Cannot restore the phone after Tango(refresh with ...

Hello!
I cannot restore my phone after the Tango update. The Zune software says that there is a problem. I get the error code 801812E0. It is very frustrating! Has anybody the same issue?

Hi,
Thanks for the feedback. You can not use the restore function in Zune to get information back to your phone. The restore function will completely rewrite the restored content including the OS and firmware.
You can sync music and other media files back using Zune. All contacts will be synced back as soon as you setup their accounts again in Settings>email+accounts and you can re-download apps using the app Reinstaller. For paid apps you can just select BUY again and you will be notified you have paid for the app and you can install it again after that.
Hope this helps, let us know if you have any further questions.
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Similar Messages

Everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? With the options cancel, continue restore and delete back-up??

I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?

I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup

TS1702 cannot restore the phone on the screen just show itunes logo and USB cable

cannot restore the phone while trying to download the ios 6
the screen shows only itunes logo and USB cable

plug your ipod into itunes...it may not do anything plugging it into your own itunes so you may want to try plugging it into someone elses to save the trouble. I had this same problem last week plugged it into my dads ipod and it worked (:

HT201269 I appear to have a software problem and I cant turn off "find my iPhone" in the settings. I therefore cannot restore the phone from the backup on my computer. Any ideas or will have to send the phone back to Apple??

My iPhone 5s has stopped accessing wifi. I would like to restore the phone but it will not allow me to turn off "find my iPhone" in the settings tab since I cannot get to the net. Is there any other way to turn off "find my iPhone"

There is! Click here: http://support.apple.com/kb/ph2702

HT4623 cannot activate the phone after updating

cannot activate phone after updating

it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.

Uploaded softwear on phone last night, now my computer cannot restore the phone and update. about 5min into it, i get the message that iphone has not been restored even though that is the button i clicked on.

I upgraded my iphone last night on the phone, today I cannot get the computer and the phone to work together. When I click restore iPhone, and my only choice is to restore and upgrade, when it starts the upgrade, it says the phone has not been restored. I did just upgrade the itunes on the computer also.

This may not solve your problem but may clear up a couple of things.
1: Re the connected to wi-fi, plugged in and locked thing is for automatic backups. It doesn't need to be plugged in or locked for it to work when you go to Settings > iCloud > Backup and tap Back Up Now. Mine completes the backup quickly without being plugged in or locking (but I don't have a lot to backup).
2: Locked just means the lock screen is on (press the sleep/wake button on top) -- it will work without a passcode (& again, the lock screen on is only required for the automatic backup).
3: You can see what is using your storage and maybe reduce some of it so that you don't have to pay for storage. Instructions in Manage your iCloud storage - Apple Support

Windows Media Player cannot play the file after ame encode with out audio?

strange behavior using media encoder today
ive selected no audio when encoding an h264 for the android...every time (5x) I tried to encode I got "Windows Media Player cannot play the file" when I selected audio the error went away..
the other issue I had was the work area only , my encodes were including the whole sequence an not the "work area only" when selected?
buggy day ..love to edit ..
mike d Oakland ca.
cs6 premiere

The export without audio is an .m4v file, which many plays have trouble with. For now, use the audio, which creates a playable .mp4 file.

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

I have a problem with my iPhone 4s. An Apple rep looked at the phone today and determined the phone will have to be replaced. I am trying to back up my data on the phone to iTunes but I cannot get the phone to power up.

I have a problem with my iPhone 4s. An Apple rep looked at the phone tonight and determined I will need a new phone. I am now trying to back up my data to iTunes but I cannot get the phone to turn on. I have it plugged into my computer monitor but it just slowly flashes the Apple symbol. Any ideas on how I can get it to power up for the backup?

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

I downloaded pictures to iTunes, the phone would not delete the pictures and then hung up after trying to download the updates and now its telling me I have to restore the phone.

My iPhone 5 had too many pictures stored on it. So I downloaded them to iPhoto after they were imported I click for it to delete the pictures from the phone. The pictures were never deleted and then the phone try to update to the new the new IOS even though I did not click for the phone to do this. I got an error saying the phone could not update and that I would have to restore the phone to factory settings. The phone is frozen and just talks to me when I try to do a function on the phone. And it hasn't restored or updated anything.

Hey klegg,
Thanks for the question. It sounds like you are experiencing issues with your iPhone. To troubleshoot these issues, let’s go ahead and restart/reset your device if it is unresponsive:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If your issue persists after restarting/resetting, go ahead and perform and backup and restore:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Thanks,
Matt M.

I've lost my Contacts, Messages, Photos etc after having IOS 4.3.2 installed at the Apple Store. I cannot locate previous back-up history, only the back-up after I synced the phone after it had been updated. How do I recover my previous info please?

I've lost my Contacts, Messages, Photos etc after having iOS 4.3.2 installed at the Apple Store. I cannot locate previous back-up history, only the back-up after I synced the phone after the update had been installed. How do I recover my previous information please?

You should have restored the backup that was on your computer before syncing. Now it is too late. However, if you followed the instructions in the manual and set up an app on your computer to sync contacts and calendar to they will still reside in those apps. Photos in the camera roll are lost, however, if you had followed the instructions in the manual to copy photos from the camera roll to your computer regularly you can restore them to the photo app from the copy on your computer. Text messages are gone for good. Music and Apps should be in the music library on your computer.

HT1414 hi yesturday i tried to put photos of my phone,and its frozed on me,on the screen its got itune logo,with a cable on the screen,ive tried to switch it of but it goes on again,i cannot use the phone,please help lol

Hi yesturday,i was tranfering my photos of my phone to my computor,and the phone has froze on me,i cannot switch the phone on or of,what i can see on the screen,is the itunes logo with a cable on the screen,its looks the one you put the cable into one of the ports,there is no way possible to switch of or on please help,im stressed out lol,thankyou francis01224

Aug 15, 2012 8:28 AM (in response to EricaP1234)
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

HT201210 i have a ipone4s and am trying to update to the latest version. There has been a error and now all i can get is a iTunes logo with a connection arrrow pointing up. i cannot get the phone to do any thing.

I am trying to updated my Iphone 4s and there is a erroe while updating. My phone has now got a iTunes icon with a arrow below it and a picture of a connectione cable below that. I cannot get the phone to respond to any thing.

Here's a few things to check
1. Make sure you are using the original usb cable provided by apple
2. Try re-installing iTunes preferrably uninstall then install a new version
3. Try different usb ports
4. If all goes wrong, install itunes on a different computer and update it on the other computer, then you can always plug it up again on yours and restore your information

I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore.

I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore. PLEASE HELP

I did restore my phone last week, it went well. Today, i turned my phone off and turn it back on, now it is stuck in itunes logo and i was thinking that it needs a restore again. Once i tried restoring it, it finishes the "Extracting iPhone Software" part, but after that the error appears. PLEASE HELP ME

"Cannot Authenticate the Phone" with IBM T60 and N...

Hello!
I've been reading through the various posts on the "cannot authenticate the phone" -issue, yet after uninstalling & installing BT stack & PC Suite various times my problem still persists. I've also followed every single piece of instruction I've found on uninstalling Microsoft BT stack, yet PC Suite still reports that it is available.
I can connect from my laptop to the dial-up networking service on the phone, and I am able to connect from the phone to the headset service on my laptop, so BT stack & pairing works ok; I am also able to synchronise the phone via IR => problem must be somewhere in the PC Suite's bluetooth sections.
Is there any flags to enable debugging level logs in PC Suite? I would SOOO MUCH like to see what the hell goes wrong in there.
Or is there *any* way of getting this to work??
Getting pretty tired with this..
Rgrds,
sakuvee.
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United States)
Input language: Finnish
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 11.0
Build 8010
Bluetooth stacks:
Microsoft Bluetooth stack
Version 5.1.2600.2180
WIDCOMM Bluetooth stack
Version 5.0.1
Build 3200
BT device: Thinkpad Bluetooth with Enhanced Data Rate
BT firmware: Broadcom 2.1.92.108, HCI 2.0 206C, LMP 2.0 415C
BT driver: Broadcom, 1.8.2006, 5.0.1.3200
Phone: V 3.0617.0.6, 03-05-2006, RM-92, Nokia N80 (03)
---Message Edited by sakuvee on 19-Oct-2006
02:46 PM

OK - here's what I did to FINALLY get it working:
1) Uninstall PC Suite (from Add Remove Programs)
2) Uninstall Nokia Connectivity Solution
3) Remove C:\Documents and Settings\[uid]\Application Data\Nokia, ...\\Application Data\[uid]\PC Suite, ...\All Users\Application Data\PC Suite, C:\Program Files\Common Files\Nokia, C:\Program Files\Nokia. Basically all Nokia directories left behind by Nokia uninstallers.
4) Restart machine
5) Run PC Suite Cleaner (all options one at a time, except the diagnostics, don't restart although it recommends to do so)
6) Restart machine
7) Manually clean all typelibs, activex-objects, device-ids and other registry entries linking to or containing Nokia related stuff from registry using regedit.exe
8) Restart machine
9) Install PC Suite
10) Unpair phone (from laptop and from phone)
11) Run Get Connected Wizard

Cannot restore the phone after Tango(refresh with ...

Similar Messages

Maybe you are looking for