Status("A") in VBUP table.

In a archived saler Order user had deleted Line Item and completed overall sales order. Now this sales order is archived, but it is stll appearing in BW report as open order because of deleted item with rejection Status is maintained as “A” (Not yet Processed).
We want to change this status from "A" (Not yet Processed) to "C" as completed.
I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
Could you please help me to correct way to do it???
Thanks in advance....

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

Hello Experts
I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
use GR Doc date as billing date
3rd party sales process (w/o ship notif) - Billing

Hi Lakshmipathi ji,
As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
For Ex
Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
Regards
Hiba

Sales order line items delivery cancelled but still appears in MD04.

Hi PP Gurus,
In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
Thanks and Regards,
SHARAN.

Hi
Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
Regards
Brahmaji

Sales order line item delete error for MTO sales order

Dear Experts
iam facing below error for MTO sales order line item deletion
"For reasons of cost management, item 000040 cannot
be deleted"
Please help
Regards,
KEdar

It looks you try to delete the sales order line item and you get this error message.
Try to put reason for rejection for the line item and save the order. This is equal to deleting the line item.
You can also refer the OSS note 14097 - Order item cannot be deleted/overwritten for further information.
Regards,

Restrict deletion of sales order line items

Hi,
I need to restrict deleting of sales order line item, I think we can use the user exit, MV45AFZB, USEREXIT_CHECK_XVBAP_FOR_DELE.
But when i set the flag to 'X', even though it does not delete at tht instance when the sales order save is clicked again the line item gets deleted.
ANy idea , to prevent that?
Thanks
Keshi

Hi Keshi,
That is the correct exit, we are using the same without any problem. Just set US_EXIT = CHARX.
Regards,
John.

Mass Deletion of Sales order line items

Dear Gurus..
There is a transaction VA02 for change and deletion of sales order line items. it takes time to delete line item of sales order one by one.. is there any abap program to do this process..
if so please let me know
regards
Saad Nisar

Hi,
You can use trx MASS with object type BUS2032 to change sales order items. Please check this link:
Re: Mass deletion of sales orders
Or try LSMW.
Regards,
Csaba
Edited by: Csaba Szommer on Apr 10, 2009 8:18 AM
Edited by: Csaba Szommer on Apr 10, 2009 8:21 AM

Re-Cost (CK55) Marked Sales Order Line Items

My current client resets standards each quarter. They have requested to re-cost open CTO Sales Order line items and update the valuated sales order cost (EK01). I have reviewed the options available in CK55 - Mass Costing and find the processing log retrurns the following message:
   Cost estimate with status VO exists. See long text
   Message no. CK_MCSO014
   Diagnosis
   A cost estimate with the status VO already exists. This cost estimate will not be overwritten.
   System Response
   Processing continues with the next item.
   Note
   You can remove this message from the log with the customizing transaction User-Defined Error Management for Mass Costing of
   Sales Documents. The item will still not be costed, however.
Short of manually re-costing each open sales order line item. Is there a way to re-cost open CTO Sales Order Line items?
Regards,
Dewayne Wesley

I didn't realize there was a MASS Cost transaction.
Is there a MASS delete Sales order Cost estimat transaction? That would help.

Update Sales Order line item field

Need to update a field mfrgr of VBAP table with some user defined values on selection screen parameter.
I have selected all the Sales order line items in an internal table which need to be updated.
How can I use the update command with set expression to do the same ? If yes how ? if no what is the best way to do the same.

I am using the following command and it doesnt work as it says cannot use AND command.
          loop at it_vbfa.
                UPDATE VBAP
                WHERE VBELN = it_vbfa-vbeln
                and   posnr = it_vbfa-vbelv
                SET MFRGR = P_MFRGR.
                IF SY-SUBRC = '0'.
                   COMMIT WORK.
                ENDIF.
          endloop.
Any pointers ? What am I doing wrong.

Material Variant configuration in sales order line item from Ztable

Hello Experts,
we have configurable material and and creating sales order. from sales order line item if we goto configuration we can maintain variant configurations. My requirement is that when i click on configuration after selecting a line item i need to check ztable where i have material no and and relable text. if an entry exists i have to populate this relable text in one of the configuration filed. Can any one help how can i read and update configuration in sales order level and where to do this coding so that when i click on configuration the value from ztable populated in a field.
Many thanks in advance.

Hi Senthil,
It is simple.
When you create a characteristic which should have the value maintained in the Z table, go to the tab values. Here you have a push button called "Other Value check". Here you click this button and select the function module option. Now, in the window, you will have a place where you can mention the name of teh function module.
You create a function module with the help of your developer to find out the text maintained in the Z table using teh rules you have in your mind and update that logic in the characteristic. In the earlier screen, you just have to mention the name of the function module, thats all, your work is done.
Now when you configure, for this characteristic, the value will be automatically determined using teh function module. You have to create such characteristics as "Not ready for input" ones in additional data for which you cannot enter values manually.
Hope this helps.

Sales order line item check based on material status

Hi
I have the following requirement
There are Distribution chain specific material status maintained in the material master ( Sales Org1 View). Now for some of these statuses we need to reject these items in the sales order @ line item level. A reason for rejection needs to be assigned for these line items.
Is there any standard setting or a user exit is required. I believe user exit save_document_prepare could be used to carry out these checks & assign a reason for rejection. Pls suggest asap
Thanks
Ramesh

Dear Ankit,
The difference between reason for rejection and delivery block is,
Reason for rejection you can find this field at header level and line item level, the use of this is once you mention any reason for rejection the TOR or Schedule line not been confirmed for that material,so that the material can be confirmed to another customer.
If you set delivery block the material for sale order in case if the material not available it will rise TOR or if available it will confirm the schedule line and block the material for that customer or sale order.
This is the major difference between two.
Regards
Ram

Sales Order Line Item Details

Hi Experts,
Is there anyone knows in what variable or table does the line item number of the selected sales order line item after selecting any commands in Va01 transaction?
Points will be rewarded...
thanks in advance

Most likely in the user exits you cannot know what line has been selected on the screen. Normally VBAP-POSNR has the line number of the line being currently processed, but it's not the same line that user selected (i.e. clicked on) on the screen.
I think you can only get this information in the screen's PAI (I might be wrong though). If you need to pass this information further you could fill in a global variable in the screen's exit and then use it later in other user exits.

Cannot reject/delete sales order line item due to del.date in 2210

Similar Messages

Maybe you are looking for