CANNOT RESTORE I POD TOUCH  2GB ERROR (9)? HELP ME PLEASE

I am unable to restore/update my ipod touch 32GB ipod is gives me an error (9), i have follow all the instructions form the support line and tech person and it still is not working, is their some one out their that had this same problem? also i am out of warrenty since this ipod is 3 years old, any help would be greatfully appreciately.
Thank you

From the article cited at the end of my post:
Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS1275

Similar Messages

  • HT201210 cant restore i pod touch with a 2001 error code

    cant restore i pod touch with a 2001 error code

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
    http://support.apple.com/kb/TS3694#error2009

  • HT201210 I cannot restore my Ipod - An unknown error occured (2001).

    I cannot restore my Ipod touch - An unkown error occored (2001)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • Cannot restore my iPod touch 3g "Software for this iPhone is not currently"

    Hello,
    II have a big problem, I cannot restore my iPod touch.
    I cannot get anything to show on the screen, it seems stuck in DFU mode. When I connect it to my pc, iTunes show this message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes".
    "Check for update" is grayed. Capacity/serial/Software show N/A.
    iTunes detects it as an iPhone but it's an iPod touch.
    I tried 2 different computers.
    I tried to download firmware and shift restore them, tried many, none work, telling it is not compatible.
    When I click restore simply, it show this message "Software for this iPhone is not currently available".
    I tried different ipod cable too, no luck.
    The only way I can see something on the screen is with greenpoison (note that before this, I never tried nor wanted to jailbreak, but I tried a lot of things since 2 days including this, but no luck), so with green poison, I can get the iTunes + cable logo on the screen, but it won't restore either.
    my iPod is just 1 year old, and 32gb, I'm rly frustrated and sad about all this :S, I tried lot of things, searched a lot, nothing work.
    This happened when I came back from the gym, in my car, the iPod would not turn on, I tried again at home, and after some home/power, it turned on, I took a shower and when I came back, it was the same problem but since, it never turned on again.
    Any help would be rly appreciated, thanks.

    If its stuck in DFU mode, just hold the Power/Sleep button and the Home button until the device resets. If your unable to access the springboard, you might need to RECOVER your iPod Touch using the Recovery method, not DFU mode.
    Here are few links you should check out:
    http://support.apple.com/kb/TS1456
    http://support.apple.com/kb/ht180
    iTunes detects it as an iPhone but it's an iPod touch.
    The iPhone and iPod Touch is very similar, except the iPod Touch doesn't have phone capabilities.
    The only way I can see something on the screen is with greenpoison (note that before this, I never tried nor wanted to jailbreak, but I tried a lot of things since 2 days including this, but no luck), so with green poison, I can get the iTunes + cable logo on the screen, but it won't restore either.
    my iPod is just 1 year old
    If you never Jailbroken, then why is greenpois0n installed? Did you buy this from a previous owner?

  • "int cannot be dereferenced" error.. help me please

    I'm working with an array list class called PersonList and it uses attributes from a normal class called Person.
    I would like to make this method PrintPerson inside the PersonList class that should search for a specific Person given the ID as parameter to the method. the method should print all info of the Person if found, otherwise a message saying id is not valid.
    I solved it like this:
    public void PrintPerson(int id)
              System.out.println("Enter ID of the person ");
              id = Stdin.readInteger();
              //search the ID if it is in the List
              int i=0;
              while
              ((i<next)&&(!(list.getID().equals(id))))
              i++;
              //if found
              if (i<next)
                   list[i].OutputWindow();}//display the object ouput of this ID
                   else{
                   System.out.println("The following ID: " id "is not valid!");
              }//end if
         }// end of method
    my problem is with this code:
    ((i<next)&&(!(list.getID().equals(id))))
    I get this error "int cannot be dereferenced"
    what should I do? help me please
    -- Matt

    list.getID() == id                                                                                                                                                                                                                               

  • Since yesterday iam facing problem my iphone 5 doesn't get activated, i tried even with i tunes it give me this message : iTunes cannot restore the iphone because Find My iphone is on. please help me

    since yesterday iam facing problem my iphone 5 doesn't get activated, i tried even with i tunes it give me this message : iTunes cannot restore the iphone because Find My iphone is on. please help me

    If you are a developer, go here:
    solution to Activation Lock with expired iOS 7 beta:
    https://devforums.apple.com/message/880712#880712
    (thanks to suzan135 for the link)
    If you are not a developer, your favorite search engine may provide some direction.

  • I want to download apps for my iphone 4 (4.3.5) but there is Error 1009.help me please.

    i want to download apps for my iphone 4 (4.3.5) but there is Error 1009.help me please.

    Just select no credit card as outlined here:
    http://support.apple.com/kb/ht2534

  • Suddenly my Nikon Coolpix will not upload onto my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please.

    Suddenly my Nikon Coolpix will not upload on to my 09 iphoto it takes for ever then it just shows blank squares no pics and a message that states it cannot read the JPEG files. Can anyone help me, please. I have never had this problem before.

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    You could also try reformat the Card with your camera
    Regards
    TD

  • Back up cannot be used to restore I pod touch

    I tried to download latest software for my I Pod Touch after prompt that new software was available but an error must have occurred during the process as the "connect to I Tunes" screen appeared. I did a restore to factory settings and then tried to use the last back up to restore all my things like notes, calendar, etc but although it started to restore it, it stopped during it and a message came up to say that it cannot be completed as an error occurred - now what can I do? I really want my notes back and don't want to have to download the music again manually - any suggestions?

    I would retry the restore. Also, music (and some other things) are not stored in the backup. Instead they are "added" to the iPod by syncing which occurs after restoring from backup.

  • Bought a used ipod touch 2g its stuck in recovery and I can't get it to restore comes up cannot restore ipod with and unknown error (1)

    I bought a used Ipod touch 2gen its stuck in recovery mode. I tried to restore it but it keeps saying the ipod "ipod" cannnot be restored. Unknown error (1) HELP!!! I have updated Itunes and I have restarted the computer and ipod more than once! Anyone have any suggestions???

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • Restore i-pod touch error code 14

    trying to restore daugters ipod comes up error code 14 plus when plugged in to puter doesn't show any details on ipod in the restore screen in itunes

    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    http://support.apple.com/kb/TS3694#error14

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • Forgot passcode need to restore I pod touch

    I go into to restore my I pod touch, I get the restore screen hit ok and then it takes me to restore and update I click ok it tells me i need to update the Iso so I click next starts do download everything looks good but instead of staying on the summary page where the restore is it takes me to the place where my music is listed and the passcode lock is still on the i pod help me please.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         

  • Restoring I POD touch after forgetting the access code

    I want to restore my I Pod touch  because my son forget the access code but after the loading process on I tunes it says that it took too long and I should check my network settings. I don't know where to look for it? Please help

    Hi, thank you very much for your advice. It worked and my son and I are very happy that he can finally use his I POD again. I should have asked earlier and I would have saved a lot of time. Thanks again.

  • TS1814 i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

Maybe you are looking for

  • Barcode C128 is not getting displayed in Sapscript

    HI, I need to print the barcode in the Sapscript. The barcode is not getting displayed even in the preview also, when I give the Barcode C128. But when I give other Barcodes, it is getting displayed in the preview. Can anyone let me know the solution

  • Print a report on doc format truncate data

    hi I have a report launching with a form in an oracle applications, when I print a report on pdf format looks ok but when I print the same report on doc format truncate data on left and right side. Can you help me thanks

  • How to make a control table with the same number of rows of its itab

    I'm creating a control table, but it always have the maximum number of lines possible. How can I make it so that it has only the same number of rows of it's internal table?

  • Should I load properties and or preferentces into a hashmap??

    Would this make any difference performance wise? I use properties mostly for localized labels so it shouldn't affect much as they're loaded only once. But my code is checking preferences quite often... On the oder hand prefferences are writen to stor

  • Lazy mode setting in Application Module AM for 10g

    Hi, I am using Jdev 10.1.3.x There is very little information given on Lazy mode setting in AM. I tred to enable that and written System.out.println() in getter and setter in Impl class. Even though i enabled Lazy mode application on load of page exe