Cannot repair Equium L350D with Vista
when i try to repair my computer i get an error message saying the programs not installed
help
Are you able to recover the notebook using the Recovery disk?
Did you create the Recovery disk before this issue happened?
According to your last message the notebook is not able to start the HDD recovery procedure. Possibly there is something wrong with the recovery partition who knows.
If you didnt create the Recovery disk and are not able to start the Windows Vista then you could order a new recovery disk from here:
https://backupmedia.toshiba.eu/landing.aspx
Then you can boot from this disk in order to install the Vista again
Similar Messages
-
Equium L350D with Vista wont go into sleep mode
Equium L350D with Vista wont go into sleep mode i just reinstalled windows and sleep was working but now the screen just goes off but its clearly not on standbye
please help>i figured it out
Can you please tell us how? -
Cannot see files burned with Vista
I burned some photos to a DVD using Windows Vista, but I cannot see them in Finder. All I see in Finder is a "Recordable DVD" with nothing in it. If I do "Get Info" I see the following:
General:
Kind: Folder
Size: Zero KB on disk (Zero bytes)
Name & Extension:
Untitled DVD.fpbf
Burning:
Device: HL-DT-ST DVDRW GSA-S10N
Media capacity: 4.37 GB
Content size: 1.3 MB (i.e. the photos are there! somewhere ...)
Now, "Disk Utility" shows the following info:
Name : HL-DT-ST DVDRW GSA-S10N
Type : Disk
Disk Identifier : disk1
Media Name : HL-DT-ST DVDRW GSA-S10N Media
Media Type : DVDROM
Connection Bus : ATA
Connection Type : Internal
Connection ID : Device 0
Device Tree : /PCI0@0/PATA@1F,1/PRID@0/@0:0
Locked : Yes
Writable : No
Ejectable : Yes
Mac OS 9 Drivers Installed : No
DVDROM : Yes
Optical Media Type : DVD+R
Device Type : CD-ROM, CD-R, CD-RW, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW
Location : Internal
Total Capacity : 4.4 GB (4,700,372,992 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Any ideas of how to solve this?
Thanks!I have a similar problem with CD's created with Vista, but if the preferences are set correctly in Vista, compatible CD's and DVD's can be created.
Following is from Microsoft:
http://windowshelp.microsoft.com/Windows/en-US/Help/2af64e60-60aa-4d79-ab6c-3a5d b5806cbe1033.mspx
Understanding the difference between the Live File System and Mastered disc formats
If you have burned CDs using Windows XP, you are already familiar with the Mastered format. The latest version of Windows offers a new format, called Live File System. Discs that use the Live File System format are often more convenient because you can copy selected files immediately and as often as you want, as if the disc were a floppy disc or USB flash drive. On the other hand, Live File System discs can’t be used in all computers and devices. Use this guide to understand the difference between Live File System and Mastered discs:
Discs formatted with the Live File System option:
• Work like a USB flash drive or floppy disk, meaning you can copy files to disc immediately without having to burn them.
• Are convenient if you want to keep a disc in the burn drive and copy files whenever the need arises.
• Are only compatible with Windows XP and later versions of Windows.
Discs formatted with the Mastered option:
• Don’t copy files immediately, meaning you need to select the entire collection of files that you want to copy to the disc, and then burn them all at once.
• Are convenient if you want to burn a large collection of files, such as a music CD.
• Are compatible with older computers and devices such as CD players and DVD players
Why are there different versions of the Live File System format?
Each version of the Live File System format is compatible with different operating systems. Depending on which computers you plan to use a disc in, you might need to select a different version of Live File System. If you plan to use your disc on the latest version of Windows, however, you will never need to change the version of Live File System you use. If you need to make discs that are compatible with earlier versions of Windows, use the table below to select the right Live File System version for your needs:
The following table describes Live File System versions and their appropriate uses.
Live File System version Best for
1.02
This format can be read on Windows 98 as well as many Apple computers. You should use this version if you need to format DVD-RAM or MO (Magneto-optical) discs.
1.5
This format is compatible with Windows 2000, Windows XP, and Windows Server 2003. It might not be compatible with Windows 98 or Apple computers.
2.01
This format is compatible with Windows XP and Windows Server 2003. It might not compatible with Windows 98, Windows 2000, or Apple computers.
2.5
This format is designed for the latest version of Windows and might not be compatible with earlier versions of Windows. -
Cannot open executable files with Vista
Under Vista, what issues are known that would interfere with
help.chm opening an executable file?Hi Colum
Hopefully you will pardon my unsolicited intrusion.
If it's a .EXE file, that's being opened, it's most likely
Captivate. But Adobe does have other applications that create
video. For example, Visual Communicator (my new favorite toy
I say this because Captivate produces as one of its formats,
.EXE output. So I'm doubtful Brook21679 is actually opening the
Captivate application itself. More likely, just the .EXE that
Captivate created.
Brook21679, I've seen similar behavior with Vista. You may
wish to try placing the .EXE and .CHM in a different folder than
where it currently is. I use both XP Pro and Vista. I've seen all
sorts of weirdness with Vista as related to opening files. This
whole new security model seems to be causing grief. At least for
me. I don't have my Vista booted up at the moment, but you might
also try right-clicking the .EXE and see if there are any
permissions that can be set.
Cheers all... Rick -
PC60G WLAN card, cannot use MSI utility with Vista
I think I accidentally installed Windows Vista's own drivers, and now the MSI Configuration Utility cannot find the wireless access point.
Steps to repeat:
Launch the utility from the notification area
Select the Site Survey tab
After a few seconds the status shows "Disconnected"
After a few more seconds the Rescan button is enabled
No network device is in the table
I have done System Restore to the point before I installed anyting. The Windows wizard detected new hardware again (I cancelled it).
I have installed the latest MSI drivers for Vista 32 bit, 2.0.3.0.
Still the MSI utility cannot connect.
Win XP has a check box to disable Windows from managing the wireless connection, but I have been unable to find this function in Vista. Does anybody know where it is?
I am able to connect to the access point using Vista's built-in support.
Is it worth the trouble to try to disable Windows' management? Are there features in the MSI utility that I am missing out on? If not, can I uninstall the MSI utility (to get rid of the notification icon) without compromising the network card?Well i'm using the same card under vista .. and the MSI utility isnt working for me either... but my advice .. vista's utility is better .. no need to use msi's one ... and if you want to disable it .. as i know .. in the installing CD .. when you install the driver you have 2 options to choose.... Performance .. or WiFi (as i remember) choose performance.
-
Cannot even START HotSync with Vista
Hello, I hope somebody can help me here...
I've bought a Palm Pre Plus a few days ago and since tried to synchronise it with my laptop.
I installed the newest Palm Desktop software and connected the phone via USB.
After installing everything I get a window asking me to connect the phone and press a "HotSync button" of some sort... but there is no press-able button on either the phone or the cable that works.
When I connect the phone it asks whether I want to just charge the phone or use the USB connection. If I choose the latter I can drag-n-drop stuff onto the phone (wallpapers & ringtones) but that's it.
Does anybody know what I should do? I have no idea what I did wrong or forgot to do...
Thank you very much!!
Post relates to: Pre Plus p100ueu (02)With the Palm Pre, it does not "hotsync" like the previous Palm devices did. There is no native desktop sync. option.
With the PRE, you sync your data to an on-line service like the Palm profile, Google, Yahoo, Facebook, etc. With the Palm Profile, you only have access to the data on the device. There is no option to view the profile data on a PC.
There is a tool that Palm offers that will transfer your current data that is in Outlook or Palm desktop to the PRE and an on-line service. The tool is the Data Transfer Assistant. Go to Palm.com/dta to get the tool.
If you want to sync to Palm desktop or Outlook on your PC, you will need to use a 3rd party solution like Companion Link or the Chapura products Pocket Mirror for Outlook or Echo for Palm Desktop. -
Cannot get QuickTime working with Vista due to Export Controller.
I have downloaded the latest version of ITunes and Quick Time. ITunes works fine, but when I click on the QuickTime icon I get the Windows message "Export Controller not Working." Yesterday QuickTime would load after about 30 seconds, but now it does not load at all. Today I have uninstalled QuickTime and re-installed it. However, I am still getting the message "Export Controller not working." QuickTime appears in the task bar, but when I try clicking on it it will not open. I do not want to uninstall ITunes because it is working okay, and my family have a lot of music downloaded on it. I am not at all technical, and I would appreciate any help that anyone can give to resolve this problem with QuickTime. I note that there is a previous question on this topic that remains unanswered.
There is obviously still a problem somewhere as I am still getting the Export Controller message, but I am very appreciative for your help. What is Export Controller, and do you have any idea why it is not working properly?
What i presume the Export Controller is ... is part of the machinery that allows QuickTime Pro to export movies to other formats. Although you only get that functionality in QuickTime Pro, it's built in to the QuickTime player (basically, to get QuickTime Pro, you buy a "QuickTime Pro Key" which unlocks all the movie editing capabilities of the Player.)
As to what is causing it ... well I've come across a possible lead off in another thread.
Over here, DevilQc is getting an Export Controller error, but he's also getting a message about his CoreFoundation.dll:
http://discussions.apple.com/thread.jspa?messageID=10304475�
CoreFoundation.dll is part of Apple Application Support (which is a seperate program from QuickTime, but is required for the latest versions of QuickTime to run). If Apple Application Support is missing or damaged, usually QuickTime (and iTunes) won't start *at all.* But it's possible that if you've got some sort of subtle damage to your Apple Application Support, QuickTime might run with an error message.
So I'm thinking that the next thing we should try is swapping out your Apple Application Support. Unfortunately, the easiest way to do that is by uninstalling Apple Application Support and QuickTime and then reinstalling QuickTime, so we'll have to go through that rigmarole again.
Follow the instructions I posted last time for the QuickTime uninstall/reinstall (no need to download a fresh copy of the QuickTime installer though ... the one you downloaded last time should do the trick), with the following additions:
*When you are in the "Uninstall a Program" Control panel:* Also uninstall Apple Application Support.
*When you are in the \Program files\ directory clearing away any leftover program files or folders:* Open the "Common Files" folder. Right-click the "Apple" folder and select Delete and choose Yes when asked to confirm the deletion. (Note: This folder may have already been deleted if Apple Application Support was successfully removed using Uninstall a Program earlier.)
The QuickTime reinstall should then also reinstall Apple Application Support. With a fresh copy of Apple Application Support in place, do you still get the Export Controller error message? -
Cannot download flash player with vista
can someone help please
the download just doesnt go past a few kbs
any fix?Hi mp2202,
Please download the executable version from here:
http://www.adobe.com/go/tn_19166
It’s about ½ down the page -
AMD CPU with Vista cannot connect to WLAN using MS-PEAP with WEP-128
We have a notebook "HP Pavilion tx1000 (AMD Turion64 CPU with Vista 32bits)". The notebook is using Broadcom 802.11a/b/g chipset, running AMD and Vista. It cannot associate to WLAN using MS-PEAP and WEP-128. Also, it cannot associate to PEAP and WPA2-AES.
The AP's log shows:
Oct 11 15:35:20 CCT: %DOT11-7-AUTH_FAILED: Station xxxx.xxx.xxxx Authentication failed
The ACS's log shows:
"EAP-TLS or PEAP authentication failed during SSL handshake"
We do not validate the certificate in the wireless setup. Vista's WLAN AutoConfig is used to configure the wireless profile. We are running Autonomous AP with Switch-Based WDS (WLSM).
We have no issue with Intel Centrino on the above authentication and encryption scheme.
Have checked the CCX program, broadcom 802.11a/b/g chipset is supported only for windows 2000 and xp. There is no mentioning about support for vista. Could this be a compatibility issue?
Please advise and thksMaybe look at this post: http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=WLAN%20Radio%20Standards&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddf9be9/5#selected_message
-
Cannot Install windows 7 or Vista on HP DC5800 with VL Media
Hello all,
I have a fleet of HP DC5800 SFF PC's that have been running XP Pro for some time. I successfully installed windows 7 on one of them, but none of the other PC's I have of this model will take the install. After performing a clean install, the pc will reboot and then hang on the windows 7 logo during startup. I've updated the bios to the latest version. I've unplugged and disabled everything in the BIOS, cleared the BIOS, amongst a number of other things. Is there a known issue with this model?? With Vista install, it goes through the install, then says something along the lines that I can't reboot the system to continue the install. I also tried windows 8.1, which at the end of the install says that the installation file is corrupt.....Hello buccy3,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with upgrading the operating system on the HP Compaq dc5800 Business Desktop PC. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Equium A110-276: multimedia buttons do not work with Vista
How to reinstall the software of the multimedia buttons at the right side of the laptop in Windows Vista? becuase when I install windows vista the buttons doesn't work anymore.. multimdia buttons: the WMPlayer, play/pause, stop, next and previous buttons... a nyonw got a software or got the same problem?
Hello
I have checked Vista download page and your notebook A110 (PSAB2) is not listed there. Usually you need Toshiba controls but with Vista this tool is not available separately. I presume it is a part of Value Added Package.
Have you already installed anything downloaded from Toshiba download page http://pc-support.toshiba-europe.com/vista/ ? -
Treo 755p cannot sync with Vista and old Treo 650
Have spent 4 hours with Palm chat analyst. Have downloaded several different applications from their site at their direction. Now I cannot download my old info/cannot sync old info with new Treo and completely frustrated.
Post relates to: Treo 755p (Verizon)you were given a service request # from chat right!! pls call voice support for help!
Post relates to: Treo 650 (Unlocked GSM) -
Satellite A200-1vp with Vista - CD/DVD drive failure code 39
Hi,
I have been burning and watching DVDs on my Satellite A200-1vp, with vista, since February, the last time I burned anything was a couple of weeks ago.
Suddenly there's a problem, no response when I load a disc and my divx player tells me no recorder found.
When I search in the device manager I get the message " windows cannot load the driver for this hardware" (code 39) " driver is corrupted or missing".
I tried uninstalling it and using the Toshiba upper/lower limit filter repair tool but on restart it still failed to install.
Should i try the Toshiba Recovery Disc and loose a lot of unbacked up programs/files, as last resort?
Would that work?
Anybody got any ideas?Here is an interesting Microsoft knowledge article:
http://support.microsoft.com/kb/270008/en-us
You should firstly access the device manager and should remove the CD/DVD drive from the device list.
Then should access the registry and should remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and check if the CD/DVD drive would work again! -
Cannot repair or erase external hard drive
I recently purchased a Transcend 1TB harddrive and partitioned it in two. One of those partitions can no longer be mounted. I cannot repair the disk or erase it. I would be happy if I could completely erase the whole hard drive and start from scratch. Can anyone offer any suggestions? The output from diskutil verifyVolume is
Started file system verification on disk4 James_TM
Checking storage system
Checking volume
disk3s2: Scan for Volume Headers
disk3s2: Scan for Disk Labels
Logical Volume Group 02004E72-5803-4B70-9E9C-63F6A68AEAA0 on 1 device
disk3s2: Scan for Metadata Volume
Logical Volume Group has a 16 MB Metadata Volume with double redundancy
Start scanning metadata for a valid checkpoint
Load and verify Segment Headers
Load and verify Checkpoint Payload
Load and verify Transaction Segment
Incorporate 0 newer non-checkpoint transactions
Load and verify Virtual Address Table
Load and verify Segment Usage Table
Load and verify Metadata Superblock
Load and verify Logical Volumes B-Trees
Logical Volume Group contains 1 Logical Volume
Load and verify 606252CC-9C2B-4006-BFE4-494D5CA8E592
Load and verify B379F48C-BD07-4702-AE92-D4E36BC031E7
Load and verify Freespace Summary
Load and verify Block Accounting
Load and verify Live Virtual Addresses
Newest transaction commit checkpoint is valid
Load and verify Segment Cleaning
The volume 02004E72-5803-4B70-9E9C-63F6A68AEAA0 appears to be OK
Checking file system
Error: -69845: File system verify or repair failed
Underlying error: 8: POSIX reports: Exec format error]/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *64.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 63.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *750.2 GB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Mac HD 749.8 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Mac SSD *62.8 GB disk2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk3
1: EFI EFI 209.7 MB disk3s1
2: Apple_CoreStorage 667.0 GB disk3s2
3: Apple_Boot Boot OS X 134.2 MB disk3s3
4: Apple_CoreStorage 332.7 GB disk3s4
5: Apple_Boot Boot OS X 134.2 MB disk3s5
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Sonam_TM *332.4 GB disk4
/dev/disk5
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS James_TM *666.7 GB disk5 -
Problem with Photostream on a PC with VISTA
Problem with Photostream on a PC with VISTA
I have latest Vista SP installed. I installed the download for ICloud for Vista Control Panel. I followed Apple's instructions and am unable when I snap a picture to have it downloaded on my PC to the default directories.
I have done a iCloud backup a couple of times.
I have changed the directory destinations, turned off my firewall, and still not getting the pics on my PC.
Help is appreciated. Thanks..Well, the problem has been partially solved. When using the free Camera Plus app, all works as it should. All pics that I take download successfully.
Does this mean that the the Apple Camera app is defective?
How do you fix this app, cannot be deleted on the IPOD.
Maybe you are looking for
-
Payment medium program for MT103 format
Hi, We had a requirement of generating MT013 format from automatic payment program and we are on ECC 5.0 Version. I have tried generating with program RFFOM100, but unable to meet all the requirement for HSBC bank, UK. I have another program RU_MT103
-
Inbound Idoc - control record settings
Hi, we have a JDBC to Idoc scenario. We get data from JDBC interface (outbound), map some fields and send it to a receiver SAP system as an Idoc (inbound). We did a similar scenario before and PI filled out automatically the control record settings.
-
Integrating web services with BW
hi BW Gurus, We are working on Netweaver 2004 and BW 3.5 and u r requirement is to extract data from web service to BW and the web service is built based on J2EE. I need a step to step guidance of how we can integrate a web service to the BW In this
-
2 TB external hard drives (SeaGate GoFlex Free Agent) were formatted in NFTS to store movies over 4 GB so that I can transfer to PC's. I downloaded camcorder movies in .mts files to this iMac and later transferred to my external hard drives. I am n
-
AE CS4, not getting option to render to mp4 from the format option?
I had CS3 and I was able to do it but now with CS4 I only get options like FLV, Quicktime, Windows Media, Media Player but I don't see that option of H24 as I had on CS3. Do you guys know how to fix that issue please? I am at work other wise I will