Cannot Render from SpeedGrade CS6

So, I'm doing some testing to see if SpeedGrade CS6 is for me or not, and honestly…I love what I've seen so far. But, I'm having an issue that's probably easy to resolve (no pun intended), but for the life of me I can't figure out why.
I put a quick sequence of 4K R3D files together in Premiere CS6, exported an EDL, opened the EDL in SpeedGrade and linked back to the footage. Everything seems to work fine. I've graded my clips, added a vignette, and now I'm trying to render/export. But the "Render" button seems permanently greyed out. No matter what combination of output options I choose, it just won't let me start a render session. I'm running the latest CS6, updated via the Adobe Updater. I'm working on a 15" MacBook Pro with Core i7 processor and plenty of RAM. The only connected peripheral is a Thunderbolt RAID setup.
Any ideas why I can't render?
Thanks!

Hello Stephen,
simple things first...
Did you set an output name?
If not, the render button will be grayed out.
Cheers
Thomas
Am 21.06.12 21:25, schrieb stephenamick:
>
      Cannot Render from SpeedGrade CS6
created by stephenamick <http://forums.adobe.com/people/stephenamick> in /SpeedGrade/ - View the full discussion <http://forums.adobe.com/message/4511674#4511674

Similar Messages

  • I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress

    I cannot upload fotos from Photoshop Cs6 or Lightroom 5 to Wordpress whatsoever. When I export with lightroom 4 trial, no problem.
    Social media marketing is an important part of my business as a photographer, so it is very important for me to make this work.
    Thank you for your help.
    - Reinhard

    The uploaded file has 389kb... Wordpress accepts everything up till 1mb
    error message (see image) is german saying 'bei dem upload ist ein fehler aufgetreten. Probier es später nochmal.' In english should by something like 'there was an error while uploading. Try again later.'
    is definitely a adobe problem, because I tried the exact same foto with same export settings, and it works well with lightroom 4 as well as photoshop cs5, but neither lightroom 5 nor photoshop cs6...

  • SpeedGrade CS6 keeps crashing on render

    I have a Macbook Pro with 2.6 GHz i7 with 16 gb of ram updated to the latest OS X (10.8.5) 
    SpeedGrade CS6 keeps crashing on rendering.  I have selected a couple of output options (h.264, ProRes, and uncompressed), but none work.  I believe I have the latest update to the software (I believe 6.0.4), and I don't know if this has anything to do with the OS or the program itself.
    Is anyone else experiencing this? I have checked the forums, but they haven't really helped that much for me.
    EDIT:  To add further, I have restarted my computer and I have rendered video successfully in the past.  This just started happening today.

    W7 Ult x64, AMD Phenom X6 3.3GHz, 16gigs of RAM, GTX 550 Ti
    I'm rendering WMVs. I am not running out of disk space. I have tired various clips to render with (I'm assuming source files are the files I edit to render). What are comp settings?
    My settings have worked in the past, but not after my most recent format. Settings: http://imgur.com/a/0yDsF

  • Cannot access some folders from Bridge CS6

    Only certain folders on my internal drive can't be accessed from Bridge.
    I can access the folders from PS CS6 but from Bridge, files cannot be displayed.

    Not sure where to look to ensure a folder is both read & write permission. Focusing on one of the folders which suddenly I can't access from Bridge - Pictures; if I use Finder all pics  are visible from the folder. If I open a file from the folder in Photoshop I can edit and save in the Pictures folder.
    Select a folder in the finder and choose cmd + i or use menu File / show info. This provides a window and at the bottom it shows the permissions that are set. If you are the user and have administrator privileges (meaning you you have access with password to the account and are able to install and uninstall applications) it should sat for both system and administrator 'read and write'
    Only from Bridge are certain folders inaccessable....in Bridge the folder has a red circle with white - and message 'no items to display'
    This is getting a bit tricky. If you have jpeg or raw files in the picture folder that also show in the Finder Bridge should display them without problems. If you try to visualize a library form iPhoto or Aperture this will not be able in Bridge because those files are packages.

  • Cannot "Get started" or publish a site from Dreamweaver CS6 because the account is not associated wi

    I cannot "Get Started" the Business Catalyst extension from Dreamweaver CS6. This is the error message I receive: "An account with the same email already exists in Business Catalyst. To associate the Business Catalyst account with your AdobeID, please log in to the Business Catalyst web administration console."
    I have tried the following actions as per this note, but still unsucessful: http://forums.adobe.com/docs/DOC-2202#comment-5263
    Can anyone help please as I have purchased CS6 now and have sites that I need to administer, I have uninstalled cs 5.5 which worked fine.

    There is no need to install the Business Catalyst extension in Dreamweaver CS6. Business Catalyst is incorporated into the program.
    If you're having difficulties logging into BC, I suggest that you post a request for help in the dedicated Business Catalyst forum.

  • Cannot overwrite PDF when exporting to Acrobat from InDesign CS6

    When exporting to Acrobat Pro X from InDesign CS6, there are times when I want to overwrite an exising file but I get an error msg that the file is in use (it is not--this even happens when I have closed the file and quit Acrobat) or i don't have permission. In the Info panel at the Finder, i see that "myusername (ME)" does have permission to read and write this file. As a test, I also changed the permissions for Admin and Everyone to Read & Write, but that did not help. I've checked Preferences in both InDesign and Acrobat Pro anc can't find a relevant setting.
    To save the file with the same filename as the pre-exisitng PDF, I have to close the pre-exisitng PDF and move it to the trash.
    I have no problem overwriting a PDF document from Acrobat. This only happens when I am exporting from ID.
    I am on a Mac running the latest version of OSX.
    Any ideas?
    Thanks!
    Carol Gunn

    Make sure that the PDF you are trying to overwrite is not selected in your finder. I've found that if it's selected in the finder then the preview tricks Indesign into thinking the file is busy

  • EDL Files exported from Premiere always fail on import to SpeedGrade CS6

    Steps to reproduce (for me):
    1. Export any sequence as EDL.
    2. Open SpeedGrade CS6
    3. Browse to EDL
    4. Double Click, or click the +, or drag to timeline
    5. Error thrown:
    Error
    Key not supported in edit 16
    File: 016 AX     V           B 0:02:04:04 00:02:06:15 00:00:3:10 00:00:35:21
    Line 34
    Note: This varies depending on project/sequence but essential is the same error for each -- always "Key not supported" though line # and file info changes.
    Any help would be GREATLY appreciated.
    Best,
    Seth

    EdanCo I'd like to know the exact same thing. It's now September.
    I also have multiple layers, have spent some 70 hours building this project and simply want to adjust colours. For workflow one could colour correct before editting but that does not make sense/sence.   As for editing this way like Manual LP, really likely would work but surely would add additional time to the project trimming everything into one line. Who does that? I may as well have my 1/2 inch analog film out with a splicer and start editting analog film... hahaha  it seems it's a very round about way of doing things - But Manuel LP I really do commend you for finding a way around it, and figuring out a work flow that incorporates bypassing this EDL error.  Thankyou, I may do that on the next project   The rest of us sit around waiting and grumbling at the problem.
    HELLO wonderful people at Adobe.... has there been a solution to this? Or has anyone found one? Really would love to find out. Please hear the people, and let us know even if the issue is being sorted, in this thread.
    Chur!

  • Exporting Timeline from Speedgrade

    I am working with Premiere Pro and Speedgrade CC. I find using the direct-link is fine but a bit limiting in terms of the full potential of Speedgrade. The direct-link from Premiere Pro also seems to slow up my system and grading becomes very clunky despite my 3.5Ghz i7, 3Tb fusion drive, 4gb graphics card, 32gb ram brand new iMac27 !
    So I have exported my timeline from Premiere pro as an EDL and imported the clips natively into Speedgrade. I can now add grading layers etc and the processor seems to deal with this much better. Grading is fast and efficient working with the clips this way. The problem i have now is exporting from Speedgrade and getting my timeline back into Premiere Pro for finishing , titling etc and final export.
    I have managed by default i think to export my timeline as individual clips using the PathElement-0 option from the Render panel ( i found this on a tutorial ) and the clips are saved in a folder as .mov files. When I import these back into Premiere Pro they are in a random order and not in sequence.
    How can i now re-form my timeline from these clips in Premiere ?
    I have tried saving an EDL from the Timeline tab in Speedgrade but this just refers back to the imported non-graded clips NOT the new graded clips in my Speedgrade timeline ?
    Does anyone have a good Premiere Pro / Speedgrade roundtrip that excludes the Direct-Link to Speedgrade ???
    Thanks
    Best
    Mark

    Sorry to be so long in replying ... but here's my bit. Adobe's staffers have indicated they are moving from the "old" EDL process to the direct-link, and so ... it's not a heavily supported nor even considered part of the internal thinking process ... I think that's fair to say. Still available but not emphasized? I've noted the staffers don't tend to work here so much with internal-Adobe EDL questions, mostly for those who are clearly working with timelines from other sources and therefore MUST use EDL & XML importing.
    I'm wondering if part of your slow-down issues are waiting until your editing is finished to edit-lock & THEN only taking a "final" timeline into Sg? Prior to the CC-model with the Direct Link so heavily incorporated, that was the ONLY thing that made sense. Now, it's so fast to buzz forth & back that working sub-sequences is becoming common and "standard" ... if for no other reason than Sg is faster in d-l mode with shorter sequences, rather than say working a single 87 minute sequence. My personal model is to take sequences over for basic correction early on, pretty much as soon as I've got them mostly sorted. Especially if I've got b-roll the quality or "feel" of which I'm not sure. (Some of my b-roll is provided by others ...) After seeing the way the look can be worked with each, I may even change some of my sequence editing choices. And playing back the full Master sequence in the Program Monitor I can see if I need to adjust any sub-sequences to better match.
    As to using the old way ... I think using proxies might work better, but I don't have much experience with that. I know that was standard and most colorists knew how to do that sleeping. I did it a few times, and once or twice even got it right first off without futzing. Other times I was on here for questions, which got some raised eye-brow comments back & forth between the Experienced Masters ... "geez, dumb noob's anywayz ... "
    SpeedGrade can do this, the controls are still there and pretty much unchanged if I never learned to decipher the Gobbledeegook Speak. Check out some of the tutorials for CS6 days, as that was still heavily used at that time.
    Neil

  • Fxphd Fastforward: SpeedGrade CS6 Fundamentals | Learn SpeedGrade CS6 | Adobe TV

    SpeedGrade CS6 Fundamentals will quickly get you up to speed on how to more effectively use the new grading software from Adobe. Taught by Joost van der Hoeven, this all-new course contains over three and a half hours of training covering the fundamentals you need to know to get most out of this new release. It also contains almost 1GB of source material used in the classes so you can follow along with the instruction.
    http://adobe.ly/P4DVgN

    I am starting the Speedgrade CS6 Fundamentals tutorial but cannot see where the 1 GB of Source files are located for download.

  • Exporting to Flickr from Bridge CS6 Fail

    I'm trying to export photos from Bridge CS6 to my Flickr.com account for the first time in several months, and getting an error message from Bridge that it cannot "authenticate with Flickr".  I've used presets that were successful in the past, as well as going through the usual routine to get new authentication codes from Flickr.com. I recently updated my iMac to OSX 10.x, but visiting Flickr's community site suggests that they adopted a new API that was sent to developers like Adobe and that Adobe has not updated their export protocol. Other contributors to the site suggest that Adobe's position is that Flickr needs to do something.  Are others experiencing this problem? Does Adobe offer no solutions to this problem?
    Any advice would be appreciated.

    I had to rebuild the file from scratch in order to export the pdf, and the hotspots line up accurately to their originally location drawn on fireworks.
    This may have occurred because I began the document with a canvas size of portrait letter, but changed the canvas size later to landscape letter, and although everything looked well and fine, the export was still triggering the old referential data in the file.

  • Problems with Adobe Speedgrade CS6 in Windows 7

    I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
    Windows 7 Ultimate SP1
    Gateway FX 6800-01e
    2.67 GHz i7 Quad-core processor
    16.0 GB RAM
    750GB primary hard drive (Seagate ST3750528AS)
    2 - 2TB secondary hotswap drives
    NVidia Quadro 4000 w 2GB dedicated RAM
    2 Acer 231SHL HD monitors running in extended dual screen mode
    Adobe Speedgrade 6.0.4x25
    It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference.  I have also tried uninstalling it and reinstalling it.  I have also applied the latest update through the program interface. The other components of the suite I have installed are:
    Premiere Pro CS6
    After Effect CS6
    Acrobat XI
    Audition
    Bridge
    Photoshop (32-bit and 64-bit versions)
    Lightroom 4.3
    Prelude
    The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped.  Thanks in advance!
    -Carl Hayes
    "What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

    Hi,
    Have you get rid of the problem ?
    I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
    It's on windows 7 pro.
    Thanks in advance

  • Adobe Media Encoder CS6 completely missing from Mastercollection CS6

    Computer Environment:
    MacBook Pro Early 2011
    Graphics  AMD Radeon HD 6490M 256 MB
    Memory  16 GB 1333 MHz DDR3
    SSD with 512GB; about 81GB are still free
    Mavericks  OS X 10.9.5
    Adobe Mastercollection CS6
    Quicktime Player (Standard)
    Problem:
    I am currently missing the sidekick Adobe Media Encoder (AME), even though I succesfully can run After Effects and Premier Pro.
    I cannot locate the AME app anywhere on my hard drive to launch it manually.
    Steps/general information:
    I initially was able to run AME, after fixing another problem with launching it by deleting the ExportQuickTimeHost.bundle / QuicktTimeHost.bundle as I have described in another post (https://forums.adobe.com/message/7221143#7221143 – #26 is my post).
    Unfortunately, the presets for Quicktime (I needed prores) were missing, even after I have done a workaround, by copying prores-codecs into AME plugins, as described in this post: martin-thoburn.com » Install the Apple ProRES codec without Final Cut or ProApps
    The next time launching QuickTime, I was not able to open it again.
    I uninstalled, reinstalled and updated After Effects and Premier Pro three times now and took away the QuickTimeHost.bundle from AME and Premiere Pro
    I also tried resetting ACL (through Utilities, when starting the MacBook with option key pressed down) as suggested by Seth Goldin in the post https://forums.adobe.com/thread/1010136
    I already tried wiping down the whole Adobe Suite, using the Cloud Cleaner Tool, delete the presets in the user library and then reinstall the apps: Photoshop, Illustrator, Indesign, Acrobat, After Effects and Premiere Pro. There is now only the CS6 (and not for example some CC apps) on my Computer. All apps are up to date.
    I didn't install any other codecs by accident.
    Since AME was again not launching (Splash screen wasn't showing me any plugins, AME could have loaded). I simply deleted AME by trashing it.
    Now it's completely gone, even after reinstalling (and launching) After Effects and Premier Pro.
    By trying to install AME's updates (6.0.1 and 6.0.2) I naturally get an error message, since the main app is missing.
    I have battled with AME about half a year now, so things like reinstalling Lion and then Mavericks has occurred before as well.
    And unfortunately, I am in the middle of a big project, which is due in a month and two days. Hope the links are not too confusing
    – please look through them though, as the solutions I tried out are very clearly written in those posts.
    Any help would be greatly appreciated.

    Update in chronological order:
    I uninstalled the Cloud, which I kept for making updates; I also uninstalled everything from Adobe (CS6 mastercollection)
    I ran the Cloud cleaner tool
    I reinstalled only Photoshop, Illustrator, Indesign, Premier Pro, After Effects and Acrobat. Bridge and AME were installed as sidekicks of Photoshop and AE/PP.
    So this has solved problem 1 already.
    On to problem 2 (update only):
    updated all adobe software, incl. DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate
    I installed Final Cut Pro 7
    I (re)installed Quicktime 7.6.6*
    I downloaded the Prores Presets for AME (as you suggested in post #2)
    I tried opening AME – that did not work, as it hung on the ExporterQuicktimeHost.bundle
    Went to AME app, right clicked on app icon to get "Show package content">Contents>Plug-Ins>Common and deleted ExporterQuickTimeHost.bundle and ImporterQuickTimeHost.bundle
    repeated last step with Premiere Pro and AE
    I opened AE
    I tried importing the presets through AME>import>presets... That did not work. I get this pop-up message:
    restarted my computer
    tried again to import AME without luck
    tried the solution of this discussion Re: Quicktime Export options are missing (only in AME) (post #8)
            since I noticed that mine was changed back after the reinstallation. No luck.
    restarted the computer again. No luck.
    Put back only the ExporterQuicktimeHost.bundle into AME's package content
    tried to open AME without luck
    removed the Quicktimebundle once more to open AME (worked)
    opened PP to check if I could export in queue: AME does not open by itself, still.
    I tried opening a prores file (end as .mov) that I encoded at university (not on my provate computer) – did not worl
    I checked if I could open a mov-file which was not encoded to prores: that worked.
    I looked into Martin Thoburn's method again to try one more time in AME to find the settings "Quicktime". No luck.
    I also have a third problem that may be linked to this, since it also has to do with PP and AE:
    Re: Can anyone help? "DynamicLink" not available attempting to open Mov in Photoshop CS6
    My post there is #22.
    But now that I absolutely made sure that I do have the prores codecs,
    I strongly suspect that it may also be a problem, which is discussed here:
    Are the ProRes codec and .MOV file no longer supported?
    ...namely, that the codecs are just not visible. Unfortunately, this discussion is not resolved either.
    HarleyTDavis's post #30 of this discussion Are the ProRes codec and .MOV file no longer supported?
    suggests something complicated (because I yet would need another Adobe version), which I may try at some point.
    Alright. That is all the effort that I can afford in time for this. I am too exhausted to go on so I'll do a workaround in FCP
    – now that I got it – and will ask someone else to encode my outcome to a prores-Version.
    If I feel like it – and yeah, I'd rather work with the Adobe Suite CS6 mostly – I'll come back to this discussion after a having clean wiped my computer and reinstalled everything.
    Thanks to both of you for looking into this with me. I'm positive this can be solved – just not now.

  • Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop  After restart error message appears:  - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

    PROBLEM: Cannot print from Photoshop
    After restart error message appears:
    — “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
    • All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
    The printer printed fine until about 2 weeks ago when this error message appeared.  Printing continues from Pages, I-photo, preview etc. —  only Photoshop fails.
    The printer has been turned on and off, as have open documents been closed and open etc..   Preferences reset.  Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
    Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
    Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
    Attempting unsuccessfully to print to Epson 3880
    What Adobe support will be of help.
    Robert Darling —  2/19, 20, 21,22,23/2015

    Probably best to ask in Photoshop General Discussion
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • WPC Cannot render container with special characters

    Hi
    My portal generates error: "Cannot render container : An error occurred while loading the document from the resource content" when i Finish editing my page. 
    The special characters that I use are words with accents only with capital letters (used in spanish like Á, É, Í, Ó, Ú)
    Any ideas on what could be causing this?
    Portal 7.01 SP06
    Jose Mercado

    I solve my problem, with  Sap Help.
    They send me: check the charset settings on client & J2EE as follows
    On Client side: Internet Explorer menu > Tools -> Internet Options -> Advanced
    please select 'Always send URLs as UTF-8'.
    On J2EE engine:  . It is important to check the parameter exists for all server nodes in config tool
    -Dhtmlb.useUTF8=X
    -Dfile.encoding=ISO-8859-1
    -Dfile.encoding=UTF8

  • WPC Error- Cannot render container : An error occurred while loading the do

    Dear All
    we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
    following messgae appera when we open up a page to edit in WPC
    Cannot render container : An error occurred while loading the document from the resource content
    we found this exception in error log in Server..
    couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
    #1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
    #1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
    #1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
         at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
         at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
         at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
         at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
         at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
         at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
    Please tell us how to fix this error
    regards
    Buddhike

    Need to upgarde to SP14

Maybe you are looking for