Cannot remove SMTP Channel Scom 2007 R2

Since my SCOM 2007 machine stopped sending notification mails i try to delete the smpt channels and recreate them.
Now when i try to remove them i get the next error message:
Note:  The following information was gathered when the operation was attempted.  The information may appear cryptic but provides context for the error.  The application will continue to run.
Microsoft.EnterpriseManagement.Common.UnknownServiceException: The service threw an unknown exception. See inner exception for details. ---> System.ServiceModel.FaultException: The creator of this fault did not specify a Reason.
Server stack trace: 
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]: 
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.ITypeSpaceDataAccess.DeleteNotificationAction(String name)
   at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.DeleteNotificationAction(String name)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.DeleteNotificationAction(String name)
   at Microsoft.EnterpriseManagement.ManagementGroup.DeleteNotificationAction(NotificationAction notificationAction)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.Views.NotificationChannelsView.RemoveNotificationChannel(NotificationAction action, NotificationEndpoint endpoint)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.Views.NotificationChannelsView.Delete()
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.Views.NotificationChannelsView.DeleteAndCatchKnownExceptions(Object sender, ConsoleJobEventArgs e)
System.ServiceModel.FaultException: The creator of this fault did not specify a Reason.
Server stack trace: 
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]: 
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.ITypeSpaceDataAccess.DeleteNotificationAction(String name)
   at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.DeleteNotificationAction(String name)
Does anyone know how to resolve this?

Thanks for your message...
I have created a new smtp channel and tried to test it with the notification test tool.
I don't get mail and in my event viewer i get the next warning in the application log:
Connection with the Operations Manager Root Management Server failed.
Error: A Management Pack in the Management Group has been added, upgraded, overridden, or deleted.  A reconnection will be needed to detect the changes.
Number of occurrence: 1
Retrying in 30 seconds...
I have checked my management server in the administration console which says it is healthy and seems working correctly
Regards,
Gerard

Similar Messages

  • SCOM 2007 R2 Removal

    Hi Guys,
    Looking for an advice, if there is any procedure to do SCOM 2007 R2 decommissioning, it is updated with Cu5
    Thanks,
    - Thanks, Varshinie

    If you are looking to decommission the whole SCOM 2007 R2 environment (ie remove everything) then there is no need to remove the CU .. below assumes that there is only one SCOM environment and you want to purge it from your organisation:
    1) Uninstall all agents.
    2) Uninstall all core components (MS, RMS, Reporting). Potentially decommission the servers if they were dedicated to SCOM
    3) If you are looking to reinstall at some time or want to use the SQL Servers for something else then delete the databases and logins for the SCOM service accounts
    4) Disable the SCOM service accounts. You can delete them but I'd prefer to disable them in the first instance in case they have been reused elsewhere. If something breaks then you can just re-enable the account
    5) If you have deployed the AD Management Pack then delete the OpsMgrLatencyMonitors container
    6) If you used AD Integration then remove the container that this creates from AD
    7) If you have configured excchange to relay messages from the Management Server then you can remove this configuration in Exchange
    8) Network devices that have been configured to use SCOM can be reconfigured (security removed) to clean up the ACLs
    9) Ideally, if you have created Run As Accounts for specific applications e.g. SQL then you might need to remove these from the applications themselves e.g. remove the SQL logins used for SQL monitoring
    Cheers
    Graham
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • Error:Cannot remove element with nonexisting ID

    Hi all, I am following this wiki to add custom fields to family info page: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/17/enhanceStandardESSPersonalInformationUIwithout+modification&
    when I added the custom fields and clicked Ok, I got this error below:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: View: Cannot remove element with nonexisting ID "_CustomExtensionLabel_bizcard_5f_1_23_InfotypeList_2e_Zzareacode" of type com.sap.tc.webdynpro.clientserver.uielib.standard.impl.Label
    I saw a few messages with this error, but no solutions.
    Any help?
    thanks, Rohit

    Hello Rohit,
    the personalization is not the correct way of adding the custom fields in the Portal. You would
    have to add the custom fields from NWDS (Netweaver Development Studio)
    You can find a document in SDN  through which you would be able to add the field in the Portal.
    Web dynpro personalization is for hiding the fields, changing labels, and lots more.
    If you are looking to change overview screen that can be personalized with table V_T7XSSPERBIZFLC. If you cannot see any standard field in overview screen, as per the customizing in mentioned table.
    Best Regards,
    Deepak..

  • SCOM 2007 server decommission

    Hi All,
    We have built new scom 2012 server so we have to uninstall all SCOM 2007 components . Please help me how to remove the SCOM 2007 RMS, MS , Reporting service and DB and DW. Also please tel me what are things
    i need to do before uninstallation of SCOM 2007

    1) Uninstall all agents.
    2) Uninstall all core components (MS, RMS, Reporting). Potentially decommission the servers if they were dedicated to SCOM.
    3) If you are looking to reinstall at some time or want to use the SQL Servers for something else then delete the databases and logins for the SCOM service accounts
    4) Disable the SCOM service accounts. You can delete them but I'd prefer to disable them in the first instance in case they have been reused elsewhere. If something breaks then you can just re-enable the account
    5) If you have deployed the AD Management Pack then delete the OpsMgrLatencyMonitors container
    6) If you used AD Integration then remove the container that this creates from AD
    7) If you have configured exchange to relay messages from the Management Server then you can remove this configuration in Exchange
    8) Network devices that have been configured to use SCOM can be reconfigured (security removed) to clean up the ACLs
    9) Ideally, if you have created Run As Accounts for specific applications e.g. SQL then you might need to remove these from the applications themselves e.g. remove the SQL logins used for SQL monitoring
    Roger

  • Update agent from SCoM 2007 to SCOM 2012

    Expets,
    We have SCOM 2007 R2 CU7on 1 server.
    we installed another single SCOM 2012 r2 on another server.
    when i push the agent from the SCOM 2012 to machine still monitored by SCOM 2007, the machine appear in pending management under device management under  setting
    tab
    but when i remove the SCOM 2007 manualy, there is no problem and the installing of SCOM 2012 agent done successfully
    any way to make SCOM 2012 agent automatically without remove SCOM 2007 agent ?
    Ahmad Samir | MCSE 2003 | MCTS: Exchange 2010, MCTS: Lync 2010. MCTS: SCOM 2007

    Hi,
    If SCOM 2012 and SCOM 2007 R2 belong to the same management group, then you are trying to make your agents multi-homing, and if so, just discovery them and push agent to them should work.
    Here is a similar thread, please go through it:
    http://social.technet.microsoft.com/Forums/en-US/c6d15d7f-1779-47ea-a437-bc6ab00e2f64/upgrading-scom-2007-r2-to-scom-2012?forum=operationsmanagergeneral
    And we may need to logon to one agent and check its event viwer for operation manager log for more details.
    Regards,
    Yan Li
    Regards, Yan Li

  • SCOM 2007 R2 to SCOM 2012 SP1 upgrade issues.

    We have SCOM 2007 R2 on one of our development Environment.
    The plan was to upgrade to SCOM 2012 R2 so we installed the SCOM 2007 R2 CU5.
    We are having issues to upgrade now from SCOM 2007 R2 CU5 to SCOM 2012 SP1.
    While upgrading we received the below message:
    Unable to Proceed
    Setup is unable to proceed with installation for the following reason:
    At least  one of the following application is  installed on the computer.Due to incompatibility with system center 2012 - operations manager,these applications must be uninstalled.
    -System Center 2012 - operations manager beta
    -system center operations manager 2007
    -system center operations manager 2007 sp1
    --system center operations manager 2007 r2
    -system center service manager agent
    --system center essentials agent

    Hi,
    You cannot upgrade from SCOM2007R2 to SCOM2012SP1, you must upgrade to SCOM2012 and the upgrade to SCOM2012SP1
    Cameron Fuller has a blog:
    http://blogs.catapultsystems.com/cfuller/archive/2013/02/11/can-you-upgrade-from-opsmgr-2007-r2-to-opsmgr-2012-sp1-scom-sysctr.aspx
    Upgrading System Center 2012 – Operations Manager to System Center 2012 SP1
    http://technet.microsoft.com/en-us/library/jj899854.aspx
    "The only supported upgrade path to System Center 2012 Service Pack 1 (SP1), Operations Manager is from System Center 2012 – Operations Manager. If you are upgrading from System Center Operations Manager 2007 R2, you must first upgrade to System Center 2012
    – Operations Manager"
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SCOM 2007 - OPerations console only for exchange servers.

    HI All,
    There is s requirement in my organisation where-in we have to create monitoring /operations console , only for exchange servers is that possible? If yes, can some share the information on the same also, this needs to be done in SCOM 2007 R2.
    Rgs,

    Hi Naren,
    If your organisation does not have any restrictions in providing the Administration acces, Then i would sugges you import the Exchange 2010 / 2013 management packs.
    Download link: http://www.microsoft.com/en-in/download/details.aspx?id=692
    http://www.microsoft.com/en-in/download/details.aspx?id=39039 ( Exchange 2013 M's not compatible with SCOM 2007 R2 as per my understanding)
    Post importing,
    Go to the operations console and SCOPE the objects only to Exchange 2010 Monitoring target, So that the console will only display you the Exchange 2010 management pack alerts.
    Once in a while remove the SCOPE and clear the other alerts as well and then re scope it back.
    Or if you are only monitoring Exchange 2010 then no need to SCOPE at all as there will be no other management packs to throw alerts in SCOM console.
    If security is your concern then Make a normal operator account like the below and tell them to SCOPE the objects to Exchange 2010 or give them access to the Web console where the administration tab will be unavailable at all times.
    Security scope: Make them a member of This group for limited / only monitoring access:
    I Admin access is necessary, Then make them a member of Operationsmanager Admins on the 1st group of the screenshot.
    Gautam.75801

  • Removing Aux Channels in the mixer

    Hello people, does any body know about this? I´m trying to delete an Aux Channel in the mixer that I don´t need anymore, I have checked the manual, etc and i cannot believe you cannot remove a Aux channel ... I mean it should let you arrange your mixer the way you want ... Thanks in advance for the help.

    Hmm... As soon as I select an Aux track in the mixer, and then hit the "Delete" button, I'm given a prompt telling me that I'm about delete objects that are assigned to tracks in the Arrange Window.... Do I want to "Cancel", "Delete Anyway", or "Delete Used and Continue".
    So I absolutely can delete an Aux track from the Mixer window, even one in use.
    How are you trying to delete it?

  • SCOM 2007 extest_ user mailbox maintenance/management.

    I use SCOM 2007 to monitor our Exchange 2010 environment.  I use the test-* commands in powershells on my desktop to catch anything that may occur between SCOM alert thresholds.  Several of these use the extest_ account.  
    Today, I looked at the extest_ user mailbox and found that the tests are accumulating in the mailbox.  What do I need to configure so the tests are purged from the mailbox, including the deleted items folder?  
    Information, links, and comments are all welcome.  
    TIA.  

    Hi,
    Do you mean that there are many test mailbox and you want to remove them? As far as I know,  those account is used for synthetic transaction tests for the Exchange. Those synthetic transactions will perform several tests on your Exchange infrastructure
    and warn you if there is a problem with your mail flow. In order to perform such tests the requirement is to have specific users with mailboxes created.  Those users is created by script named New-TestCasConnectivityUser.ps1.
    Each site will have a test account, please refer to the below link for more details:
    http://stefanroth.net/2013/02/09/scom-exchange-2010-mp-extest_-user/
    From my point of view, we can remove those account, but then the script can create them again.
    If you don't create a test mailbox on one or more Mailbox servers, the Management Pack will return the following warning: “The test mailbox was not initialized. Run new-TestCasConnectivityUser.ps1 to ensure that the test mailbox is created.”
    More details:
    http://technet.microsoft.com/en-us/library/ee758052(v=exchg.140).aspx
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • SQL 2012 DB Engine [Login failed: Account locked out] alerts not received from SCOM 2007 R2

    Dear Experts,
    In our SCOM 2007 R2 environment SQL 2012 DB Engine [Login failed: Account locked out] alerts not received but we are receiving the following alerts fr the DB instance.
    1. Database Backup Failed To Complete
    2. Login failed: Password expired
    3. Log Backup Failed to Complete
    4. Login failed: Password cannot be used at this time
    5. Login failed: Password must be changed
    6. IS Package Failed.
    Why we are not receiving the "Login failed: Account locked out" ? Customers are asking the notification email alert for this Rule even I have checked the override settings everything is enabled by default same as above rules.
    What can be the issue here ?
    Thanks,
    Saravana
    Saravana Raja

    Hi,
    Could you please check the Windows security log for (MSSQLSERVER) event ID 18486? The rule should rely on this event.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Share Point 2013 MP for SCOM 2007 R2 - Not Monitored State

    Hi All,
    I have imported SharePoint 2013 MP in SCOM 2007 R2 and the sharepoint farm group is in "not monitored" state, moreover only one computer name out of all sharepoint farm servers is being populated in unidentified machines (rest are not being
    shown anywhere in Microsoft SharePoint folder).
    I have followed all the steps as per installation guide of sharepoint 2013 (foundation & Server) MP. Configured run as account has the farm admin rights.
    Please help as it seems discovery is not working properly.
    Regards,
    Prabh.

    Hi,
    Hope the below blog be helpful:
    Configuring the SharePoint 2013 Management Pack
    http://blogs.technet.com/b/kevinholman/archive/2013/05/14/configuring-the-sharepoint-2013-management-pack.aspx
    Please go through it.
    Regards,
    Yan Li
    Regards, Yan Li

  • Downloaded Firefox 4--computer asks over and over to restart, Firefox will not load, cannot remove it!!

    I received an update message after my system had installed the newest Firefox 3. something, approximately 4 days ago. (Today is 3/22, so about 3/17--18) The newest update , when started, took me to the Mozilla homepage, where It was suggested I download and comment on the new Firefox 4---I do not normally do this, but am so impressed with Firefox versus most others, that I did, now, I cannot open Firefox at all, the older version, 3. something, is not in my system, only 4, but my system/PC upon trying to open the new Firefox, prompts me over and over to restart the system, (which I have done 3 times) I figured I would then simply remove it, (Firefox 4) and either try it again, or re-install the newest 3. something---I cannot remove it, even using my anti-virus program to do so, it simply prompts over and over to restart, wether I try to open, remove, or access it in any way---I do not wish to use system restore, but that seems my only option, please help!!!

    I had the same problem and the solution is quite simple:
    - delete all data that has to do with Firefox and Mozilla
    - Reinstall the new version Firefox 4
    You have to make sure that everything is deleted and well yes you will lose your profile data but at least it works again without any problem.

  • How do I remove an old phone number from my macbook imessage. My apple ID does not show the number anymore but I cannot remove it from the imessage accounts. Its driving me mad !

    Can someone please help me to remove an iphone telephone number from my imessage application. I no longer have a phone which I registered on my apple ID as a second phone. I have been on my apple ID and it does not seem to be there but cannot remove it from imessage, which still has it as an option to connect to. I am concerned that someone else who inherite this old phone will see my messages if I accidentally enable it again. I have read and re-read various postings and tried all options given but no luck, the **** thing stays there.....

    Hey Chappers64!
    Here is an article that will help you with this issue:
    iOS: Deactivating iMessage
    http://support.apple.com/kb/ts5185
    If you have already tried these steps, you will want to utilize the information at the end of the article:
    If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support.
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Can overrides from SCOM 2007 R2 be used in a new SCOM 2012 R2 installation?

    Hi All,
    I'm wondering if we can "easily" use our overrides/configuration from our current SCOM 2007 R2 implementation and use them in a new SCOM
    2012 R2 environment that we plan on standing up.  We are using SCOM to monitor approx. 400 servers (physical and virtual).
    We have been using 2007 R2 for a few years and we'd like to start using 2012 R2.  Instead of using the update path (2007 R2 to 2012
    to 2012 SP1 to 2012 R2), we are planning on setting up a new 2012 R2 environment and configuring our servers to start reporting to 2012 R2 (after it has been configured in such a way as to "mimic" our 2007 R2 environment).
    Ideally, we'd like to avoid going through the upgrade path.  (We'll leave our 2007 R2 environment running so that we can still access "historical
    data" until the new 2012 R2 environment has had a chance to build up its own "historical data".)
    So ... I was thinking we could export our overrides from 2007 R2 and import them into 2012 R2, but I'd like to verify that this approach makes
    sense.  We haven't done extensive customizations to 2007 R2 in terms of Distributed Applications or Management Pack Objects (although we have made some changes - which I guess we could manually configure in 2012 R2 to offer the same "experience").
    The following are some of the Management Packs that we are using in 2007 R2:
    Microsoft Windows Active Directory
    Active Directory Certificate Services
    EMC Storage Monitoring
    IBM Hardware
    Microsoft Exchange Server 2010
    McAfee
    Microsoft Forefront Server Protection 2010
    Microsoft Office SharePoint Server 2007
    Microsoft SQL Server
    Microsoft Windows DNS Server
    Microsoft Windows WINS
    Microsoft Windows Hyper-V
    Microsoft Windows Internet Information Services
     Microsoft Windows Server
    Microsoft Windows DHCP
    NetBackup Operations Manager
    Office Communications Server
    OpsLogix (BlackBerry)
    Service Level Dashboard for OpsMgr 2007 R2
    SolarWinds Orion
    Schedule Maintenance Mode
    Team Foundation Server 2010
    Virtual Machine Manager
    Microsoft Windows Cluster
    Operations Manager 2007 R2
    I appreciate all feedback and the sharing of you expertise.
    Thanks, Joe.

    As long as the base pack works and you wish to retain the customisation then you should be ok, there’s a good article
    here which explains how to perform the migration and some of implication/things to check.
    There will be complications if you’ve stored anything in the default mp but this is explained in the above article.

  • MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

    We need the download of SCOM 2012 without Service Pack1.
    Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
    to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
    Upgrade was started from dos elevated prompt with modified parameters like this:
    setup.exe /silent /upgrade
    /AcceptEndUserLicenseAgreement:1
    /UseLocalSystemDASAccount
    /DataReaderUser:<domain\user>
    /DataReaderPassword:<password>
    Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
    SCOM 2012 to SCOM 2012 SP1 it succeeds.
    Unfortunately, we don't find any downloads for the first release of System Center 2012  e.g. Operations Manager.
    Everything shows Service Pack 1 or the newer R2.
    Who can help?

    Our “Recommended” rolling upgrade path looks like the following:
    SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
    SCOM 2012 SP1 UR4+ > SCOM 2012 R2
    Also you can refer below link
    http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

Maybe you are looking for