Cannot resize tabcontrol in edit mode

First, I thought i had some hidden objects which circumvent to downsize the tabcontrol. But this was not the case.

Check to see if you've locked the control. Select it and then the Reorder button on the toolbar.

Similar Messages

IPhoto 7.1.3: Can view and enlarge photos but cannot see them in edit mode

When selecting and attempting to edit photos, the photo does not appear in the "edit" window below the thumbnails. This "edit" window remains blank. Edit functions appear operable but I cannot see what is happening to the photo until the edit has been made and shows up in the thumbnails. Anyone have a similar issue or suggestion?
Thanks.

The procedure for creating and populating a new library:
To create and populate a new library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
If the problem is persisting into a new library - how big is your HD and how much free space on it?
Regards
TD

Cannot open VI file in edit mode.

I cannot open a VI project that I was working on. Every time I try to open the file it gives me a message that "not enough memory to complete this operation".
This is a large project and I need to be able to access the block diagram.
This happens when I try to open it in edit mode.
Thanks.
Message Edited by Minguccio on 01-06-2006 11:41 AM

Minguccio,
I've done some poking around and may have found some useful information. This error will ocurr if you have too many (and I mean a ton) of controls on the front panel. I haven't heard of this error since LabVIEW 5.1 though and we've upgraded the number of controls you can have on your front panel since then. However, try deleting some controls from your front panel to see if this helps out.
My investigation also lead me to tcp errors. Are you using tcp\ip anywhere in your programming? I found this discussion that may help out if that's the case.
Let us know what you find.
Best Regards,
Chris C
Applications Engineering
National Instruments
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Errors in runtime that I cannot reproduce in edit mode

I just moved an application up to production that doesn't quite work properly but I cannot reproduce the problems in edit mode.
First is I have some filters and a search field on my report page. If I am in Application Builder and I use the reset button all fields clear. But in the runtime version that the end user uses the reset button clears all but the search field.
Second, I have edit buttons on the rows that bring them to the form page and allow them to edit their record. In Application Builder it will populate the values in the form. But in the runtime version that the customer uses it brings the fields up blank.
The application is in Apex 2.2.0.00.32. I have other applications with similar functionality and they all work perfectly. Sure is hard to debug when you can't reproduce it in the builder. :-) Anyone have any ideas?

Yeah, basically there is no issue in the one I moved up. I have this application linked off a web page that allows users to use it. That is the only place that has the issue. When running it while logged into APEX and in the Application Builder it runs fine (hence the debugging issue).
The first page (page 9), brings back a list of all the individuals and information about them. There are two regions, one for filtering and the report region. The filtering region has a reset button. There is a process for clearing out the items when the reset button is hit. However, in the one off the web page the items are not being cleared. We have to go manually reset the values. However, if I run this in Application Builder it works just fine. I do have other applications with similiar functionality linked of the same website and they work as intended as well.
The other problem is similiar in that it works from Application Builder but does not work from the link on the web site (it's an internal site by the way). The primary key of the report list is set to be an link to page 10 for editing that line. So I set the item to be the icon, and to call page 10, which is a form page. I pass the value of the field to the item on the form page.
I have this application in development (and it works correctly there as well) and I do an export/import on it. I also change the application id on it on the import (which I do with most of my apps).
I recently upgraded from 2.0 to 2.2. Other apps (including this one) continued to work with no issues. However, this filtering was added after the upgrade, and is the first app I have exported/imported since that upgrade. I have not deleted it from scratch and reimported it yet cause this is a production application with visibility to end users.
Message was edited by:
user488101

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

Cannot use edit mode with zebra layout in alv

Hi,
I am using 'REUSE_ALV_GRID_DISPLAY' for the ALV genration,
I found that I cannot use
          it_layout-edit_mode = 'X'.
          it_layout-zebra = 'X'.
simultaneously..
Only zebra layout come up and not the edit mode...
Is there a wrk around to solve this
Thank you,
Arjun.G

try removing
it_layout-edit_mode = 'X'.
from ur code..
and add
is_fieldcat-edit = 'X'   " for all columns...

Cannot use "Edit Mode" property to dynamically open a VI in "run mode"

Hello,
I am trying to dynamically open a vi, and would like it to open up in run mode when dynamically called. I am trying to use the "Edit Mode" property to do so by setting it to false before the vi is actually opened by the Open method. However, it always seems to open up in edit mode. Am I doing something obviously wrong here? I am enclosing a screengrab of the vi.
Regards
-Ted
Attachments:
openvi.jpg ‏78 KB

You should use the method Run VI, if you want the VI in the 'Run Mode' without actually running (like ctrl-m), I have no idea how to do that.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Cannot change vi back to edit mode.

Hello,
I saved a vi so that when it was opened it would come up in run mode using "vi properties", "protection", "locked" but when I open the vi it will not let change it back to edit mode (ctrl-m is grayed out). Any assistance would be appreciated. THANKYOU!
Alma

momof4 wrote:
Sorry not sure how to attach the file. Using LabVIEW 2009 and it has several sub vi's.
We don't care about the subVIs. Just attach the one giving you problems. There is a button to attach files below the field where you compose a reply.
LabVIEW Champion . Do more with less code and in less time .

How can I open an email file in edition mode?

Hi!
I use a system here in my company that generates an automatic email and prepare it to be sent.
We were using MS Outlook and we have migrated to thunderbird for lots of reasons.
But since it has migrated, the system cannot generate this email in the composition screen.
It generates in the inbox.
Is there anything I can do to change this?
I have made a few tests and I realize that the same thing happens if I save an email file in my computer and
try to open if with the thunderbird. It's supposed to open in edition mode, so the user can send it out, with just one click.
Thank you!

https://support.mozilla.org/en-US/questions/1004680

Want BW Report within Portal in Editable mode

HI Gurus,
              I hav created Bex Appln iView from Query string obtained from "Query Designer". Now I am able to view Selection screen. When I enter some values and execute Report gets generated. But this report is in Display mode.
              My BW functional consultant want this report in Editable mode to update some fields. They are saying they are able to edit If they go to Bex analyzer (Execel Format).
             Please suggest me probable solution. or what I am missing ?

Values in a BW report cannot be changed.
However a report from integrated planner can be.
I expect your are on BI 7.0 with IP.
You need to create a planning cube and additional Planning Levels.
It is a rather different setup but you can read about it here.
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Best Regards
- Rasmus
Please reward points if helpfull.

Calendar Web Part not showing events except in edit mode

We are unable to view calendar events in the calendar view except in edit mode. When you view the page normally, the calendar shows the current day, but you cannot change the month or add new events.
If you change the view to all items you can see all the events but its not in the calendar view which is preferred.
Any ideas?

Hello,
SharePoint 2010 has some limitations with its group calendar. I recommend checking out this topic to help resolve your issue: Work Around SharePoint
2010 Group Calendar Limitations.
Hope this helps,
- Kemp Brown [MSFT]

Cannot resize partition...

Before mods delete/close/move my post 'cause I'm sure there exist hundred of related problems to this let me explain.
I study Engineering in Computational Systems, for my Digital Design class I need some software that only exist for Windows (I've been searching the web looking for alternatives for Mac without success)... So I decided I'd install BootCamp and Windows 7, but I got the **** "cannot resize partition" error...
So here's the deal... I CAN'T make a backup, my external hard drive is damaged, I've been searching and I found that this problem is 'cause BootCamp can't move big files or stuff like that so to fix the problem I have to defrag the hard disk and here comes another problem, I can't afford iDefrag neither...
Any help for defrag or resize my Mac OS X partition?

Usually when I see "Cannot resize..." it is because the Windows partition was too small, or they need more room for OS X files. Not because they got the error message from Boot Camp Assistant (which tells you to reformat and restore after you have a backup).
Step #1 is (always) backup before making changes.
Real easy... buy an external, you will need backups for Mac OS and probably Windows. you will want to be able to run OS X off external too at some point.
It isn't because there are big files, it is that they can't be moved.
The free space has to be contiguous, not fragmented, also, in order to create a slice for Windows.
I assume it won't work with a VM running under/inside OS X so you need to run Windows natively.
Some people have bought iDefrag ($49?) and results are anywhere from good to mixed to didn't work.
You are right, the question has been asked... about 999 times in the last two years.

Upload functin works in Edit mode but not in View mode

I am using the Oracle AS 10g PDK to integrate struts application into Portal. I found the upload function works fine in portlet edit mode, but it doesn't work in view mode (Go to the "The page cannot be found" and URL is "http://servername/portal/page"). Does anybody know the reason.

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Problem with Opening Outline in edit mode in Essbase

Hi ,
I am trying to open an outline in edit mode in EAS console, but I am getting the followong error
"There is a problem with locking the outline object ,error # 1,051,675"
Kindly help me to fix the issue.
Thanks,
Satheesh

Did you try google?
locking th eoutline error (Again a new feature of OTN)
Can you view the outline, if yes try the steps in Error Opening Database Outline in Edit Mode : "There is a problem with locking the outline object, error # 1,051,675" [ID 1491030.1]
I've seen this error (not sure about the number) where EAS cannot allocate more memory (for loading the outline). I'll try stopping apps and start this one and see if it fixes the issue.
Regards
Celvin
http://www.orahyplabs.com

For Adobe Acrobat X Pro how do you change font size Acrobat in form editing mode?

For Adobe Acrobat X Pro how do you change the font size when Acrobat is in Form Editing Mode? The fonts are different sizes in the highlighted fields. I want the font the same size throughout my document...

Dear Michael:
The documents do not look professional with the 2 different font sizes. And it
is driving me crazy because I cannot figure it out… But I will try the steps you
gave me to change the font size. Attached via e-mail is a screanshot of the
document.
Sincerely, Lisa

Cannot resize tabcontrol in edit mode

Similar Messages

Maybe you are looking for