Cannot Restore the The database backup in 2012

Restore of database 'LIBRARY' failed . (miscrosoft.sqlserver.management.relationalenginetasks)
additional information :-
the database was backedup on a server running version 8.00.0194. that version is incompatible with this server , which is running version 11.00.2100 ..
Please crack me out ..

Hello,
You're attempting to restore a database that was backed up on SQL Server 2000, directly to a SQL Server 2012 instance. This is not supported.
You'll first need to restore the database backup to a 2005/2008/2008R2 instance, take a new backup, and restore that new backup to 2012. SQL Server 2000 is too old to do a direct migration to 2012.
-Sean
The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

Similar Messages

Restoring the database backup daily after performing some changes on d'base

Hi all,
Im a JUNIOR DBA... please help me..
I have an Oracle 10g database and i have taken a cold backup for the same.(Say i have 10 users)
MONDAY - Now, suppose out of the existing 10 users, i updated 6 tables in each user, so the total updated tables are 60 tables, these tables are only for TESTING purpose.
TUESDAY - Now, suppose out of the existing 10 users, i updated 4 tables in each user, so the total updated tables are 40 tables, these tables are only for TESTING purpose.
Now the question is -
Daily i need to restore the original database backup atleast once, where in i dont want the updated tables of say MONDAY..
Please, let me know how to proceed
Regards,
- Sri

Start with the backup and recovery guide. It will tell you how to work this scenario. Basically, you will restore Sunday backup and apply archived redo logs until you reach the point in time immediately before the changes you do not want.

Restore the database or tablespace from a old backup piece

Hi All,
We have the senerio like this.
Day 1 : Took the complete database backup in RMAN
Few changes done in database
Day 2 : Took the complete database backup in RMAN
Few changes done in database
At day 3 if we wanto restore the database to Day 2 backup we can simply use restore database and recover database.
Supose if we wan to restore the day 1 backup, please let me know if this will work.
run
set until time "to_date('10-06-2009 08:00:00','DD-MM-YYYY HH24:MI:SS')";
restore database;
recover database;
Or is there any other way to do that.
Please advice,
Thanks & Regards,
Rakesh

It will work if you are running in archive mode and you have day 1 backup files available for RMAN.
I recommend saving the current control file and restoring the original day 1 control file before you issue the resote / recover command.
Oded
[www.dbsnaps.com]
[www.orbiumsoftware.com]

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

After replacing a failed hard drive with new one I inadvertently created a different account name(home/user) than the one in the Time Machine backup. Now I cannot restore the photos in iPhoto. What are my options?

The best thing to do would be to start over. Use Setup Assistant this time.
Boot into Recovery, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

That error often indicates a hardware failure.Try restoring a few more times. If it consistently gives you that error, make an appointment at the genius bar to have it looked at.

Cannot open the database, stuck in mount mode

Someone please shed some lights on this problem.
I ran into some media failure, and ended up restoring the database from the offline whole backup.
The database is in the nonarchivelog mode (I know, it is not good), so there is no archive log files and
restore database is the only solution.
. startup mount
. restore database <== ran ok
. ALTER DATABASE CLEAR LOGFILE GROUP 1 <== ran ok
. ALTER DATABASE CLEAR LOGFILE GROUP 2 <== alter failed
ORA-01624: log 2 needed for crash recovery of instance orcl (thread 1)
Alter failed with group 2 and 3 because one was CURRENT,
and one was ACTIVE.
SQL> select group#, sequence#, members, status from v$log;
GROUP# SEQUENCE# MEMBERS STATUS
1 0 2 UNUSED
3 189 2 CURRENT
2 188 2 ACTIVE
I also tried 'alter database open resetlogs', and got:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
I don't think I can recover the datafile since there is no archive log file here.
Besides, if the restore database ran fine, why did I get SYSTEM01.DBF datafile needs media recovery message?
Right now, the database is in mount mode, and I cannot open it. How do I solve the problem with
ALTER DATABASE CLEAR LOGFILE GROUP for group 2 and 3?
Any suggestion? Thank you for the input.
The database is 11G running on Window.

I would think the cold backup ran successfully. Here is the backup record:
RMAN> run {
2> shutdown immediate;
3> startup mount;
4> allocate channel c1 type disk;
5> backup as backupset database;
6> alter database open;
7> }
8>
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 535662592 bytes
Fixed Size 1348508 bytes
Variable Size 331353188 bytes
Database Buffers 197132288 bytes
Redo Buffers 5828608 bytes
allocated channel: c1
channel c1: SID=156 device type=DISK
Starting backup at 29-NOV-09
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
input datafile file number=00002 name=C:\APP\DAVECW\ORADATA\ORCL\SYSAUX01.DBF
input datafile file number=00001 name=C:\APP\DAVECW\ORADATA\ORCL\SYSTEM01.DBF
input datafile file number=00003 name=C:\APP\DAVECW\ORADATA\ORCL\UNDOTBS01.DBF
input datafile file number=00005 name=C:\APP\DAVECW\ORADATA\ORCL\EXAMPLE01.DBF
input datafile file number=00006 name=C:\APP\DAVECW\ORADATA\ORCL\INVENTORY01.DBF
input datafile file number=00004 name=C:\APP\DAVECW\ORADATA\ORCL\USERS01.DBF
channel c1: starting piece 1 at 29-NOV-09
channel c1: finished piece 1 at 29-NOV-09
piece handle=C:\APP\DAVECW\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_11_29\O1_MF_NNNDF_TAG20091129T230
632_5K6VQY0W_.BKP tag=TAG20091129T230632 comment=NONE
channel c1: backup set complete, elapsed time: 00:01:55
channel c1: starting full datafile backup set
channel c1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel c1: starting piece 1 at 29-NOV-09
channel c1: finished piece 1 at 29-NOV-09
piece handle=C:\APP\DAVECW\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_11_29\O1_MF_NCSNF_TAG20091129T230
632_5K6VVNJR_.BKP tag=TAG20091129T230632 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:03
Finished backup at 29-NOV-09
database opened
released channel: c1
Recovery Manager complete.

When iam restoring the database getting error

hi ,
when iam restoring the database getting following error :
SELECT schemaname FROM syscat.schemata WHERE schemaname='SAPTOOLS'
SQL1328N An implicit connection attempt failed. The database alias name or database name "TPD" was not found in the local database directory.
SQLSTATE=42705

Hi,
What is your ABAP connect user. its should be same as source.
and
SQL1024N
A database connection does not exist.
Explanation
There is no connection to a database. Other SQL statements cannot be processed unless an SQL CONNECT was previously executed.
The command cannot be processed.
User response
If the error occurred when disconnecting from the database, continue processing. If the error occurred on another SQL statement, issue an SQL CONNECT statement and resubmit the command or statement.
IN addition
db2 connect to SID
It will show you the default database schema connection
After that,execute db2 ger db cfg for SID
It will show you the DB2 parameter values for your schema
There`s a concept of DBM or database manager, the configuration of which you can check with:
db2 get dbm cfg
DBM is the super-set and DB Schema is the subset
Thanks
Sadiq
Edited by: sadiq iqbal on Jan 12, 2012 5:57 PM

How to restore the Password backup in sql server 2005

How to restore the Password backup in sql server 2005

Hello,
THANKS............ BUT
I executed this query
RESTORE DATABASE new_data1
FROM DISK = 'd:\UK_DETAILS.bak'
with password ='selfinity123'
WITH MOVE 'UK_DETAILS.bak' TO 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\new_data1.mdf',
MOVE 'UK_DETAILS.bak' TO 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\new_data1.ldf'
I got the error
Msg 319, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon.

RESTORING THE DATABASE AFTER BEING EDITED OR DELETED

How to restore the database after being edited? I m using sql server 2008 R2, I've done backup with some foolish knowledge and many tables have disappeared from the database. I want to get them back. Please help me.

Do you have backup which includes data which has been edited/removed by you .If so below query might help.
use master
go
alter database db_name set single_user with rollback immediate
go
restore database db_name from disk='locaion of backup'
with replace,recovery
If you have transaction lgo backups as well please dont use above method.In such case you will need to first restore full backup with no recovery like below and then apply all transaction logs with no recovery
but the last transaction log with recovery( last trn log just before you edited)
use master
go
alter database db_name set single_user with rollback immediate
go
restore database db_name from disk='locaion of backup'
with replace,norecovery
Hope this helps
More details in below link
http://www.karaszi.com/SQLServer/info_minimizing_data_loss.asp
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

I recently purchased a new Iphone 5C and want to give my Iphone4S to my husband to use. An old email id that no longer exists keeps popping up and I cannot restore the 4S to factory settings so he can use it as his own. Any suggestions?

I recently purchased a new Iphone 5c and gave my 4s to my husband to use. However an old email address of mine keeps popping up that no longer exists and I don't know what the password was
and I cannot restore the 4s to factory settings. Is there any resolution for this?

Find My iPhone Activation Lock
Find My iPhone Activation Lock- Removing a device from a previous owner’s account
The problem is covered in the above links. Unless you know the Apple ID and password used to set up the Find My Phone lock originally, then the phone is useless. If you have proof of ownership and that you are the original purchaser, then you can ask Apple to release it from the activation lock.

I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one made AFTER the lost data. How can I access an older backup from the cloud?

I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one it made AFTER the lost data. How can I access an older backup from the cloud?

Why don't you talk to apple and find out if backup exists? That conversation with apple will stop your guessing.

Problem in Restoring the database

Hi,
I want to restore the database
RMAN> startup force mount;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 07/20/2009 17:06:56
RMAN-04014: startup failed: ORA-12514: TNS:listener does not currently know of s
ervice requested in connect descriptor
can anybody help on this.

Hi,
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
Action:
- Wait a moment and try to connect a second time.
- Check which services are currently known by the listener by executing: lsnrctl services <listener name>
- Check that the SERVICE_NAME parameter in the connect descriptor of the net service name used specifies a service known by the listener.
- If an easy connect naming connect identifier was used, check that the service name specified is a service known by the listener.
- Check for an event in the listener.log file.
Regards,
Tom

POST-QUERY trigger cannot retrieve the database field in TEMPLATE.fmb

I have tried to create a form using TEMPLATE.fmb in Oracle Apps R11i. I found that the POST-QUERY trigger cannot retrieve the database field (which is display item property) properly. Can anyone tell me how to retrieve the displayed database fields? Thanks for any helps.

POST-QUERY would fire after the query has been executed, it does not do the actual data retrieve.
See if the items you have put have the data source properties set and are not control items.
btw, this forum is for OA users, you would get better response to your query if you post it in forms forum
Thanks,
Tapash

Restoring the database from Coldbackup

Hi Gurus,
I have a cold back up files belongs to oracle 9i on Solaris 5.10. I wanted to restore the database and need to upgrade the Oracle 10g (10.2.0.3.0) on linux.
All these process need to handle with out RMAN. What are the prerequisite information need to collect on source and target systems.
Please guide me.
Thanks,
Tippu

Azar wrote:
Better install Oracle 10g on the new server and after import oracle 9i database into new server database.I would say that this depends on database size and database downtime that can be accepted: for small database and no short downtime constraint, I agree but for large database and limited downtime constraint this may not be a good choice.

Cannot Restore the The database backup in 2012

Similar Messages

Maybe you are looking for