Cannot replicate a datasource in BW, System asks for deletion

Hi All,
When I ask for "Replicate Datasources" in our BW system after an upgrade of R/3, it displays the "Deletion of Datasources" window specifying if we would want to delete the datasource since it cannot be replicated.
In what circumstances, do we get this message ?
Is that because BW is seeing new datasources in R/3 which has not been activated ? Then, why would the BW see the new datasources even if they are not active.
Is it safe to say YES to delete all the datasources that cannot be replicated ?
Thanks,
Alain

Hi Alain,
as explained in the OSS Note 589361 'Deleting DataSources in BW during replication',
"DataSources that cannot be found (perhaps only temporarily) when a certain component is being replicated are considered obsolete and are deleted...".
So, probably your upgrade process in R/3 deleted some datasource in your source system (no longer in use or no more supported or no more active and available only in D version...).
Try to verify that every datasource used by you is still in RSA6 in R/3...then click YES, I think with no problem...
Hope it helps!
Bye,
ROberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

Similar Messages

  • System ask for a transport request while maintain IT0002

    I'm getting strange message while maintaining IT0002 i.e system ask for a transport request. But while maintaining IT0008 or IT0009 etc it's not asking transport request. So while Diagnosis it is giving
    Active integration to Organizational Management means that when a link to Organizational Management is created, it is saved automatically.
    When saving organizational data, the data must be written to a transport request because, for example, the automatic transport recording is active. Without a correction request, the relevant changes in Organizational Management cannot be saved.

    Check the Tcode OOCR how the swich is active or not
    later check with ur basis Guy once

  • HT4061 I cannot access my I Pad it is asking for a passcode, I  did not set one, so a code has been created and i need to have it reset

    I cannot access my Ipad. It is asking for a passcode, I did not set one.  How do I reset this so that I can log onto my Ipad?

    Hey dmplinton518,
    You'll want to follow the directions in here:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    Sincerely,
    Delgadoh

  • I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller  said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

  • HT3775 I can not open a video movie clip, the system ask for a codec, how can a set up that automatlicly

    I can not open a video movie clip, the system ask for a codec, how can a set up automatlicly?

    The problem was resolved a small manipulation - on stage Basic Configuration,
    point 3 "Configure CA Introscope"
    I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
    Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
    Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

  • Redeeming credit for iTunes store from gift card. system asking for security code and gift card thrown away.

    Redeeming credit from gift card for itunes. System asking for securitity code and gift card is thrown away.

    On the main iTunes store screen, click on Redeem on the right side.
    Put in the card number.
    It will ask to *Create new account* or *Use existing account*.
    If you do not have an account, select *Create new account*.
    You don't have to enter in a CC number. You cna if you want but it's not required.

  • System asking for storage location in case of Asset GR,

    dear all,
    In our case  system is asking for Storage Location in case of Asset GR, though PO was account assigned.
    I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
    Pls guide,
    Regards.

    Hi,
    Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
    Reg
    dheeraj

  • Cannot copy external hard disk as its asking for permissions

    Not sure why my settings have changed, but now every time I copy data onto my external drive main directory it asks for my password. I checked and seems that my current user is read and write setting (prssing command i.) I also notice that on a few folders I can copy directly without the prompt.
    How do I set it so that it no longer asks me this? I have automatic backup software which now doesn't work due to this issue.

    Hi JPOlas,
    Do you attempt to backup SQL Server to a network shared folder?  If that is the case, please make sure that you have configured with the steps below before backup:
    • Create a network share from the remote server.
    • Provide Full privilege for the SQL Server account to read and write data to the share. For more information:
    Configuring SQL Server service account security for network resources access.
    In addition, please note that the time of SQL Server backup is directly proportional to network bandwidth. And the increased I/O activity has the potential for a negative impact on performance and your system availability.
    There are other ways you can workaround this issue, please take a look at this article on
    How to Backup SQL Server to a Network Shared Folder.
    Best Regards,
    Stephanie Lv

  • HT1430 I cannot get yahoo mail.  The message asked for password for yahoo many times.

    In order to use Yahoo! Mail, please turn Private Browsing off. Please go to Settings » Safari » Private Browsing, and turn it off
    I cannot get yahoo mail nor send email on iPad 3.  I have OS 6 just upgraded.  It keeps on asking for password.  I think my yahoo email was also hacked to compound the problem.  Please help.

    I get this warning now To. Never saw it in last 5 years and 4 iPhones. Cannot get yahoo small biz email access anymore via iPhone on safari web login because of this same warning. Typically , either yahoo or apple screwed up and changed something that effects millions and think nothing of it. (battery gate in all the iPhone 4/4s comes to mind here)
    As you can tell I "used" to be an apple fan but after this iPhone 4s dies (prematureally of course) I will be getting my first android phone and see flash and the rest of the hidden Internet that apple kept from myself the paying customer.

  • System ask for recursive BOM

    To SAP GURU,
    I have 1 problem in master ecipre .I have  halb( SFG-1 ) which is having 2 halbs ( SFG-2 & SFG-3 ). Again  this 2 halb is having their multilevel bom .respectvely .SFG-2 is having co product ( Co po -1 ) which is again input in SFG-1 .
    Now when i am saving recipe of SFG-1 system ask me that SFG-2 mat code is recursive & for also co product system ask me about recursive .Now unless & untill i will click on recursive allowed system dont allow me to save the recipe .Even if i saved recipe by clicking on recursive allowed in mrp run system not explode the BOM of SFG-2 .
    Only when header material is used in bom compnent then only bom will be recursive but in my case even if i have not used header material in any of my bom component  still system ask me abaut recursive ..So can u tell me is i am missing some where or some solution is their Now i am trying to solvr it by SAP notwes 161742.( Or any latest SAP note is available )
    Please tell me is their any valid solution .
    SANIL

    Sanil,
    what ever you mentioned is true , the only problem you are facing error is related to BOM level.
    SFG-2 and its co product ( Co po -1 ) you are putting in same BOM level ( ie in the BOM of SFG-1 )thats why you are getting this error.
    as Co Po-1 will be produced after the production of SFG-2 so it can be at lower level where SFG-2 is maintained.
    Think on it , its logiocaly correct , your co product can be produced before your main product.
    Check out and revert back.
    Regards
    Ritesh

  • The system ask for keychain password every few minutes

    hi, if somebody can help me, please. The system ask me for a keychain password every few minutes, what i need to do?

    Hello Mduque45
    Try repairing or resetting your Keychain by following the steps in the article below to resolve the issue with the repeated prompts to enter in the password.
    Resetting your keychain in Mac OS X
    http://support.apple.com/kb/ts1544
    Regards,
    -Norm G.

  • Help: system asking for subscription or credit, bu...

    system is asking for a subscription or to buy credit. I have already paid for a 3 month subscription
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    Hi Rachel,
    Please refer to the following link http://forums.adobe.com/message/6009549#6009549
    Regards,
    Aish

  • System Asks for password

    Hello,
    I'm running Mavericks and the system asks me for password to weather creating or deleting a folder on the top level of the HD.
    That doesn't happen on the desktop or user folder or any other drive, only inside of the the HD main level.
    I got info of the HD and it does not have my user name listed. I went to the user account preferences and my user name is listed as administrator.
    Is this a normal? I have repaired permissions and used the terminal to reset ACL for my user name.
    Thanks in advance

    Normal. You shouldn't use that area for file storage. Use your home folder or the Shared folder in Users.

  • I purchased some songs under a different e-mail address and now i cannot remember the password and cannot listen to the album as it asks for the password to the old e-mail account, what do i do?

    I purchased music from iTunes some time ago under a different e-mail account, i cannot now listen to this album as it says the computer is not authorised and it asks for the password of the old account which i cannot remember, what do i do to listen to this album?

    Hello mdfdm58,
    The following article provides the steps necessary for resetting the password to the old Apple ID.
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Cheers,
    Allen

  • [Solved] System asks for encryption password multiple times

    Hey guys,
    I have following problem:
    I am using dmcrypt for encryption of my hard drive but it seems like I have made a mistake when I installed it. But for the most time I ignored it.
    When I start my system it ask for the encryption password normally. The strange thing is that it also asks for the Password when services start.
    If I issue a command with systemctl start XXX I also get following message:
    Please enter passphrase for disk Crucial_CTXXXXXSSD1 (lukslvm)
    There is no problem if I just press Enter and go on actually but this still bugs me.
    I wonder what I did wrong at that time.
    Edit:
    /etc/crypttab:
    lukslvm UUID=xxxxxxxxxxx------xxxxxxxxxx none luks
    lvm pvscan:
    PV /dev/mapper/vgarch   VG vgarch   lvm2 [223,38 GiB / 0    free]
      Total: 1 [223,38 GiB] / in use: 1 [223,38 GiB] / in no VG: 0 [0   ]
    Last edited by Erhan (2014-12-17 12:45:53)

    Fixed by removing the entry in /etc/crypttab
    I don't even remember adding it there but it has been already some years.

Maybe you are looking for