Cannot repair disk errors for OSX boot volume using Disk Utility while booted from different disk

I have tried three times to repair my boot volume (OSX 10.6.8 Snow Leopard) permissions using Disk Utility while booted up on a different volume (running Snow Leopard 10.6.4). After hours of Disk Utility reporting that it HAD fixed the problems, an immediate click of "Verify permissions" immediately results in the apparently same continuous stream of permission errors.

Then better luck next time around. Here are some ideas for then:
How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade to Lion:
Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
Boot From The Lion Installer which is located in your Applications folder.
Follow instructions for installation.

Similar Messages

The action cannot be performed error for Webi Report

HI,
I am getting the error The action cannot be performed error for Webi Report. I am getting this error after i save the report and open it again.

This is happening for only 1 particular report. In the end i removed some of the objects from the query and added some new ones.
Strangely it worked!

What permission is needed for a login to access the restored database(backup from different server)

what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.

Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Intel iMac won't boot from disc or in safe mode - cannot repair disk

I have an early Intel iMac 20" (2GHz core duo) that generally works fine. I recently ran Onyx and it reported a startup disk error, suggesting I insert the install disk, hold 'c', and use disk utility to repair the disk.
NOTE: I have performed this operation successfully in the past and know how to do it.
On this occasion, the iMac simply booted up to the normal desktop each time after multiple attempts at booting from both the original OSX 10.4.4 install disc and the OSX 10.5.1 install disc (current os is 10.5.8).
I then attempted to start holding 'shift' to start in safe mode but again, repeated attempts all landed me on my normal desktop.
I then attempted to hold 'option' to be given the choice of startup disc but again was ignored and went straight to my normal desktop after multiple attempts.
Note that my iMac appears to be running fine otherwise. I was just trying to perform some routine maintenance and have run across this problem.
Any ideas? This mac will be 5 years old soon and I would like to keep it running for a while longer.

Hello Devoidarex
You'll want to use the Leopard Install DVD to Repair your Startup Volume and may want to try a USB keyboard if your using a wireless.
Another option is to insert the DVD and go to: System Preferences > Startup Disk > select the Install DVD > then Restart.
Dennis

HELP required! Cannot boot leopard, cannot repair disk from install disk

While my Macbook was indexing the hard drive (leopard 10.5.4), it froze and I was forced to force shut down the laptop. After doing that, it would not boot up. It stayed at the gray screen with the Apple logo and rolling ball and the laptop eventually shut down after 10 minutes or so.
I have attempted to boot from my Leopard Install DVD and tried disk repair but I could not do so because the buttons were "grayed out" and I could not click them. The only button that can be clicked is "verify disk". I tried doing so and it resulted in many errors.
I also tried booting in single user command mode (CMD+S) and typed in fsck -fy but it could not repair my disk.
As a last resort, I have tried to reinstall a fresh copy of OS X but it says that I need to wipe out my whole hard drive before doing so. I have so data that I have put on my Macbook in the last week and would like to recover it before re-installing OS X. Is there any way to do so?
My most favorable outcome would be to fix the problem and avoid reinstalling OS X (if possible). Any suggestions?

Without a bootable backup/clone or a TimeMachine restorable file, you're out of luck unless you pop for DiskWarrior and try to fix your file directory (no guarantees, but it works for many).

Help! Cannot Repair Disk??

Hello all. I was booting into Single User Mode (fsck) and then later booting from the G5 Install DVD, using Disk Utility:
Disk Utility failed to repair the disk
This is what it says in the dialog box:
(after the line)
Checking catalog file
illegal name in red
The volume xx could not be repaired
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Although there doesn't seem to be anything "wrong" with my G5 at the moment, everything seems to be running smoothly. I only found this out after Photoshop froze and I thought I wanted to restart and use fsck to repair the disk.
Should I start worrying? Do I need to erase and reformat the disk to reinstall??
Thanks and cheers
Background Info: PowerG5 Quad 2.5GHz, OS X 10.4.5

You need to buy and run DiskWarrior. No Mac user should be without it. It'll almost always repair corruption problems on a disk that Disk Utility can't. That said DU is great for most problems.
And as soon as it's done you need to start with a plan to backup your files.

Unibody MBP - I cannot repair disk permissions.

Fresh install of 10.5 reboot -> run repair disk permission with the following errors:
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/FWAVCPrivate.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/AppleVAH264HW.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/AppleMobile DeviceHelper.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/AppleMobile Sync.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be -rwxrwxr-x , they are -rwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/AppKit.framework/Versions/C/_CodeSignature/CodeResou rces", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/_CodeS ignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resour ces/DotMacSyncHelper.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/DotMacSyncManager.framework/Versions/A/Resour ces/dotmacsyncui.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/DotMacLegacy.framework/Versions/A/_CodeSignat ure/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/_CodeSignature/CodeDirecto ry", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/_CodeSignature/CodeResourc es", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/_CodeSignature/CodeSignatu re", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBEHCI.kext/ Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBEHCI.kext/ Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBEHCI.kext/ Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBHub.kext/C ontents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBHub.kext/C ontents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBHub.kext/C ontents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBMergeNub.k ext/Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBMergeNub.k ext/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBMergeNub.k ext/Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOHCI.kext/ Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOHCI.kext/ Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOHCI.kext/ Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOpticalMou se.kext/Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOpticalMou se.kext/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBOpticalMou se.kext/Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBUHCI.kext/ Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBUHCI.kext/ Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBUHCI.kext/ Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBCompositeDriv er.kext/Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBCompositeDriv er.kext/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBCompositeDriv er.kext/Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriver.kex t/Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriver.kex t/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBHIDDriver.kex t/Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle/Co ntents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBUserClient.ke xt/Contents/_CodeSignature/CodeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBUserClient.ke xt/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBUserClient.ke xt/Contents/_CodeSignature/CodeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBMassStorageClass.kext/Contents/_CodeSignature/C odeDirectory", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBMassStorageClass.kext/Contents/_CodeSignature/C odeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Extensions/IOUSBMassStorageClass.kext/Contents/_CodeSignature/C odeSignature", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/CoreServices/CCacheServer.app/Contents/_CodeSignature/CodeResou rces", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/CoreServices/Kerberos.app/Contents/_CodeSignature/CodeResources ", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/CoreServices/KerberosAgent.app/Contents/_CodeSignature/CodeReso urces", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/Frameworks/Kerberos.framework/Versions/A/_CodeSignature/CodeRes ources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/KerberosPlugins/KerberosDatabasePlugins/db2.bundle/Contents/_Co deSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/KerberosPlugins/KerberosDatabasePlugins/kldap.bundle/Contents/_ CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/SystemProfiler/SPDisplaysReporter.spreporter/Contents/_CodeSign ature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/CoreServices/Screen Sharing.app/Contents/_CodeSignature/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/ScreenSharing.framework/Versions/A/_CodeSigna ture/CodeResources", should be ?--------- , they are -rw-r--r-- .
Permissions repair complete
No matter what I do, I get this exact same outcome.
Please help....
Thanks!

That's normal according to Apple. They put a technical bulletin out on it even. It has been fixed in Snow Leopard though.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Cannot read instrument errors for Ando AQ6317B using GPIB commands.

Maybe related to reading the status byte using GPIB commands for the AQ6317B OSA: how can I read the instrument errors, if one or more occur? Several instruments return their instrument errors in the format <errorCode>, <"error message"> as a response to the command "YST:ERR?" or similar. Not the AQ6317B optical spectrum analyzer.
Can anyone help me with this one?
Thanks in advance,
Cristian

Yes, I did this using NI MAX also and using NI IO Trace (former NISpy). Many instruments accept "SYST:ERR?" as a query to return any INSTRUMENT ERROR (hardware or firmware).
Well, I guess my ANDO does not. it responds with an empty string, or whatever it has in its buffer from the previous query.
In any case, be it as it may, I will close this issue (still in limbo for me), and just ignore instrument errors for the time being.
Thank you for your answers, though.
Cristian

Error Message when booting from System CD's

Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuck

Not only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck.

Cannot downgrade to 10.3 or boot from 10.3 CD

OK, here is my situation.
I have a Powerbook G4 running OS X 10.4.6. I want to downgrade to 10.3 Panther. The Powerbook shipped with Panther, and I upgraded to Tiger at a later date.
I put in the Panther CD in the drive, restart, and the computer simply locks up. I get the chimes, the Apple logo appears on the screen, then it "jumps" over about a centimeter on the screen, with some black lines around it, and the computer stops responding. I have to restart the machine. Rebooting and holding down C results in the same effect. I can reboot into 10.4 normally, but that's it.
I've verified the disk permissions, and rebooted into single-user move and used fsck to try to repair the disk.
I don't know what else to do to try to get this to work... I only have one disk partition, and it's the startup volume, so I can't erase the disk with Disk Utility, and I can't boot from CD.
So... any ideas or help, please?
Powerbook G4 Mac OS X (10.4.3)

I thought so. You don't have the right version. Your friend's disc won't work. You need either the original installer disc that came with the computer or a retail version of Panther at version 10.3.8 or 10.3.9.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Solaris 10 for Intel - boot from floppydisk

Does anybody has an idea wheter it is possible to boot solaris 10 from floppydisk for installing the OS.
We have systems that cannot boot from ethernet/cdrom but we would like to use/install solaris 10 on these systems.

It is possible to start the installation (boot from) a floppy disk, using
a "DCA" (device configuration assistant) floppy diskette.
A 1.44MB DCA floppy image can be found on CD 2/4 or the DVD, in
the subdirectory .../Solaris_10/Tools, file d1_image. Write it to a
blank floppy media using the Unix "dd" or the MSDOS "rawrite.exe"
utility.
After you start the boot process from the DCA floppy, you must
either use a CDROM / DVDROM device as the boot device for the
Solaris installation, or an NFS installation (server using a supported
NIC in the client; 3Com 3c905, Intel Pro/100, or Dec 21x4x do work).

Getting JPEG Library Error for Corrupt JPEG Data using CS5

After recently upgrading to CS5 I am getting JPEG Library Errors for corrupt JPEG data. I have my old PC still in use that uses CS4 and does not generate these errors when accessing the same site. Could someone please assist me in how to get rid of these errors using CS5? I can't find help out there anywhere for this!
Thanks in advance!

You could use Photoshop's Image Processor to open all of your jpegs in a given folder, make a slight tweek and resave them in the hopes of cleaning out any errors that DW is hitting. It's worth a shot maybe.
1. In PS go to File > Scripts > Image Processor
2. For Step 1, browse to a folder in your site with jpeg issues
3. For Step 2, choose save in same location
4. For Step 3, choose Save as JPEG and check Convert File to sRGB
5. Click Run
This will create a sub folder called JPEG with the images resaved there. You can drag them into the parent folder to replace the originals.
If you haven't already, make sure to report the bug here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
At least the right people will be made aware of it then and if it's common enough to trip whatever quantity/user reports system they use, it would get included for repair.
I honestly don't think it's a "bug" per se, since the forum isn't absolutely flooded with the problem.

Error in oim Role creation using Role Manager Service API from Standalone Java client

Hi,
Facing the following error when trying to create Role using Role Manager Service API from a standalone java client .
Tried with the solution of changing ,
Login into the Web Logic Admin Console --> Servers --> OIM Server --> Protocols --> Modify the Maximum Message from 100000000 to 1000000000, but still the problem persists.
Exception in thread "main" org.omg.CORBA.BAD_PARAM:   vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(Unknown Source)
at com.sun.org.omg.SendingContext._CodeBaseStub.meta(Unknown Source)
at com.sun.corba.se.impl.encoding.CachedCodeBase.meta(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.getOrderedDescriptions(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObjectUsingFVD(Unknown Source)
at com.sun.corba.se.impl.io.IIOPInputStream.simpleReadObject(Unknown Source)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(Unknown Source)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(Unknown Source)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(Unknown Source)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(Unknown Source)
at oracle.iam.identity.rolemgmt.api._RoleManager_ogut7n_RoleManagerRemoteRIntf_Stub.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.createx(Unknown Source)
at oracle.iam.identity.rolemgmt.api.RoleManagerDelegate.create(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.subject.SubjectProxy.doAs(SubjectProxy.java:64)
at weblogic.security.subject.SubjectManager.runAs(SubjectManager.java:262)
at weblogic.security.Security.runAs(Security.java:48)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy3.create(Unknown Source)
at com.idm.role.CreateRole.createRole(CreateRole.java:113)
at com.idm.role.CreateRole.main(CreateRole.java:167)
Thanks In Advance

Hi , I have used OIM 11g R2.
Please find below the code we have used,
package com.idm.role;
import java.util.HashMap;
import java.util.HashSet;
import java.util.Hashtable;
import java.util.Iterator;
import java.util.Set;
import java.util.logging.Logger;
import javax.security.auth.login.LoginException;
import oracle.iam.identity.exception.NoSuchRoleException;
import oracle.iam.identity.exception.RoleAlreadyExistsException;
import oracle.iam.identity.exception.RoleCreateException;
import oracle.iam.identity.exception.RoleLookupException;
import oracle.iam.identity.exception.RoleModifyException;
import oracle.iam.identity.exception.SearchKeyNotUniqueException;
import oracle.iam.identity.exception.ValidationFailedException;
import oracle.iam.identity.rolemgmt.api.RoleManager;
import oracle.iam.identity.rolemgmt.api.RoleManagerConstants;
import oracle.iam.identity.rolemgmt.vo.Role;
import oracle.iam.platform.OIMClient;
import oracle.iam.platform.authz.exception.AccessDeniedException;
public class CreateRole {
private final static Logger LOGGER = Logger.getLogger(CreateRole.class .getName());
OIMClient oimClient = null;
public OIMClient connectToOIM() {
LOGGER.info("In connectToOIM ");
Hashtable env = new Hashtable();
env.put(OIMClient.JAVA_NAMING_FACTORY_INITIAL,
    "weblogic.jndi.WLInitialContextFactory");
env.put(OIMClient.JAVA_NAMING_PROVIDER_URL,
    "t3://V-hydidm1.itig.co.in:14000");
System.setProperty("java.security.auth.login.config",
    "F:\\Projects\\IDM\\Team\\Env_setup\\OIM_Setup\\designconsole\\config\\authwl.conf");
System.setProperty("java.security.policy",
    "F:\\Projects\\IDM\\Team\\Env_setup\\OIM_Setup\\designconsole\\config\\xl.policy");
System.setProperty("OIM.AppServerType", "wls");
System.setProperty("APPSERVER_TYPE", "wls");
System.setProperty("weblogic.Name", "oim_server1");
oimClient = new OIMClient(env);
try {
   oimClient.login("xelsysadm", "Passw0rd".toCharArray());
} catch (LoginException e) {
   e.printStackTrace();
System.out.println("Connected");
return oimClient;
public void readRoleMetadata() {
LOGGER.info("in readRoleMetadata ");
RoleManager roleManagerService = oimClient
    .getService(RoleManager.class);
try {
   Role roleVo = roleManagerService.getDetails(
     RoleManagerConstants.ROLE_DISPLAY_NAME, "API Role1", null);
   Set attributeNameSet = roleVo.getAttributeNames();
   Iterator it = attributeNameSet.iterator();
   while (it.hasNext()) {
    System.out.println("Attribute Name :: " + it.next());
   // roleVo.setAttribute("ADentitlements", "Security Admin access");
   String adEntitlements = "" + roleVo.getAttribute("ADentitlements");
   System.out.println("AD Entitlements :: " + adEntitlements);
   System.out.println("DB Entitlements :: " + ""
     + roleVo.getAttribute("DBEntitlements"));
   System.out.println("Unix Entitlements :: " + ""
     + roleVo.getAttribute("UnixWindows"));
   System.out.println("VPN :: " + "" + roleVo.getAttribute("VPN"));
} catch (SearchKeyNotUniqueException e) {
   e.printStackTrace();
} catch (NoSuchRoleException e) {
   e.printStackTrace();
} catch (RoleLookupException e) {
   e.printStackTrace();
} catch (AccessDeniedException e) {
   e.printStackTrace();
public void createRole() {
LOGGER.info(" in Create role ");
RoleManager roleManagerService = oimClient
    .getService(RoleManager.class);
HashMap<String, Object> roleCreationAttrMap = new HashMap<String, Object>();
roleCreationAttrMap.put(RoleManagerConstants.ROLE_NAME, "API Role1");
roleCreationAttrMap.put(RoleManagerConstants.ROLE_DESCRIPTION,
    "This Role is created using API Role1");
roleCreationAttrMap.put(RoleManagerConstants.ROLE_DISPLAY_NAME,
    "API Role1");
roleCreationAttrMap.put("ADentitlements", "API Role1 AD Entitlements");
roleCreationAttrMap.put("DBEntitlements", "API Role1 DB Entitlements");
roleCreationAttrMap.put("VPN", "No");
roleCreationAttrMap.put("UnixWindows", "API Role1 Unix Entitlements");
Role roleVo = new Role(roleCreationAttrMap);
try {
   System.out.println(" Before Create role *********************************************");
   roleManagerService.create(roleVo);
   System.out.println("Role Created .. ");
} catch (ValidationFailedException e) {
   e.printStackTrace();
} catch (RoleAlreadyExistsException e) {
   e.printStackTrace();
} catch (RoleCreateException e) {
   e.printStackTrace();
} catch (AccessDeniedException e) {
   e.printStackTrace();
public void modifyRole() {
LOGGER.info(" in modifyRole ");
RoleManager roleManagerService = oimClient
    .getService(RoleManager.class);
Role roleVo;
try {
   roleVo = roleManagerService.getDetails(
     RoleManagerConstants.ROLE_DISPLAY_NAME, "API Role1", null);
   String roleKey = roleVo.getEntityId();
   HashMap<String, Object> roleCreationAttrMap = new HashMap<String, Object>();
   roleCreationAttrMap.put("ADentitlements",
     "Updated API Role1 AD Entitlements");
   Set roleKeySet = new HashSet<String>();
   roleKeySet.add(roleKey);
   Role roleVoNew = new Role(roleCreationAttrMap);
   roleManagerService.modify(roleKeySet, roleVoNew);
   System.out.println("Role Modified ..");
} catch (SearchKeyNotUniqueException e) {
   e.printStackTrace();
} catch (NoSuchRoleException e) {
   e.printStackTrace();
} catch (RoleLookupException e) {
   e.printStackTrace();
} catch (AccessDeniedException e) {
   e.printStackTrace();
} catch (ValidationFailedException e) {
   e.printStackTrace();
} catch (RoleModifyException e) {
   e.printStackTrace();
public static void main(String args[]) {
CreateRole miscObj = new CreateRole();
miscObj.connectToOIM();
miscObj.createRole();
//miscObj.readRoleMetadata();
Thanks In Advance .

Looking for best way to filter status or meter data from differently formatted text.

With the product we design we are able to communicate via RS-232 ports. What I'm trying to do is filter out the data that is given by multiple differnt types of products that will give similar data back, but in a differnt format. Such that in a status command I'm looking for everything to be in a non failed state. But some items will show warning, failure, #.##w(for warning), or #.##f (for fail). But the format of each product is different. Also for a meter command I'm looking for a way to filter out just the numeric value for each phase amplitude, but once again the format will be different for each product. I have been able to pull this data out easy enough for an individual product but not on a wide product range with the same VI.

"Service is not available at this time
Try back later"
Bye...
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Can we relink the executables for a particular schema using adadmin utility

Is it possible to do the following tasks for a particular schema (say inv):
1. Relink the executables for INV schema using adadmin utility.
2. Regenerate the forms for INV schema using adadmin utility.
3. Check if there are any invalid objects in the database where the issue is replicated INV schema.
Thanks,
Vijay

Hi,
Is it possible to do the following tasks for a particular schema (say inv):
1. Relink the executables for INV schema using adadmin utility.
2. Regenerate the forms for INV schema using adadmin utility.Yes, it is possible for specific schema -- See (Note: 141118.1 - How To Relink Forms Library Files Using Adadmin) for details.
3. Check if there are any invalid objects in the database where the issue is replicated INV schema.Through adadmin, it is not possible for specific schema. To check the list of invalid objects under the INV schema, you need to run this query:
SQL> select object_name, object_type
from dba_objects
where status = 'INVALID' and owner = 'INV';Regards,
Hussein

Cannot repair disk errors for OSX boot volume using Disk Utility while booted from different disk

Similar Messages

Maybe you are looking for