Cannot remotely access DVR after second DVR was installed

We installed a second DVR and cannot remotely access the old one. The new one can be accessed from Android or HTML. When I attempt to access the old DVR I get the message "Internal Server Error"

Sorry to hear about the problems accessing the second DVR. Have you rebooted the DVR by unplugging the DVR box? If that does not fix your problem please send me a private message so I can re-do the port mapping.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Similar Messages

Cannot remote Mailbox Search after Discovery Mailbox was removed.

I was trying to remove the mailbox search by running
Remove-MailboxSearch "test" -Verbose and got the following error:
Can't remove mailbox search 'test' because there is still at least one mailbox on In-Place Hold.
The, I tried to run Set-MailboxSearch "In-Place Hold" -SourceMailboxes "ttesttwo" -InPlaceHoldEnabled $false and got the following error
Couldn't find the mailbox "/o=ExchangeLabs/ou=Exchange Administrative Group
(**)/cn=Recipients/cn=***" specified as the target mailbox for search 'test'.
My mistake was that I deleted the discovery mailbox. I went ahead and recreated the discovery mailbox with the same name but the LegacyExchangeDN does not match.
How do I go about changing the legacyExchangeDN in O365? Any other way to delete the mailbox search?
Thanks

Please try Set-MailboxSearch -Name Searchname -InPlaceHoldEnabled:$false
And then confirm the status.

HT4623 my ipad can no longer acces itunes store after iso 7 was installed... can i go back to ixo6

i can no longer access itunes store after iso 7 was installed... can i go back to iso 6

No you can't.
Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME for up to 30 seconds, until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any data settings. When your iPad restarts see if you can access iTunes.

After firefox 30 was installed this week the browser is slow but will not allow navigation away until finished

After firefox 30 was installed this week the browser is slow on sites with a large amount of information, data to set up,or many pictures or videos but will not allow navigation away until completely finished. Stop and back does not help it just continues the original site. Prior to release of 30 although slow it did allow navigation away or back.

Hello dexrek
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
'''also,''' in your system details we can see that you have in your[http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js] file.
(The user.js file does not exist by default. If you create the file forget it, if not, delete the User.js file. Note that some programs create and write in the User.js file also).
thank you

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Photosmart 7520 Scan software access disappeared when Windows 10 was installed.

Under Win 8.1 I would click in the printer desktop icon to select the connect 7520 printer. Three optins would be displayed and I would selec the middle one for scanning. Now that icon wants to setup the printer for WiFi usage, install printer to a USB port or come back later - no scan options. What do I needed to do?

Hi , Welcome to the HP Forums! I see that your HP Photosmart 7520 Scan software access disappeared when Windows 10 was installed. I am happy to help! Please try the steps within this guide, Scan Software Won't Open or Scan with USB Connected Printer (Windows), and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

EA2700 and remote accessing DVR

Does anyone have a solution for router settings to allow remote access to
DVRs both windows and Linux?
Solved!
Go to Solution.

Remote access feature is already enabled on the router.
Found these link sfrom the web that might help.
Enabling Remote Management on a Linksys Router
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=98e570a093ae4ccda0d7cfb7fda97df7_4023.xml&pid=80&r...
http://www.ehow.com/how_7469803_remote-access-dvr.html
For Linux:
http://www.howtoforge.com/configure-remote-access-to-your-ubuntu-desktop

L2TP Remote Access disconnects after a few hours.

Have a few users on Vista/7 using Windows L2TP to connect to our ASA5510. It is reported that after a few hours the connection drops. From what I have seen this can be anywhere around 5-6 hours. Of course my connection will drop after an amount of time has passed and no traffic has passed the tunnel. But the users are adament that this drops during large transfers; i.e. not a timeout issue.
Before I spend anymore time on this I just want to know if this is normal behavior for a remote access L2TP using Windows to disconnect on it's own after this amount of time. Never had a reason myself to remain connected that long, and when I did I used a site 2 site tunnel.

Below is a sample log of the time when disconnects occur, I highlighted in bold the problem area.
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec SA payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec nonce payload
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing proxy ID
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Transmitting Proxy Id: Remote host: 76.17.XX.XX Protocol 17 Port 0 Local host: 216.XX.XXX.XXX Protocol 17 Port 1701
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing NAT-Original-Address payload
vpn-7-713171: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, NAT-Traversal sending NAT-Original-Address payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing qm hash payload
vpn-7-714005: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Responder sending 2nd QM pkt: msg id = 00000017
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE SENDING Message (msgid=17) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) + NAT-OA (131) + NONE (0) total length : 172
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE RECEIVED Message (msgid=958052a1) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 68
vpn-7-715047: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing hash payload
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing delete
vpn-7-713170: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Received delete for rekeyed centry IKE peer: 76.17.XX.XX, centry addr: ad03bb38, msgid: 0x00000016
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, L2TP/IPSec: Ignoring delete to a rekeyed centry (msgid=16)
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE RECEIVED Message (msgid=17) with payloads : HDR + HASH (8) + NONE (0) total length : 52
vpn-7-715047: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, processing hash payload
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, loading all IPSEC SAs
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Generating Quick Mode Key!
vpn-7-715001: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Generating Quick Mode Key!
vpn-5-713049: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Security negotiation complete for User (sam5510) Responder, Inbound SPI = 0xc8ed80c2, Outbound SPI = 0xe007e1fd
vpn-6-602303: IPSEC: An outbound remote access SA (SPI= 0xE007E1FD) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been created.
vpn-7-715007: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE got a KEY_ADD msg for SA: SPI = 0xe007e1fd
vpn-6-602303: IPSEC: An inbound remote access SA (SPI= 0xC8ED80C2) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been created.
vpn-7-715077: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Pitcher: received KEY_UPDATE, spi 0xc8ed80c2
vpn-7-715080: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Starting P2 rekey timer: 3420 seconds.
vpn-5-713120: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, PHASE 2 COMPLETED (msgid=00000017)
vpn-7-713906: IKEQM_Active() Add L2TP classification rules: ip <76.17.XX.XX> mask <0xFFFFFFFF> port <4500>
vpn-7-715077: Pitcher: received KEY_SA_ACTIVE, spi 0xc8ed80c2
vpn-7-713906: KEY_SA_ACTIVE old rekey centry found with new spi 0xc8ed80c2
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, sending delete/delete with reason message
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing blank hash payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing IPSec delete payload
vpn-7-715046: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, constructing qm hash payload
vpn-7-713236: IP = 76.17.XX.XX, IKE_DECODE SENDING Message (msgid=d84b3b70) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 68
vpn-7-713906: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, Active unit activates new SA for remote peer 76.17.XX.XX.
vpn-7-715009: Group = DefaultRAGroup, Username = sam5510, IP = 76.17.XX.XX, IKE Deleting SA: Remote Proxy 76.17.XX.XX, Local Proxy 216.XX.XXX.XXX
vpn-6-602304: IPSEC: An outbound remote access SA (SPI= 0xFD65F940) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been deleted.
vpn-6-602304: IPSEC: An inbound remote access SA (SPI= 0xB2891595) between 216.XX.XXX.XXX and 76.17.XX.XX (user= sam5510) has been deleted.
vpn-7-715077: Pitcher: received key delete msg, spi 0xb2891595
vpn-4-713903: IKE Receiver: Runt ISAKMP packet discarded on Port 4500 from 76.17.XX.XX:4500

Videos on my macbook pro won't play sound after apple tv was installed in the house

Hi! Need some help... for christmas my dad received the little black Apple TV device to watch videos on our big tv from his iPad. After it was installed no sound came from my macbook, it instead comes out of the tv speakers. When dad is airplaying a video from his iPad and I open a video on my mac, the iPad video gets interrupted and the sound from my video comes on without the visual. What's going on?! I see the airplay symbol on the top right bar but it always says disconnected, yet obviously the sound is somehow connected.

that figures, VLC.
Consider getting your dad the APP VLC streamer for his Ipad, that way he can wifi beam movies etc. to his Ipad from any Mac.
removes putting movies on an Ipad and clogging it up with large movie files. Very handy

Keyboardmap messed up after new kernel was installed

Hey guys,
Was installing Arch the other day, and completed the installation of the base system.
Today I wanted to do the rest. I got to the point where I upgraded pacman and did a full system upgrade.
Got a new kernel, and according to the beginnersguide, after a kernel install, the pc will reboot or something like that.
It didn't reboot, so I issued the reboot command manually. The pc rebooted and when I wanted to log in, the keyboardlayout was messed up.
The keys had entirely different positions. R was P, O was R , T was Y.
Also, during the install of the basesystem with the livecd, wireless worked fine, but when I wanted to install stuff to the base system, wireless didn't work.
It could find the networks, but couldn't connect to them.
Flux

Hi.
I see that this post is starting to get old, so you probably figured out the solution, but here it is anyway...
I had this problem to, and after many hours of trying and failing, i finally figured out that the reason for this, is that the update also installs the keymap "dworak/no", and since dworak is listed before qwerty, it selects the dworak layout. You should be able to use "qwerty/no" in rc.conf to load the normal keyboard layout.
And btw, sorry for my bad english

Cannot remotely program DVR from browser and iPad, get "not responding" and "bad gateway"

Like others I've seen here, my remote DVR programming has disappeared, it used to work just fine from both the web and my iPad. I now get both "not responding" and "bad gateway" messages. I've tried everything I've seen suggested, including using the in-home agent for both "auto-fix common DVR issues" and "set top box auto correction", and rebooting the FiOS router. The self-diagnostics are all green, and it says that listener 1 is running. However, I still have the problems. From what I've read, there's a remapping process that can be run in the Verizon office that fixes the problem. Can this be done for me? Thanks!
Solved!
Go to Solution.

Hello Skiprules and Nubby122,
I have sent you both private messages so we can assist in getting the issue resolved.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

Cannot remotely access Ciscoworks page

Hi All,
When I try to access Ciscoworks remotely on a client PC, I don't even get to the login page. I only get a "Page cannot be displayed." Is there a way I can test why this happened? Back then I was able to access it remotely but now I cannot.
Appreciate your feedback. Thanks in advance.

Hi Joe,
I tried to test if port 1741 is open via "telnet 1741" on the command prompt of a remote laptop. The port seems to be open because a blinking cursor appeared and when you press Enter, you will get back to the command prompt. When I tried to access it on the internet explorer, a page cannot be displayed appears.
Any suggestions on what else can I check to verify Ciscoworks is working? Thanks in advance.

Cannot remotely access mac mini via Chicken of the VNC post recent updates

Hi, updated my remote mac mini A running OS X 10.4 with QuickTime 7.5 for Tiger and AirPort Utility 5.3.2 Tiger yesterday. I can connect from my mac mini B via ssh into the mac mini A, but for some reason Chicken of the VNC will not work (it was working prior to the updates). I get the following message "channel 3: open failed: connect failed: Connection refused" in the command window when I try to get access to the computer via Chicken of the VNC and Chicken of the VNC itself tells me that the connection is refused.
Any suggestions? How can I remove the AirPort Utility 5.3.2 Tiger which I assume is the culprit? Thanks
(mac mini A is miles away, the only access I have is via the command window)

Welcome to the forums, and thanks for the tip!

Visual Studio cannot remote debug Azure cloud service: There was a failure to launch the remote debugger

I am trying to invoke remote debugger on an Azure worker role cloud service, following the example of
http://msdn.microsoft.com/en-us/library/azure/ff683670.aspx
But on attaching the remote debugger for the cloud service instance
Microsoft Visual Studio
There was a failure to launch the remote debugger.
OK
According to somebody else's extra coverage on the topic, there are extra ports 4016/4017 that need to be taken care of (but do they have to be exposed externally)?
http://developers.de/blogs/damir_dobric/archive/2014/02/04/behind-windows-azure-remote-debugger.aspx
So servicedefinition.csdef gets
    <Endpoints>
      <InputEndpoint name="Endpoint1" protocol="http" port="80" />
      <InputEndpoint name="RemoteDebugger" protocol="tcp" port="4016" localPort="4016" />
      <InputEndpoint name="RemoteDebugger2" protocol="tcp" port="4017" localPort="4017" />
      <InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector" protocol="tcp" localPort="30398">
        <AllocatePublicPortFrom>
          <FixedPortRange min="30400" max="30424" />
        </AllocatePublicPortFrom>
      </InstanceInputEndpoint>
      <InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Forwarder" protocol="tcp" localPort="31398">
        <AllocatePublicPortFrom>
          <FixedPortRange min="31400" max="31424" />
        </AllocatePublicPortFrom>
      </InstanceInputEndpoint>
    </Endpoints>
Serviceconfiguration.cscfg gets
      <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Enabled" value="true" />
      <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Version" value="2.3" />
      <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ClientThumbprint" value="THUMBNAIL" />
      <Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ServerThumbprint" value="THUMBNAIL" />
    </ConfigurationSettings>
    <Certificates>
      <Certificate name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.TransportValidation" thumbprint="THUMBNAIL" thumbprintAlgorithm="sha1"
/>
    </Certificates>
But all these are to no avail; the same error still pops for Visual Studio 2013 Update 4; Azure SDK 2.3
Anybody regularly perform remote debugging for Azure cloud services?
The melody of logic will always play out the truth. ~ Narumi Ayumu, Spiral

And, how do I control that in Visual Studio?
All I get is the Attach Debugger... context menu option in the Azure cloud service nodes in Server Explorer. That is where it is failing. There are no customisable options.
Because of that, the Attach to Process dialog box is unable to retrieve the list of processes (to debug) in the remote worker role instance server.
I tested a blank-template worker role project and published to a new cloud project, and this simplistic copy had no problems with the Remote debugger.
Now the question is, what is it about this real-world project/cloud service that is different from blank sample? From what I compare between what I think are the relevant settings, there are none.
ServiceDefinition.csdef
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
<Import moduleName="RemoteDebuggerConnector" />
</Imports>
<Contents>
<Content destination=".\">
<SourceDirectory path="D:\Projects\experiments\workerrole1\workerrole1\rcf\Debug\RemoteDebuggerContent\" />
</Content>
</Contents>
<Endpoints>
<InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector" protocol="tcp" localPort="30398">
<AllocatePublicPortFrom>
<FixedPortRange min="30400" max="30424" />
</AllocatePublicPortFrom>
</InstanceInputEndpoint>
<InstanceInputEndpoint name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Forwarder" protocol="tcp" localPort="31398">
<AllocatePublicPortFrom>
<FixedPortRange min="31400" max="31424" />
</AllocatePublicPortFrom>
</InstanceInputEndpoint>
</Endpoints>
ServiceConfiguration.cscfg
<ConfigurationSettings>
<Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="DefaultEndpointsProtocol=https;AccountName=storage;AccountKey=" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountUsername" value="" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountEncryptedPassword" value="" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteAccess.AccountExpiration" value="2015-12-31T23:59:59.0000000+08:00" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteForwarder.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Enabled" value="true" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.Connector.Version" value="2.4" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ClientThumbprint" value="" />
<Setting name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.ServerThumbprint" value="" />
</ConfigurationSettings>
<Certificates>
<Certificate name="Microsoft.WindowsAzure.Plugins.RemoteAccess.PasswordEncryption" thumbprint="" thumbprintAlgorithm="sha1" />
<Certificate name="Microsoft.WindowsAzure.Plugins.RemoteDebugger.TransportValidation" thumbprint="" thumbprintAlgorithm="sha1" />
</Certificates>
The melody of logic will always play out the truth. ~ Narumi Ayumu, Spiral

Cannot remotely access DVR after second DVR was installed

Similar Messages

Maybe you are looking for