Cannot restore Environment via UJBR in different system

Hi Experts
I am running BPC 10
BW: 7.3
BPC Patch:
I am hoping someone can point me in the right directly...
We need to replace the entire environment in DEV with what we have in PROD in order to standardise technical names and get DEV up to date.
I first took a backup of the environment in PROD using UJBR. Before this, I checked to ensure I only had 'Information' or 'Warnings' in UJA_DATA_CHECKER. All dimensions were processed and green.
I then deleting the environment in DEV, conscious of the fact that I need to remove all trace to it. I did this via UJS_ACTIVATE_CONTENT. I then checked UJT_CHECK_TABLE_ENTRIES to make sure there were no table entries. There wasn't.... I also checked in RSA1 and there was no sign of the elements relating to the deleted environment
I ran UJBR restore (including Technical Names) and it failed after a few minutes with the message:
Error occured while creating dimension ANALYSIS via Admin API
I then thought I would try restoring the environment to a different name (just to check if there was a problem with what I thought I had deleted). This time, I received:
Restoring environment DEV_WED with original technical name not possible
If I try doing this restore without the technical names, it works fine.
Any suggestions ? I am pulling my hair!
Ian

Hi Ian,
assume you have first deleted your environment as described in my first post and checked the table entries ?
yes we did (report: UJS_ACTIVATE_CONTENT and UJT_CHECK_TABLE_ENTRIES)
After having removed BW ETL flows making use of the C_ACCT and Entity dimensions as data sources in the original productive system,
running a backup on the productive system and restoring this to the development system
it was working flawlessly.
Gertrud

Similar Messages

Usb device not recognized...cannot restore or access drive on two computers

I cannot restore my ipod on two different computers and I am receiving the "cannot recognize" error message on both. Do I have a hardware damage issue? Replacing or updating the usbstor does nothing to alleviate the problem and when I attempt to restore i am told to plug in an ipod to restore...it doesn't recognize..if I plug into the 2nd computer's firewire, there are issues too..the ipod appears as an external and I can copy paste etc. but itunes won't recognize it...

Ah! Thank god, I was 10 minutes away from reformatting my computer because of this stupid problem! But hey, I got a question, this iPod nano is my second because my old one broke, but I had the warranty on my first one so I got a new one for... well, not as much as it would be without it. Is the replacement free? Aside from shipping+handling and if not, do you need the warranty to reduce the price?

Help: Windows cannot restore a system image to a computer with different firmware

I want to recover a complete image of a Windows 7 operating system I have backed up to my other server. But I am getting the error "Windows cannot restore a system image to a computer with different firmware. The System Image was created by a computer using BIOS and this computer is using EFI"
The image was definitely taken from this machine - the firmware has not changed!
What do I need to do to restore the image?
Background Story ..
I bought a new HP 255 laptop per-installed with Windows 7 without Operating Systems instal disks (I will NEVER be stupid enough to do that again!).
I took a complete image of the systems, as suggested so that I was well backed up.
However, my machine corrupted its operating systems with a few weeks. The boot recovery CD did not work (would not boot). So in desperation, and because time was short I went out and bought another, legitimate copy of Windows 7 DVD with a license key (So now I have 2, legitimate copies of the operating system!).
I installed the new copy of Windows 7 - but it was dreadful, because many drivers were missing. Mostly the missing drivers were not available on the HP support site for this machine. ALso, boot up was increadibly slow compared to the original OS installation.
So I created a new boot recovery disk from the new version of Windows, and tried to restore using that. New boot disk loads ok, I can find the old image on my network (after loading a few network drivers). But I won't instal the image - giving the above error message.
I tried deleting the EFI partition from the disk (using GPARTED to reformat that partition). That killed the Windows 7 on the machine - but still gives the same error message when I try to re-image the machine.
I have tried going into the BIOS settings .. HP 255 has a "Legacy Mode" - which I have enabled, but this makes no difference at all!
I think that the kind of solutions I am looking for might be:
1. There is a clever way of disabling EFI on my 255 so that it looks like a legacy BIOS machine, or
2. This EFI this is wired into my new boot recovery disk - and there is a way of creating a boot recovery disk that does not use EFI
This has taken me about 2 weeks so far,please help with any suggestions!

DonOxley wrote:
Erico,
I suspect that "MSDOS" is what the Gparted tool calls "MBR" for a partition table, as explained here:
http://superuser.com/questions/700770/mbr-equals-msdos-for-gparted
I think that you are suggesting I give up on trying to recover the image I have stored on my server and just to instal Windows 7 from my new copy. There are two problems with this.
1. After having systematically downloaded all of the drivers from the HP 255 notebook support page, I am still seeing missing drivers listed. Install the AMD graphics softpaq driver first. It also contains the chipset drivers.
2. The machine is taking a hugely long time to boot up, and seems much slower with this version. Maybe that is a product of using "EFI" rather than "bios" - I don't know.
My assumption is that HP had some special set-up option with their version of Windows which makes the machine more performant. It does not seem to be a coincidence that the image they deliver the machine with is not quite compatible with a 'normal' Windows 7 instal.
So my original question stands: How do I recover the image that I saved away (as per instructed) when I first bough the machine?
You still have not said what you used to create the system image. What is the "image" file's extension?
You are mistaken in your comparison. MSDOS is an operating sytem MBR is a partitioning scheme. that is comparing apples to oranges.
The article is making an oblique reference in that using GPARTED is more or less equated to using the diskpart utility at the command line. Everything done at the comand line is essentially done by use of MSDOS commands. GPARTED does the same thing with LINUX commands via a graphical interface so you don't have to type in the commands in a Linux console.
Do you mean making a backup? a backup is not a clone which can be reproduced on different hardware. The SSD disk replacement does make the hardware differ from the original configuration.
Follow the instaructions on the following tutorial to make your disk a GPT type before installing.
http://www.disk-partition.com/articles/mbr-partition-table-to-gpt.html
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

Partition Restore Cold Backup Different System and Different Version DB

Is it possible, can we restore the cold backup at different database version and different operating system(but same ENDIAN_FORMAT) ????????
My original system HP-UX (64-bit) and database version 10.2.0.3.0 i have cold backup and i want to partion restore on Linux Redhot 5.5 (64-bit), database version 10.1.0.4.0 .
If it is possible. How can i do this.

My original system HP-UX (64-bit) and database version 10.2.0.3.0 i have cold backup and i want to partion restore on Linux Redhot 5.5 (64-bit), database version 10.1.0.4.0 .1. AFAIK you can not do it i mean wiht cold backup move from HP to linux
2. You can try to use exp-imp if you want to change db version.
See below notes:
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Regard
Helios

HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

HT201210 Iphone 3gs needs to restore as cannot turn phone on but cannot restore as unknown error 2001 keeps coming up. I have tried several times on different computers. Any help or ideas?

Iphone 3gs needs to restore as I cannot turn phone on but cannot restore as unknown error 2001 keeps coming up.
I have tried several times on different computers. Any help or ideas? Thanks

Hi there Katherine,
I have an article here that addresses this error code and can give you a few more troubleshooting suggestions for this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

The Program Cannot restore the system partition not enough space

Hi..,
When i try to restore my pc using OKR Button, I am getting This Notice from OKR Application.
"The Program Cannot restore the system partition because there is not enough available space on the hardrive"
Please help Me ...
Thanks in Adavance.

Hi Jaulpellissery,
Welcome to Lenovo Community Forums
I’m sorry to hear that the OKR (One Key Recovery) is not working as expected and displaying error message, this issue will occur if any changes are made in HDD (Hard Disc Drive) partition. Please let me know if you have made any changes in the partition space.
Hope to hear back soon
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

TS3694 My Iphone 4 comes up with "Cannot restore due to Error 21" - have no idea what this is. When I attach a different Iphone to my PC, it updates & does everything properly, no security settings issues either. Can anyone help please?

My Iphone 4 comes up with "Cannot restore due to Error 21". My security settings are all ok as when I connect another Iphone to my PC, it updates & works fine. Does anyone know what Error 21 means please?

When you searched Google for "iPhone Error 21" what did you find?

Disabled iPad, cannot restore via iTunes

Hello there.
My iPad is disabled after too many incorrect passcode attempts. I've tried to restore it via iTunes like as shown on an apple help page but it isn't working. Ipad says connect to iTunes, iTunes says it can't do anything because of the wrong passcode. Have logged into iCloud, gone onto the find my phone thing but device is offline.
Can't seem to work out what to do and feeling frazzled.
Thanks in advance.

Hello ChazzaTron
Have you tried putting your iPad into recovery mode and then restoring in iTunes? Check out the articles below to go through resolving the issue. You should still be able to remove Activation Lock from icloud.com in the Find My iPhone section.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Regards,
-Norm G.

Restoring RMAN backup on a different server

Hi oracle gurus
i have following scenario
i have a compressed backup set of a database
i want to restore that rman backup on to a different server.
both the server have same version of oracle.and both the server are of 32 bit.
please reply if any more info is required.

RESTORE AND RECOVERY PROCEDURE OF PRODUCTION DATABASE BACKUP ON TEST SERVERS
As part of disaster recovery exercise or to test the validity of a RMAN backup, a full restore and recovery of databases can be performed on scratch or test servers utilising the production RMAN backups which have been restored from the tape backups on these test or scratch servers.
This note will illustrate the above procedure by detailing the steps required to restore the backup of a production database (prod1) on a test server linux01 .
The following assumptions are made in this note:
The RMAN backups have been restored from tape backups to the same backup location on the test server as the production server where the backup was originally taken
The identical directory structure as is present on production has been created on the test server. This will apply to not only the location of the database files (data, control files, redo log files), but also to the bdump,cdump, udump and adump locations.
Controlfile autobackup has been enabled. This is important.
Overview
Restore the spfile from the autobackup
Restore the controlfile from the autobackup
Restore the data files
Recover by applying archived redo log files
Open the database with resetlogs
Restore the SPFILE
[oracle@linux01 prod1]$ rman target /
connected to target database (not started)
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> startup force nomount;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/10.2.0/dbs/initprod1.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 2039056 bytes
Variable Size 67109616 bytes
Database Buffers 83886080 bytes
Redo Buffers 6348800 bytes
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore spfile from autobackup;
4> }
RMAN> shutdown immediate;
Restore the Control File
In this case, the instance is now being started with the restored spfile. We can create a pfile as well from this spfile is so required.
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
RMAN> set dbid=4266928631
executing command: SET DBID
RMAN> run
2> {SET CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/u02/backup/prod1/%F';
3> restore controlfile from autobackup;
4> }
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
Restore the database
RMAN> restore database;
Recover the database
The recovery will fail at a point where it cannot restore any more archived redo log files.
In this case the last archived log file which has been backed up is sequence 613.
This information can be obtained by issuing a LIST BACKUP OF ARCHIVELOG ALL command.
So RMAN will fail when it tries to apply sequence 614 ….
RMAN> recover database
[oracle@linux01 PROD1]$ rman target /
connected to target database: PROD1 (DBID=4266928631, not open)
RMAN> sql 'alter database open resetlogs';
RMAN>
reference: http://gavinsoorma.com/recovery-scenarios/

Sublime.so: cannot restore segment prot after reloc: Permission denied

hi
i recently installed WTK2.5.2 in Fedora Core 10 and tried to load demo projects included with it but, got following results in console..
java.lang.UnsatisfiedLinkError: /opt/WTK2.5.2/bin/sublime.so: /opt/WTK2.5.2/bin/sublime.so: cannot restore segment prot after reloc: Permission denied
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1767)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1663)
     at java.lang.Runtime.load0(Runtime.java:787)
     at java.lang.System.load(System.java:1022)
     at com.sun.kvem.Sublime.<init>(Sublime.java:29)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:532)
     at java.lang.Class.newInstance0(Class.java:372)
     at java.lang.Class.newInstance(Class.java:325)
     at com.sun.kvem.Lime.createLime(Lime.java:40)
     at com.sun.kvem.KVMBridge.<init>(KVMBridge.java:46)
     at com.sun.kvem.KVMBridge.getBridge(KVMBridge.java:37)
     at com.sun.kvem.midp.MIDP.run(MIDP.java:699)
     at com.sun.kvem.environment.EmulatorInvoker.runEmulatorImpl(EmulatorInvoker.java:107)
     at com.sun.kvem.environment.EmulatorInvoker.main(EmulatorInvoker.java:135)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:616)
     at com.sun.kvem.environment.JVM.main(JVM.java:103)
please tell me what does it mean and how to correct this problem..

hi
i thought it to be SELINUX problem and google gave me exactly what i wanted .. solution to it..
SELINUX-Targeted Policy disallows restore segment prot after reloc which can be corrected by switching to SELINUX-permissive policy..
this can be achived temporarily by issuing
setenforce permissiveregards
Anshul Bhatnagar

Cannot restore or clone databases in SMSQL

I need to clone a database from several days ago to compare some data. My problem is that none of the databases are available in the restore tree on SnapManager for SQL. All the backups and transaction logs say that they've competed successfully but the restore pane is simply blank. Running the clone or restore wizard fails to list any of the backed up databases. I'm running SMSQL 7.2.0.2184 with snapdrive 7.1 on windows 2012 R2.

I think I've got a bigger problem here. Looking at snap drive, each of the LUNs that I map to, SQL_DB, SQL_Logs, SQL_Sys, and SQL_SnapInfo are mapped three times each. I cannot figure out why this occurred. After hours I stopped SQL services and forced a disconnection of each lun, which one disconnect disconnected all three mappings. I then re-mapped the luns, one-by-one then rebooted the server and SQL came up just fine, but again each LUN was mapped three times. Every attempt at backups now result in the error: "Snapdrive was unable to create a snapshot copy of one or more luns that reside on different system volums. All snapshot copies that were created as part of this lun snapshot copy were deleted. The check the application event log. SnapDrive error code 0xc00402c2. Why are luns mapped three times each? I cannot find anything unusual. Why did my backups break? Getting worried because now I cannot backup or restore production databases. UPDATE: The backups are now working. Basically I had it the limit of snapshots on my volumes. After cleaning up old snapshots, the backups are working again, but still I'm not able to do restores. I have a case open with NetApp on this issue.

I am setting up my Iphone 6 but keep getting an error message "cannot restore backup from Icloud...I backed up my old Iphone 5 just yesterday...Any suggestions?

During setup of Iphone 6 I keep getting error message "cannot restore backup" from Icloud. I backed up my old Iphone 5 yesterday. Is it because of different operating systems? Please help. Thanks!

Does your iPhone 5 IOS is later than iPhone 6 IOS?
If true, you need to update your iPhone 6 before you can restore from your backup.
If not, is iPhone 6 connected to power supply?

Cannot restore Environment via UJBR in different system

Similar Messages

Maybe you are looking for