Cannot remotely program DVR from browser and iPad, get "not responding" and "bad gateway"

Like others I've seen here, my remote DVR programming has disappeared, it used to work just fine from both the web and my iPad. I now get both "not responding" and "bad gateway" messages. I've tried everything I've seen suggested, including using the in-home agent for both "auto-fix common DVR issues" and "set top box auto correction", and rebooting the FiOS router. The self-diagnostics are all green, and it says that listener 1 is running. However, I still have the problems. From what I've read, there's a remapping process that can be run in the Verizon office that fixes the problem. Can this be done for me? Thanks!
Solved!
Go to Solution.

Hello Skiprules and Nubby122,
I have sent you both private messages so we can assist in getting the issue resolved.
Mike_VZ
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

Similar Messages

HT1212 my ipad is not responding and 1/3 of the screen is white

my ipad is not responding and 1/3 of the screen is white.

Hi mandfrhi,
If your iPad isn't responding or won't start up correctly, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

When I do log and transfer in final cut pro 7 from external hard it will not responding, and i will force quit from final cut, plz help!!

When I do log and transfer in final cut pro 7 from external hard it will not responding,
and i will do force quit from final cut, plz help!!
i have alot work to do plllllllllz help

Hi. Your FCP7 question should be posted in this forum. https://discussions.apple.com/community/professional_applications/final_cut_stud io
Good luck.
Russ

My apple tv just updated to 6.0.1 .. now my iphones and ipad will not connect and airplay :( .. HELP

my apple tv just updated to 6.0.1 .. now my iphones and ipad will not connect and airplay .. HELP

Troubleshooting AirPlay

My ipad will not respond, and when i try to shut it down it won't what can I do?

All of a suuden my ipad would not respond to taps, or any manipulation. When I tried to shut it down, the swipe for shut down would not respond. any ideas? what might be problem ? and what can/should I do? Thanks

First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
You won't have to swipe anything on the screen to reboot the iPad. Hopefully this will correct the error.

Airport extreme will connect to some iPhones and iPads, but not all, and will not connect to MacBooks.

Why will the airport extreme not connect internet to macbook or some iPhones? It will connect to all our iPhone 6's and iPads but not to the MacBooks. The macbook says wi-fi has the self assigned ip address of ___,____,____,___ and will not be able to connect to the internet,

Have you done a full restart of the network in correct order?
Shut down everything.. OFF not standby.
Power on in order.
Modem.. wait 2min
Router.. (Extreme??) wait 2min
Macbook.. Only the Macbook.. do restart anything else yet.
Any luck??
No luck reset the Extreme to factory and redo the setup.. this time use all short names, no spaces and pure alphanumeric. Bonus for names <10 characters.
Use passwords with the same rules.. only can be 8-20 characters.. mixed case and numbers.
Try again with the Macbook..
No luck give explicit details of the setup of the whole network.

Opened the pop up password recovery window and it said not responding and when started responding all my passwords from the laptop and desktop were gone

I opened the options>>security>>saved passwords pop up and clicked on show passwords and it said *not responding* for a bit and when it started responding my 100+ passwords and user names were all gone and the window was totally clear....any idea how to recover all those passwords?

You need a backup copy or previous versions of the key3.db and signons.sqlite files to restore the passwords stored via the Password Manager.
*http://windows.microsoft.com/en-US/windows-vista/Previous-versions-of-files-frequently-asked-questions
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Hii everyone,I am using mac os 10.8.3 and its getting not responding every time.

Hii guys ,I am using ma os 10.8.3 and my finder is getting not responding all the time ,I can hardly use the finder for 2 min and it gets jammed.after a few days vlc player,then safari and its continuing .Now i even cant open the Launch pad and the applications are not even visible to me..
I tried all the possibilities like Pram set ,repairing the disks and every sort of process i know .so please help me out with it

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Why does mozilla firefox just randomly stop working in the middle of e-mail, games. reading articles or surfing. I get not responding and am getting very iritated

As I am doing things on any site and very randomly everything stops and I get the message that mozilla firefox is not responding and I have to wait up to a full minute before it starts again

-> [[Firefox hangs]]
* http://kb.mozillazine.org/Firefox_hangs
Check and tell if its working.

TS4036 my ipad will not respond and can't be backed up at this time. help!!

My iPad is stuck on a screen telling me that I haven't backed up in 2 weeks. I can not get my iPad to respond in any way. I can't get it to shut down or move beyond this screen. Please help.

Perform a reset: Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. Release both buttons and await restart.

After trying a software update it froze midway and is now not responding and not being recognised by itunes. Help!!

Hi
My 3rd Gen Ipod Touch was undergoing a software update when it stopped and itunes threw up a message saying "Update cannot be completed due to an unknown error". I disconnected and reconnected the ipod, and itunes suggested I restore the ipod. I started the restore and it froze midway and again said "Cannot be completed due to unknown error". The ipod is now frozen with the apple logo and an empty progress bar. It is not responding to anything. Windows is recognising it by opening Itunes but Itunes is not showing the divice in the pane. I dont know what to do! Please help!

See Here for Device Frozen
http://support.apple.com/kb/ts1445
Device Not Recognised
For Mac
http://support.apple.com/kb/ts1591
For PC
http://support.apple.com/kb/TS1538
And Here for further help:
DFU Mode
Open iTunes and Connect the iPhone to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I updated my ipad 2 from 4.3.3 to 5.1.1 and unable to do so. now, the ipad is not responding and indicates no capacity, software and serial number. As such, unable to restore device. Any advice/assistance will be appreciated.

I updated my ipad 2 OS4.3.3 to 5.1.1 recently. Unfortunately, was not able to restore the device. I seem to have lost the ipad's info like: Name, Capacity, Serial Number and Software Version in the process. Despite repeated attempts, the device displays error messages to account for not being able to update and restore the same. Any advice/assistance will be much appreciated.

Try DFU mode (Google is your friend, here is a link to one way:
http://www.iclarified.com/entry/index.php?enid=1034)
If that does not restore your iPad, contact Apple or your local
Apple Authorized Service Provider.
Your iPad wasn't jailbroken previous to the upgrade, was it?
Jailbreaking can cause instability and other problems with
upgrades.

My yahoo account was hacked and ipad does not respond

My yahoo account was hacked and cannot get my ipad to accept my account again and new password

The money was stolen off of gift cards stored on my itunes account, and I did close the card on the account. I have changed my infortiona security wide but kept the rest of the changes they made to my account as proof. It has indeed been 48 hours since I conta cted them, and still no response. Also on this forum others have reported the same thing happening. Very sad I cannot even call Itunes about this. Thanks for your response.

Remote programming DVR

Verizon needs to reestablish the ability to remotely program DVR from a PC. I was told by tech support that people did not know how to use it and that is why is was eliminated. I have a hard time believing that is true. Why has Verizon moved backwards with technology?

Tmac1 wrote:
well i don't know if Verizon eliminated programming the DVR from a PC, but i know that every time i try to enter myDvr on my pc like i used to do it before i can't. then something is wrong. They should fix this because when i don't find myself home i use my laptop to setup my dvr but right now i can't do it
I agree, something is wrong.
I can assure you Verizon has not eliminated programming the DVR from the PC. While I don't do it regularly, I do check from time to time and it pretty much always works (there are occasional times when it doesn't, I don't know if it is network or server maintenance or what, but if I wait a few hours it seems to always work the next time). I again just went in and scheduled a program just to be sure it is still working, worked just fine.
I think you need to contact tech support and get them to take a look, I think it is something unique to your account or configuration.
Justin
FiOS TV, Internet, and phone user
QIP7232, IMG 1.8, Build 02.54
Keller, TX 76248

My Ipad Screen got struck and Ipad is not working .On using updated IOS 7

My Ipad Screen got struck and Ipad is not working and not allowing to shutdown also.
Only SIRI is working. and that also not able to open any app. Today Morning I updated IOS 7. It was working fine for a while. WHen I tried to Minimize one of the app using fingers by multi touch it got struct. Now neither app closed completely not screen is moving. Just got struck.
Please check regarding this issue and provide me solution

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Cannot remotely program DVR from browser and iPad, get "not responding" and "bad gateway"

Similar Messages

Maybe you are looking for