Cannot remove warning message from screen
I work remotely and use Outlook Web App to access my emails.
Everything works fine other than I always get this warning message:
which I cannot remove as the 'Continue' option is unresponsive to clicks.
Anyone have any ideas how to cure this??
Many thanks.
The server has a self-signed certificate, which means that the people in charge of it don't know how to do their job. That's not a problem I can help you with. However, the warning dialog should not be unresponsive.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Similar Messages
-
Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up -
How do I remove or unregister my iphone. Changed to Samsung s4 and now cannot receive text messages from iphone users. Pls help
http://support.apple.com/kb/ts5185
-
Warning messages from ME_PROCESS_REQ_CUST method CHECK
Hello All,
I am facing below mentioned issue with BADI ME_PROCESS_REQ_CUST
1: how can we issue warning messages from BADI ME_PROCESS_REQ_CUST method CHECK?
2: Check method is called twice if I click on check button in ME52N.
ThanksHI ,
You can use Below
include mm_messages_mac. "useful macros for message handling
if ur condition .
mmpur_message_forced 'W' 'ME' '083' text-001 '' '' ''.
endif.
text-001 : text element for your description .
BUt Warning Message will not keep the screen on error page . it will be better to use 'E' for error if you want
mmpur_message_forced 'E' 'ME' '083' text-001 '' '' ''.
regards
Deepak.
Edited by: Deepak Dhamat on Oct 21, 2011 8:20 AM -
I cannot delete the messages from my mailbox
I cannot delete any messages from my mailboxes. Please help
If you are using the native Apple email app you should be able to swipe to the left and delete. If you can't then remove and reinstall the email account. If that does work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
I have an ipad and Iphone. I cannot send I message from my ipad to certain people and yet can from my Iphone. Any suggestions
You can send iMessages to other iOS devices, like iPad, iPhone, etc. Furthermore, the other iDevices users must have set up their iMessage.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I switched to Galaxy and I cannot get my messages from I-phone users. I still have my ipad mini but I need to get my messages on my phone...Help!
as robdrage says - they will need to send txts, not imessages. And if you have not already done so - log into apple dot com and get to your profile / device list, and remove the phone. If apple thiks the device is active, and the phone number is the same, it will continue to intercept and misdirect messages.
take a look at this - near the end i how to do it at apple.com (it is not real clear on the web page)
http://www.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm _seq=62995 -
'Cannot obtain error message from server' when trying to use ODBC
Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments -
Weblogic 10.3 Not Removing Expired Messages from JMS Queues
Dear All,
We have an application that is running on Weblogic 10.3.
This application (let us call this application Y) receives messages on a JMS queue. These messages are placed on the queue by another application (let us call this application X). We would like to have these messages expire within a certain amount of time (i.e. 90000 ms) if they are not consumed.
Now when application X places the messages onto the queue for application Y to consume, the JMS producer sets the time to live to 90000 ms. We can see that expiration time has been set appropriately in the weblogic console. If a message sits on the queue for longer than 90000 ms the state string of the message is changed to "receive expired". What we don't understand is why the expired messages still end up being consumed from the queue.
We understand that Weblogic is supposed to have an 'Active Message Expiration' thread that will remove expired messages from the queue. The Expiration Scan Interval for the JMS Server is set to 30 (seconds).
Can anyone tell us why our expired messages don't seem to be deleted from the queues?
TimThank you for the response Rene.
We have set up both the active expiration scan and the message expiration policy. The active expiration scan is set for every 30 seconds. The message expiration policy is set to "discard". However, the expired messages are still being consumed. Is it possible we are doing something wrong? See a portion of our configuration files below.
We have set up the expiration scan time interval. See a portion of our config.xml below:
<jms-server>
<name>brokerJMSServer</name>
<target>AdminServer</target>
<persistent-store xsi:nil="true"></persistent-store>
<store-enabled>true</store-enabled>
<allows-persistent-downgrade>false</allows-persistent-downgrade>
<hosting-temporary-destinations>true</hosting-temporary-destinations>
<temporary-template-resource xsi:nil="true"></temporary-template-resource>
<temporary-template-name xsi:nil="true"></temporary-template-name>
<message-buffer-size>-1</message-buffer-size>
*<expiration-scan-interval>30</expiration-scan-interval>*
<production-paused-at-startup>false</production-paused-at-startup>
<insertion-paused-at-startup>false</insertion-paused-at-startup>
<consumption-paused-at-startup>false</consumption-paused-at-startup>
</jms-server>
<jms-system-resource>
<name>broker-jms</name>
<target>AdminServer</target>
<sub-deployment>
<name>EhrBrokerRequestQueue</name>
<target>brokerJMSServer</target>
</sub-deployment>
<descriptor-file-name>jms/broker-jms.xml</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
We have set up the message expiration policy in our jms descriptor. See a portion below:
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-jms xmlns="http://www.bea.com/ns/weblogic/weblogic-jms" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-jms http://www.bea.com/ns/weblogic/weblogic-jms/1.0/weblogic-jms.xsd">
<queue name="EhrBrokerRequestQueue">
<delivery-params-overrides>
<redelivery-delay>-1</redelivery-delay>
</delivery-params-overrides>
<delivery-failure-params>
<redelivery-limit>-1</redelivery-limit>
*<expiration-policy>Discard</expiration-policy>*
</delivery-failure-params>
<jndi-name>EhrBrokerRequestQueue</jndi-name>
</queue>
</weblogic-jms>
What could we be doing wrong?
Kind Regards,
Tim -
Database Connection Error: Cannot obtain error message from the server
I have a SQL statement that wants to add a temp table to the database. The SQL statement works fine but when I try to add it via 'Add Command' feature in Crystal XI R2, I get the following error message:
Database Connection Error: Cannot obtain error message from the server
Any ideas?
Thanks in advance,
Zack H.Hi Raghavendra,
I am using this in the 'Add Command' feature but I get the error message displayed in the subject line:
CREATE TABLE #TibetanYaks(
YakID char(4),
YakName char(20) )
INSERT INTO #TibetanYaks (YakID, YakName)
SELECT LastName, FirstName
FROM Employee
WHERE EmployeeID between '2000' and '3000'
I haven't tried to add this as a stored procedure but I imagine it will work as I have no problems yet with stored procedures. I simply want to be able to use temporary tables for the sole purpose of that session and not creating anything static in the database.
By the way, even though I get the error message, when I look on the backend database, I see that the temporary table was successfully created...its just not brought across correctly in Crystal.
Any ideas?
Zack H. -
CCMS issue: "Determining warning messages from CCMS"
Hi!
We have a performance problem by accessing of solution in tcode DSWP.
We retrieve the warning: "Determining warning messages from CCMS"
In order to solve or analyse this problem I have the following questions:
1) How collects CEN the data from satelite systems?
1a) how? --> RFC, etc.
1b) mode? --> Push, Pull, etc.
2) How the data will be transfered from CEN to tcode DSWP?
Any helpful information will be appreciated.
regards
ThomHi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger -
Tcode DSWP, Determining warning messages from CCMS
We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to access the desired solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
How can I check whether all the agents work in push mode and that we do not use standard CCMS methods that can cause the RFC load?
Thank you very much for any helpful information
Regards
ThomHi Thom,
Have you already installed CCMS agents, the will speed up communication? That's definitely required in your situation with many systems connected to SolMan.
See [http://service.sap.com/monitoring|http://service.sap.com/monitoring]
You can also check CPU, Memory, as recommended by Afi, but I expect that this will not be the bottleneck.
Response times depend on the number of connect systems, number of activated monitoring objects (MTE nodes), number of server, instances.
If you are not satisfied with performance, I would recommend to open a customer message on component SV-SMG-OP or SV-SMG-MON-SYS.
Best regards,
Ruediger -
Cannot remove adobe reader from IE7 version8
Please advise I have tried everything!!
ThanksKeep getting
1606 error.
Posted previous ( cannot remove adobe reader from IE7 version8 in error) -
Hyperlink warning message from HLINK.dll
Hi,
I have a access file (Created in Win Xp and Access 2000) which has forms. I have a hyperlink in one of the forms which opens a word file and merges data with the word doc.
Now I am supposed to make it work in Win 7 and Office 2010.
When I click on the link, it opens the file once and completes the procedure. As soon as this is done, I get warning message from HLINK.dll as "some files may contain viruses....etc". When I click OK, it open same file again does same processing. So
same file is generated twice.
I believe that if the warning message is suppressed, it wont generate second file. Please help me to suppress the warning message.
And if you feel there is some other solution to this, please suggest.
TIA
Regards,
NareshHi
Naresh,
You may disable warning messages hyperlink in Office 2010 by the steps below:
===========
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious
problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1.
Click
Start, and then click Run.
2.
In the
Open dialog box, type regedit, and then click
OK.
3.
In Registry Editor, locate one of the following registry subkeys:
o
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common
o
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common
NoteYou only have to modify one of these registry
subkeys. You do not have to modify both of them.
Note If the Security subkey already exists, skip to Step 6 after selecting the Security subkey.
4.
Click the registry subkey, point to
New on the Edit menu, and then click Key.
5.
Type Security, and then press ENTER to name the key.
6.
On the
Edit menu, point to New, and then click
DWORD Value.
7.
Type DisableHyperlinkWarning, and then press ENTER to name the entry.
8.
In the right pane, right-click
DisableHyperlinkWarning, and then click Modify.
9.
In the
Edit DWORD Value dialog box, click Decimal, and then type 1 under
Value data.
Note A value of 0 enables the hyperlink warning message. A value of 1 disables the hyperlink warning message.
10.
Click
OK.
11.
Exit Registry Editor.
For details, refer to the KB articles:
http://support.microsoft.com/kb/829072
http://support.microsoft.com/kb/925757
Best Regards,
Sally Tang -
Database Connector error: 'cannot obtain error message from server'
I am using Oracle stored procedures and I have used IN parameters for input and INOUT parameter of REF_CURSOR TYPE for returning resultset in Crystal Report 2008 by using package. Now when I am trying to add the package in the Crystal Report, parameter input box prompts, I enter some values and gets Database Connector error: 'cannot obtain error message from server'.
But when I do not use INPUT parameters and use OUT parameter of REF_CURSOR type it runs well without any issues.
We are using ODBC connection for Oracle.
Kindly suggest.Hello,
Search the Knowledge Base for "oracle store procedures" and you'll find a document on how to write a SP so CR can use them.
Thank you
Don
Maybe you are looking for
-
After extensive testing, I have been unable to successfully run an EXTERNALPROCESS as a PROCESS FLOW. Is this a bug in OWB 9.2.0.3.0 or is there something wrong with my setup? There are two basic scenarios, each of which is trying to run a very simpl
-
Detect error message on the screen
How do I detect error message on the windows 2000 screen? I need to detect any error message appearing on the screen Thank you, Jeff
-
Hey, So I'd like to be able to execute another java program. File directory = new File("."); try { List<String> l = new ArrayList<String>(); l.add("Java "+directory.getCanonicalPath+"AnotherProject/bin/main
-
Copy-into-Safari causes crash of all, in 10.4 & 10.5
My two computers -- iMac with 10.4.11 & Safari 3.2, and MB-Pro with 10.5.6 & Safari 3.2.1 with no Safari plug-ins -- are stable except sometimes when I "copy" into Safari (in URL field or a web-page field) which causes the Spinning Ball to appear, an
-
Hey forum, So seeing as Fibre broadband has been pushed back again, i just wanted to know a few things if that is possible. 1. Does the FTTC cabinet HAVE to be in a specific location? 2. Is there a way i can locate my current ADSL cabinet? 3. Openrea