Cannot resize object with the bounding box.
I am using Illustrator CS4. When I move my selection tool to the white square on the bounding box for resizing, I am not getting the normal arrows that appear. When I click on the box and move the pointer the entire box and image move. This was working OK until about 5 hours ago.
Thanks for any help. BreBro1
Are u able to see the bounding box ? It might be hidden. Can u please try this
goto View > Show Bounding Box
shortcut Crtl + Shift + B
give it a try if this doesn't work I would suggest u to share a screenshot so I could help you
good luck.
Similar Messages
-
Resizing in Illustrator CC using the Bounding Box is no longer accurate. What happened?
In Illustrator CC, resizing an object using the bounding box is no longer accurate. Snapping to other objects or the grid or anything is completely wrong and, worse, inconsistent. Here is a single box being resized 3 times to the same object. Each time, it becomes a different size.
I used the center-left handle to resize the black box, snapping it to the right edge of the red box. You can see that, each time, it "snaps" to the edge incorrectly. My 80 pt box becomes 78.479 pt, then 79.295 pt, then 79.518 pt.
This is totally unacceptable, obviously. I'm not sure what the point of guides are if they aren't actually guiding. Does anyone have a fix for this?Ethan,
Did you reinstall after updating to Yosemite? I believe the right order/way is to update the OS first, then reinstall the applications, see 6) below.
Or you may have a look at the list since something is obviously wrong.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I have made some objects in 8-bit design style using rectangular grid tool.
I was working on the file, and i saved the file, and then illustrator crashed, and all the data in the 8 bit grid wasn't showing up, only the bounding boxes(rectangular-grid) of those 8-bit designed objects were present with no color/no fill.
I am attaching some screenshots and jpegs to show how it was before and how it is now.
Can somebody help me out in this?Illustrator crashed when saving and most probably took some of your file with it.
Do you have a backup copy? -
I have 4 equal oblong shape created with borders How do I go about knowing what size the selection area is so that I can crop an image to fit. I don't want to use paste in then adjust the bounding box to suit
What do you mean a moderator
-
Why can't I see the bounding box for objects on the pasteboard?
Adobe CC sucks. Why last week was I able to see the bounding box of objects that I had on the pasteboard in InDesign CC, including objects that didn't contain anything yet, and now suddenly this week I can't see them?
It seems as though every week something inexplicably gets changed around. First Save As had no shortcut, then suddenly the shortcut is back, but it doesn't work.
Get it together Adobe. I don't want to be paying a subscription for a product that feels as though it's still in Beta mode.Hi Steve,
Yes thanks, I don't think I was clear in what I wrote. I knew that they could be turned back on, but why did I open InDesign this morning to find my workspace/preferences different than how I left them on Friday?
And I know it isn't a case of my mistakenly turning off the frame edges, because the operator that sits next to me had the exact same thing happen to her copy of InDesign this morning also.
I understand the requirement to update things, but it really does feel as though I'm using software that is still in testing. -
Resizing in photoshop using bounding box
How can I resize shapes or text using the bounding box with out getting pixeled or modifided? thanks!
goldny wrote:
How can I resize shapes or text using the bounding box with out getting pixeled or modifided? thanks!
Shapes and Text Layers should not pixilate when they are resized. However if you have flattened them or rasterzised them or converted them to a smart object layer if you greatly increase their size those types of layer can become pixilated. Vector layer types like Shape layers and text layers are resized using vector graphics where pixel layers are transformed in size using interpolation which results in all new pixels for those layers.
The only time resizing does not change pixels is when you only change the documents DPI resolution without resampling. All that changes then is the print size. The pixel remain the same only their print size is change.
100DPI means pixels are 1/100"x1/100" like on you desktop display. There are 10,000 pixel per square inch.
300DPI means pixels are 1/300"x1/300" the DPI often used for print images there are 90,000 pixels per square inch
You print is 9 time smaller printed then when displayed on your display using actual pixels for your display does not support print DPI it can only display pixels the size its manufactured with, -
Convert jpg to pdf with proper bounding box for LaTeX
Hi,
does anybody know how I can use Acrobat 8 Professional on my Mac to convert a jpg into a pdf that with a proper bounding box for LaTeX?
When I import the jpg and save it as a pdf, then LaTeX cannot determine the correct size, and, therefore, the picture appears way too big in LaTeX's output.
The LaTeX Error message is "Cannot determine size of graphic in myPic.pdf (no BoundingBox)"
On my Mac I don't even know how to check the size of the bounding box.
Thanks for your suggestions!
KurtHi - thanks for all the answers.
I have tried to use Graphics Converter but it has way too many options, and if I just use the default one's, the pdf quality is changed, so black does not appear as black anymore but slightly grey. And since Graphics Converter changed the pdf unexpectedly, I don't want to risk that it changes something else that I might miss now and only realize when the manuscript is in print.
Currently, I cannot check if the correct Bounding Box would be set using Graphics Converter: My LaTeX implementation shows the pdf in the correct size, even without bounding box, but the LaTeX implementation of the journal I am submitting the graphics to does not, and since I already submitted the manuscript, I cannot check anymore. Using GhostView on a PC would help, but on a Mac I don't get GhostScript to do that.
I cannot use jpg's directly, as the journal does not support jpg's.
The figures were prepared using photoshop, so maybe I try exporting them directly from there, but as far as I remember, this did not set the bounding box correctly either. But since I am not sure I need to test it again.
Is there a way to view the bounding box?
I thought that the bounding box just gives the dimensions in pixels, so does the actual size really matter?
Thanks a lot.
Kurt -
RE: multiple named objects with the same name andinterface
David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>David,
First I will start by saying that this can be done by using named anchored
objects and registering them yourself in the name service. There is
documentation on how to do this. And by default you will get most of the
behavior you desire. When you do a lookup in the name service (BindObject
method) it will first look in the local partition and see if there is a
local copy and give you that copy. By anchoring the object and manually
registering it in the name service you are programmatically creating your
own SO without defining it as such in the development environment. BTW in
response to your item number 1. This should be the case there as well. If
your "mobile" object is in the same partition where the service object he is
calling resides, you should get a handle to the local instance of the
service object.
Here is the catch, if you make a bind object call and there is no local copy
you will get a handle to a remote copy but you can not be sure which one!
It end ups as more or less a random selection. Off the top of my head and
without going to the doc, I am pretty sure that when you register an
anchored object you can not limit it's visibility to "User".
Sean
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of David Foote
Sent: Monday, June 22, 1998 4:51 PM
To: [email protected]
Subject: multiple named objects with the same name and interface
All,
More than once, I have wished that Forte allowed you to place named
objects with the same name in more than one partition. There are two
situations in which this seems desirable:
1) Objects that are not distributed, but are mobile (passed by value to
remote objects), cannot safely reference a Service Object unless it has
environment visibility, but this forces the overhead of a remote method
call when it might not otherwise be necessary. If it were possible to
place a copy of the same Service Object (with user visibility) in each
partition, the overhead of a remote method call could be avoided. This
would only be useful for a service object whose state could be safely
replicated.
2) My second scenario also involves mobile objects referencing a Service
Object, but this time I would like the behavior of the called Service
Object to differ with the partition from which it is called.
This could be accomplished by placing Service Objects with the same name
and the same interface in each partition, but varying the implementation
with the partition.
Does anyone have any thoughts about why this would be a good thing or a
bad thing?
David N. Foote
Consultant
Get Your Private, Free Email at <a href=
"http://www.hotmail.com">http://www.hotmail.com</a>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>> -
Can someone help me in building an interactive PDF form with dynamic bounding box?
Hi Guys,
I need to create an interactive PDF form which will contain images, text and fields.
This is how it would be laid out:
Header Image at the top.
Below that a Text Box with a question "Choose the number of licenses" and a drop down option from 1 to 10.
Depending on what they select, I need the following to be displayed.
The following should be encapsuled by a bounding box.
If "1" is selected. "Username: <blank field> Password: <blank field>
Then a button which says "Click Here To Login To Your New Account".
The bounding box should end here.. and I have more text and images below.
This I could achieve! But now if I select "2" I would need the bounding box to automatically become taller to accommodate two rows with "Username <blank> Password <blank>
The bounding box needs to expand or contract based on the number selected in the drop down.
Would love to here your thoughts on this!
Cheers,
RajivIf you were to look at the spec for PDF, you'd see that that is probably not possible with a PDF file.
But, I encourage you to ask this question in the Acrobat PDF Forms forum where the forms experts reside, and perhaps they could suggest an answer. JavaScript can be used, and perhaps that's the answer:
PDF Forms -
Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.
Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
I am using a mac - OSX 10.7.5
I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
The contents I am placing are all Vector - Illustrator files
But, I wonder about some of the vector files I work with. Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight.
Your help is very much appreciated. Thank you! -
Can PB can calcute the bounding box as the needed region in AE?
Hi,
I wrote many small pixel bender that I use mainly in AE. However I need them to be as efficient as possible, so I wonder if Pixel Bender can obtain the bounding box of an image input as the needed region. This way, it will not calculate an entire frame when there is only a few pixels in the frame.
Thanks
Jocelyn TremblayHi,
I did a major breakthrough by rethinking the model. Now I get a real speed improvment, and if the image is fully opaque, there is not too much drawback.
Instead of a simple bounding box, I'm creating a grid in which each cell represent a region of the source and is float4(1). if there is any non-zero transparent pixel. In the last kernel of the graph, i'm processing only when the corresponding value in the grid is float4(1.). I get really efficient results from that. I'm including two graphs. A basic one with a fixed grid of 16px (I didn't do any beanchmark for the grid size) where I output the original image composited over the scaled grid in green. The second one, where the last kernel is a box blur, the grid size equal the blur radius, and there is a convolution kernel between the grid and the box blur that expand the grid to fit the blur.
GridExperience.pbg
<?xml version="1.0" encoding="utf-8"?>
<graph name = "GridExperience" xmlns="http://ns.adobe.com/PixelBenderGraph/1.0">
<metadata name = "namespace" value = "com.jocelyntremblay"/>
<metadata name = "vendor" value = "Jocelyn Tremblay" />
<metadata name = "version" type = "int" value = "1" />
<!-- Image inputs and outputs of the graph -->
<inputImage type = "image4" name = "src" />
<outputImage type = "image4" name = "dst" />
<!-- Graph parameters -->
<parameter type="float2" name="sourceSize" >
<metadata name="minValue" type="float2" value="1"/>
<metadata name="maxValue" type="float2" value="4096" />
<metadata name="defaultValue" type="float2" value="634., 396." />
<metadata name="aeUIControl" value="aePoint" />
<metadata name="aePointRelativeDefaultValue" type="float2" value="1, 1" />
</parameter>
<!-- Graph parameters -->
<parameter type="float" name="gridSize" >
<metadata name="minValue" type="float" value="1"/>
<metadata name="maxValue" type="float" value="64" />
<metadata name="defaultValue" type="float" value="16" />
</parameter>
<!-- Embedded kernel -->
<kernel>
<![CDATA[
<languageVersion : 1.0;>
kernel getProcessingGrid
<
namespace:"com.jocelyntremblay";
vendor:"Jocelyn Tremblay";
version:1;
>{
input image4 src;
output float4 dst;
parameter float2 sourceSize
<
parameterType : "inputSize";
inputSizeName : "src";
>;
parameter float gridSize
<
minValue:float(1.0);
maxValue:float(64.0);
defaultValue:float(5.0);
>;
region changed(region inputRegion, imageRef inputIndex){
return region(float4(0, 0, ceil(sourceSize.x/gridSize), ceil(sourceSize.y/gridSize)));
void evaluatePixel(){
float j;
float4 pix;
dst = float4(0.0);
for (float i = 0.; i < gridSize; i++){
j = 0.;
for (j; j < gridSize; j++){
pix = sampleNearest(src, float2(floor(outCoord().x) * gridSize + i, floor(outCoord().y) * gridSize + j));
if (pix.a > 0.){
dst = float4(1.0);
i = j = gridSize;
]]>
</kernel>
<kernel>
<![CDATA[
<languageVersion : 1.0;>
kernel drawProcessingGrid
<
namespace:"com.jocelyntremblay";
vendor:"Jocelyn Tremblay";
version:1;
>{
input image4 src;
input image4 processingGrid;
output float4 dst;
parameter float gridSize
<
minValue:float(1.0);
maxValue:float(64.0);
defaultValue:float(5.0);
>;
void evaluatePixel(){
float4 gridSegment = sampleNearest(processingGrid, float2(floor(outCoord().x/gridSize), floor(outCoord().y/gridSize)));
if (gridSegment.a > 0.){
//process
dst = float4(0., 1., 0., 1.);
float4 tt = sampleNearest(src, outCoord());
if(tt.a > 0.){
dst.rgb = tt.rgb;
else{
//do not process
dst = float4(0.);
]]>
</kernel>
<!-- Instances of the nodes -->
<node id = "getProcessingGrid" name ="getProcessingGrid" namespace = "com.jocelyntremblay" vendor = "Jocelyn Tremblay" version ="1">
<evaluateParameters>
<![CDATA[void evaluateParameters() {
getProcessingGrid::gridSize = gridSize;
getProcessingGrid::sourceSize = sourceSize;
}]]>
</evaluateParameters>
</node>
<node id = "drawProcessingGrid" name ="drawProcessingGrid" namespace = "com.jocelyntremblay" vendor = "Jocelyn Tremblay" version ="1">
<evaluateParameters>
<![CDATA[void evaluateParameters() {
drawProcessingGrid::gridSize = gridSize;
}]]>
</evaluateParameters>
</node>
<!-- Connect the graph -->
<connect fromImage = "src" toNode = "getProcessingGrid" toInput = "src" />
<connect fromImage = "src" toNode = "drawProcessingGrid" toInput = "src" />
<connect fromNode = "getProcessingGrid" fromOutput = "dst" toNode = "drawProcessingGrid" toInput = "processingGrid" />
<connect fromNode = "drawProcessingGrid" fromOutput = "dst" toImage = "dst" />
</graph>
GridExperienceBoxBlur.pbg
<?xml version="1.0" encoding="utf-8"?>
<graph name = "GridExperienceBoxBlur" xmlns="http://ns.adobe.com/PixelBenderGraph/1.0">
<metadata name = "namespace" value = "com.jocelyntremblay"/>
<metadata name = "vendor" value = "Jocelyn Tremblay" />
<metadata name = "version" type = "int" value = "1" />
<!-- Image inputs and outputs of the graph -->
<inputImage type = "image4" name = "src" />
<outputImage type = "image4" name = "dst" />
<!-- Graph parameters -->
<parameter type="float2" name="sourceSize" >
<metadata name="minValue" type="float2" value="1"/>
<metadata name="maxValue" type="float2" value="4096" />
<metadata name="defaultValue" type="float2" value="1920., 720." />
<metadata name="aeUIControl" value="aePoint" />
<metadata name="aePointRelativeDefaultValue" type="float2" value="1, 1" />
</parameter>
<parameter type="float" name="blurRadius" >
<metadata name="minValue" type="float" value="0"/>
<metadata name="maxValue" type="float" value="25" />
<metadata name="defaultValue" type="float" value="5" />
</parameter>
<!-- Embedded kernel -->
<kernel>
<![CDATA[
<languageVersion : 1.0;>
kernel getProcessingGrid
<
namespace:"com.jocelyntremblay";
vendor:"Jocelyn Tremblay";
version:1;
>{
input image4 src;
output float4 dst;
parameter float2 sourceSize
<
parameterType : "inputSize";
inputSizeName : "src";
>;
parameter float gridSize
<
minValue:float(1.0);
maxValue:float(64.0);
defaultValue:float(16.0);
>;
region changed(region inputRegion, imageRef inputIndex){
return region(float4(0, 0, ceil(sourceSize.x/gridSize), ceil(sourceSize.y/gridSize)));
void evaluatePixel(){
float j;
float4 pix;
dst = float4(0.0);
for (float i = 0.; i < gridSize; i++){
j = 0.;
for (j; j < gridSize; j++){
pix = sampleNearest(src, float2(floor(outCoord().x) * gridSize + i, floor(outCoord().y) * gridSize + j));
if (pix.a > 0.){
dst = float4(1.0);
i = j = gridSize;
]]>
</kernel>
<kernel>
<![CDATA[
<languageVersion : 1.0;>
kernel ConvKernel
<
namespace: "After Effects";
vendor : "Adobe Systems Inc.";
version : 1;
description : "Convolves an image using a smoothing mask";
>
input image4 source;
output pixel4 result;
const float3x3 smooth_mask = float3x3( 1.0, 1.0, 1.0,
1.0, 1.0, 1.0,
1.0, 1.0, 1.0);
const float smooth_divisor = 9.0;
float4 convolve(float3x3 in_kernel, float divisor) {
float4 conv_result = float4(0.0, 0.0, 0.0, 0.0);
float2 out_coord = outCoord();
for(int i = -1; i <= 1; ++i) {
for(int j = -1; j <= 1; ++j) {
conv_result += sampleNearest(source,
out_coord + float2(i, j)) * in_kernel[i + 1][j + 1];
conv_result /= divisor;
return conv_result;
void evaluatePixel() {
float4 conv_result = convolve(smooth_mask, smooth_divisor);
result = conv_result;
region needed( region output_region, imageRef input_index ) {
region result = output_region;
result = outset( result, float2( 1.0, 1.0 ) );
return result;
region changed( region input_region, imageRef input_index ) {
region result = input_region;
result = outset( result, float2( 1.0, 1.0 ) );
return result;
} //kernel ends
]]>
</kernel>
<kernel>
<![CDATA[
<languageVersion : 1.0;>
kernel BasicBoxBlur
< namespace : "AIF";
vendor : "Adobe Systems";
version : 2;
description : "variable Radius Box Blur"; >
input image4 src;
input image4 processingGrid;
output float4 dst;
parameter float blurRadius
<
minValue:float(0.0);
maxValue:float(25.0);
defaultValue:float(5.0);
>;
dependent int radiusAsInt;
void evaluateDependents(){
radiusAsInt = int(ceil(blurRadius));
parameter float gridSize
<
minValue:float(1.0);
maxValue:float(64.0);
defaultValue:float(16.0);
>;
region needed(region outputRegion, imageRef inputRef){
float2 singlePixel = pixelSize(src);
return outset(outputRegion, float2(singlePixel.x * ceil(blurRadius), singlePixel.y * ceil(blurRadius)));
region changed(region inputRegion, imageRef inputRef){
float2 singlePixel = pixelSize(src);
return outset(inputRegion, float2(singlePixel.x * ceil(blurRadius), singlePixel.y * ceil(blurRadius)));
void evaluatePixel(){
float4 gridSegment = sampleNearest(processingGrid, float2(floor(outCoord().x/gridSize), floor(outCoord().y/gridSize)));
if (gridSegment.a > 0.){
float denominator = 0.0;
float4 colorAccumulator = float4(0.0, 0.0, 0.0, 0.0);
float2 singlePixel = pixelSize(src);
for(int i = -radiusAsInt; i <= radiusAsInt; i++)
for(int j = -radiusAsInt; j <= radiusAsInt; j++)
colorAccumulator += sampleNearest(src,
outCoord() + float2(float(i) * singlePixel.x, float(j) * singlePixel.y));
denominator++;
dst = colorAccumulator / denominator;
else{
//do not process
dst = float4(0.);
]]>
</kernel>
<!-- Instances of the nodes -->
<node id = "getProcessingGrid" name ="getProcessingGrid" namespace = "com.jocelyntremblay" vendor = "Jocelyn Tremblay" version ="1">
<evaluateParameters>
<![CDATA[void evaluateParameters() {
getProcessingGrid::sourceSize = sourceSize;
getProcessingGrid::gridSize = max(1., blurRadius);
}]]>
</evaluateParameters>
</node>
<node id = "ConvKernel" name ="ConvKernel" namespace = "After Effects" vendor = "Adobe Systems Inc." version ="1"></node>
<node id = "BasicBoxBlur" name ="BasicBoxBlur" namespace = "AIF" vendor = "Adobe Systems" version ="2">
<evaluateParameters>
<![CDATA[void evaluateParameters() {
BasicBoxBlur::blurRadius = blurRadius;
BasicBoxBlur::gridSize = max(1., blurRadius);
}]]>
</evaluateParameters>
</node>
<!-- Connect the graph -->
<connect fromImage = "src" toNode = "getProcessingGrid" toInput = "src" />
<connect fromImage = "src" toNode = "BasicBoxBlur" toInput = "src" />
<connect fromNode = "getProcessingGrid" fromOutput = "dst" toNode = "ConvKernel" toInput = "source" />
<connect fromNode = "ConvKernel" fromOutput = "result" toNode = "BasicBoxBlur" toInput = "processingGrid" />
<connect fromNode = "BasicBoxBlur" fromOutput = "dst" toImage = "dst" />
</graph> -
Changing the bounding box size
When I go to print an image in Photoshop CC, a dialogue box appears and on the left-hand side is the image to be printed. Bordering the image are small diagonal lines which I'm assuming are the bounding box. The distance between the edge of the page varies from side to side and I want to center the photo. I can't see how to do that.
Thanks.The print dialog preview area show basically three areas. The Paper size the printer is set to and the sizes are displayed with numeric unites. If you see small diagonal lines these are showing the areas the printer can not print on with the current settings. With different printer setting this area may change for example if the printer support borderless the side non printable may go way but there still be some top and bottom non printable area. The Bottom non printable area may go away if you switch from sheet feed to roll paper feed. Inside the diagonal line is the printable area and inside that a bounding box of the image. If You check scale for media the image will be scaled to fit within the print area.
-
Cannot Move Objects with Arrows - Ai CS5
For some reason I cannot move objects with my arrow keys in Illustrator cs5. I can drag them and transform-move them but the arrow keys don't work. very annoying.
Any clues as to what I can do to fix this?
Thanks!Could happen if your keyboard increment value is zero or a very low number.
-
Lost the bounding box (scale handles)
HELP. I have lost the bounding box (scale handles) for only the Rectangle and Rounded Rectangle Tools. I have tried switching the view options on and off with no changes or improvements. How do I reset the presets or preferences. Will this help? Thanks
Robert,
There are a few more options.
As Larry said, the Live Rectangle bug is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
To get round it in each case, it is also possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587 -
Create an object with the name passed in as a string argument to a method
Hi,
I am sorry if it's too trivial for this forum , but I am stuck with the following requirements.
I have a method
void abc(String object_name, String key, String value)
method abc should first check if there exists in memory a hashmap object with the name passed in as argument object_name.
If yes ..just put the key and value there.
if not , then create the hashmap object called <object_name> and insert the key/value there.
Can anybody help me in the first step i.e, how to check if an object exists with the name passed in and if not then create it.
Will getInstance method be of any help?
Thanks in advance for your response.
-Sub-javaDear Cotton.m,
Thanks for your suggesstion. I will remember that.
But somehow I have a strong belief that you still need to consult dictionary for exact meaning of the words like "upset" , "frustration" etc. Not knowing something in a language , that too as a beginner, does not yield frustration, but increases curiosity. And people like petes1234 are there to diminish that appetite.
To clarify above, let me compare jverd's reply to my doubt with petes1234's.
jverd said it cannot be done and suggested a work around (It was perfect and worked for me) While petes1234 , having no work in hand probably, started analysis of newbies mistakes.
jverd solved my problem by saying that it cannot be done. petes1234 acted as a worthless critic in my opinion and now joined cotton.m.
Finally, this is a java forum and I do not want to discuss human characteristics here for sure.
My apologies if I had a wrong concept or if I chose a wrong forum to ask, where people like petes1234 or Cotton.m show their geekdom by pointing out "shortfalls" rather than clearing that by perfect examples and words.
Again take it easy and Cotton.m , please do not use this forum to figure out others' frustration but be a little more focussed on solving others "Java related" problems :)
-Sub-java
Maybe you are looking for
-
How can I update the thumbnails in the slide panel when a slide has been changed?
When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change? We translated slides, but the slides in the slide panel are still in English. Thanks for your help.
-
hi i m installing oracle 9i on windows xp 32 bin bit is giving error that The specifid key was not found while tying to GetValue then two radio button stop installatio of all products stop installation of this component only and then Ok what to do...
-
Can i sync ipod to different accounts
looking to sync a new ipod to my and my girlfriends itunes to get music from both onto ipod. possible?
-
Hi, I want a Java script for Print PDF functionality in WAD. Please help me. Thanks, Ravi.
-
ALE: Function module not allowed: IDOC_INPUT_MATMAS01
Hi, I have extrended IDoc MATMAS05.It is passed on to recepient system. But not posted. I am getting this error. But using WE19 I am able to post. Any solution? Regards, Madhu