Cannot reset/refresh Asus Transformer 2in1 laptop, What now ?

Sorry for a little venting right now, but I must.This week I set out to buying a laptop for work since I primarily use a tablet and desktops. I wanted to buy one with decent graphics and a nice screen and set a budget of 1600. The key purpose here was to get it by the release of windows 10 and I was buying last weekend. Due to the fact that we use Dell at my work, and they have a price match guarantee I was set on buying a Dell. My experience was awful.So their guarantee states they will price match a similarly equip Lenovo or HP, I went to Lenovo and HP and configured a 'gaming laptop' at both for 1500. Of course they Dell counterpart from alienware was around 2200, so I contacted sales and showed them the offer and configuration. But, to my limited surprise they would not price match since HP and Lenovo use a 4720HQ i7 and Dell uses...

Hi All,I require to reset (or at least) the Windows 8.1 O.S in the Asus Transformer 2in1 (Windows 8.1 and Android Tablet).1. I have tried to reset then I got following error :2. Then I have created Recovery Media (32GB USB Drive) by using internal media creator but the same error as above.3. At least thought to Refresh the Laptop, but getting another error*Recovery Partition is healthy.*Windows 8 was update to Windows 8.1 (there is no backup for Wins 8, probably this is the main cause)Query 1: Suggest for how to do resetting or refreshing the laptop with these errors ?
Query 2: In least case, I want to format by using some Windows 8 Trial DVD and to activate, but for preloaded O.S, don't know how to get the license things like product key from laptop and I am afraid that I will loose the Original License. Any guidance to do so ?Thanks...

Similar Messages

I'm now showing I have 9 updates in the App Store but when I click on updates it is blank and won't load. Tried to reset but didn't help. What now?

I'm now showing I have 9 updates in the App Store but when I click on updates it is blank and won't load. Tried to reset but didn't help. What now?

Try again later today or tomorrow. Other users are posting the same issue > Apps update not working. Was before but...: Apple Support Communities
The problem has been reported to Apple.

TS1559 The fix to reset your wifi did not work. Still cannot connect my wifi or bluetooth. What now?

Wifi button was greyed out, tried the fix on this forum and it did not work. What now?

Make an appointment to have it serviced.

What is the deal with System Reset/Refresh in Windows 8.1?

Either this is a serious defect with the Windows Store-provided update for Windows 8.1 or Microsoft has done this intentionally but doing an update to Windows 8.1 from the Windows Store-provided service nukes your ability to use System Reset/Refresh.
It claims files are missing which means that the update erased the necessary reset files from the HDD but didn't replace them during the update with Windows 8.1 compatible equivalents.
I had to do a System Reset on one of my computers and I ended up having to get a Windows 8.1 ISO from a less than reputable source just to get my hands around the necessary missing file and now I can't even activate it with my Windows 8 Pro upgrade
key. None of this would have been a problem if I could just perform the System Reset in place on Windows 8.1 and reset it back to a neutral, clean Windows 8.1 installation.
I've since managed to find a way to do the install the way I needed to but can someone please give me some clarity on this subject so I don't have to go through all this again (as I've got two other computers that run a Windows Store-updated Windows 8.1
installation and at least one of them is probably due for its own System Refresh)? What can I do to refresh a valid Windows 8.1 installation if I need to?
EDIT: Oh, and one more thing: one of those computers is an OEM-installed Windows 8 copy that was subsequently upgraded to 8.1 yet it too suffers from the "missing files" error when a System Refresh/Reset is requested. What
am I supposed to do here if I want to do a System Refresh to this computer? Will the OEM key inside it activate if I go outside the operating system to install it anew?

C:\Program Files (x86)\NeoSmart Technologies\EasyBCD\bin>net start sppsvc
The Software Protection service is starting.
The Software Protection service could not be started.
A system error has occurred.
System error 5 has occurred.
Access is denied.
This is the error from running net start sppsvc in an elevated command prompt. Software Protection Service (sppsvc.exe) is getting an "access denied" error and code 0xC0000022. Ok, let me break it down for you... And this is with a fully
legit VL key that works on several PC in our school that are
First, you perform a System Refresh for what ever reason. After the Refresh, within a few minutes get the Windows version watermark in the lower left corner of your desktop that shows the windows version and build. Then after that
you get another watermark above the first watermark that says you need to activate by going to **Change PC Settings***. From there you are on the activation screen and its state with out doing anything...**Activation Error Description Not Found.**
When you click "Activate Now" nothing happens. You briefly see "checking this key" and then nothing.
This is where the above mentioned Software Protection service is failing. <--- Needs to be fixed.
Now at this point I cannot attempt to do an online activation because the sppsvc.exe is producing the 0xC0000022 error
I cannot do a phone activation because there is no installation ID...all the boxes are blank...because the sppsvc.exe is producing the 0xC0000022 error.
Oh, and I cannot re-type my product key because...you got it...because the sppsvc.exe is producing the 0xC0000022 error.....
The Software Protection service runs when I activate my PCs that are getting a "Clean" installs, Just to test the theory I did a refresh install on the "clean" installed pc and **VOILA** SAME ERROR....
Let me clarify that one of the PCs has a dual partition and a complete re-install of the OS will mean some extensive work fixing the bootloader as well. I have 150 PCs to refresh and this is what happened on the first one, then the 2nd. I am
running these on a TechNet VL and have never had these issues in the last 3 years.
Listen to these people. ALL are having the same issue. There has to be a process to fix it. As difficult as it may seem, some of us don't mind spending a few extra minutes running administrative tasks to fix this instead of re-installing.
That's the novice way to fix the issues and the most painstaking for those of us who work 12-to 14 hrs a day and don't have the time. We need this fixed. PLEASE PLEASE
Pretty please. Please take the time to take ownership of this issue and pioneer a real fix for the hundreds maybe thousands that are having or have had (broke down and did a "clean" install) this EXACT issue. Thank you so much for your help!!!!!

HT204053 I have a just purchased my first iPod touch and i cannot transfer my music from my laptop to the iPod. The sync button doesn't appear to work. What am i doing wrong? Please help this frustrated Grandma. I am trying to keep up with technology!

I have just purchased my first iPod touch and I cannot transfer my music from my laptop. The sync button does not appear to work. What have I done wrong? I am a grandma trying to keep up with technology please help.

Connect it to your computer and restore it as a new device. Then chose what music you want to sync with it and do so just like your Touch does.

I have an itunes gift card which I cannot redeem. I enter the code correctly and am prompted to sign in over and over again. I have tried resetting the iPhone but the laptop I had itunes on is broken, is there another way?

I have an itunes gift card which I cannot redeem. I enter the code correctly and am prompted to sign in over and over again. I have tried resetting the iPhone but the laptop I had itunes on is broken, is there another way?

See this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Good luck.

I tried to reset my apple password but the machine is telling me my old password is incorrect. So I restart my machine now I cannot log back in the systems. What should I do.

I tried to reset my apple password but the machine is telling me my old password is incorrect. So I restart my machine now I cannot log back in the systems. What should I do.

If you want to reset your Apple ID password, you can do it from this link: https://iforgot.apple.com/
If your old password is wrong even here, than use the Apple Support Lane that can be found right here: https://expresslane.apple.com/
Good luck.

I have an iPad that was setup on a laptop that has been reimaged. The iPad then had a password put on it and my kid doesn't rememer the password. Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default

I have an iPad that was setup on a laptop that has been reimaged. The iPad then had a password put on it and my kid who doesn't rememer the password. Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default. Any suggestions on how to reset to the iPad?
Thank you

Try recovery mode. I think this should work. You can read the instructions here.
http://support.apple.com/kb/ht4097

Asus Transformer book T200TA

Hello,
I'm trying to put an Archlinux on the Asus Transformer book T200TA, and I will share here my progress. I will take note of a lot of things, when I manage to do something or when something does not work. And if you have any ideas to make something works, tell me !
Current status (for TL;DR)
- Boot under archiso : Working with patch
- Boot Archlinux on the keyboard's HDD : Working by putting boot and efi partition on the internal memory
- Virtualization of Windows 8.1 under linux : Partially working only with a 64 bit linux as host
- SD card : Working with patch
- Graphics : Working
- Random freezes : Fixed ?. Didn't experienced any since my new installation with linux 4.0
- xhci_hcd bug at boot ; Work in USB2 mode only
- Backlight control : Working
- Sound : Work on both headphone and speakers in stereo but you have to edit an alsa config file for enabling sound on one or both output and for setting the sound level. Microphone not tested.
- Wifi : Not working
- Bluetooth : Not working: Not working
- Battery indicator : Working With kernell patch
- Touchpad : Partially working : Only one finger and very unpleasant because the cursor move a little before you click.
- Touchscreen : Partially working : Works randomly and seems to not release click when you remove your finger.
Sources
The T200TA has a lot on common with the T100TA, so, much of my fixes come from this computer (as it has been release one year before and the T200 is currently pretty new).
- http://www.jfwhome.com/2014/03/07/perfe … book-t100/
- https://github.com/AdamWill/baytrail-m
- https://bbs.archlinux.org/viewtopic.php?id=179948
Boot under archiso
If you try to boot, it will not work. Because, as T100, it search only for 32bit efi (even if the cpu can handle 64bit OS). You can do like him.
Or you can do like me, I think it's easier, but really dirty (it's not a full script, execute it only part by part) :
## Create working directory
mkdir work
cd work
## Build grub and get missing bootloader files bootia32.efi
git clone git://git.savannah.gnu.org/grub.git
cd grub
./autogen.sh
export EFI_ARCH=i386
./configure --with-platform=efi --target=${EFI_ARCH} --program-prefix=""
make
cd grub-core
../grub-mkimage -d . -o bootia32.efi -O i386-efi -p /boot/grub ntfs hfs appleldr boot cat efi_gop efi_uga elf fat hfsplus iso9660 linux keylayouts memdisk minicmd part_apple ext2 extcmd xfs xnu part_bsd part_gpt search search_fs_file chain btrfs loadbios loadenv lvm minix minix2 reiserfs memrw mmap msdospart scsi loopback normal configfile gzio all_video efi_gop efi_uga gfxterm gettext echo boot chain eval
cp bootia32.efi ../../bootia32.efi
cd ../../
rm -r grub
##Get all file from the current archlinux install iso
#Search and replace all XXXX.XX.XX by the current release date and /dev/sdX by your usb key address. If you find a way to extract both partion from iso without dd, it should be faster than that, so tell me if you know how to do that.
dd bs=4M if="archlinux-XXXX.XX.XX-dual.iso" of=/dev/sdX
mkdir usb
mkdir newiso
# Unplug and replug your usb key and wait a little if mount doens't work :
mount /dev/sdX2 ./usb
cp -r usb/* newiso/
sync
umount usb
mount /dev/sdX1 ./usb
cp -r usb/* newiso/
sync
umount usb
rmdir usb
## Prepare new usb key content
mv bootia32.efi newiso/EFI/boot/
mkdir -p newiso/boot/grub
echo "
menuentry 'Arch Linux i686'{
echo 'Loading Linux core repo kernel ...'
linux /arch/boot/i686/vmlinuz nomodeset archisobasedir=arch archisolabel=ARCHISO
echo 'Loading initial ramdisk ...'
initrd /arch/boot/i686/archiso.img
menuentry 'Arch Linux x86_64'{
echo 'Loading Linux core repo kernel ...'
linux /arch/boot/x86_64/vmlinuz nomodeset archisobasedir=arch archisolabel=ARCHISO
echo 'Loading initial ramdisk ...'
initrd /arch/boot/x86_64/archiso.img
}" > newiso/boot/grub/grub.cfg
## Prepare the usb key partition
gdisk /dev/sdX
3 # Create blank GPT
o # Create a new empty GPT
y # Proceed
n # New partition
# Default partition number
# Default first sector
# Default last sector
EF00 # Bootable efi partition
c # change partion's name
ARCHISO
w # Write modifications on the disk
Y # Proceed
mkfs.fat -F 32 /dev/sdX1
echo mtools_skip_check=1 >> ~/.mtoolsrc
mlabel -i /dev/sdX1 -s ::ARCHISO
rm ~/.mtoolsrc
## Copy files to the usb key
mkdir usb
mount /dev/sdX1 usb
cp -r newiso/* usb/
sync
umount usb
rmdir usb
## Cleaning
cd ../
rm -r work
A better way of fixing that should be building a x86 version of the file `PreLoader` from the repo `git://git.kernel.org/pub/scm/linux/kernel/git/jejb/efitools.git` because this file is renamed as `bootx64.efi` during the archiso creation, and the missing file is the x86 equivalent : `bootia32.efi`. Anyway, I didn't manage to build it, so I gave up this path. Tell me if you find something better.
Boot Archlinux on the keyboard's HDD
I cannot currently use this computer under linux for everyday, but I need a linux to work or dev. And I have to admit that the windows UI is much better for touchscreen than any linux desktop that I tried. The internal memory is only 30GB. So I let Windows 8.1 on internal memory for "tablet mode" and linux on hard drive for "netbook mode".
I didn't find any way to make the computer boot to the hard drive (or the micro usb card of 64GB), the efi-bios don't see them (the HDD is pluged in usb 3.0, but even in USB 2.0 mode it does the same).
To make it work, you have to put the boot and efi partition on the internal memory :
- Create a boot parition (100mo ext2) on the internal memory or use the windows rescue partition (300mo, ntfs, ~86%used after grub and vmlinuz installation). And during your installation process, mount it at /boot (/dev/mmcblkpX)
- Use the windows EFI parition (100mo fat32) and mount it to /boot/efi (/dev/mmcblkpY)
- Then (re-)install linux (need internet connexion, wireless or no. Dont forget to start dhcpcd)
mount /dev/sdbZ /mnt # with /dev/sdbZ your keyboard's hdd root partition where linux will be installed
mkdir /mnt/boot
mount /dev/mmcblkpX /mnt/boot
mkdir /mnt/boot/efi
mount /dev/mmcblkpY /mnt/boot/efi
pacstrap /mnt/ base grub efibootmgr
genfstab -U -p /mnt >> /mnt/etc/fstab
- and install grub on partition
arch-chroot /mnt
grub-install --target=i386-efi --efi-directory=/boot/efi --bootloader-id=grub --recheck
- Edit /etc/grub.d/40_custom and add at the end :
if [ "${grub_platform}" == "efi" ]; then
menuentry "Microsoft Windows Vista/7/8/8.1 UEFI-GPT" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --fs-uuid --set=root --hint-bios=hd0,gptY --hint-efi=hd0,gptY --hint-baremetal=ahci0,gptY [fs_uuid]
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
fi
with gptY, the Y from /dev/mmcblkpY above (the efi partition)
and [hints_string] is gave by the command
grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
- Apply grub config
grub-mkconfig -o /boot/grub/grub.cfg
Now I can boot to "Windows Boot Manager" or "grub" from bios. But I choosed to have grub by default and then he ask me what I want.
Virtualization
What works :
- host Win32, guest linux32
- host win32, guest win32
- host linux32, guest linux32
- host linux64, guest win
What doesn't work:
- host linux32, guest win32
Windows 8.1 guest : With QEMU and Virtualbox, same problem during installation (or boot when already installed) we got a
Your PC needs to restart.
Please hold down the power button.
Error Code: 0x0000000A
Parameters:
0xFFFFFFE6
0x0000001F
0x00000000
0x8192BFAB
After 3min virtualbox said that a critical error happend and tell us to watch the log. But it seem useless because the bug happend after 7 seconds and nothing show up after 7 seconds.
SD Card
http://www.jfwhome.com/2014/03/07/perfect-ubuntu-or-other-linux-on-the-asus-transformer-book-t100/ wrote:
The SD card reader works with newer kernels, but the sdhci module needs some configuration. Create a new file:
sudo nano /etc/modprobe.d/sdhci.conf
Then add the following:
options sdhci debug_quirks=0x8000
ctrl-o then ctrl-x to save and exit, then:
sudo mkinitcpio -p linux
Graphics
2D and 3D accelerations are enabled with xf86-video-intel 2.99.917 and mesa 10.4 :
$ glxinfo | grep direct :(
direct rendering: Yes
GL_ARB_draw_elements_base_vertex, GL_ARB_draw_indirect,
GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multi_draw_indirect,
$ glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Bay Trail x86/MMX/SSE2
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.4.0
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 10.4.0
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 10.4.0
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.0
OpenGL ES profile extensions:
However firefox doens't enable 3D acceleration by default, you have to force it. To check if it use it, go to about:support
And this mean that, it doesn't support it :
GPU Accelerated Windows 0/1 Basic
To force it :
- Got to about:config
- Set layers.acceleration.force-enabled
- Set layers.offmainthreadcomposition.enabled to true
And restart firefox. Now you should have
GPU Accelerated Windows 1/1 OpenGL (OMTC)
Warning : 3D acceleration can make firefox more buggy, so try to disable it if you have problems.
source : http://askubuntu.com/questions/491750/f … in-firefox
Random freezes
After some minutes (last time after ~40minutes) the system freeze. I don't know if it's only graphical or not. This freeze seem to happend when the cpu/gpu has a lot to do.
I've done a clean install with default kernel 4.0 in may 2015, and since that, I didn't have any freeze.
xhci_hcd bug at boot
When I enable XHCI in bios, sometime, I get that
xhci_hcd 0000:00:14.0: Error while assigning device slot ID
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
usb usb1-port3: couldn't allocate usb_device
The port change randomly and when it is port3, I loose the keybard and mouse and I have to make a hard reebot.
To "fix" this, I disabled XHCI (wich mean USB3) from the bios.
Still happen with kernel 4.0
Sound
With the work of sid789. I manage to make sound work on Linux 4.0.
Save this file somewhere on your computer : asound.state
state.bytrt5640 {
#### General
# Level
control.1 {
iface MIXER
name 'DAC1 Playback Volume'
value.0 175 # Left volume
value.1 175 # right volume
comment {
access 'read write'
type INTEGER
count 2
range '0 - 175'
dbmin -65625
dbmax 0
dbvalue.0 0
dbvalue.1 0
# Disable both output Right
control.51 {
iface MIXER
name 'Stereo DAC MIXR DAC R1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable both Left speaker
control.54 {
iface MIXER
name 'Stereo DAC MIXL DAC L1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Channel to listen
control.21 {
iface MIXER
name 'DAC IF1 Data Switch'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Normal
item.1 Swap
item.2 'left copy to right'
item.3 'right copy to left'
# Enable
# Only 0 and 2 works
control.100 {
iface MIXER
name 'DAI select'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '1:1|2:2'
item.1 '1:2|2:1'
item.2 '1:1|2:1'
item.3 '1:2|2:2'
##### Speaker #####
#Enable
control.27 {
iface MIXER
name 'Speaker Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
#Change a little the volume..
control.19 {
iface MIXER
name 'Class D SPK Ratio Control'
value 10
comment {
access 'read write'
type ENUMERATED
count 1
item.0 '1.66x'
item.1 '1.83x'
item.2 '1.94x'
item.3 '2x'
item.4 '2.11x'
item.5 '2.22x'
item.6 '2.33x'
item.7 '2.44x'
item.8 '2.55x'
item.9 '2.66x'
item.10 '2.77x'
# Enable Left speaker
control.62 {
iface MIXER
name 'Speaker L Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right speaker
control.61 {
iface MIXER
name 'Speaker R Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right channel on right speaker
control.67 {
iface MIXER
name 'SPOR MIX DAC R1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right channel on left speaker
control.70 {
iface MIXER
name 'SPOL MIX DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
# Enable left channel
control.71 {
iface MIXER
name 'SPOL MIX DAC L1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
##### headphone #####
# Enable
control.24 {
iface MIXER
name 'Headphone Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
#Enable too
control.34 {
iface MIXER
name 'HPO MIX DAC1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable Left
control.98 {
iface MIXER
name 'DAC MIXL INF1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable Right
control.96 {
iface MIXER
name 'DAC MIXR INF1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable right
control.59 {
iface MIXER
name 'HP R Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Enable Left
control.60 {
iface MIXER
name 'HP L Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# Don't know what, but change something on headphone
control.58 {
iface MIXER
name 'DAC L2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 IF2
item.1 'Base L/R'
## Useless on output
control.2 {
iface MIXER
name 'Mono Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.11 {
iface MIXER
name 'Mono DAC Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 175'
dbmin -65625
dbmax 0
dbvalue.0 -1500
dbvalue.1 -1500
control.3 {
iface MIXER
name 'Speaker Channel Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.4 {
iface MIXER
name 'Speaker Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 39'
dbmin -4650
dbmax 1200
dbvalue.0 -900
dbvalue.1 -900
control.5 {
iface MIXER
name 'HP Channel Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.6 {
iface MIXER
name 'HP Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 39'
dbmin -4650
dbmax 1200
dbvalue.0 1200
dbvalue.1 1200
control.7 {
iface MIXER
name 'OUT Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.8 {
iface MIXER
name 'OUT Channel Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.9 {
iface MIXER
name 'OUT Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 39'
dbmin -4650
dbmax 1200
dbvalue.0 -1950
dbvalue.1 -1950
control.10 {
iface MIXER
name 'DAC2 Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.12 {
iface MIXER
name 'IN1 Boost'
value 8
comment {
access 'read write'
type INTEGER
count 1
range '0 - 8'
dbmin 0
dbmax 5200
dbvalue.0 3000
control.13 {
iface MIXER
name 'IN2 Boost'
value 8
comment {
access 'read write'
type INTEGER
count 1
range '0 - 8'
dbmin 0
dbmax 5200
dbvalue.0 3500
control.14 {
iface MIXER
name 'IN Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -300
dbvalue.1 -300
control.15 {
iface MIXER
name 'ADC Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.16 {
iface MIXER
name 'ADC Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -17625
dbmax 30000
dbvalue.0 28500
dbvalue.1 28500
control.17 {
iface MIXER
name 'Mono ADC Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -17625
dbmax 30000
dbvalue.0 27000
dbvalue.1 27000
control.18 {
iface MIXER
name 'ADC Boost Gain'
value.0 3
value.1 3
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 1200
dbvalue.1 1200
control.20 {
iface MIXER
name 'ADC IF1 Data Switch'
value 1
comment {
access 'read write'
type ENUMERATED
count 3
item.0 Normal
item.1 'left copy to right'
item.2 'right copy to left'
item.3 Swap
control.22 {
iface MIXER
name 'ADC IF2 Data Switch'
value 3
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Normal
item.1 'left copy to right'
item.2 'right copy to left'
item.3 Swap
control.23 {
iface MIXER
name 'DAC IF2 Data Switch'
value 1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Normal
item.1 'left copy to right'
item.2 'right copy to left'
item.3 Swap
control.25 {
iface MIXER
name 'Headset Mic Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.26 {
iface MIXER
name 'Internal Mic Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Mono MIX DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.29 {
iface MIXER
name 'Mono MIX DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface MIXER
name 'Mono MIX OUTVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.31 {
iface MIXER
name 'Mono MIX OUTVOL L Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.32 {
iface MIXER
name 'Mono MIX BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.33 {
iface MIXER
name 'HPO MIX DAC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.35 {
iface MIXER
name 'HPO MIX HPVOL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.36 {
iface MIXER
name 'OUT MIXR SPK MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.37 {
iface MIXER
name 'OUT MIXR BST2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.38 {
iface MIXER
name 'OUT MIXR BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.39 {
iface MIXER
name 'OUT MIXR INR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.40 {
iface MIXER
name 'OUT MIXR REC MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.41 {
iface MIXER
name 'OUT MIXR DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface MIXER
name 'OUT MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.43 {
iface MIXER
name 'OUT MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.44 {
iface MIXER
name 'OUT MIXL SPK MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.45 {
iface MIXER
name 'OUT MIXL BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.46 {
iface MIXER
name 'OUT MIXL INL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.47 {
iface MIXER
name 'OUT MIXL REC MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.48 {
iface MIXER
name 'OUT MIXL DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.49 {
iface MIXER
name 'OUT MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.50 {
iface MIXER
name 'OUT MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.52 {
iface MIXER
name 'Stereo DAC MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.53 {
iface MIXER
name 'Stereo DAC MIXR ANC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.55 {
iface MIXER
name 'Stereo DAC MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.56 {
iface MIXER
name 'Stereo DAC MIXL ANC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.57 {
iface MIXER
name 'DAC R2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 IF2
control.63 {
iface MIXER
name 'LOUT MIX DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.64 {
iface MIXER
name 'LOUT MIX DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.65 {
iface MIXER
name 'LOUT MIX OUTVOL L Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.66 {
iface MIXER
name 'LOUT MIX OUTVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.68 {
iface MIXER
name 'SPOR MIX SPKVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.69 {
iface MIXER
name 'SPOR MIX BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.72 {
iface MIXER
name 'SPOL MIX SPKVOL R Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.73 {
iface MIXER
name 'SPOL MIX SPKVOL L Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.74 {
iface MIXER
name 'SPOL MIX BST1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.75 {
iface MIXER
name 'SPK MIXR REC MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.76 {
iface MIXER
name 'SPK MIXR INR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.77 {
iface MIXER
name 'SPK MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.78 {
iface MIXER
name 'SPK MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.79 {
iface MIXER
name 'SPK MIXR OUT MIXR Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.80 {
iface MIXER
name 'SPK MIXL REC MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.81 {
iface MIXER
name 'SPK MIXL INL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.82 {
iface MIXER
name 'SPK MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.83 {
iface MIXER
name 'SPK MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.84 {
iface MIXER
name 'SPK MIXL OUT MIXL Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.85 {
iface MIXER
name 'DIG MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.86 {
iface MIXER
name 'DIG MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.87 {
iface MIXER
name 'DIG MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.88 {
iface MIXER
name 'DIG MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.89 {
iface MIXER
name 'Mono DAC MIXR DAC R1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.90 {
iface MIXER
name 'Mono DAC MIXR DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.91 {
iface MIXER
name 'Mono DAC MIXR DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.92 {
iface MIXER
name 'Mono DAC MIXL DAC L1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.93 {
iface MIXER
name 'Mono DAC MIXL DAC L2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.94 {
iface MIXER
name 'Mono DAC MIXL DAC R2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.95 {
iface MIXER
name 'DAC MIXR Stereo ADC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.97 {
iface MIXER
name 'DAC MIXL Stereo ADC Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.99 {
iface MIXER
name 'SDI select'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 IF1
item.1 IF2
control.101 {
iface MIXER
name 'Mono ADC MIXR ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.102 {
iface MIXER
name 'Mono ADC MIXR ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.103 {
iface MIXER
name 'Mono ADC MIXL ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.104 {
iface MIXER
name 'Mono ADC MIXL ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.105 {
iface MIXER
name 'Stereo ADC MIXR ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.106 {
iface MIXER
name 'Stereo ADC MIXR ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.107 {
iface MIXER
name 'Stereo ADC MIXL ADC1 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.108 {
iface MIXER
name 'Stereo ADC MIXL ADC2 Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.109 {
iface MIXER
name 'Mono ADC R2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'DMIC R1'
item.1 'DMIC R2'
item.2 'Mono DAC MIXR'
control.110 {
iface MIXER
name 'Mono ADC R1 Mux'
value 'Mono DAC MIXR'
comment {
access 'read write'
type ENUMERATED
count 0
item.0 'Mono DAC MIXR'
item.1 ADCR
control.111 {
iface MIXER
name 'Mono ADC L1 Mux'
value 1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'Mono DAC MIXL'
item.1 ADCL
control.112 {
iface MIXER
name 'Mono ADC L2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'DMIC L1'
item.1 'DMIC L2'
item.2 'Mono DAC MIXL'
control.114 {
iface MIXER
name 'Stereo ADC2 Mux'
value 0
comment {
access 'read write'
type ENUMERATED
count 1
item.0 DMIC1
item.1 DMIC2
item.2 'DIG MIX'
control.115 {
iface MIXER
name 'RECMIXR HPOR Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.116 {
iface MIXER
name 'RECMIXR INR Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.117 {
iface MIXER
name 'RECMIXR BST2 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.118 {
iface MIXER
name 'RECMIXR BST1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.119 {
iface MIXER
name 'RECMIXR OUT MIXR Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.120 {
iface MIXER
name 'RECMIXL HPOL Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.121 {
iface MIXER
name 'RECMIXL INL Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.122 {
iface MIXER
name 'RECMIXL BST2 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.123 {
iface MIXER
name 'RECMIXL BST1 Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.124 {
iface MIXER
name 'RECMIXL OUT MIXL Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
# WARNING
# !!WARN!! BUZZ ANS BREAK EVERYTHING UNTIL REBOOT !!!!!!!
control.113 {
iface MIXER
name 'Stereo ADC1 Mux'
value 1
comment {
access 'read write'
type ENUMERATED
count 1
item.0 'DIG MIX'
item.1 ADC
and you can load it by doing
alsactl -f asound.state restore
To change the values, you have to edit the field "value" of a control and reload the config file with the precedent command. I tried to comment it, but I didn't test any microphone, because I didn't need it currently. We are supposed to have 2 microphones : internal and via the jack. I think it's possible, but I don't have any jack microphone, so if you need it, try to change the different settings and tell me if you find something.
I don't think any GUI, will manage to make the sound control work (even in alsamixer, it's a big mess), because there is no convention followed.
To be continued
Last edited by Ziqumu (2015-05-30 20:06:48)

I had still freeze with uxa. I still don't have any freeze with disabled acceleration. But I also have the flickering tty, but it's not a big problem as this is still usable and I don't often use it.
Maybe when you tried, it was another bug that makes you freeze (with an older version of someting).. I don't know, I will write both solution on the topic.
I've done some search on the touchpad : If you look at the device output (cat /dev/hidraw2 for me), you will see that the device don't send anything when you have two finger that touch the device (so it's not possible to use it as dualtouch). I think it's just a starting data that is send from Asus Smart Gesture under windows that start the Multi touch mode. I've start a vritual machine and I gave it the touchpad usb device (wich is also the keyboard... Usb bus 1 address 3) and I started the driver. Under windows it worked well with multitouch. I killed the virtual machine and I got back my keyboard but not the touchpad. I watch at /dev/hidraw2 and the touchpad now give information with two and more fingers (also it give immediatly data and not after a small lag like normally). After a restart it was gone as expected. I watched the usb driver with usbmon and wireshark and I tried to reproduce UsbHid exchange between computer and device but it didn't work. I still don't know why but I will continue to search.
There is 3 sub device on the usb device mouse/keyboard. 0 is the keyboard, 1 the media key (fn keys except sound) from the keyboard, and 2 the touchpad. So if someone has time to works on media keys, I don't think this is verry difficult. (It's more difficult for the sound, win and sleep button on the screeen, because I didn't find any signals from it.
I will try to work on a aur package that give our kernel with fixes this summer. (And maybe also a pre-builded version).
Last edited by Ziqumu (2015-06-04 23:15:27)

Remote Desktop Access with Mac and Asus Transformer Prime

I have an E2000 router with the most current firmware. I have a Sony VAio laptop with Windows 7 Home Premium 64bit,a Macbook with 10.6.8, and a new Asus Transformer Prime with ICS.My work desktop is a Dell Optiplex 380 with Windows 7 Pro 32bit. I frequently work from home and have no issues remoting into to my work PC from by Sony laptop via VPN and RDP.However I have never been able to connect successfully to my work PC with my Macbook(using Remote Desktop Connection 2.1 for Mac OS) or Asus tablet(using WYSE Pocket Cloud RDP app for Android). I can however connect to the VPN itself on the Macbook and tablet without issue same as my Windows laptop. The other interesting part is I can connect via RDP when I am connected to a Mi-Fi 3g hotspot. So it is definitely something in the my Linksys E2000 blocking the connection for some reason. I have even set Port forwarding of 3389 with the ip's of both the Macbook and Asus tablet.I have also tried connecting via ethernet to the router with the same outcome. I cannot ping my work pc from either device as well.In addition the firewall on my work PC is completely disabled and all services related to Remote desktop access are enabled and running.Does anyone have any ideas?

For my tablet its own ip assigned by the router. Same with the macbook.the Pocketcloud RDP app also uses 3389.I have port 3389 set for both internal and external port and protocol "both" under the Single Port Forwarding tab in the router config.

Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh). So what now?

Changed battery in laptop and now when trying to open dreamweaver cs3, I get "licensing for this product has stopped working"... contact customer support (thats a laugh). So what now?
it says: You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT admin or Adobe customer support for help.
Well it seems I am only able to install this on a maximum of 3 computers so if I uninstall and reinstall I may have used up all three. What caused this in the first place?

And most licenses extend to 2 machines; not 3. Your computer's clock probably reset when you changed batteries. Is your computer's clock set to the correct date and time now?
See Activation & Deactivation Help
Nancy O.

I have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i cannot even restore it. does anyone know what to do?

i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?

I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps.

Cannot connect to the internet with laptop

Background: Started out with iMac connected to Apple Airport Extreme base station via wireless that is connected to broadband/cable linksys modem befcmu10. Then setup Apple Macbook 13" to access internet through Apple Airport Extreme base station via wireless. Worked fine, spectacular. Then setup HP Photosmart C6180 All-in-One printer to be accessed through Apple Airport Extreme base station. Again, worked flawlessly. Then setup and "installed" an offline internet Skype phone [Philips VOIP8411B/37] so I could use it's services and not need a computer to be on. It's connected to the Apple Airport Extreme via Ethernet. To get it up and running, I had to reboot my modem and router. Right after I got it up and running I noticed that the Skype phone was working and the iMac was working but the laptop was now not able to connect to the internet.
Present: Finally able to get back to finding a solution, I was trying to look at settings in the network system preferences and researching things to try. Also going to the Airport Utility program trying different things like having it distribute IP address and having it find DNS servers automatically, etc etc etc. Nothing was working to get the Macbook back online. So I rebooted the modem and router again [because i have been experiencing problems with cable company] just for the heck of it. Wa-la, the iMac and laptop were now both using the internet. But before I realized what was happening, the Skype phone was not able to establish a connection. So before I stopped for the night, I shut everything down and rebooted the cable modem and router.
Next morning I awoke and the Skype was working but the iMac and Macbook weren't able to connect. After trying to fiddle with System Preferences and Airport Utility I resorted to reboot the modem and router. iMac worked, Macbook didn't, Skype worked. After a full day of researching, reading and fiddling with preferences on the macs end, I decided to try the reboot of modem and router. Got iMac online, Macbook online, Skype not.
Discovered problem: Apparently only two of the three devices can connect to the "internet" through the Aiport Extreme base station at a time. So right now, I have to sacrifice one device not to connect to the internet. It's the Macbook for now. From what i can see, the use of the printer is not affected [but it's only setup on the iMac].
I've gone into the network diagnostics on the Macbook and under Network Status on the left, Airport, Airport Settings, Network Settings, and ISP are all green, while Internet and Server are yellow for a second while it searches but turn red and stay red. Contacted cable company and everything is good on their end and they couldn't help further. Something is wrong on my end. Now on to apple care or forum help.
Does anyone have a solution or suggestion of what to do or where to look? Do I have to change something in the Apple Airport Extreme base station? Network setting? Any help would be much appreciated, it's frustrating and time consuming and I'd like to get it all up and running.
Thank you for your time.
BCSlck1

I don't have an answer, but I experienced the same problems trying to set up an airport express to route traffic to my stereo.
Apple Extreme router, iMac and laptop all worked just fine for months, upon installing Airport Express (step by step, according to instructions), all **** broke loose. Airport Utility was unable to see my Airport Extreme router, after hours of rebooting computer, cable modem, router, and finally a hard reset of the Airport Extreme router, it is finally recognized by Airport Utility again.
Recreated network, iMac connects to the internet just fine, laptop (Macbook Air) connects to the network just fine, but will not connect to the internet. Network diagnostics does not help, it gets to the "do you have a router? If so, reboot" stage, and never seems to see the router.
Any suggestions?

Cannot Install windows 8.1 on laptop

Ok so I got robbed but the police were able to get my stuff back which includes my laptop. So now I cannot log on to windows. There is now a password needed when I turn on my computer. I figured out how to get past that and finally logged in. But now the os is corrupt I cannot do anything so I did a factory reset. I also bought a windows 8.1 update disk and tried to update my computer but now the computer does not recognize that there is a disk in the drive. I tried to enter the bios but there is now another password needed to get into the bios? This password I can't figure out all I want to do is install 8.1 can somebody help me?

Hi @danielsan_1969 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7 Notebook and issues with a installing from the CD drive. Here is a link to perform a clean install of Windows 8.1. The section is marked Clean install with a DVD or USB Flash Drive.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Here is a link that Microsoft provided on forgotten passwords. Maybe this will help.
Here is a link to change the boot order, once you get into the BIOS if you need it.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

When attempting to install add-ons, Firefox generates a message saying it is unable to install add-on because Firefox cannot modify the necessary file. To what file is this referring, and how do I fix this problem?

When I download an add-on such as Colorful Tabs and start the installation process, I receive a message that Firefox cannot install the add-on because it cannot modify the necessary file. To what file is this referring?

That is usually caused by Firefox not unpacking the extension.
You can try to set the Boolean pref extensions.alwaysUnpack to true on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Cannot reset/refresh Asus Transformer 2in1 laptop, What now ?

Similar Messages

Maybe you are looking for