Cannot restore OD archive.
My server was an OD master. I had archived the directory and authentication data by using server admin tool. Somehow, I set the OD setting into Standalone mode, which destroyed all auth data. Then, I reset the mode again to OD master, and tried to restore the data from the archive that I made before. Restoring process had shown no errors. But, when I checked the directory information trough workgroup manager, it is still empty (except diradmin). So, actually the backup archive is not restored yet.
After searching on the Internet, one said that I have to stop Open Directory service first. But, there is no Start/Stop button for OD service in my server admin. Unloading com.apple.DirectoryService.plist, made me unable to do remote log in into the system, even with root password.
fyi. I had no problem previously with restoring OD archive, including moving in OD archive from other xserve machine. For the moment, I have to restore the OD data into another older machine (successfully), and run that machine as OD master.
I have the exact same issue. 10.5.8 Server. Did you get anywhere with it? I have tried to set the destination to all manner of places but it goes through the motions as you stated but the image is not created. It is rather frustrating as it makes you think there is something major wrong with the OD Master.
If you have any luck please let me know as I to am considering upgrade to 10.6.
Similar Messages
-
Cannot restore some archivelog files?
Dear all,
It is very strange when I restore archivelog, it comes up lots of errors.
I am not sure is it I shutdown database using abort command, so that I cannot restore some of the archive logs during recovery? If Yes, what can I do?
Best Regards,
Amy
RMAN> restore archivelog all;
Starting restore at 25-JUL-08
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 07/25/2008 19:47:58
RMAN-06026: some targets not found - aborting restore
RMAN-06025: no backup of log thread 1 seq 2762 scn 1968789551 found to restore
RMAN-06025: no backup of log thread 1 seq 2761 scn 1968764174 found to restore
RMAN-06025: no backup of log thread 1 seq 2760 scn 1968739033 found to restore
RMAN-06025: no backup of log thread 1 seq 2759 scn 1968713720 found to restore
RMAN-06025: no backup of log thread 1 seq 2758 scn 1968688635 found to restore
RMAN-06025: no backup of log thread 1 seq 2757 scn 1968663371 found to restore
RMAN-06025: no backup of log thread 1 seq 2756 scn 1968638155 found to restore
RMAN-06025: no backup of log thread 1 seq 2755 scn 1968612857 found to restore
RMAN-06025: no backup of log thread 1 seq 2754 scn 1968587680 found to restore
RMAN-06025: no backup of log thread 1 seq 2753 scn 1968562338 found to restore
RMAN-06025: no backup of log thread 1 seq 2752 scn 1968537004 found to restore
RMAN-06025: no backup of log thread 1 seq 2751 scn 1968511599 found to restore
RMAN-06025: no backup of log thread 1 seq 2750 scn 1968486469 found to restore
RMAN-06025: no backup of log thread 1 seq 2749 scn 1968461266 found to restore
RMAN-06025: no backup of log thread 1 seq 2748 scn 1968436092 found to restore
RMAN-06025: no backup of log thread 1 seq 2747 scn 1968411162 found to restore
RMAN-06025: no backup of log thread 1 seq 2746 scn 1968385930 found to restore
RMAN-06025: no backup of log thread 1 seq 2745 scn 1968360528 found to restore
RMAN-06025: no backup of log thread 1 seq 2744 scn 1968335221 found to restore
RMAN-06025: no backup of log thread 1 seq 2743 scn 1968310054 found to restore
RMAN-06025: no backup of log thread 1 seq 2742 scn 1968284858 found to restore
RMAN-06025: no backup of log thread 1 seq 2741 scn 1968259554 found to restore
RMAN-06025: no backup of log thread 1 seq 2740 scn 1968234484 found to restore
RMAN-06025: no backup of log thread 1 seq 2739 scn 1968209320 found to restore
RMAN-06025: no backup of log thread 1 seq 2738 scn 1968184044 found to restore
RMAN-06025: no backup of log thread 1 seq 2737 scn 1968158741 found to restore
RMAN-06025: no backup of log thread 1 seq 2736 scn 1968133666 found to restore
RMAN-06025: no backup of log thread 1 seq 2735 scn 1968108336 found to restore
RMAN-06025: no backup of log thread 1 seq 2734 scn 1968083209 found to restore
RMAN-06025: no backup of log thread 1 seq 2732 scn 1968034276 found to restore
RMAN-06025: no backup of log thread 1 seq 2731 scn 1968009957 found to restore
RMAN-06025: no backup of log thread 1 seq 2730 scn 1967985969 found to restore
RMAN-06025: no backup of log thread 1 seq 2729 scn 1967964167 found to restore
RMAN-06025: no backup of log thread 1 seq 2728 scn 1967939600 found to restore
RMAN-06025: no backup of log thread 1 seq 2727 scn 1967916916 found to restore
RMAN-06025: no backup of log thread 1 seq 2726 scn 1967891727 found to restore
RMAN-06025: no backup of log thread 1 seq 2725 scn 1967866502 found to restore
RMAN-06025: no backup of log thread 1 seq 2724 scn 1967854121 found to restore
RMAN-06025: no backup of log thread 1 seq 2723 scn 1967828623 found to restore
RMAN-06025: no backup of log thread 1 seq 2722 scn 1967803608 found to restore
RMAN-06025: no backup of log thread 1 seq 2721 scn 1967778602 found to restore
RMAN-06025: no backup of log thread 1 seq 2720 scn 1967753508 found to restore
RMAN-06025: no backup of log thread 1 seq 2719 scn 1967728518 found to restore
RMAN-06025: no backup of log thread 1 seq 2718 scn 1967703771 found to restore
RMAN-06025: no backup of log thread 1 seq 2717 scn 1967678560 found to restore
RMAN-06025: no backup of log thread 1 seq 2716 scn 1967653108 found to restore
RMAN-06025: no backup of log thread 1 seq 2715 scn 1967628050 found to restore
RMAN-06025: no backup of log thread 1 seq 2714 scn 1967602962 found to restore
RMAN-06025: no backup of log thread 1 seq 2713 scn 1967578073 found to restore
RMAN-06025: no backup of log thread 1 seq 2712 scn 1967552804 found to restore
RMAN-06025: no backup of log thread 1 seq 2711 scn 1967527631 found to restore
RMAN-06025: no backup of log thread 1 seq 2710 scn 1967502597 found to restore
RMAN-06025: no backup of log thread 1 seq 2709 scn 1967477554 found to restore
RMAN-06025: no backup of log thread 1 seq 2708 scn 1967452498 found to restore
RMAN-06025: no backup of log thread 1 seq 2707 scn 1967427443 found to restore
RMAN-06025: no backup of log thread 1 seq 2706 scn 1967402206 found to restore
RMAN-06025: no backup of log thread 1 seq 2705 scn 1967376951 found to restore
RMAN-06025: no backup of log thread 1 seq 2704 scn 1967351794 found to restore
RMAN-06025: no backup of log thread 1 seq 2703 scn 1967326458 found to restore
MAN-0I am crystal clear from the very begining ,you are misleading this thread to increase yours post and nothing else.
OP is restoring only archive logs and for that it need all archive logs including the archive for the current redo log file. So for that we need "alter system archive log current;".
Yours this illusion is abrupt and without any proof.As you think that before backing up "alter system archivelog current" will be helpful in restoring all the OP's below archived log.Its a fun...
RMAN-06025: no backup of log thread 1 seq 2762 scn 1968789551 found to restore
RMAN-06025: no backup of log thread 1 seq 2761 scn 1968764174 found to restore
RMAN-06025: no backup of log thread 1 seq 2760 scn 1968739033 found to restore
RMAN-06025: no backup of log thread 1 seq 2759 scn 1968713720 found to restore
RMAN-06025: no backup of log thread 1 seq 2758 scn 1968688635 found to restore
RMAN-06025: no backup of log thread 1 seq 2757 scn 1968663371 found to restore
RMAN-06025: no backup of log thread 1 seq 2756 scn 1968638155 found to restore
RMAN-06025: no backup of log thread 1 seq 2755 scn 1968612857 found to restore
RMAN-06025: no backup of log thread 1 seq 2754 scn 1968587680 found to restore
RMAN-06025: no backup of log thread 1 seq 2753 scn 1968562338 found to restore
RMAN-06025: no backup of log thread 1 seq 2752 scn 1968537004 found to restore
RMAN-06025: no backup of log thread 1 seq 2751 scn 1968511599 found to restore
RMAN-06025: no backup of log thread 1 seq 2750 scn 1968486469 found to restore
RMAN-06025: no backup of log thread 1 seq 2749 scn 1968461266 found to restore
RMAN-06025: no backup of log thread 1 seq 2748 scn 1968436092 found to restore
RMAN-06025: no backup of log thread 1 seq 2747 scn 1968411162 found to restore
RMAN-06025: no backup of log thread 1 seq 2746 scn 1968385930 found to restore
RMAN-06025: no backup of log thread 1 seq 2745 scn 1968360528 found to restore
RMAN-06025: no backup of log thread 1 seq 2744 scn 1968335221 found to restore
RMAN-06025: no backup of log thread 1 seq 2743 scn 1968310054 found to restore
RMAN-06025: no backup of log thread 1 seq 2742 scn 1968284858 found to restore
RMAN-06025: no backup of log thread 1 seq 2741 scn 1968259554 found to restore
RMAN-06025: no backup of log thread 1 seq 2740 scn 1968234484 found to restore
RMAN-06025: no backup of log thread 1 seq 2739 scn 1968209320 found to restore
RMAN-06025: no backup of log thread 1 seq 2738 scn 1968184044 found to restore
RMAN-06025: no backup of log thread 1 seq 2737 scn 1968158741 found to restore
RMAN-06025: no backup of log thread 1 seq 2736 scn 1968133666 found to restore
RMAN-06025: no backup of log thread 1 seq 2735 scn 1968108336 found to restore
RMAN-06025: no backup of log thread 1 seq 2734 scn 1968083209 found to restore
RMAN-06025: no backup of log thread 1 seq 2732 scn 1968034276 found to restore
RMAN-06025: no backup of log thread 1 seq 2731 scn 1968009957 found to restore
RMAN-06025: no backup of log thread 1 seq 2730 scn 1967985969 found to restore
RMAN-06025: no backup of log thread 1 seq 2729 scn 1967964167 found to restore
RMAN-06025: no backup of log thread 1 seq 2728 scn 1967939600 found to restore
RMAN-06025: no backup of log thread 1 seq 2727 scn 1967916916 found to restore
RMAN-06025: no backup of log thread 1 seq 2726 scn 1967891727 found to restore
RMAN-06025: no backup of log thread 1 seq 2725 scn 1967866502 found to restore
RMAN-06025: no backup of log thread 1 seq 2724 scn 1967854121 found to restore
RMAN-06025: no backup of log thread 1 seq 2723 scn 1967828623 found to restore
RMAN-06025: no backup of log thread 1 seq 2722 scn 1967803608 found to restore
RMAN-06025: no backup of log thread 1 seq 2721 scn 1967778602 found to restore
RMAN-06025: no backup of log thread 1 seq 2720 scn 1967753508 found to restore
RMAN-06025: no backup of log thread 1 seq 2719 scn 1967728518 found to restore
RMAN-06025: no backup of log thread 1 seq 2718 scn 1967703771 found to restore
RMAN-06025: no backup of log thread 1 seq 2717 scn 1967678560 found to restore
RMAN-06025: no backup of log thread 1 seq 2716 scn 1967653108 found to restore
RMAN-06025: no backup of log thread 1 seq 2715 scn 1967628050 found to restore
RMAN-06025: no backup of log thread 1 seq 2714 scn 1967602962 found to restore
RMAN-06025: no backup of log thread 1 seq 2713 scn 1967578073 found to restore
RMAN-06025: no backup of log thread 1 seq 2712 scn 1967552804 found to restore
RMAN-06025: no backup of log thread 1 seq 2711 scn 1967527631 found to restore
RMAN-06025: no backup of log thread 1 seq 2710 scn 1967502597 found to restore
RMAN-06025: no backup of log thread 1 seq 2709 scn 1967477554 found to restore
RMAN-06025: no backup of log thread 1 seq 2708 scn 1967452498 found to restore
RMAN-06025: no backup of log thread 1 seq 2707 scn 1967427443 found to restore
RMAN-06025: no backup of log thread 1 seq 2706 scn 1967402206 found to restore
RMAN-06025: no backup of log thread 1 seq 2705 scn 1967376951 found to restore
RMAN-06025: no backup of log thread 1 seq 2704 scn 1967351794 found to restore
RMAN-06025: no backup of log thread 1 seq 2703 scn 1967326458 found to restore
MAN-0 Khurram -
Help needed! I cannot restore my iPhone 5, An unknown error occupied (1)
Help needed! I cannot restore my iPhone 5, An unknown error occupied (1)..
That is either going to be a hardware failure or your phone is jailbroken and something has gone awry with the baseband.
-
back up iPhone 3G contact while updating IOS to IOS 6.1.3
then contact lost on iPhone
& cannot restore contact from last backup that appear on iTunes-files!: it is grayed (not pickabble!)
this is scary ! not ipressed by mac for once!
help please!Well Hello,
maybe 3GS as your question indicates that only S update should work, and it works, but now only my name appear in contact! wao! -
IPhone 4s stuck in Recovery Mode. CANNOT Restore. Help!
I need help getting my iPhone out of recovery mode. All that the screen shows is a black background, the white charger, and an arrow pointing at the iTunes icon. When I plugged the charging cable into my computer to recharge my phone's battery -- it had gotten below 10% before the screen changed to this -- iTunes tells me that I need to restore my iPhone.
Here's the problem. Although my back up is pretty much up to date -- I backed up yesterday -- this afternoon, I was at a sports event my company held, with more than 300 participants, all children. I took more than 100 (possibly 200) photos of the children at the request of the company president, to use on the company's web site and social media accounts (I am the company's webmaster). My phone battery died (the Apple logo came up, and then the screen went blank) as the last of the award winners was on the podium (it happened to be my son, so a friend snapped his photo). When I got into the car, I plugged the phone in, and all I got was the low battery icon. When I got home and plugged the phone into the AC base, the charger/iTunes graphics came up. I thought it odd that iTunes was being requested, so I took the phone and the cable and plugged into my laptop... where I was informed of the need to restore the phone.
I CANNOT restore. I CANNOT lose those photos. I already showed them to my boss (my NEW boss... I only got hired last week!) and she was very excited about how great they'll look online. The site is sorely lacking in photos of our children's events. I cannot restore because it will go back to what I had yesterday... and I need these photos!
How can I NOT restore? Please don't suggest my purchasing some software package. The reason I got this job is because I don't have any income and I can't afford $70 software or the time. If the phone must be restored, then I most definitely will need help in attempting to recover the lost data (the photos!). Please, please help... I just spent the last four hours taking these photos and I cannot afford to lose them! Regardless of what it says here under Product, I hae an iPhone 4s and it is running the most up to date iOS, whatever number that is at this point in time. Thank you in advance for your help!It is unfortuante that this happened. However, the iPhone will have to be restored. There is no option other than maybe some third party software, if there was another option, you would know already.
You could restore it and see if you had iCloud photostream on. It stores photos you take for up to thirty days. If it was enabled, restore your device and turn it on in settings -> icloud and those photos will show up no problem.
If you did not, it is a possibility that something like dropbox was performing backups of those photos.
I am really sorry this happened to you with the new job and everything, but a restore is unfortunately required as your iPhone has already lost this data anyway.
http://support.apple.com/kb/HT4486 -
after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you
Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H. -
My boyfriend knew my apple id and my password and when we broke up he changed it and he changed my alternate e-mail address so i cannot restore it. The problem is that my iPhone activation is linked to iCloud. What can i do? I have old password and old alternate e-mail.
Take it and its purchase receipt to a physical Apple Store and/or click here and contact Apple's Account Security team.
(124839) -
Help! My whole family shares one apple ID and one of us deleted a large amount of contacts from our phone, not realizing that they would be deleted from all of our devices. Is it at all possible to restore an archive of our contacts? Is there such a thing?
icloud is designed so that only one user uses it to keep his/her devices in sync. Problems such as yours occur when multiple users use the same account - icloud is not designed for that.
If a user is using your account, they should get their own account and disconnect from your account.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/
Once they have a new account, they should go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
Note that an ID used for iCloud does not have to be the same ID used for iTunes. You can all keep the same iTunes store Apple ID to share purchases, but for iCloud, use different IDs. -
TS3694 I cannot restore my settings on my Ipod touch. Getting error "2003"
I cannot restore my settings on my Ipod Touch (first generation). Getting error message "2003"
I have tried everything for the last three hours!
-
hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.
-
Usb device not recognized...cannot restore or access drive on two computers
I cannot restore my ipod on two different computers and I am receiving the "cannot recognize" error message on both. Do I have a hardware damage issue? Replacing or updating the usbstor does nothing to alleviate the problem and when I attempt to restore i am told to plug in an ipod to restore...it doesn't recognize..if I plug into the 2nd computer's firewire, there are issues too..the ipod appears as an external and I can copy paste etc. but itunes won't recognize it...
Ah! Thank god, I was 10 minutes away from reformatting my computer because of this stupid problem! But hey, I got a question, this iPod nano is my second because my old one broke, but I had the warranty on my first one so I got a new one for... well, not as much as it would be without it. Is the replacement free? Aside from shipping+handling and if not, do you need the warranty to reduce the price?
-
My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?
Time to replace it: $49 2nd Gen shuffle at online Apple Store...
-
Cannot Restore Apps On Older iPhones
I am still a happy user of an iPhone 2G, running iOS 3.1.3 (the latest compatible iOS version).
Some time ago, possibly after a faulty App Store update, my Slovoed application (a German dictionary bought 2-3 years ago for $20) stopped working.
I first tried to reinstall it from the App Store : no luck, the present Slovoed version (3.28) is not compatible with iOS 3 anymore.
I then thought, no problem, since I have a Mac iTunes save of my iPhone 2G, I will restore the proper Slovoed application from iTunes : no luck, apparently iTunes kept only the latest, incompatible version of Slovoed, possibly because I was synchronizing on the same Mac not only this iPhone 2G under iOS 3.1.3 but also an iPad mini under iOS 6.1.
Searching the Internet, I then discovered that when you save/synchronize, iTunes keeps only the latest versions of Apps in the /Users/<user>/Music/iTunes/iTunes Media/Mobile Applications folder, pushing the previously saved versions of the Apps to the trash.
You can recover IN THE TRASH (!!) the .ipa files of the applications... as long as you have NOT emptied the trash since.
No luck again in my case...
I then tried to get the compatible Slovoed 3.01.ipa file directly from Slovoed support : they refused "for security reasons" (?!), suggesting I get a refund from the App Store !.
At that point, I am completely stuck : I paid for an App which I cannot restore at all with the proper original version.
Bottom line : you can buy an Application on the App Store, install it on your iPhone, synchronize regularly your iPhone with a Mac or PC, and still being unable later on to restore the proper compatible version on your iPhone when you direly need it !
This would never have happened on any old Mac/PC for which you had kept the install disks !
One can understand that Apple wants to accelerate its older iPhones obsolescence, but it is completely abnormal you cannot restore from the App Store older applications you fully bought, when the latest versions have become incompatible, and while iTunes does not keep proper Apps backups.
Shame on you Apple, at some point there will be enough people with the same issue to give ground to a nice class action suite...Answering to so many posts in such an authoritative way obviously gave you a false superiority complex...
But may be if you don't want to understand what is plainly written, it is just because you are a troll paid to discourage those too critical about Apple ?
It is Apple who decided to have the App Store maintain a single App version for download, when they could as easily differentiate between versions depending on the iPhone version or iOS version.
It is Apple who built a save/restore mechanism in iTunes which does not allow restoration of Apps properly saved.
Sure, Apps developers could have Apps running on all 6 versions of iOS. But that never happened in the Mac/PC world, that will not happen in the iOS world, and anyway that's not what I am asking for.
I am asking for a save/restore mechanism WHICH WORKS and restores the iPhone in the same state it was when saved, APPS INCLUDED !!! -
Help: Windows cannot restore a system image to a computer with different firmware
I want to recover a complete image of a Windows 7 operating system I have backed up to my other server. But I am getting the error "Windows cannot restore a system image to a computer with different firmware. The System Image was created by a computer using BIOS and this computer is using EFI"
The image was definitely taken from this machine - the firmware has not changed!
What do I need to do to restore the image?
Background Story ..
I bought a new HP 255 laptop per-installed with Windows 7 without Operating Systems instal disks (I will NEVER be stupid enough to do that again!).
I took a complete image of the systems, as suggested so that I was well backed up.
However, my machine corrupted its operating systems with a few weeks. The boot recovery CD did not work (would not boot). So in desperation, and because time was short I went out and bought another, legitimate copy of Windows 7 DVD with a license key (So now I have 2, legitimate copies of the operating system!).
I installed the new copy of Windows 7 - but it was dreadful, because many drivers were missing. Mostly the missing drivers were not available on the HP support site for this machine. ALso, boot up was increadibly slow compared to the original OS installation.
So I created a new boot recovery disk from the new version of Windows, and tried to restore using that. New boot disk loads ok, I can find the old image on my network (after loading a few network drivers). But I won't instal the image - giving the above error message.
I tried deleting the EFI partition from the disk (using GPARTED to reformat that partition). That killed the Windows 7 on the machine - but still gives the same error message when I try to re-image the machine.
I have tried going into the BIOS settings .. HP 255 has a "Legacy Mode" - which I have enabled, but this makes no difference at all!
I think that the kind of solutions I am looking for might be:
1. There is a clever way of disabling EFI on my 255 so that it looks like a legacy BIOS machine, or
2. This EFI this is wired into my new boot recovery disk - and there is a way of creating a boot recovery disk that does not use EFI
This has taken me about 2 weeks so far,please help with any suggestions!DonOxley wrote:
Erico,
I suspect that "MSDOS" is what the Gparted tool calls "MBR" for a partition table, as explained here:
http://superuser.com/questions/700770/mbr-equals-msdos-for-gparted
I think that you are suggesting I give up on trying to recover the image I have stored on my server and just to instal Windows 7 from my new copy. There are two problems with this.
1. After having systematically downloaded all of the drivers from the HP 255 notebook support page, I am still seeing missing drivers listed. Install the AMD graphics softpaq driver first. It also contains the chipset drivers.
2. The machine is taking a hugely long time to boot up, and seems much slower with this version. Maybe that is a product of using "EFI" rather than "bios" - I don't know.
My assumption is that HP had some special set-up option with their version of Windows which makes the machine more performant. It does not seem to be a coincidence that the image they deliver the machine with is not quite compatible with a 'normal' Windows 7 instal.
So my original question stands: How do I recover the image that I saved away (as per instructed) when I first bough the machine?
You still have not said what you used to create the system image. What is the "image" file's extension?
You are mistaken in your comparison. MSDOS is an operating sytem MBR is a partitioning scheme. that is comparing apples to oranges.
The article is making an oblique reference in that using GPARTED is more or less equated to using the diskpart utility at the command line. Everything done at the comand line is essentially done by use of MSDOS commands. GPARTED does the same thing with LINUX commands via a graphical interface so you don't have to type in the commands in a Linux console.
Do you mean making a backup? a backup is not a clone which can be reproduced on different hardware. The SSD disk replacement does make the hardware differ from the original configuration.
Follow the instaructions on the following tutorial to make your disk a GPT type before installing.
http://www.disk-partition.com/articles/mbr-partition-table-to-gpt.html
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Cannot restore my iPod touch 3g "Software for this iPhone is not currently"
Hello,
II have a big problem, I cannot restore my iPod touch.
I cannot get anything to show on the screen, it seems stuck in DFU mode. When I connect it to my pc, iTunes show this message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes".
"Check for update" is grayed. Capacity/serial/Software show N/A.
iTunes detects it as an iPhone but it's an iPod touch.
I tried 2 different computers.
I tried to download firmware and shift restore them, tried many, none work, telling it is not compatible.
When I click restore simply, it show this message "Software for this iPhone is not currently available".
I tried different ipod cable too, no luck.
The only way I can see something on the screen is with greenpoison (note that before this, I never tried nor wanted to jailbreak, but I tried a lot of things since 2 days including this, but no luck), so with green poison, I can get the iTunes + cable logo on the screen, but it won't restore either.
my iPod is just 1 year old, and 32gb, I'm rly frustrated and sad about all this :S, I tried lot of things, searched a lot, nothing work.
This happened when I came back from the gym, in my car, the iPod would not turn on, I tried again at home, and after some home/power, it turned on, I took a shower and when I came back, it was the same problem but since, it never turned on again.
Any help would be rly appreciated, thanks.If its stuck in DFU mode, just hold the Power/Sleep button and the Home button until the device resets. If your unable to access the springboard, you might need to RECOVER your iPod Touch using the Recovery method, not DFU mode.
Here are few links you should check out:
http://support.apple.com/kb/TS1456
http://support.apple.com/kb/ht180
iTunes detects it as an iPhone but it's an iPod touch.
The iPhone and iPod Touch is very similar, except the iPod Touch doesn't have phone capabilities.
The only way I can see something on the screen is with greenpoison (note that before this, I never tried nor wanted to jailbreak, but I tried a lot of things since 2 days including this, but no luck), so with green poison, I can get the iTunes + cable logo on the screen, but it won't restore either.
my iPod is just 1 year old
If you never Jailbroken, then why is greenpois0n installed? Did you buy this from a previous owner?
Maybe you are looking for
-
Issue in sending the email with XL attachment in ECC version
Hi, I have an issue with sending the email with XL attachment. My program is sending a mail to the receiver with XLS as attachment. Recently we have migrated from 4.6B to ECC version. Same code was worked in 4.6B.But it is not working in ECC version.
-
How do i get films onto my ipod touch?
how do i get films onto my ipod touch
-
Problems with getting default Texts (HRRCF00_GET_DEFAULT_TEXTS)
Hi experts, we are using EHP4 and I have implemented and activated BADI HRRCF00_GET_DEFAULT_TEXTS for getting default Text during the posting procedure within SAP E-Recruiting based on WebDynpro. The BADI is called from WD Controller ERC_C_REQ_MGMT_U
-
Windows 2008 R2 Sp1 backup failing with Event Id 517 and Error Code: 2147942487
We have a windows share that we dump multiple windows backup images from our servers. We have 1 server consistently failing when performing a manual "Backup Once...." operation. The error message in the Windows Backup gui is: "Failed The paramete
-
Error during compiling cobol code after upgrading tuxedo 6.5 with 11
cc: 1501-238 configuration file /etc/vac.cfg does not exist cob64: error(s) in C compilation: BS-c5050.c CMDTUX_CAT:1832: ERROR: can't execute cobcc -I$TUXDIR/include -DTMMAINEXIT -o BS-c5050.c -L${TUXDIR}/lib -brtl -qstaticinline -lcobatmis -ltux -l