Cannot remove "Network Device" with Easylink Advisor

Hi,
I have a device that i cannot remove. When I click on the tab for options I see "Details", "Rename", and "Track as Intruder" but not "Remove". I have the option to "Remove" from my acknowledged devices but not this one. This is on a PC with XP running Advisor version 3.11.
Any suggestions?
Thanks.

Easylink Advisor does not have the option to "Remove".
You can try uninstall and re-installing the software once.

Similar Messages

Discovering Network Devices with SNMP not working

I have implemented SCOM 2012 SP1 CU5 on Server 2008 R2 with SQL 2008 R2 all installed on the same VM running side by side with SCOM 2007 R2 v 6.1.7221.0. I have almost fully decommissioned SCOM 2007 and all that remains on it is 2 network devices that
I cannot discover with SCOM 2012 using SNMP, no matter what I try. If I just use ICMP the discovery works. I have checked both the devices and SNMP is enabled and if I run this snmpwalk command on both devices I get a response;
c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.XX -v:1 -c:"public" -os:.1.3.6.1.
2.1.1 -op:.1.3.6.1.2.1.2
SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=NetMan 100 plus
OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.5491.6
OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=5 days, 1:58:58.04
OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=SystemsEngineer
OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=MARMUPS
OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=0
Total: 7
c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.1 -v:1 -c:"scom05" -os:.1.3.6.1.2.1
.1 -op:.1.3.6.1.2.1.2
SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=SSG-140 version 6.3.0r2.0 (SN: 0
185112006000325, Firewall+VPN)
OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.3224.1.52
OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=359 days, 2:20:16.00
OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=Network
OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=XXXXXX
OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=72
Total: 7
The first device is a Marms UPS which has had its firmware upgraded, which was discovered using SNMP in SCOM 2007 and the second device is a Juniper SSG-140 Firewall, again this is discovered using SNMP in SCOM 2007.
I believe that I have setup SNMP correctly on SCOM 2012 because I have 28 other networks devices discovered using SNMP using an explicit discovery, some of these being newer Marms UPS's, emerson air conditioners, netapp SAN etc.
I have added any and all accepted community names in the SNMP service properties on SCOM 2012 and enabled accept SNMP packets from any host.
Does anyone have any information that they could forward to me or point in the right direction to troubleshoot this issue for eg run some snmp get commands and capture / filter traffic with wireshark, what do I look for? Any other logs to check besides the
obvious ones? Any known issues with SCOM 2012 SP1 and SNMP, should I upgrade to R2? It just seems that some network devices get discovered with ease and others do not and I am running out of ideas. Thank you all in advance.

Patrick, thank you for your reply.
Yes the snmpwalk command is run from the new SCOM 2012 server which has the discovery rule on it.
I don't have any pending network devices, its blank.
Could there be an issue with my discovery rule? I have noticed that each time I make a change to, for eg, the access mode and change this from ICMP to ICMP/SNMP, save it, run it, it doesn't seem to update the said network devices access mode's in network
devices, it just stays on ICMP. Do I have to manually remove the network devices which have been discovered before making any changes to the discovery rule and running it which I have done? They don't seem to appear in network devices pending management either?

Help with EasyLink Advisor for WRT54GS

Ok when I try and bring up the EasyLink Advisor for my router it says Administrator Privileges Required then under that it says You must be logged on as a user with administrator privileges to modify the computer's configuration for home networking. The thing is though that I am logged in as the administrator. I have never had this message appear before. I have gotten on the EasyLink Advisor numerous times to find the IP Address and stuff so I can connect my Xbox, iPod Touch wifi, and stuff like that. But now it won't let me do anything. I used to have Windows Vista on my computer but then I upgraded to Windows 7 and I think this is the problem because it started happening after I upgraded. Help!
Solved!
Go to Solution.

Yes the Easy Link Advisor is not supported on Win 7. You don't need it anyway. Simply connect to 192.168.1.1 with user name blank, password admin and check all status from the router itself.

Cannot Remove ActiveSync Device

Hi All,
some days ago I saw an ActiveSync device which user claims that it does not belong to him, so for security concerns I removed that device from ECP using Admin account. But automatically after few seconds it reappears, and it happened 8 to 10 times, I remove
it and it reappears. Now this device is stuck there, when I remove it from ECP with Admin Account, it gives error with big device ID 0823450458 does not exist. same result with Remove-ActiveSyncDevice cmdlet. And also it doesnt shown in ADSIEDIT Users ActiveSyncDevices
Container. I have to remove this entry what should I do please suggest
Virgo

Thanks for the reply, its just happening with this particular device only, I can remove the other devices of the same user, but only this one is stuck. Remove-ActiveSyncDevice is also giving the same error "cannot find the deviceID"...
Virgo

Windows Server R2 stop working. Cannot map network drive with my Win 7 client.

Hi to everyone.
I had a problem for quite some time time and even i tried to solved it till now unfortunately seems unreachable.
I have a 2008 R2 server which is used as SQL 2005 server. My application program shared from the server. My win 7 client use a map network drive to access my share folder from my windows server. Suddenly my clients lost my connection. Since then i
cannot connect to the folder and i got the message
Windows cannot access \\Server\Storage
Check the spelling of the name. Otherwise there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
Details: Error code: 0x80070035 The network path was not found.
I check out my share permissions, all seems ok. I also check out firewall, services, TCP/IP, share folders, really almost everything but still nothing.
Does anyone have any idea how to resolve the problem.

Yes what seems to happened is due to virus infections.
This problem started 2 weeks a go. First i had network connection error with my client. Them my application had respond errors. Finally i lost my network drive.
I realize that the problem was due to virus. My old antivirus program doesn't s scan any threats so i uninstalled it, and i installed Panta antivirus and i clean up my server and my clients from virus. I am sure that both are clean from virus. My antivirus
program runs every day with no traces of infections.
Since then i cannot see my share folders on my server side and i cannot map network drive.
One thing that i want to avoid is re-installation of windows server 2008 R2.
Can anyone help about this
Thanks

EA6500 has numerous "network devices" with no MAC

I have noticed from time to time I get many (15-20) "network devices" in the Device List with no MAC address. I notice this mainly when managing Parental Controls. I go and clean up the Device List and days later they reappear.
Another interesting thing is that the computer I am writing this with (through the router) does not show up in the Device List and I have an IP address from the router.
I have the latest firmware 1.1.28.146856.
Does anyone else see this on their EA6500?

There are a lot of people who reported similar or related cases that you have right now. From what I have read, they reset their routers back to factory settings. There is one who got to a work around by adding all of his devices to the DHCP Reservation List and the router is working fine after that.

Remove network device inventory from SCOM database

Hello Gurus
I have a quick question. I think one of the internal connectors in my SCOM environment has got deleted by mistake. As a result all the network devices that were being monitored previously has now disappeared. I believe because they were present in the database,
I can't discover them now. Is it possible somehow to list those network devices from the database, and then delete them, by using powershell and/or SQL.
Any help in this regard will be greatly appreciated.
Regards,

You can delete them by:
In the Discovery Rules option under the Administration Tab, you will be able to see all the network devices that are discovered. This shows the devices that are discovered and currently getting monitored in SCOM. You can select multiple devices and then
remove them.
Then Run in powershell Get-RemotelyManagedDevice to check that all Network devices deleted.
you can also check below link to remove/restore network device
http://technet.microsoft.com/en-us/library/hh212795.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

How to remove network devices through powershell? (scom 2012)

Hi
Could anyone says how to delete network device in SCOM 2012 through powershell?
In 2007 we have Get-RemotelyManagedDevice.
I have a big number network device in monitoring and now need delete some of them with specific filter, all switches.
How to do it?
Thanks
Alex

The devices were discovered by an old Management Server that was reinstalled.
I finally got those devices out of my SCOM environment using this SQL query (just replace networkdevicename):
UPDATE
BaseManagedEntity
SET
isdeleted=1
from
BaseManagedEntity where
BaseManagedEntityId in
(select
BaseManagedEntityId from
BaseManagedEntity where
displayname like
'%networkdevicename%')

I have a BT internet pop account and have been told this cannot sync across devices with iCloud. Is this true?

I have a BT internet pop account and have been told this cannot sync across devices using icloud. Is this true and are there ways round it?

That's correct. iCloud handles only its own email, and has no relationship with other accounts. It's in the nature of a POP service that messages are downloaded from the server to the machine - it was really designed for single-computer use in the days when a second computer was an unheard-of luxury. You can usually set the email client to leave message on the server either permanently or for a specified period, so that other devices can also access the messages, but of course they won't see replies or sent messages.
IMAP (which is what iCloud uses) is the better protocol to use - the messages live on the server and the various computers and devices read them from there, like webmail - and a service which provides that will behave in exactly the same way as iCloud but independently of it. You should ask BT if they can provide an IMAP version of the account - some ISPs provide both, some don't.

Replaced network device with same ip - cannot access ssh/http

Hello-
I replaced a network equalizer and used the same ip.
<www> - <firewall> -<netequalizer>-<cisco core>-<lan>
I can see this online and we are passing traffic. Yet cannot access ssh or http. I have been troubleshooting with netequalizer but figure i come here. I am thinking this may be an arp issue on the cisco core? Any thoughts?
thanks

While it might be possible that it is an arp issue on the core I think it is not so likely. Can the core ping the netequalizer? If the core can ping then it almost certainly is not an issue with arp.
My guess is that there was something in the configuration of the previous netequalizer then enables management by SSH and HTTP that was not done in the configuration of the replacement.
HTH
Rick

Cannot remove bluetooth devices in iOS 8

In bluetooth settings, I am trying to remove a bluetooth device using iOS 8 on an iPhone 5; however, when I select the device, "Forget This Device" is greyed out and unavailable. I have done some searching and found that this can happen with jailbroken phones, but mine is not jailbroken. I now have two devices that are in my iPhone bluetooth settings that have this issue: my iMac and my iPad.
Anyone else seeing this or knows of a fix?

I just found a solution that worked for me by disabling Handoff in both my iMac and my iPhone.
For OSX:
System Preferences → General and scroll down. Uncheck Allow Handoff between this Mac and iCloud devices
In iOS:
Go to Settings → General, scroll down and turn off the switch for Enable Handoff
I was then able to select forget for the desired bluetooth devices, and then switch Handoff back on.

A way to use G network devices with 5ghz 'N' network devices?

Hi guys,
I recently setup my new Airport Extreme in 5ghz 'N" mode - it shares a hard drive with all my Macs, and it streams large movies (some HD) to Macs, and to my Apple TV. I love the pure 5ghz N mode for its speed - it enables me to get the same internet speed result tests on my MBP from my 24meg ADSL connection i got when wired directly to the modem (the wireless G modem the company sent out halfed the speed i could get via a wired connection!)
Anyway, of course the down side to this is no 'G' network clients cna join the 'N' network, which means my old 2.5ghz G5 is too outdated, our iPhones dont support it and i cant share the printer with my newer macs wirelessly with my 'G' only Airport Express.
So my iPhone could connect to the net i left the wireless router my broadband supplier sent me in G mode - and it connects to my Airport Extreme very simply via ethernet.
Of couse this doesn't solve My G5, allow my iPhone to work as a remote for Macbook/Apple TV or share my printer...is there anyway possible with my airport express to set up a wireless 'G' network which can somehow "talk" to the 'N' network if i wire them together via ethernet?
Id imagine this is a long shot with regards to Apple remote functionality but i dont want to lose the pure 'N' speed i need, and i would like to use apple remote and obvioulsy be able to print to my printer without having to disconnect the N network and join the G network.
So anyway in bridge mode the airport express can talk to the airport extreme and run two seperate speed wifi networks?

So anyway in bridge mode the airport express can talk to the airport extreme and run two seperate speed wifi networks?
Yes, this is known as a "Dual Band" network.
Setting up a "dual band" network is described in the Designing AirPort Networks document, starting on page 48.

SQL Server 2008 R2 - Cannot remove 50th instance with command line uninstall

I have reached the 50 instance SQL Server limit on my Microsoft Server 2008. I have tried to remove an existing instance using the command line below but it still is reporting that "No more transforms are available because the maximum 50 has been
reached." and the uninstall is hanging on Select Features. Some of the instances on this server are for SQL Server 2008 and some are for R2. Where do I go from here?
"C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\setup.exe" /Action=Uninstall /FEATURES=SQL /INSTANCENAME=myinstance

"C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\setup.exe" /Action=Uninstall
/FEATURES=SQL /INSTANCENAME=myinstance /Q
Try this..
/Q = Quite Mode..
Chetan ================================================================== ================================================================ This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to
click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Cannot obtain network connection with Clear modem. Is there a special trick to get beyond the blinking amber light?

My connection follows this chain:
Clear modem to telephone router
telephone router to network router (in this case I am attempting to set up the AirPort Express in this place).
so I have opened up the Airport Utility and didn't have any luck with getting the Network Connection to turn green and subsequently the AirPort Express is not completing the handshake with the network to get fully connected.
I've gone back to a Netgear router in the meantime and that gets the conection right away. I have only Mac computers connecting to the router and one Epson printer that will connect wirelessly.
Any advice or experiences with this setup would be appreciated. Thanks.

I got the support I needed directly from Apple. It turnsout to have had zero to do with Clear. I had named the new AirPort network the same as the previous network and we concluded that it was making the new settings confused. I did a hard reset, renamed the network to a completely unique name and we were off and running. Thanks Apple!

Cannot get capture device with CaptureDeviceManager.getDeviceList(null)

Hi friends, I am facing the problem and I still don't know how to solve the problem.
I try to get microphone for cpture audio but it not work.
My java code is
Vector captureList = CaptureDeviceManager.getDeviceList(null);
System.out.println("Number of Capture Devices Found: " +captureList.size());
The result is
Number of Capture Devices Found: 0
but I have tried with javax.sound for get microphone it work.
AudioFormat audioFormat = getAudioFormat();
DataLine.Info dataLineInfo = new DataLine.Info(TargetDataLine.class, audioFormat);
TargetDataLine targetDataLine = (TargetDataLine)AudioSystem.getLine(dataLineInfo);
If anybody knows how to solve this problem, please help me.
Thank you very much.
Regards,
TheX

Hi friends, I am facing the problem and I still don't know how to solve the problem.
I try to get microphone for cpture audio but it not work.
My java code is
Vector captureList = CaptureDeviceManager.getDeviceList(null);
System.out.println("Number of Capture Devices Found: " +captureList.size());
The result is
Number of Capture Devices Found: 01- Check your classpath, whether it contains JMF path or not.
2- Check whether JMF is installed correctly or not i.e. are you able to capture using JMStudio? and does JMStudio lists your capture devices?
3- If you are using a jar in Vista, then there is almost NO solution, you will always get 0, check the following threads:
[http://forums.sun.com/thread.jspa?threadID=5340752]
[http://forums.sun.com/thread.jspa?threadID=5340810]
Thanks!

Cannot remove "Network Device" with Easylink Advisor

Similar Messages

Maybe you are looking for