Cannot resume from suspend to ram (fglrx)

Hello,
I have recently installed Catalyst drivers, instead of xf86-video-ati. I have laptop with PowerXPress(Intel/AMD hybrid graphics).
I can't resume after suspend to ram. System freezes with black screen, tty switching doesn't work and I have to shutdown by holding power button.
If I add "nomodeset" to GRUB, X fails to start. xorg.conf generated using "aticonfig --initial". Catalyst driver works fine.
DE/DM: KDE 4/kwin
Graphic cards: Intel HD Graphics 3000; AMD Radeon 7600M.
Laptop: HP pavillion g6 2004er.

Welcome to the forum!
Yes, some Lenovo employees do read and post to this forum.  Mark is quite active, and several others post as well.  In addition, there are lurkers who just read without making public comments although sometimes they ask the mod team to either gather more information or pass along advice.
However, here are the expectations of their participation from the Welcome message:
These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel.
The bottom line is there's no guarantee that you will get an answer to a question here directly from Lenovo. 
On the other hand, you just might!  ;-)
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

  • [SOLVED] Cannot resume from suspend but hibernate works fine

    Please help me figuring out what can be the issues..
    I cannot resume from suspend while "sudo pm-hibernate" works fine..
    When I use "sudo pm-suspend", the system (samsung N210 netbook) goes to sleep and I can see the power light blinking as expected. But, when I try to resume the system from suspend by pressing the power button, the screen remains black with no HDD activity. Only thing I can see is the power LED on.
    After I do "sudo pm-suspend" and try to resume from suspend but fails. So, I do a HARD reboot and then this is the content of  /var/log/pm-suspend.log
    Initial commandline parameters:
    Thu Dec 16 12:00:27 IST 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux archlinux-N210 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010 x86_64 Intel(R) Atom(TM) CPU N450 @ 1.66GHz GenuineIntel GNU/Linux
    Module Size Used by
    dm_mod 66662 0
    rfcomm 34874 4
    sco 8828 2
    bnep 8726 2
    l2cap 42585 16 rfcomm,bnep
    ipv6 281833 24
    nls_utf8 1288 0
    cifs 242984 0
    fscache 39915 1 cifs
    fuse 64259 3
    arc4 1378 2
    snd_seq_dummy 1431 0
    snd_hda_codec_realtek 275887 1
    uvcvideo 61404 0
    videodev 64318 1 uvcvideo
    v4l1_compat 15578 2 uvcvideo,videodev
    ecb 2041 2
    snd_seq_oss 28760 0
    ath9k 80424 0
    joydev 10055 0
    btusb 11385 2
    v4l2_compat_ioctl32 10212 1 videodev
    bluetooth 52419 9 rfcomm,sco,bnep,l2cap,btusb
    snd_seq_midi_event 5436 1 snd_seq_oss
    mac80211 196159 1 ath9k
    ath9k_common 3624 1 ath9k
    ath9k_hw 290909 2 ath9k,ath9k_common
    snd_hda_intel 22285 1
    snd_hda_codec 79384 2 snd_hda_codec_realtek,snd_hda_intel
    ath 8822 2 ath9k,ath9k_hw
    snd_seq 50082 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5297 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 39221 0
    cfg80211 143110 3 ath9k,mac80211,ath
    snd_hwdep 6110 1 snd_hda_codec
    uhci_hcd 21926 0
    easy_slow_down_manager 3185 0
    snd_mixer_oss 17106 2 snd_pcm_oss
    snd_pcm 71921 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    snd_timer 19265 2 snd_seq,snd_pcm
    cpufreq_powersave 958 0
    sky2 46293 0
    rfkill 15882 3 bluetooth,cfg80211
    led_class 2331 1 ath9k
    snd 57562 11 snd_hda_codec_realtek,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_seq,snd_seq_device,snd_pcm_oss,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
    psmouse 52592 0
    cpufreq_ondemand 8215 2
    soundcore 5969 2 snd
    ehci_hcd 36988 0
    tpm_tis 7928 0
    shpchp 26453 0
    sg 25652 0
    phc_intel 9527 1
    battery 10231 0
    tpm 10957 1 tpm_tis
    samsung_backlight 2844 0
    serio_raw 4486 0
    snd_page_alloc 7249 2 snd_hda_intel,snd_pcm
    usbcore 137570 5 uvcvideo,btusb,uhci_hcd,ehci_hcd
    ac 3105 0
    pci_hotplug 24319 1 shpchp
    tpm_bios 5505 1 tpm
    i2c_i801 8550 0
    freq_table 2323 2 cpufreq_ondemand,phc_intel
    pcspkr 1819 0
    thermal 12242 0
    evdev 8519 14
    processor 25936 1 phc_intel
    mperf 1243 1 phc_intel
    ext4 313574 1
    mbcache 5722 1 ext4
    jbd2 69002 1 ext4
    crc16 1297 2 l2cap,ext4
    sd_mod 25856 4
    ahci 20353 3
    libahci 17982 1 ahci
    libata 156316 2 ahci,libahci
    scsi_mod 124891 3 sg,sd_mod,libata
    i915 321187 3
    drm_kms_helper 25963 1 i915
    drm 175314 3 i915,drm_kms_helper
    i2c_algo_bit 4911 1 i915
    button 4834 1 i915
    i2c_core 18726 6 videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
    video 19305 1 i915
    output 1940 1 video
    intel_agp 29459 2 i915
    total used free shared buffers cached
    Mem: 2046212 603128 1443084 0 11400 258660
    -/+ buffers/cache: 333068 1713144
    Swap: 2250748 0 2250748
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend:
    /usr/lib/pm-utils/sleep.d/01laptop-mode suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /etc/pm/sleep.d/20_samsung-tools suspend suspend:
    /etc/pm/sleep.d/20_samsung-tools suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
    /usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Dec 16 12:00:31 IST 2010: performing suspend
    Since, the last time I checked about suspend was 1.5 months back, I cant really make out as to what package caused the issue as I had a few upgrades since that time.
    I am no expert but it seems like it is the log of suspending the system, it seems like the system didnt even go to initial stage of resuming.
    Last edited by shadyabhi (2010-12-27 17:54:19)

    Well this is a long shot... But my laptop had some issues with suspending due to low-power governors preventing it from fully working at times.
    Because of that I manually suspend with the following script:
    #!/bin/bash
    clear
    cpufreq-set -g performance
    cpufreq-info
    echo "Continue? y/n? ";read bevestiging
    if [ $bevestiging = "y" ]
    then
    echo "System going down for suspension NOW!"
    pm-suspend
    else
    echo "Exiting..."
    exit 0
    fi
    exit 0
    All it really does in the end, is change the governer from which it's currently on to "performance", thus allowing maximum clock speed.
    I've also added in a little confirmation dialog to check whether it's properly switched.
    Of course, this will only work for you if you're also using laptop-mode and cpufrequtils.
    Edit: You need to run this script with sudo or as the root user.
    Last edited by Aeva (2010-12-16 14:16:32)

  • System freeze after resume from suspend to RAM

    Hi,
    since quite a while (probably ever) I am unable to suspend my computer to RAM because everytime it freezes a few seconds after resuming, never to become alive again until a reboot. After some investigation, I managed to get kernel logs by taking a picture of my screen. The logs were not written to disk, hence I didn't see anything before. I had to write these by hand, I hope I didn't insert any mistakes:
    kernel: sas: Enter sas_scsi_recover_host busy: 2 failed: 2
    kernel: sas: trying to find task 0xfff880008b5b680
    kernel: sas: sas_scsi_find_task: aborting task 0xfff880008b5b680
    kernel: sas: sas_scsi_find_task: task 0xfff880008b5b680 is aborted
    kernel: sas: sas_eh_handle_sas_errors: task 0xfff880008b5b680 is aborted
    kernel: sas: trying to find task 0xffff8804606ccb40
    kernel: sas: sas_scsi_find_task: aborting task 0xffff8804606ccb40
    kernel: sas: sas_scsi_find_task: task 0xffff8804606ccb40 is aborted
    kernel: sas: sas_eh_handle_sas_errors: task 0xffff8804606ccb40 is aborted
    kernel: sas: ata7: end_device-0:0: cmd error handler
    kernel: sas: ata8: end_device-0:1: cmd error handler
    kernel: sas: ata7: end_device-0:0: dev error handler
    kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    kernel: ata7.00: failed command: READ VERIFY SECTOR(S)
    kernel: ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
    res 40/00:48:a0:79:88/00:00:07:00:00/40 Emask 0x4 (timeout)
    kernel: ata7.00: status { DRDY }
    kernel: ata7: hard resetting link
    kernel: sas: ata8: end_device-0:1: dev error handler
    kernel: ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    kernel: ata8.00: failed command: READ VERIFY SECTOR(S)
    kernel: ata8.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    kernel: ata8.00: status { DRDY }
    kernel: ata8: hard resetting link
    This issue seems to be related to disk failures like bad sectors but I am quite sure, that my SSDs are in a good shape. I ran some SMART tests, they all turned out to be okay. Suspending from my dual-booted Windows works fine as well (although if the bad sector would be on the linux partition, it would probably not affect Windows).
    Here's my setup:
    $ lsblk -St
    NAME HCTL TYPE VENDOR MODEL REV TRAN NAME ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE RA WSAME
    sda 1:0:0:0 disk ATA Corsair Force 3 2 sata sda 0 512 0 512 512 0 cfq 128 128 0B
    sdb 7:0:0:0 disk ST1000DM 003-9YN162 NDP3 usb sdb 0 512 0 512 512 1 cfq 128 128 0B
    sdc 0:0:0:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdc 0 512 0 512 512 0 cfq 128 128 0B
    sdd 0:0:1:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdd 0 512 0 512 512 0 cfq 128 128 0B
    sr0 2:0:0:0 rom TSSTcorp CDDVDW SH-222AL SB00 sata sr0 0 512 0 512 512 1 cfq 128 128 0B
    $ lsblk -f
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs Recovery 567437B974379B27
    ├─sda2 vfat DC2D-099E /boot
    ├─sda3
    ├─sda4 ntfs FEBED982BED933BD
    ├─sda5 ext4 arch 41bad924-84a2-4e0a-9cd4-4ea723a2a5a3 /
    └─sda6 swap 793fb3c1-8bec-4023-a7c3-ee94eee2e67a [SWAP]
    sdb
    └─sdb1 ntfs HDDRIVE2GO 2212E50812E4E231
    sdc
    └─sdc1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
    └─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
    sdd
    └─sdd1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
    └─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
    I am not sure which one of the disks causes the freeze but I assume it's the revodrive because the logs talk about two drives. The Revodrive internally holds two drives, which are set up to operate in a RAID 0. Windows is installed on the Corsair drive, and has no access to the Revodrive. However, I used to run Windows on the Revodrive a few years ago, and it worked just fine.
    Another interesting thing is that when I try to test suspend to RAM, the system does not freeze, nor produce errors. This only happens if none is written to /sys/power/pm_test (which means no automated wake-up, no testing).
    Any ideas on how I could narrow down this issue? Thanks a lot!
    EDIT
    I just checked and confirmed that this issue is originating from the OCZ Revodrive:
    $ dmesg | grep ata7.00 | head
    [ 7.136432] ata7.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
    [ 7.136436] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 7.146442] ata7.00: configured for UDMA/133
    $ dmesg | grep ata8.00 | head
    [ 7.310018] ata8.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
    [ 7.310023] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 7.320022] ata8.00: configured for UDMA/133
    Last edited by tuttiarch (2015-01-31 15:54:29)

    Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
    And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
    Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

  • Pc doesn't resume from suspend to ram anymore (new 3.4.2 kernel)

    hi.
    I was using nouveau without problem and with the little trick of using acpi_os_name="Microsoft Windows NT" kernel parameter, I was able to suspend to ram from gnome, and resume the pc without problem
    Not anymore. Now, if I suspend to ram, the pc does not resume. It correctly wake up the dvd drive, the hard-drive, began to read stuff on the hdd but the led of the power button stays blinking and the screen is not waken up.
    I am thinking this is due to the update of nouveau and a new regression but this seems related to the bios or hardware. For example. If after the broken resume, I hold down 10 seconds the power button to power off, and press it again to power on, the led is still blinking and it does not boot. I need to power off by removing the power cord.
    Is it because I run (to test it) the nvida-173xx, and that did something to the graphic card ?
    Did anyone got similar problem with the new nouveau driver ?
    I tried to downgrade libgl, libdrm, libdrm-nouveau, nouveau-dri, xf86-video-nouveau and mesa but I still got the problem. so ?
    I have a geforce 8300 GS. the pc is an inspiron 531
    Last edited by solstice (2012-06-18 08:56:49)

    Probably I have the same issue with geforce GTS250.
    After upgrading to kernel 3.4.2 or so, my system doesn't resume from suspend, only black screen and cannot switch to other ttys.
    I first thought this problem be caused by the kernel, but downgrading nvidia to 295.53-2 solved this problem on kernel 3.4.3 so this likely is caused by nvidia 302.17.
    In my case there is something like error in pm-suspend.log when resume failed:
    Fri Jun 22 05:36:12 JST: Awake.
    Fri Jun 22 05:36:12 JST: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /etc/pm/sleep.d/90alsa resume suspend:
    xcb_connection_has_error() returned true
    And curiously, if I had launched vlc media player before suspend, resume worked well even on nvidia 302.17.

  • OCZ Vertex 2 fails to fully resume from suspend to RAM

    I have installed an OCZ Vertex 2 60GB SSD in my laptop and I cannot resume normally from S3 using pm-suspend or any other method.  It looks like / isn't remounting, however it does seem that home is remounting. 
    I have flashed the firmware to the latest.  I tested suspend after a base install, with only acpi and hal (pm-utils being a dep for hal) and it failed. 
    Here is fstab, mtab, and fdisk -l.  If any other information is needed let me know. 
    Disk /dev/sda: 60.0 GB, 60022480896 bytes
    255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0xb8372fcd
    Device Boot Start End Blocks Id System
    /dev/sda1 2048 206847 102400 83 Linux
    /dev/sda2 206848 21178367 10485760 83 Linux
    /dev/sda3 21178368 117231407 48026520 83 Linux
    proc /proc proc rw,relatime
    sys /sys sysfs rw,relatime
    udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=502347,mode=755
    /dev/disk/by-uuid/fd40337d-ed8a-4e76-be3f-aa09f5558998 / ext4 rw,noatime,barrier=1,data=ordered,discard
    devpts /dev/pts devpts rw 0 0
    shm /dev/shm tmpfs rw,nosuid,nodev 0 0
    /dev/sda3 /home ext4 rw,noatime,discard 0 0
    /dev/sda1 /boot ext2 rw 0 0
    none /tmp tmpfs rw,nosuid,nodev,noatime,size=1000M,mode=1777 0 0
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    #/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
    #/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
    #/dev/fd0 /media/fl auto user,noauto 0 0
    UUID=8f046367-0eec-410f-b3b5-0e298e065c5e /home ext4 defaults,noatime,discard 0 1
    UUID=a6f6aa9a-e5d8-4763-ad75-0b0b6c549929 /boot ext2 defaults 0 1
    UUID=fd40337d-ed8a-4e76-be3f-aa09f5558998 / ext4 defaults,noatime,discard 0 1
    none /tmp tmpfs nodev,nosuid,noatime,size=1000M,mode=1777 0 0
    Here are some errors after suspend:
    http://img180.imageshack.us/f/fserror.jpg/
    http://yfrog.com/izfserror2j
    I've also been advised to try enter S1, however I'm not sure how to do that since power states don't seem to work like this anymore (since kernel 2.6):
    #echo 1 > sleep
    I'm very frustrated at this point and I will be extremely gracious for any advice on this problem

    I just successfully suspended to RAM.  I was redirecting the log file to text file to make sure it kept it.....here it is.  I'm going to check it out further to see if a package update fixed it, or if it was simply dumb luck.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Mon Nov 1 19:35:30 CDT 2010: performing suspend
    Initial commandline parameters:
    Thu Nov 4 00:54:33 CDT 2010: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux l33tpc 2.6.36-ARCH #1 SMP PREEMPT Sun Oct 31 09:29:11 CET 2010 x86_64 Genuine Intel(R) CPU U7300 @ 1.30GHz GenuineIntel GNU/Linux
    Module Size Used by
    cryptd 6262 0
    aes_x86_64 7412 1
    aes_generic 26170 1 aes_x86_64
    ipv6 281961 14
    ext2 63599 1
    usb_storage 42540 0
    uvcvideo 61404 0
    videodev 64318 1 uvcvideo
    v4l1_compat 15578 2 uvcvideo,videodev
    v4l2_compat_ioctl32 10212 1 videodev
    arc4 1378 2
    ecb 2041 2
    snd_hda_codec_intelhdmi 10645 1
    snd_hda_codec_realtek 275631 1
    i915 320893 2
    snd_seq_dummy 1431 0
    ath9k 79976 0
    snd_seq_oss 28760 0
    joydev 10055 0
    snd_seq_midi_event 5436 1 snd_seq_oss
    snd_hda_intel 22253 0
    snd_seq 50082 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5297 3 snd_seq_dummy,snd_seq_oss,snd_seq
    uhci_hcd 21926 0
    snd_hda_codec 79192 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
    mac80211 195924 1 ath9k
    drm_kms_helper 25963 1 i915
    snd_pcm_oss 39157 0
    snd_mixer_oss 17106 1 snd_pcm_oss
    ath9k_common 3496 1 ath9k
    snd_hwdep 6110 1 snd_hda_codec
    drm 175314 2 i915,drm_kms_helper
    ath9k_hw 289341 2 ath9k,ath9k_common
    snd_pcm 71921 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
    ath 8822 2 ath9k,ath9k_hw
    ehci_hcd 36860 0
    i2c_algo_bit 4911 1 i915
    asus_laptop 14243 0
    i2c_core 18726 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
    sparse_keymap 2563 1 asus_laptop
    snd_timer 19265 2 snd_seq,snd_pcm
    ac 3105 0
    vboxdrv 1740411 0
    battery 10039 0
    cfg80211 142886 3 ath9k,mac80211,ath
    snd 57562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_hda_intel,snd_seq_device,snd_pcm_oss,snd_hda_codec,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
    atl1c 31532 0
    video 19305 1 i915
    iTCO_wdt 10669 0
    sg 25652 0
    processor 25936 2
    rfkill 15882 2 asus_laptop,cfg80211
    soundcore 5969 1 snd
    psmouse 52592 0
    output 1940 1 video
    iTCO_vendor_support 1801 1 iTCO_wdt
    thermal 12242 0
    button 4834 1 i915
    usbcore 137506 5 usb_storage,uvcvideo,uhci_hcd,ehci_hcd
    evdev 8519 7
    serio_raw 4486 0
    intel_agp 29427 2 i915
    led_class 2331 2 ath9k,asus_laptop
    pcspkr 1819 0
    snd_page_alloc 7249 2 snd_hda_intel,snd_pcm
    ext4 313574 2
    mbcache 5722 2 ext2,ext4
    jbd2 69002 1 ext4
    crc16 1297 1 ext4
    sd_mod 25824 4
    ahci 20353 3
    libahci 17886 1 ahci
    libata 156316 2 ahci,libahci
    scsi_mod 124859 4 usb_storage,sg,sd_mod,libata
    total used free shared buffers cached
    Mem: 4020904 219844 3801060 0 22892 53336
    -/+ buffers/cache: 143616 3877288
    Swap: 0 0 0
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
    Having NetworkManager put all interaces to sleep...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
    /usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Nov 4 00:54:34 CDT 2010: performing suspend
    Thu Nov 4 00:57:50 CDT 2010: Awake.
    Thu Nov 4 00:57:50 CDT 2010: Running hooks for resume
    Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
    /usr/lib/pm-utils/sleep.d/95led resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
    /usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
    Reloaded unloaded modules.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
    Having NetworkManager wake interfaces back up...Done.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    Thu Nov 4 00:57:52 CDT 2010: Finished.
    It failed again.  I have compared the logs and the last entry is :
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Nov 4 01:24:45 CDT 2010: performing suspend
    Last edited by DarksideEE7 (2010-11-04 07:29:06)

  • [SOLVED] After resume from suspend to RAM, system is slow / unstable

    Hello,
    I have come across some strangeness when trying to suspend my system.  The
    computer is a lenovo U350.  I have read a lot of threads on these subjects,
    but I never found one that quite matched the experiences I'm having, so I felt
    compelled to make a new post.
    Here's what's going on:  I boot into the terminal, and then run pm-suspend.
    Within a few seconds, the computer goes to sleep, just as I had hoped.  The
    problem is that my computer seems a little groggy when I wake it back up.
    Usually, when running a command like ps aux | less, the screen fills up very
    quickly.  After I resume from sleep, running ps aux | less is noticeably slow.
    It takes a full second (+/- epsilon) to fill the screen.  Other symptoms: if I
    suspend / resume in the terminal, and then start a window manager (KDE), the
    graphics will be slow and choppy, and when I try to exit the window manager, I
    usually end up having to perform the dreaded REISUB after getting stuck on a
    blank screen with a non-blinking cursor in the upper left hand corner.
    Suspend / resume from KDE will result in either the black, non-responsive
    screen as soon as I try to resume, or in the choppy graphics, followed by the
    non-responsive black screen when I log out.
    I looked at the process list before and after, and noticed that when the
    system is first resumed, there are around 50-60 additional kworker processes
    running than when I put it to sleep.  I don't know if this is normal or not.
    Also, hci0 has been killed, and a new hci0 process has taken its place.  The
    same goes for one of the udevd processes.  About 40-50 of the kworker
    processes finish after a few minutes, but this does not change the slowness of
    ps aux | less, nor does it help with my window manager issues.
    I ran a few (not so precise) performance tests before and after doing a
    suspend, and got the same results (the test was just to compile some LaTeX,
    which took about 4-5 seconds either way).
    I examined the pm-suspend.log, and everything looked peachy.  All of the
    hooks returned success for the suspend, as well as the resume.  I'm happy to
    post this if needed.  I did not change any of the default settings for
    pm-suspend.
    Anyhow, I've read a lot of threads, and seen a lot of suggestions, e.g.:
    https://bbs.archlinux.org/viewtopic.php?id=137682
    https://bbs.archlinux.org/viewtopic.php?id=136292 (use vbetool?)
    https://bbs.archlinux.org/viewtopic.php?id=126174 (suspend tons of modules?)
    https://bbs.archlinux.org/viewtopic.php?id=131827 (hpet=disable ?)
    However, I'm not that confident in any of them, since no one had quite the
    same issue.  I was hoping that someone could point me in the right direction
    before I start blindly walking through all the candidate fixes and risk
    unleashing chaos into my system.  Many thanks in advance for your help.
    Oh, and in case this post was not yet long enough, here is some system
    information:
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection
    08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
    lsmod:
    Module Size Used by
    aes_x86_64 7508 3
    cryptd 8309 0
    aes_generic 26138 1 aes_x86_64
    coretemp 5590 0
    cpufreq_ondemand 6164 2
    acpi_cpufreq 5877 1
    mperf 1275 1 acpi_cpufreq
    freq_table 2515 2 acpi_cpufreq,cpufreq_ondemand
    arc4 1410 2
    joydev 9895 0
    snd_hda_codec_hdmi 24121 1
    iwlwifi 248196 0
    i915 420018 3
    snd_hda_codec_conexant 47300 1
    uvcvideo 64311 0
    mac80211 228527 1 iwlwifi
    videodev 82101 1 uvcvideo
    snd_hda_intel 23375 0
    snd_hda_codec 89389 3 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi
    broadcom 7270 0
    tg3 134884 0
    ideapad_laptop 8534 0
    snd_hwdep 6389 1 snd_hda_codec
    snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
    snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
    snd_timer 19544 1 snd_pcm
    snd 59214 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi
    iTCO_wdt 11885 0
    v4l2_compat_ioctl32 8316 1 videodev
    i2c_i801 8187 0
    i2c_algo_bit 5263 1 i915
    drm_kms_helper 26137 1 i915
    intel_agp 10904 1 i915
    btusb 11385 0
    cfg80211 172260 2 mac80211,iwlwifi
    bluetooth 151999 1 btusb
    sparse_keymap 3120 1 ideapad_laptop
    soundcore 6210 1 snd
    drm 188499 4 drm_kms_helper,i915
    rfkill 15498 3 bluetooth,cfg80211,ideapad_laptop
    serio_raw 4429 0
    iTCO_vendor_support 1961 1 iTCO_wdt
    media 10597 2 videodev,uvcvideo
    psmouse 61311 0
    libphy 16985 2 tg3,broadcom
    i2c_core 20492 6 drm,drm_kms_helper,i2c_algo_bit,i2c_i801,videodev,i915
    intel_gtt 14519 3 intel_agp,i915
    pcspkr 1819 0
    evdev 9530 8
    thermal 7799 0
    wmi 8475 0
    battery 6453 0
    ac 2344 0
    video 11164 1 i915
    button 4470 1 i915
    processor 25582 3 acpi_cpufreq
    ext4 420412 3
    crc16 1359 2 ext4,bluetooth
    jbd2 71499 1 ext4
    mbcache 5881 1 ext4
    sd_mod 28307 5
    ahci 20037 4
    libahci 19559 1 ahci
    libata 166654 2 libahci,ahci
    scsi_mod 133676 2 libata,sd_mod
    uhci_hcd 23116 0
    ehci_hcd 40698 0
    usbcore 146113 5 ehci_hcd,uhci_hcd,btusb,uvcvideo
    usb_common 954 1 usbcore
    Last edited by wes (2012-04-06 21:34:43)

    I did try reinstalling, actually.  But I did not think to remove the battery and the ram...  I'm very curious now: what is the rationale / intuition for that?  Or is it just that empirical evidence suggests this may be a good idea?
    Anyhow, the reinstall by itself did not help.  I tried it out with a pretty bare-bones setup and had the same results.  Here are a few other things I noticed:
    - After the suspend, one of the cores is always running at the maximum clock frequency, according to powertop (although, according to ps aux, no one is doing any work).
    - Even if I ssh to a nearby machine, I get the same experience when running `ls`.  The screen fills very slowly.  That narrows things down a little bit, but I was already guessing it would be graphics-related.
    I have also tried a few random kernel boot parameters after reading things online, but none of those worked, and several stopped the machine from booting at all.
    Thanks for your help.

  • Resume from suspend to ram fails (pm-utils)

    Hi,
    When I suspend to ram the computer seems to suspend normally, but the resume fails and it triggers a normal boot instead.
    I'm on a Lenovo Thinkpad X60 laptop with the 2.6.30 kernel and gnome-power-manager (pm-utils).

    Unfortunately, every laptop seems to have its own idiosyncrasies with this (not to mention differences in different users' setups---e.g., what devices are attached, what modules are loaded). So it takes some serious trial and error to figure out how to get this to work. All I can suggest is that you become intimately familiar with the wiki page, and with the HAL quirks site, and that you try to eliminate all the daemons and so on you can while still generating the problem (e.g., boot into a virtual console instead of gnome, if you're comfortable with that). Then start a process of trying different quirks as explained on those webpages. Take good notes so you don't lose track of which combinations of quirks show result in what behavior.
    The HAL quirks site will also point you to what other users using your laptop, or similar laptops, found to work. But trial and error may still be necessary.

  • Cannot resume from suspend when done with acpi (close lid)

    This is my /etc/acpi/handler.sh
    #!/bin/sh
    # Default acpi script that takes an entry for all actions
    # NOTE: This is a 2.6-centric script. If you use 2.4.x, you'll have to
    # modify it to not use /sys
    minspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq`
    maxspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq`
    setspeed="/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed"
    set $*
    case "$1" in
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF) logger "PowerButton pressed: $2" ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/sleep)
    case "$2" in
    SLPB) echo -n mem >/sys/power/state ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000000)
    echo -n $minspeed >$setspeed
    #/etc/laptop-mode/laptop-mode start
    00000001)
    echo -n $maxspeed >$setspeed
    #/etc/laptop-mode/laptop-mode stop
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    battery)
    case "$2" in
    BAT0)
    case "$4" in
    00000000) #echo "offline" >/dev/tty5
    00000001) #echo "online" >/dev/tty5
    esac
    CPU0)
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/lid)
    #echo "LID switched!">/dev/tty5
    /usr/sbin/pm-suspend
    logger "ACPI group/action undefined: $1 / $2"
    esac
    The only thing I added was the /usr/sbin/pm-suspend.
    When I run /usr/sbin/pm-suspend from a terminal, the suspend works fine, but when I try to use the close lid suspend I have trouble resuming. When I open the lid, the laptop starts making noises and lights up (as if it were to resume), but after a while it goes and suspends again.
    Pushing the power button to try to resume (this is how I successfully resumed from the commandline suspend) causes the same behavior to happen, so I ended up just holding down the power button and rebooting.
    I tried commenting the /usr/sbin/pm-suspend, and uncommented the default echo line. This caused "LID switched!" to be displayed 3 times on /dev/tty5; each one on the next line further to the right. I'm not sure if that is supposed to be normal behaviour.

    Hi, sorry my fault. I should have been more specific. Here my full handler.sh
    #!/bin/sh
    # Default acpi script that takes an entry for all actions
    # NOTE: This is a 2.6-centric script. If you use 2.4.x, you'll have to
    # modify it to not use /sys
    minspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq`
    maxspeed=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq`
    setspeed="/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed"
    set $*
    case "$1" in
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF) logger "PowerButton pressed: $2"
    /usr/sbin/pm-suspend ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/sleep)
    case "$2" in
    SLPB) logger "SleepButton pressed: $2"
    /usr/sbin/pm-suspend ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000000)
    echo -n $minspeed >$setspeed
    #/etc/laptop-mode/laptop-mode start
    00000001)
    echo -n $maxspeed >$setspeed
    #/etc/laptop-mode/laptop-mode stop
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    battery)
    case "$2" in
    BAT0)
    case "$4" in
    00000000) #echo "offline" >/dev/tty5
    00000001) #echo "online" >/dev/tty5
    esac
    CPU0)
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/lid)
    #echo "LID switched!">/dev/tty5
    logger "ACPI lid switched $1 $2"
    if grep -q closed /proc/acpi/button/lid/LID0/state
    then
    logger "ACPI lid closed"
    /usr/sbin/pm-suspend
    else
    logger "ACPI lid opened"
    echo -n 2 > /proc/acpi/video/EGFX/LCD0/brightness
    fi
    logger "ACPI group/action undefined: $1 / $2"
    esac
    HTH.

  • Bus/io errors after resume from suspend to ram

    Something very strange happened today. When I woke my computer out of suspend today, the BIOS made a bad beep sound (once, high pitched, the error kind of), but booted anyways.
    After starting up, I tried starting programs like sonata, gnome-mplayer, but both failed with either an "io error" or "bus error". Strangly, I also tested "df" an it worked.
    That happened the first time, but I'm worried it's gonna happen again, because I have NO idea what could have failed.
    pm-suspend log looks fine
    Initial commandline parameters:
    Sa 27. Mär 02:30:54 CET 2010: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
    success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux segfault 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:44:03 CET 2010 x86_64 AMD Phenom(tm) II X4 940 Processor AuthenticAMD GNU/Linux
    Module                  Size  Used by
    it87                   18948  0
    hwmon_vid               2756  1 it87
    ipv6                  283335  30
    nfs                   295530  0
    lockd                  65788  1 nfs
    fscache                39679  1 nfs
    nfs_acl                 2335  1 nfs
    auth_rpcgss            40448  1 nfs
    sunrpc                186318  5 nfs,lockd,nfs_acl,auth_rpcgss
    nvidia               9515743  48
    cryptd                  6076  0
    aes_x86_64              7420  1
    aes_generic            26178  1 aes_x86_64
    fuse                   58757  2
    joydev                  9800  0
    usbhid                 38471  0
    hid                    75813  1 usbhid
    arc4                    1354  2
    ecb                     1953  2
    snd_seq_dummy           1439  0
    snd_seq_oss            29023  0
    snd_seq_midi_event      5316  1 snd_seq_oss
    snd_seq                50558  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device          5181  3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss            39011  0
    snd_mixer_oss          17299  1 snd_pcm_oss
    nouveau               428060  0
    ttm                    46450  1 nouveau
    drm_kms_helper         23817  1 nouveau
    drm                   159774  3 nouveau,ttm,drm_kms_helper
    i2c_algo_bit            4935  1 nouveau
    snd_ctxfi              90523  1
    ath5k                 125370  0
    ohci_hcd               21485  0
    snd_pcm                70222  2 snd_pcm_oss,snd_ctxfi
    mac80211              166738  1 ath5k
    ath                     8400  1 ath5k
    snd_timer              18799  2 snd_seq,snd_pcm
    cfg80211              122783  3 ath5k,mac80211,ath
    rfkill                 15228  1 cfg80211
    edac_core              34056  0
    snd                    57408  10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ctxfi,snd_pcm,snd_timer
    soundcore               6095  1 snd
    snd_page_alloc          7033  2 snd_ctxfi,snd_pcm
    edac_mce_amd            6785  0
    led_class               2577  1 ath5k
    firewire_ohci          23601  0
    firewire_core          43019  1 firewire_ohci
    crc_itu_t               1273  1 firewire_core
    ppdev                   5910  0
    i2c_piix4               8680  0
    ehci_hcd               35082  0
    usbcore               140517  4 usbhid,ohci_hcd,ehci_hcd
    i2c_core               18137  6 nvidia,nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
    r8169                  36214  0
    mii                     3738  1 r8169
    parport_pc             31260  1
    button                  4714  1 nouveau
    thermal                11834  0
    evdev                   8825  10
    sg                     25275  0
    lp                      8684  0
    parport                29923  3 ppdev,parport_pc,lp
    pcspkr                  1795  0
    cpufreq_ondemand        8101  0
    powernow_k8            11886  0
    freq_table              2331  2 cpufreq_ondemand,powernow_k8
    processor              30310  1 powernow_k8
    rtc_cmos                8904  0
    rtc_core               14631  1 rtc_cmos
    rtc_lib                 1810  1 rtc_core
    ext3                  125021  2
    jbd                    46334  1 ext3
    mbcache                 5466  1 ext3
    sr_mod                 15043  0
    cdrom                  36354  1 sr_mod
    sd_mod                 26313  5
    pata_acpi               3288  0
    ata_generic             3111  0
    ahci                   34929  4
    pata_atiixp             3633  0
    floppy                 55998  0
    libata                152308  4 pata_acpi,ata_generic,ahci,pata_atiixp
    scsi_mod               92676  4 sg,sr_mod,sd_mod,libata
                 total       used       free     shared    buffers     cached
    Mem:       2056776    1645468     411308          0     590048     414652
    -/+ buffers/cache:     640768    1416008
    Swap:       522072       5776     516296
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: :: default down    [BUSY]    [DONE]
    success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Sa 27. Mär 02:30:56 CET 2010: performing suspend
    Any other useful log files to check out?
    I just put the system to sleep and woke it up again, no problem. I only notice that yesterday it took way longer than usual to go into sleep mode. Except for funky graphic patterns, all worked flawlessy now.
    What could cause bus and io errors after wakeup?
    Last edited by Sadface (2010-03-27 10:55:35)

    Yes, im using systemd. I tried also downgrading xf86-video-intel to a version from some weeks ago, with no result.
    PS: no difference between systemclt suspend or pm-suspend from comand line.ùù
    PS2: I tried fluxbox session and there was no flickering, so it had to be something kde-session related, and I found it: it was the image pile xscreensaver, just switching to another one solved my problem.
    Thanks for your interest, wonderwoofy!
    Update: nothing solved, it was just temporarly by case... same issue as before...
    Last edited by steff (2012-11-09 21:04:39)

  • Cannot resume from suspend on Asus F5R

    Asus F5R laptop
    uname -r: 3.1.7-1-ARCH
    radeon driver
    When using pm-suspend, the computer suspends as it's supposed to do. However, when I try to resume it again, the screen is blank. I can hear the HDD and fans spin up, but the screen is still blank.
    pm-suspend.log:
    Initial commandline parameters:
    Thu Jan 5 00:06:39 CET 2012: Running hooks for suspend.
    Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
    Linux localhost 3.1.6-1-ARCH #1 SMP PREEMPT Thu Dec 22 08:52:33 UTC 2011 i686 Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz GenuineIntel GNU/Linux
    Module Size Used by
    cryptd 6925 0
    aes_i586 6940 1
    aes_generic 25702 1 aes_i586
    ipv6 247457 10
    joydev 7439 0
    arc4 1086 2
    b43 301586 0
    mac80211 196411 1 b43
    snd_hda_codec_si3054 2866 1
    uas 6440 0
    usb_storage 35343 0
    snd_hda_codec_realtek 211044 1
    cfg80211 142604 2 b43,mac80211
    bcma 14319 1 b43
    radeon 913985 2
    ttm 45685 1 radeon
    psmouse 56772 0
    ssb 41907 1 b43
    snd_hda_intel 19293 0
    snd_hda_codec 69829 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4942 1 snd_hda_codec
    snd_pcm 60207 3 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec
    drm_kms_helper 22237 1 radeon
    ati_agp 4545 0
    drm 149266 4 radeon,ttm,drm_kms_helper
    agpgart 22287 3 ttm,ati_agp,drm
    serio_raw 3390 0
    snd_timer 15438 1 snd_pcm
    mmc_core 66997 2 b43,ssb
    snd 43817 7 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    pcmcia 31534 2 b43,ssb
    pcmcia_core 10114 1 pcmcia
    atl2 20345 0
    soundcore 5018 1 snd
    i2c_piix4 7084 0
    snd_page_alloc 5869 2 snd_hda_intel,snd_pcm
    videodev 77028 0
    media 8609 1 videodev
    asus_laptop 11994 0
    i2c_algo_bit 4423 1 radeon
    sp5100_tco 3760 0
    sparse_keymap 2660 1 asus_laptop
    evdev 7278 7
    shpchp 22497 0
    pci_hotplug 22072 1 shpchp
    processor 21844 2
    i2c_core 16816 6 radeon,drm_kms_helper,drm,i2c_piix4,videodev,i2c_algo_bit
    rfkill 12470 2 cfg80211,asus_laptop
    thermal 6531 0
    pcspkr 1375 0
    button 3614 0
    battery 5053 0
    ac 1796 0
    video 9716 0
    ext4 341420 1
    mbcache 4281 1 ext4
    jbd2 59633 1 ext4
    crc16 1091 1 ext4
    sr_mod 13244 0
    cdrom 31405 1 sr_mod
    sd_mod 26147 3
    pata_acpi 2388 0
    ahci 17497 2
    libahci 16783 1 ahci
    pata_atiixp 2920 0
    libata 146596 4 pata_acpi,ahci,libahci,pata_atiixp
    ohci_hcd 19226 0
    ehci_hcd 36074 0
    scsi_mod 112473 5 uas,usb_storage,sr_mod,sd_mod,libata
    usbcore 120796 5 uas,usb_storage,ohci_hcd,ehci_hcd
    total used free shared buffers cached
    Mem: 1935344 628024 1307320 0 46344 285940
    -/+ buffers/cache: 295740 1639604
    Swap: 1048508 0 1048508
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
    Running hook /etc/pm/sleep.d/90alsa suspend suspend:
    /etc/pm/sleep.d/90alsa suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
    /usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
    Kernel modesetting video driver detected, not using quirks.
    /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
    Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
    kernel.acpi_video_flags = 0
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
    Thu Jan 5 00:06:47 CET 2012: performing suspend
    dmesg | grep Hibernation (both with and without resume hook enabled):
    [ 0.928657] PM: Hibernation image not present or could not be loaded.
    So far I've tried passing hpet=disable to the kernel and rebuilding the initramfs with resume hook, all to no avail.
    If you need any more info for helping me, please let me know.
    PS.
    I've viewed all other threads as well, but they're not relevant to me.
    PPS.
    Resuming has never worked on this laptop, so it's not related to my current kernel version.
    Last edited by snufkin (2012-01-07 15:27:29)

    Ok, thats bad luck really. Further bits to try:
    Have you followed this about vbe tool as well?
    How about these bits about acpi also. Maybe you should try that with the LTS kernel.
    Further (wild guess)  S3 kernel options perhaps to try still (see here? 
    How about a bios update? asus does such often.

  • System freeze after resume from suspend

    I am running arch for about 5 month now and I always had freezes after resuming from suspend (to ram - systemctl suspend) every once in a while (like once a week or less). The freezes increased massively over the last month or so and for about 2 weeks now it happens 95% of the times I resume from suspend.
    The monitor turns on and shows things exactly how I left them, but is completely unresponsible EXCEPT for I can switch to another TTY (Ctrl+Shift+F*), however I cannot type or do anything in it...
    It doesnt have anything to do with the X server as it also happens after I suspend from TTY (without any X running).
    I also checked journalctl -b -1 (shows previous boot, since I always have to hard-reset the system) but it doesnt show anything after:
    Mar 13 17:16:54 Ununhaswellium systemd-sleep[3624]: Suspending system...
    (the suspend event before resuming)
    Are there any log files that could give a hint on what exactly goes on after the resume?
    Im running the latest official 3.13.6-1 kernel and updated my BIOS to the latest beta version yesterday - didnt help either...
    Ive read pretty much every thread on the internet by now about freezes after resume from suspend but none really helped
    Last edited by CharlieBra7o (2014-03-15 09:58:51)

    Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
    And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
    Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

  • Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

    Hiya!
    This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
    How to replicate the issue:
    Open a file from a network share.
    Edit file.
    Leave computer on with file open. Computer goes to sleep or into stand-by mode.
    Wait a bit
    Wake up computer
    CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
    What I've tried:
    http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
    http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
    Work Around:
    I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
    Please let me know how I can alleviate this issue!
    Thanks
    -Chris

    Hi,
    Are those problematic documents created via previous versions of Office?
    Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
    http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
    Regards,
    Steve Fan
    TechNet Community Support

  • Sometimes it doesn't resume from suspend

    Hey! As you may guess (!), I'm new to this. But I love the idea of learning.
    Anyway, I have a laptop Acer Aspire 7741G-6426 and I'm having a little problem. See, I first installed XFCE4 with SLIM as a WM, the problem was that I couldn't resume from suspend (or sleep), all I got was a black screen. After that, I enabled autologin to XFCE, and just to tried one more time, I suspended, and the problem was 'solved'. I could resume without problems.
    I'm on a fresh install now, with KDE and the same problem happened before I enabled autologin in KDM (before enabling it, the same problem described above occurred). I can suspend and resume. That is, most of the time. An hour ago I suspended the laptop, and my surprise was to find the black screen again when trying to resume. When I resumed, the disk seemed to load something and then stopped and all I could see was a black screen, the same as before. The only thing I can do when that happens is to hard shutdown the PC.
    A few minutes ago I tried again, and resumed without problems. But I'm afraid it might happen again and I might lose something important. I need to find a solution.
    Also, I have an AMD 6550M video card and I'm using the Catalyst driver (because the open source made the laptop too hot).
    I don't know if this is related, but if I run "lsmod | grep radeon", this is the output:
    radeon 989731 0
    ttm 54560 1 radeon
    drm_kms_helper 27529 1 radeon
    drm 181991 3 radeon,ttm,drm_kms_helper
    i2c_algo_bit 5239 1 radeon
    i2c_core 20165 6 videodev,radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
    Is it normal that the radeon driver is loaded? Isn't that the open source one, which I didn't installed?
    Anyway, does anyone have any idea of what this is?
    I don't know what kind of information I should give.
    Oh, and I've been reading some logs (which I'm making myself believe I can understand, haha), and in pm-suspend.log, almost everything says "resume suspend: success", except for:
    Running hook /etc/pm/sleep.d/90alsa resume suspend:
    ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
    aplay: main:660: audio open error: Connection refused
    In kernel.log, there are many (specially 'dhcpcd not running'):
    Jun 29 20:03:43 localhost kernel: [ 8233.952493] ath: txq: ffff88012c2068d0 axq_qnum: 2, mac80211_qnum: 2 axq_link: ffff8800bac25ea8 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0 Attempting to restart tx logic.
    Jun 29 23:34:01 localhost kernel: [ 6.727474] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
    Jun 29 23:34:01 localhost kernel: [ 6.904533] acer_wmi: Unable to detect available WMID devices
    Jun 29 23:34:14 localhost dhcpcd[955]: dhcpcd not running
    Jun 29 23:34:30 localhost pulseaudio[1155]: pid.c: Daemon already running.
    And also, sorry for my english (and such a long post)!
    Thanks anyway.

    After so many days without the problem, I got the black screen of death minutes ago. I suspended and about 40 minutes later tried to resume and got the black screen. At least this time the wifi led was on and the disk seemed more active than other times. Though unfortunately I couldn't ssh into the laptop since I didn't have sshd enabled... But I could use the SysRq key, and for the first time, I got the "ASIC hang happened". I'm thinking that this might have something to do with the "nopat" line. Since before I added this line, the wifi led was off, there was no disk activity (past the first 3-4 seconds when trying to resume) and the SysRq key wouldn't work, so I had to hard shutdown. So at least now the SysRq key works, that's something.
    This is the full log from the failed resume:
    Jul 14 23:46:20 localhost kernel: [ 8505.476150] PM: Syncing filesystems ... done.
    Jul 14 23:46:20 localhost kernel: [ 8505.477733] PM: Preparing system for mem sleep
    Jul 14 23:46:20 localhost kernel: [ 8505.477749] Freezing user space processes ... (elapsed 0.01 seconds) done.
    Jul 14 23:46:20 localhost kernel: [ 8505.488608] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    Jul 14 23:46:20 localhost kernel: [ 8505.501902] PM: Entering mem sleep
    Jul 14 23:46:20 localhost kernel: [ 8505.502003] Suspending console(s) (use no_console_suspend to debug)
    Jul 14 23:46:20 localhost kernel: [ 8505.551975] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Jul 14 23:46:20 localhost kernel: [ 8505.629234] HDA Intel 0000:02:00.1: PCI INT B disabled
    Jul 14 23:46:20 localhost kernel: [ 8505.629293] ACPI handle has no context!
    Jul 14 23:46:20 localhost kernel: [ 8505.629299] ehci_hcd 0000:00:1d.0: PCI INT A disabled
    Jul 14 23:46:20 localhost kernel: [ 8505.629321] [fglrx] IRQ 44 Disabled
    Jul 14 23:46:20 localhost kernel: [ 8505.629468] [fglrx] Preparing suspend fglrx in kernel.
    Jul 14 23:46:20 localhost kernel: [ 8505.629964] ehci_hcd 0000:00:1a.0: PCI INT A disabled
    Jul 14 23:46:20 localhost kernel: [ 8505.637746] kworker/u:29: page allocation failure. order:10, mode:0x4020
    Jul 14 23:46:20 localhost kernel: [ 8505.637749] Pid: 8403, comm: kworker/u:29 Tainted: P 2.6.39-ARCH #1
    Jul 14 23:46:20 localhost kernel: [ 8505.637751] Call Trace:
    Jul 14 23:46:20 localhost kernel: [ 8505.637759] [<ffffffff810fc30f>] __alloc_pages_nodemask+0x78f/0x8c0
    Jul 14 23:46:20 localhost kernel: [ 8505.637762] [<ffffffff81132673>] alloc_pages_current+0xa3/0x110
    Jul 14 23:46:20 localhost kernel: [ 8505.637766] [<ffffffff810f821e>] __get_free_pages+0xe/0x50
    Jul 14 23:46:20 localhost kernel: [ 8505.637769] [<ffffffff8113d81f>] kmalloc_order_trace+0x3f/0x100
    Jul 14 23:46:20 localhost kernel: [ 8505.637805] [<ffffffffa06c1cf3>] ? __start_CPDMA_copy_evergreen+0xa3/0xc0 [fglrx]
    Jul 14 23:46:20 localhost kernel: [ 8505.637808] [<ffffffff8113da77>] __kmalloc+0x197/0x1a0
    Jul 14 23:46:20 localhost kernel: [ 8505.637820] [<ffffffffa069438e>] KCL_MEM_SmallBufferAllocAtomic+0x1e/0x20 [fglrx]
    Jul 14 23:46:20 localhost kernel: [ 8505.637836] [<ffffffffa06a7da3>] firegl_save_fb+0x233/0x360 [fglrx]
    Jul 14 23:46:20 localhost kernel: [ 8505.637853] [<ffffffffa06a6f35>] ? firegl_pm_save_framebuffer+0x1f5/0x280 [fglrx]
    Jul 14 23:46:20 localhost kernel: [ 8505.637869] [<ffffffffa06a9b2d>] ? firegl_cail_powerdown+0x8d/0x200 [fglrx]
    Jul 14 23:46:20 localhost kernel: [ 8505.637879] [<ffffffffa0691fc7>] ? fglrx_pci_suspend+0x87/0x150 [fglrx]
    Jul 14 23:46:20 localhost kernel: [ 8505.637884] [<ffffffff812390f6>] ? pci_legacy_suspend+0x46/0xe0
    Jul 14 23:46:20 localhost kernel: [ 8505.637886] [<ffffffff8123a3ad>] ? pci_pm_suspend+0xdd/0x130
    Jul 14 23:46:20 localhost kernel: [ 8505.637890] [<ffffffff812e5b35>] ? pm_op+0x175/0x1c0
    Jul 14 23:46:20 localhost kernel: [ 8505.637892] [<ffffffff812e5c32>] ? __device_suspend+0xb2/0x1a0
    Jul 14 23:46:20 localhost kernel: [ 8505.637896] [<ffffffff81085b50>] ? async_schedule+0x20/0x20
    Jul 14 23:46:20 localhost kernel: [ 8505.637898] [<ffffffff812e5d41>] ? async_suspend+0x21/0x50
    Jul 14 23:46:20 localhost kernel: [ 8505.637900] [<ffffffff81085bcf>] ? async_run_entry_fn+0x7f/0x180
    Jul 14 23:46:20 localhost kernel: [ 8505.637903] [<ffffffff81077f6e>] ? process_one_work+0x11e/0x4c0
    Jul 14 23:46:20 localhost kernel: [ 8505.637905] [<ffffffff810788ff>] ? worker_thread+0x15f/0x350
    Jul 14 23:46:20 localhost kernel: [ 8505.637907] [<ffffffff810787a0>] ? manage_workers.isra.29+0x230/0x230
    Jul 14 23:46:20 localhost kernel: [ 8505.637909] [<ffffffff8107d6ec>] ? kthread+0x8c/0xa0
    Jul 14 23:46:20 localhost kernel: [ 8505.637912] [<ffffffff813e9fe4>] ? kernel_thread_helper+0x4/0x10
    Jul 14 23:46:20 localhost kernel: [ 8505.637914] [<ffffffff8107d660>] ? kthread_worker_fn+0x190/0x190
    Jul 14 23:46:20 localhost kernel: [ 8505.637915] [<ffffffff813e9fe0>] ? gs_change+0x13/0x13
    Jul 14 23:46:20 localhost kernel: [ 8505.637917] Mem-Info:
    Jul 14 23:46:20 localhost kernel: [ 8505.637918] Node 0 DMA per-cpu:
    Jul 14 23:46:20 localhost kernel: [ 8505.637919] CPU 0: hi: 0, btch: 1 usd: 0
    Jul 14 23:46:20 localhost kernel: [ 8505.637921] CPU 1: hi: 0, btch: 1 usd: 0
    Jul 14 23:46:20 localhost kernel: [ 8505.637922] CPU 2: hi: 0, btch: 1 usd: 0
    Jul 14 23:46:20 localhost kernel: [ 8505.637923] CPU 3: hi: 0, btch: 1 usd: 0
    Jul 14 23:46:20 localhost kernel: [ 8505.637924] Node 0 DMA32 per-cpu:
    Jul 14 23:46:20 localhost kernel: [ 8505.637925] CPU 0: hi: 186, btch: 31 usd: 18
    Jul 14 23:46:20 localhost kernel: [ 8505.637927] CPU 1: hi: 186, btch: 31 usd: 185
    Jul 14 23:46:20 localhost kernel: [ 8505.637928] CPU 2: hi: 186, btch: 31 usd: 1
    Jul 14 23:46:20 localhost kernel: [ 8505.637929] CPU 3: hi: 186, btch: 31 usd: 45
    Jul 14 23:46:20 localhost kernel: [ 8505.637930] Node 0 Normal per-cpu:
    Jul 14 23:46:20 localhost kernel: [ 8505.637931] CPU 0: hi: 186, btch: 31 usd: 185
    Jul 14 23:46:20 localhost kernel: [ 8505.637932] CPU 1: hi: 186, btch: 31 usd: 158
    Jul 14 23:46:20 localhost kernel: [ 8505.637934] CPU 2: hi: 186, btch: 31 usd: 151
    Jul 14 23:46:20 localhost kernel: [ 8505.637935] CPU 3: hi: 186, btch: 31 usd: 44
    Jul 14 23:46:20 localhost kernel: [ 8505.637938] active_anon:264255 inactive_anon:50599 isolated_anon:0
    Jul 14 23:46:20 localhost kernel: [ 8505.637939] active_file:81821 inactive_file:445828 isolated_file:0
    Jul 14 23:46:20 localhost kernel: [ 8505.637939] unevictable:0 dirty:11 writeback:0 unstable:0
    Jul 14 23:46:20 localhost kernel: [ 8505.637940] free:33258 slab_reclaimable:12432 slab_unreclaimable:5104
    Jul 14 23:46:20 localhost kernel: [ 8505.637941] mapped:66993 shmem:1158 pagetables:7761 bounce:0
    Jul 14 23:46:20 localhost kernel: [ 8505.637942] Node 0 DMA free:15780kB min:264kB low:328kB high:396kB active_anon:0kB inactive_anon:64kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15676kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:48kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
    Jul 14 23:46:20 localhost kernel: [ 8505.637948] lowmem_reserve[]: 0 2989 3872 3872
    Jul 14 23:46:20 localhost kernel: [ 8505.637950] Node 0 DMA32 free:98084kB min:51956kB low:64944kB high:77932kB active_anon:912996kB inactive_anon:57860kB active_file:243344kB inactive_file:1551960kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3060784kB mlocked:0kB dirty:24kB writeback:0kB mapped:64464kB shmem:3904kB slab_reclaimable:30264kB slab_unreclaimable:2868kB kernel_stack:632kB pagetables:9772kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
    Jul 14 23:46:20 localhost kernel: [ 8505.637956] lowmem_reserve[]: 0 0 883 883
    Jul 14 23:46:20 localhost kernel: [ 8505.637958] Node 0 Normal free:19168kB min:15360kB low:19200kB high:23040kB active_anon:144024kB inactive_anon:144472kB active_file:83940kB inactive_file:231352kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:904960kB mlocked:0kB dirty:20kB writeback:0kB mapped:203508kB shmem:728kB slab_reclaimable:19464kB slab_unreclaimable:17540kB kernel_stack:2064kB pagetables:21224kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
    Jul 14 23:46:20 localhost kernel: [ 8505.637964] lowmem_reserve[]: 0 0 0 0
    Jul 14 23:46:20 localhost kernel: [ 8505.637965] Node 0 DMA: 1*4kB 0*8kB 0*16kB 1*32kB 2*64kB 2*128kB 2*256kB 1*512kB 2*1024kB 2*2048kB 2*4096kB = 15780kB
    Jul 14 23:46:20 localhost kernel: [ 8505.637970] Node 0 DMA32: 3368*4kB 1866*8kB 1033*16kB 584*32kB 119*64kB 45*128kB 20*256kB 9*512kB 9*1024kB 1*2048kB 0*4096kB = 97984kB
    Jul 14 23:46:20 localhost kernel: [ 8505.637974] Node 0 Normal: 88*4kB 179*8kB 357*16kB 133*32kB 32*64kB 4*128kB 3*256kB 4*512kB 0*1024kB 1*2048kB 0*4096kB = 19176kB
    Jul 14 23:46:20 localhost kernel: [ 8505.637978] 528820 total pagecache pages
    Jul 14 23:46:20 localhost kernel: [ 8505.637979] 0 pages in swap cache
    Jul 14 23:46:20 localhost kernel: [ 8505.637981] Swap cache stats: add 8, delete 8, find 0/0
    Jul 14 23:46:20 localhost kernel: [ 8505.637982] Free swap = 4000116kB
    Jul 14 23:46:20 localhost kernel: [ 8505.637982] Total swap = 4000148kB
    Jul 14 23:46:20 localhost kernel: [ 8505.648067] 1015792 pages RAM
    Jul 14 23:46:20 localhost kernel: [ 8505.648069] 95954 pages reserved
    Jul 14 23:46:20 localhost kernel: [ 8505.648069] 452085 pages shared
    Jul 14 23:46:20 localhost kernel: [ 8505.648070] 604505 pages non-shared
    Jul 14 23:46:20 localhost kernel: [ 8505.648107] sd 0:0:0:0: [sda] Stopping disk
    Jul 14 23:46:20 localhost kernel: [ 8505.731612] HDA Intel 0000:00:1b.0: PCI INT A disabled
    Jul 14 23:46:20 localhost kernel: [ 8505.893374] [fglrx] Suspending fglrx in kernel completed.
    Jul 14 23:46:20 localhost kernel: [ 8505.893377] [fglrx] Power down the ASIC .
    Jul 14 23:46:20 localhost kernel: [ 8506.356479] PM: suspend of devices complete after 843.272 msecs
    Jul 14 23:46:20 localhost kernel: [ 8506.409696] PM: late suspend of devices complete after 53.343 msecs
    Jul 14 23:46:20 localhost kernel: [ 8506.409993] ACPI: Preparing to enter system sleep state S3
    Jul 14 23:46:20 localhost kernel: [ 8506.526263] PM: Saving platform NVS memory
    Jul 14 23:46:20 localhost kernel: [ 8506.528060] Disabling non-boot CPUs ...
    Jul 14 23:46:20 localhost kernel: [ 8506.672249] CPU 1 is now offline
    Jul 14 23:46:20 localhost kernel: [ 8506.805254] CPU 2 is now offline
    Jul 14 23:46:20 localhost kernel: [ 8506.931586] CPU 3 is now offline
    Jul 14 23:46:20 localhost kernel: [ 8506.931924] Extended CMOS year: 2000
    Jul 14 23:46:20 localhost kernel: [ 8506.932121] ACPI: Low-level resume complete
    Jul 14 23:46:20 localhost kernel: [ 8506.932167] PM: Restoring platform NVS memory
    Jul 14 23:46:20 localhost kernel: [ 8506.932608] Extended CMOS year: 2000
    Jul 14 23:46:20 localhost kernel: [ 8506.932626] Enabling non-boot CPUs ...
    Jul 14 23:46:20 localhost kernel: [ 8506.939427] Booting Node 0 Processor 1 APIC 0x4
    Jul 14 23:46:20 localhost kernel: [ 8506.939430] smpboot cpu 1: start_ip = 97000
    Jul 14 23:46:20 localhost kernel: [ 8507.055234] Switched to NOHz mode on CPU #1
    Jul 14 23:46:20 localhost kernel: [ 8507.095325] NMI watchdog enabled, takes one hw-pmu counter.
    Jul 14 23:46:20 localhost kernel: [ 8507.095442] CPU1 is up
    Jul 14 23:46:20 localhost kernel: [ 8507.095504] Booting Node 0 Processor 2 APIC 0x1
    Jul 14 23:46:20 localhost kernel: [ 8507.095505] smpboot cpu 2: start_ip = 97000
    Jul 14 23:46:20 localhost kernel: [ 8507.211565] Switched to NOHz mode on CPU #2
    Jul 14 23:46:20 localhost kernel: [ 8507.251738] NMI watchdog enabled, takes one hw-pmu counter.
    Jul 14 23:46:20 localhost kernel: [ 8507.251873] CPU2 is up
    Jul 14 23:46:20 localhost kernel: [ 8507.251962] Booting Node 0 Processor 3 APIC 0x5
    Jul 14 23:46:20 localhost kernel: [ 8507.251964] smpboot cpu 3: start_ip = 97000
    Jul 14 23:46:20 localhost kernel: [ 8507.367843] Switched to NOHz mode on CPU #3
    Jul 14 23:46:20 localhost kernel: [ 8507.408173] NMI watchdog enabled, takes one hw-pmu counter.
    Jul 14 23:46:20 localhost kernel: [ 8507.408519] CPU3 is up
    Jul 14 23:46:20 localhost kernel: [ 8507.410477] ACPI: Waking up from system sleep state S3
    Jul 14 23:46:20 localhost kernel: [ 8507.484393] power_supply BAT0: parent PNP0C0A:00 should not be sleeping
    Jul 14 23:46:20 localhost kernel: [ 8507.597538] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x80100, writing 0x8010b)
    Jul 14 23:46:20 localhost kernel: [ 8507.597543] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x2020, writing 0x20002020)
    Jul 14 23:46:20 localhost kernel: [ 8507.597547] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
    Jul 14 23:46:20 localhost kernel: [ 8507.597550] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
    Jul 14 23:46:20 localhost kernel: [ 8507.597595] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Jul 14 23:46:20 localhost kernel: [ 8507.597608] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0606000)
    Jul 14 23:46:20 localhost kernel: [ 8507.597613] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Jul 14 23:46:20 localhost kernel: [ 8507.597635] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
    Jul 14 23:46:20 localhost kernel: [ 8507.597646] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xdc000004, writing 0xf0600004)
    Jul 14 23:46:20 localhost kernel: [ 8507.597650] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
    Jul 14 23:46:20 localhost kernel: [ 8507.597654] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102)
    Jul 14 23:46:20 localhost kernel: [ 8507.597673] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
    Jul 14 23:46:20 localhost kernel: [ 8507.597680] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f001)
    Jul 14 23:46:20 localhost kernel: [ 8507.597683] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
    Jul 14 23:46:20 localhost kernel: [ 8507.597687] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
    Jul 14 23:46:20 localhost kernel: [ 8507.597690] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x40300)
    Jul 14 23:46:20 localhost kernel: [ 8507.597694] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
    Jul 14 23:46:20 localhost kernel: [ 8507.597698] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
    Jul 14 23:46:20 localhost kernel: [ 8507.597721] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020b)
    Jul 14 23:46:20 localhost kernel: [ 8507.597728] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc011c001)
    Jul 14 23:46:20 localhost kernel: [ 8507.597731] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
    Jul 14 23:46:20 localhost kernel: [ 8507.597734] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040)
    Jul 14 23:46:20 localhost kernel: [ 8507.597737] pcieport 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0x50500)
    Jul 14 23:46:20 localhost kernel: [ 8507.597742] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
    Jul 14 23:46:20 localhost kernel: [ 8507.597746] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
    Jul 14 23:46:20 localhost kernel: [ 8507.597768] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
    Jul 14 23:46:20 localhost kernel: [ 8507.597781] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0607000)
    Jul 14 23:46:20 localhost kernel: [ 8507.597786] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
    Jul 14 23:46:20 localhost kernel: [ 8507.597803] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
    Jul 14 23:46:20 localhost kernel: [ 8507.597810] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
    Jul 14 23:46:20 localhost kernel: [ 8507.597813] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
    Jul 14 23:46:20 localhost kernel: [ 8507.597816] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
    Jul 14 23:46:20 localhost kernel: [ 8507.597823] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
    Jul 14 23:46:20 localhost kernel: [ 8507.597868] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x205)
    Jul 14 23:46:20 localhost kernel: [ 8507.597880] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
    Jul 14 23:46:20 localhost kernel: [ 8507.597921] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30a)
    Jul 14 23:46:20 localhost kernel: [ 8507.597936] pci 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
    Jul 14 23:46:20 localhost kernel: [ 8507.597958] fglrx_pci 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
    Jul 14 23:46:20 localhost kernel: [ 8507.597967] fglrx_pci 0000:02:00.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
    Jul 14 23:46:20 localhost kernel: [ 8507.597971] fglrx_pci 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xcfee0004)
    Jul 14 23:46:20 localhost kernel: [ 8507.597975] fglrx_pci 0000:02:00.0: restoring config space at offset 0x4 (was 0xc, writing 0xd000000c)
    Jul 14 23:46:20 localhost kernel: [ 8507.597978] fglrx_pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
    Jul 14 23:46:20 localhost kernel: [ 8507.597982] fglrx_pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100503)
    Jul 14 23:46:20 localhost kernel: [ 8507.598013] HDA Intel 0000:02:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a)
    Jul 14 23:46:20 localhost kernel: [ 8507.598024] HDA Intel 0000:02:00.1: restoring config space at offset 0x4 (was 0x4, writing 0xcfedc004)
    Jul 14 23:46:20 localhost kernel: [ 8507.598028] HDA Intel 0000:02:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
    Jul 14 23:46:20 localhost kernel: [ 8507.598032] HDA Intel 0000:02:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100103)
    Jul 14 23:46:20 localhost kernel: [ 8507.598116] tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
    Jul 14 23:46:20 localhost kernel: [ 8507.598121] tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
    Jul 14 23:46:20 localhost kernel: [ 8507.598178] ath9k 0000:05:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
    Jul 14 23:46:20 localhost kernel: [ 8507.598196] ath9k 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0300004)
    Jul 14 23:46:20 localhost kernel: [ 8507.598200] ath9k 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
    Jul 14 23:46:20 localhost kernel: [ 8507.598205] ath9k 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
    Jul 14 23:46:20 localhost kernel: [ 8507.598413] PM: early resume of devices complete after 0.957 msecs
    Jul 14 23:46:20 localhost kernel: [ 8507.598692] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Jul 14 23:46:20 localhost kernel: [ 8507.598700] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    Jul 14 23:46:20 localhost kernel: [ 8507.598705] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.598708] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Jul 14 23:46:20 localhost kernel: [ 8507.598711] HDA Intel 0000:00:1b.0: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.598715] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.598746] pci 0000:00:1e.0: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.598753] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    Jul 14 23:46:20 localhost kernel: [ 8507.598765] [fglrx] Kernel supports PAT but it has been disabled
    Jul 14 23:46:20 localhost kernel: [ 8507.598766] [fglrx] Using driver built-in PAT support instead
    Jul 14 23:46:20 localhost kernel: [ 8507.598768] ahci 0000:00:1f.2: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.599319] tg3 0000:03:00.0: wake-up capability disabled by ACPI
    Jul 14 23:46:20 localhost kernel: [ 8507.599360] tg3 0000:03:00.0: PME# disabled
    Jul 14 23:46:20 localhost kernel: [ 8507.599505] HDA Intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Jul 14 23:46:20 localhost kernel: [ 8507.599515] HDA Intel 0000:02:00.1: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.599554] HDA Intel 0000:02:00.1: irq 43 for MSI/MSI-X
    Jul 14 23:46:20 localhost kernel: [ 8507.599630] sd 0:0:0:0: [sda] Starting disk
    Jul 14 23:46:20 localhost kernel: [ 8507.599912] fglrx_pci 0000:02:00.0: setting latency timer to 64
    Jul 14 23:46:20 localhost kernel: [ 8507.605625] [fglrx] Power up the ASIC
    Jul 14 23:46:20 localhost kernel: [ 8507.605752] [fglrx] Preparing resume fglrx in kernel.
    Jul 14 23:46:20 localhost kernel: [ 8507.673839] [fglrx] Resuming fglrx in kernel completed.
    Jul 14 23:46:20 localhost kernel: [ 8507.674036] [fglrx] IRQ 44 Enabled
    Jul 14 23:46:20 localhost kernel: [ 8507.850159] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
    Jul 14 23:46:20 localhost kernel: [ 8507.916491] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jul 14 23:46:20 localhost kernel: [ 8507.919985] ata5.00: configured for UDMA/100
    Jul 14 23:46:20 localhost kernel: [ 8510.054456] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jul 14 23:46:20 localhost kernel: [ 8510.258470] ata1.00: configured for UDMA/133
    Jul 14 23:46:20 localhost kernel: [ 8510.336104] PM: resume of devices complete after 2744.342 msecs
    Jul 14 23:46:20 localhost kernel: [ 8510.336358] PM: Finishing wakeup.
    Jul 14 23:46:20 localhost kernel: [ 8510.336359] Restarting tasks ... done.
    Jul 14 23:46:20 localhost kernel: [ 8510.344265] video LNXVIDEO:00: Restoring backlight state
    Jul 14 23:46:21 localhost kernel: [ 8511.289064] tg3 0000:03:00.0: eth0: Link is down
    Jul 14 23:46:23 localhost kernel: [ 8513.177532] EXT4-fs (sda5): re-mounted. Opts: commit=0
    Jul 14 23:46:24 localhost kernel: [ 8513.797702] EXT4-fs (sda6): re-mounted. Opts: commit=0
    Jul 14 23:46:24 localhost kernel: [ 8514.034086] tg3 0000:03:00.0: PME# enabled
    Jul 14 23:46:24 localhost kernel: [ 8514.034101] tg3 0000:03:00.0: wake-up capability enabled by ACPI
    Jul 14 23:46:24 localhost kernel: [ 8514.057819] tg3 0000:03:00.0: irq 45 for MSI/MSI-X
    Jul 14 23:46:24 localhost kernel: [ 8514.291538] tg3 0000:03:00.0: eth0: Link is down
    Jul 14 23:46:26 localhost kernel: [ 8516.531715] wlan0: authenticate with 00:1b:11:a3:7b:24 (try 1)
    Jul 14 23:46:26 localhost kernel: [ 8516.533596] wlan0: authenticated
    Jul 14 23:46:26 localhost kernel: [ 8516.533615] wlan0: associate with 00:1b:11:a3:7b:24 (try 1)
    Jul 14 23:46:26 localhost kernel: [ 8516.536019] wlan0: RX AssocResp from 00:1b:11:a3:7b:24 (capab=0x431 status=0 aid=3)
    Jul 14 23:46:26 localhost kernel: [ 8516.536021] wlan0: associated
    Jul 14 23:49:21 localhost kernel: [ 8690.305910] [fglrx] ASIC hang happened
    Jul 14 23:49:21 localhost kernel: [ 8690.305915] Pid: 820, comm: X Tainted: P 2.6.39-ARCH #1
    Jul 14 23:49:21 localhost kernel: [ 8690.305917] Call Trace:
    Jul 14 23:49:21 localhost kernel: [ 8690.305955] [<ffffffffa0698d5e>] KCL_DEBUG_OsDump+0xe/0x10 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.305972] [<ffffffffa06a618c>] firegl_hardwareHangRecovery+0x1c/0x50 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306004] [<ffffffffa072d419>] ? _ZN4Asic9WaitUntil15ResetASICIfHungEv+0x9/0x10 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306034] [<ffffffffa072d3cc>] ? _ZN4Asic9WaitUntil15WaitForCompleteEv+0x6c/0xb0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306050] [<ffffffffa0779d7f>] ? _ZN13BaseUVDEngineI18mmEngineRS780_UVD2E4idleEv+0x7f/0xc0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306081] [<ffffffffa072c55c>] ? _ZN15ExecutableUnits35flush_all_and_invalidate_HDP_cachesE12_QS_CP_RING_+0xbc/0xe0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306112] [<ffffffffa072c355>] ? _ZN15ExecutableUnits10CPRingIdleE15idle_WaitMethod12_QS_CP_RING_+0x105/0x1a0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306143] [<ffffffffa0736807>] ? _ZN11AsicCypress21initializeMicroEngineEv+0x147/0x160 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306158] [<ffffffffa077a026>] ? _ZN13BaseUVDEngineI18mmEngineRS780_UVD2E14SwitchEngineHWEN8mmEngine15MM_ENGINE_STATEE+0x26/0x1d0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306190] [<ffffffffa072733a>] ? _ZN18mmEnginesContainer13assertEnginesEb+0x5a/0xa0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306220] [<ffffffffa072be78>] ? _ZN15ExecutableUnits17assertPrimaryRingEb+0x1f8/0x210 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306251] [<ffffffffa073372a>] ? _ZN8AsicR6009assertPM4Eb+0x4a/0x70 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306270] [<ffffffffa06c3350>] ? firegl_cmmqs_disabledriver+0xf0/0xf0 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306299] [<ffffffffa07080aa>] ? CMMQS_ReinitializeHardware+0x6a/0x80 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306318] [<ffffffffa06c43e0>] ? firegl_cmmqs_Enable_QS+0x70/0x110 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306337] [<ffffffffa06c3370>] ? firegl_cmmqs_enableqs+0x20/0x90 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306349] [<ffffffffa0694256>] ? KCL_PosixSecurityCapCheck+0x26/0x30 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306365] [<ffffffffa06a1d98>] ? firegl_ioctl+0x1e8/0x250 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306369] [<ffffffff8118ae62>] ? fsnotify+0x1c2/0x2a0
    Jul 14 23:49:21 localhost kernel: [ 8690.306380] [<ffffffffa0692eae>] ? ip_firegl_unlocked_ioctl+0xe/0x20 [fglrx]
    Jul 14 23:49:21 localhost kernel: [ 8690.306385] [<ffffffff81163b6f>] ? do_vfs_ioctl+0x8f/0x500
    Jul 14 23:49:21 localhost kernel: [ 8690.306389] [<ffffffff81151f48>] ? vfs_write+0x148/0x180
    Jul 14 23:49:21 localhost kernel: [ 8690.306391] [<ffffffff81164071>] ? sys_ioctl+0x91/0xa0
    Jul 14 23:49:21 localhost kernel: [ 8690.306396] [<ffffffff813e8ec2>] ? system_call_fastpath+0x16/0x1b
    Jul 14 23:49:21 localhost kernel: [ 8690.306399] pubdev:0xffffffffa08da080, num of device:1 , name:fglrx, major 8, minor 86.
    Jul 14 23:49:21 localhost kernel: [ 8690.306402] device 0 : 0xffff88012c40c000 .
    Jul 14 23:49:21 localhost kernel: [ 8690.306403] Asic ID:0x68c1, revision:0x28, MMIOReg:0xffffc900117c0000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306405] FB phys addr: 0xd0000000, MC :0xf00000000, Total FB size :0x40000000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306407] gart table MC:0xf0f941000, Physical:0xdf941000, size:0x3be000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306410] mc_node :FB, total 1 zones
    Jul 14 23:49:21 localhost kernel: [ 8690.306411] MC start:0xf00000000, Physical:0xd0000000, size:0xfd00000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306414] Mapped heap -- Offset:0x0, size:0xf941000, reference count:120, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306416] Mapped heap -- Offset:0x0, size:0x1000000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306418] Mapped heap -- Offset:0xf941000, size:0x3bf000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306419] mc_node :INV_FB, total 1 zones
    Jul 14 23:49:21 localhost kernel: [ 8690.306421] MC start:0xf0fd00000, Physical:0xdfd00000, size:0x30300000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306423] Mapped heap -- Offset:0x302f4000, size:0xc000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306424] mc_node :GART_USWC, total 2 zones
    Jul 14 23:49:21 localhost kernel: [ 8690.306426] MC start:0x3ce90000, Physical:0x0, size:0x4ac00000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306428] Mapped heap -- Offset:0x5030000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306430] Mapped heap -- Offset:0x4830000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306432] Mapped heap -- Offset:0x4030000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306434] Mapped heap -- Offset:0x3830000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306436] Mapped heap -- Offset:0x3030000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306438] Mapped heap -- Offset:0x2830000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306440] Mapped heap -- Offset:0x2030000, size:0x800000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306442] Mapped heap -- Offset:0x30000, size:0x2000000, reference count:13, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306444] mc_node :GART_CACHEABLE, total 3 zones
    Jul 14 23:49:21 localhost kernel: [ 8690.306445] MC start:0x10400000, Physical:0x0, size:0x2ca90000.
    Jul 14 23:49:21 localhost kernel: [ 8690.306447] Mapped heap -- Offset:0x8100000, size:0x700000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306449] Mapped heap -- Offset:0x3f00000, size:0x600000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306451] Mapped heap -- Offset:0x5800000, size:0x700000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306453] Mapped heap -- Offset:0x5100000, size:0x700000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306455] Mapped heap -- Offset:0x7b00000, size:0x600000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306457] Mapped heap -- Offset:0x7500000, size:0x600000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306459] Mapped heap -- Offset:0x6f00000, size:0x600000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306461] Mapped heap -- Offset:0x6900000, size:0x600000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306463] Mapped heap -- Offset:0x6300000, size:0x600000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306465] Mapped heap -- Offset:0x4500000, size:0x600000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306467] Mapped heap -- Offset:0x4d00000, size:0x400000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306469] Mapped heap -- Offset:0x3c00000, size:0x300000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306471] Mapped heap -- Offset:0x3500000, size:0x700000, reference count:3, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306473] Mapped heap -- Offset:0x2e00000, size:0x700000, reference count:2, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306475] Mapped heap -- Offset:0x2700000, size:0x700000, reference count:3, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306477] Mapped heap -- Offset:0x2300000, size:0x400000, reference count:5, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306479] Mapped heap -- Offset:0x1f00000, size:0x400000, reference count:6, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306481] Mapped heap -- Offset:0x1b00000, size:0x400000, reference count:5, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306483] Mapped heap -- Offset:0x1700000, size:0x400000, reference count:3, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306485] Mapped heap -- Offset:0x1000000, size:0x700000, reference count:17, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306487] Mapped heap -- Offset:0x900000, size:0x700000, reference count:16, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306489] Mapped heap -- Offset:0x200000, size:0x700000, reference count:40, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306491] Mapped heap -- Offset:0x0, size:0x200000, reference count:16, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306494] Mapped heap -- Offset:0xef000, size:0x11000, reference count:1, mapping count:0,
    Jul 14 23:49:21 localhost kernel: [ 8690.306552] GRBM : 0x3828, SRBM : 0x200000c0 .
    Jul 14 23:49:21 localhost kernel: [ 8690.306555] CP_RB_BASE : 0x3cec00, CP_RB_RPTR : 0x20 , CP_RB_WPTR :0x20.
    Jul 14 23:49:21 localhost kernel: [ 8690.306558] CP_IB1_BUFSZ:0x0, CP_IB1_BASE_HI:0x0, CP_IB1_BASE_LO:0x0.
    Jul 14 23:49:21 localhost kernel: [ 8690.306560] last submit IB buffer -- MC :0x0. Can't found mapped physical page for this MC .
    Jul 14 23:49:21 localhost kernel: [ 8690.306561] Dump the trace queue.
    Jul 14 23:49:21 localhost kernel: [ 8690.306562] End of dump
    Too bad we still don't know what's the cause... and why it seemed to be fine for so many days.
    Update: Well, this is weird and worse and perhaps related. The first time that this happened to me was a few days ago. After 15 minutes of inactivity, the screen turns off, to save power, well, I think this is the third time that, when returning to the laptop and attempting to turn the screen back on, it doesn't. It's like the same thing that happens when resuming from sleep mode, the black screen.
    I checked the logs, and in everything.log, these are the only entries from about that time:
    Jul 15 18:03:01 localhost crond[820]: FILE /var/spool/cron/root USER root PID 12357 job sys-hourly
    Jul 15 18:08:13 localhost kernel: [13935.470836] ath: txq: ffff88013002e8d0 axq_qnum: 2, mac80211_qnum: 2 axq_link: ffff88003782c160 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0 Attempting to restart tx logic.
    Jul 15 18:15:44 localhost -- MARK --
    Jul 15 18:32:02 localhost kernel: [15360.917332] SysRq : Keyboard mode set to system default
    Jul 15 18:32:50 localhost kernel: [15408.634134] SysRq : Terminate All Tasks
    Oh, this is so confusing, haha.
    Last edited by AnnS (2011-07-15 23:18:49)

  • Problems resuming from suspend on IBM Thinkpad R51

    I have been searching the forums and google for the past several days trying to fix this problem. When I enter suspend through fn+f4 or close the lid, I am unable to resume from suspend status, and must hard shutdown.
    I followed the instructions with my device IDs from this post, https://bbs.archlinux.org/viewtopic.php … 5#p1030435
    This link seems like it might work, but there aren't any of the /etc/sbin/* or /etc/bin/* files  :: http://www.thinkwiki.org/wiki/ACPI_acti … ed_for_R51
    $ lspci -ks 0:02
    00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
    Subsystem: IBM Device 0557
    Kernel driver in use: i915
    Kernel modules: i915
    00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
    Subsystem: IBM Device 0557
    Kernel modules: i915
    $ cat /etc/default/grub
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="i915.modeset=1"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    GRUB_HIDDEN_TIMEOUT=0
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    $ cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    Screen 2 "Screen2" RightOf "Screen1"
    Screen 3 "Screen3" RightOf "Screen2"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor3"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "vesa"
    BusID "PCI:0:2:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "Backlight" # <str>
    #Option "DRI" # <str>
    #Option "ColorKey" # <i>
    #Option "VideoKey" # <i>
    #Option "Tiling" # [<bool>]
    #Option "LinearFramebuffer" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    #Option "TripleBuffer" # [<bool>]
    #Option "XvPreferOverlay" # [<bool>]
    #Option "HotPlug" # [<bool>]
    #Option "RelaxedFencing" # [<bool>]
    #Option "XvMC" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "TearFree" # [<bool>]
    #Option "PerCrtcPixmaps" # [<bool>]
    #Option "FallbackDebug" # [<bool>]
    #Option "DebugFlushBatches" # [<bool>]
    #Option "DebugFlushCaches" # [<bool>]
    #Option "DebugWait" # [<bool>]
    #Option "BufferCache" # [<bool>]
    Identifier "Card1"
    Driver "intel"
    BusID "PCI:0:2:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "Backlight" # <str>
    #Option "DRI" # <str>
    #Option "ColorKey" # <i>
    #Option "VideoKey" # <i>
    #Option "Tiling" # [<bool>]
    #Option "LinearFramebuffer" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    #Option "TripleBuffer" # [<bool>]
    #Option "XvPreferOverlay" # [<bool>]
    #Option "HotPlug" # [<bool>]
    #Option "RelaxedFencing" # [<bool>]
    #Option "XvMC" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "TearFree" # [<bool>]
    #Option "PerCrtcPixmaps" # [<bool>]
    #Option "FallbackDebug" # [<bool>]
    #Option "DebugFlushBatches" # [<bool>]
    #Option "DebugFlushCaches" # [<bool>]
    #Option "DebugWait" # [<bool>]
    #Option "BufferCache" # [<bool>]
    Identifier "Card2"
    Driver "intel"
    BusID "PCI:0:2:1"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "Rotate" # <str>
    #Option "fbdev" # <str>
    #Option "debug" # [<bool>]
    Identifier "Card3"
    Driver "fbdev"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "Card2"
    Monitor "Monitor2"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "Card3"
    Monitor "Monitor3"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    $ cat /etc/X11/xorg.conf.d/20-intel.conf
    Section "Device
    Identifier "card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)"
    BusID "PCI:0:2:0"
    EndSection
    $ modinfo i915
    filename: /lib/modules/3.9.9-1-ARCH/kernel/drivers/gpu/drm/i915/i915.ko.gz
    license: GPL and additional rights
    description: Intel Graphics
    author: Tungsten Graphics, Inc.
    license: GPL and additional rights
    alias: pci:v00008086d00000155sv*sd*bc03sc*i*
    alias: pci:v00008086d00000157sv*sd*bc03sc*i*
    alias: pci:v00008086d00000F30sv*sd*bc03sc*i*
    alias: pci:v00008086d00000D2Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000D1Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000D0Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000D2Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000D1Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000D0Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000D26sv*sd*bc03sc*i*
    alias: pci:v00008086d00000D16sv*sd*bc03sc*i*
    alias: pci:v00008086d00000D06sv*sd*bc03sc*i*
    alias: pci:v00008086d00000D2Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000D1Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000D0Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000D22sv*sd*bc03sc*i*
    alias: pci:v00008086d00000D12sv*sd*bc03sc*i*
    alias: pci:v00008086d00000D02sv*sd*bc03sc*i*
    alias: pci:v00008086d00000A2Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000A1Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000A0Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000A2Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000A1Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000A0Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000A26sv*sd*bc03sc*i*
    alias: pci:v00008086d00000A16sv*sd*bc03sc*i*
    alias: pci:v00008086d00000A06sv*sd*bc03sc*i*
    alias: pci:v00008086d00000A2Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000A1Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000A0Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000A22sv*sd*bc03sc*i*
    alias: pci:v00008086d00000A12sv*sd*bc03sc*i*
    alias: pci:v00008086d00000A02sv*sd*bc03sc*i*
    alias: pci:v00008086d00000C2Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000C1Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000C0Esv*sd*bc03sc*i*
    alias: pci:v00008086d00000C2Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000C1Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000C0Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000C26sv*sd*bc03sc*i*
    alias: pci:v00008086d00000C16sv*sd*bc03sc*i*
    alias: pci:v00008086d00000C06sv*sd*bc03sc*i*
    alias: pci:v00008086d00000C2Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000C1Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000C0Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000C22sv*sd*bc03sc*i*
    alias: pci:v00008086d00000C12sv*sd*bc03sc*i*
    alias: pci:v00008086d00000C02sv*sd*bc03sc*i*
    alias: pci:v00008086d0000042Esv*sd*bc03sc*i*
    alias: pci:v00008086d0000041Esv*sd*bc03sc*i*
    alias: pci:v00008086d0000040Esv*sd*bc03sc*i*
    alias: pci:v00008086d0000042Bsv*sd*bc03sc*i*
    alias: pci:v00008086d0000041Bsv*sd*bc03sc*i*
    alias: pci:v00008086d0000040Bsv*sd*bc03sc*i*
    alias: pci:v00008086d00000426sv*sd*bc03sc*i*
    alias: pci:v00008086d00000416sv*sd*bc03sc*i*
    alias: pci:v00008086d00000406sv*sd*bc03sc*i*
    alias: pci:v00008086d0000042Asv*sd*bc03sc*i*
    alias: pci:v00008086d0000041Asv*sd*bc03sc*i*
    alias: pci:v00008086d0000040Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000422sv*sd*bc03sc*i*
    alias: pci:v00008086d00000412sv*sd*bc03sc*i*
    alias: pci:v00008086d00000402sv*sd*bc03sc*i*
    alias: pci:v00008086d0000016Asv*sd*bc03sc*i*
    alias: pci:v00008086d0000015Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000162sv*sd*bc03sc*i*
    alias: pci:v00008086d00000152sv*sd*bc03sc*i*
    alias: pci:v00008086d00000166sv*sd*bc03sc*i*
    alias: pci:v00008086d00000156sv*sd*bc03sc*i*
    alias: pci:v00008086d0000010Asv*sd*bc03sc*i*
    alias: pci:v00008086d00000126sv*sd*bc03sc*i*
    alias: pci:v00008086d00000116sv*sd*bc03sc*i*
    alias: pci:v00008086d00000106sv*sd*bc03sc*i*
    alias: pci:v00008086d00000122sv*sd*bc03sc*i*
    alias: pci:v00008086d00000112sv*sd*bc03sc*i*
    alias: pci:v00008086d00000102sv*sd*bc03sc*i*
    alias: pci:v00008086d00000046sv*sd*bc03sc*i*
    alias: pci:v00008086d00000042sv*sd*bc03sc*i*
    alias: pci:v00008086d0000A011sv*sd*bc03sc*i*
    alias: pci:v00008086d0000A001sv*sd*bc03sc*i*
    alias: pci:v00008086d00002E92sv*sd*bc03sc*i*
    alias: pci:v00008086d00002E42sv*sd*bc03sc*i*
    alias: pci:v00008086d00002E32sv*sd*bc03sc*i*
    alias: pci:v00008086d00002E22sv*sd*bc03sc*i*
    alias: pci:v00008086d00002E12sv*sd*bc03sc*i*
    alias: pci:v00008086d00002E02sv*sd*bc03sc*i*
    alias: pci:v00008086d00002A42sv*sd*bc03sc*i*
    alias: pci:v00008086d00002A12sv*sd*bc03sc*i*
    alias: pci:v00008086d00002A02sv*sd*bc03sc*i*
    alias: pci:v00008086d000029D2sv*sd*bc03sc*i*
    alias: pci:v00008086d000029C2sv*sd*bc03sc*i*
    alias: pci:v00008086d000029B2sv*sd*bc03sc*i*
    alias: pci:v00008086d000029A2sv*sd*bc03sc*i*
    alias: pci:v00008086d00002992sv*sd*bc03sc*i*
    alias: pci:v00008086d00002982sv*sd*bc03sc*i*
    alias: pci:v00008086d00002972sv*sd*bc03sc*i*
    alias: pci:v00008086d000027AEsv*sd*bc03sc*i*
    alias: pci:v00008086d000027A2sv*sd*bc03sc*i*
    alias: pci:v00008086d00002772sv*sd*bc03sc*i*
    alias: pci:v00008086d00002592sv*sd*bc03sc*i*
    alias: pci:v00008086d0000258Asv*sd*bc03sc*i*
    alias: pci:v00008086d00002582sv*sd*bc03sc*i*
    alias: pci:v00008086d00002572sv*sd*bc03sc*i*
    alias: pci:v00008086d0000358Esv*sd*bc03sc*i*
    alias: pci:v00008086d00003582sv*sd*bc03sc*i*
    alias: pci:v00008086d00002562sv*sd*bc03sc*i*
    alias: pci:v00008086d00003577sv*sd*bc03sc*i*
    depends: drm_kms_helper,drm,intel-gtt,i2c-core,video,button,i2c-algo-bit,intel-agp
    intree: Y
    vermagic: 3.9.9-1-ARCH SMP preempt mod_unload modversions 686
    parm: invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to [email protected], if your machine needs it. It will then be included in an upcoming module version. (int)
    parm: modeset:Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, 1=on, -1=force vga console preference [default]) (int)
    parm: fbpercrtc:int
    parm: panel_ignore_lid:Override lid status (0=autodetect, 1=autodetect disabled [default], -1=force lid closed, -2=force lid open) (int)
    parm: powersave:Enable powersavings, fbc, downclocking, etc. (default: true) (int)
    parm: semaphores:Use semaphores for inter-ring sync (default: -1 (use per-chip defaults)) (int)
    parm: i915_enable_rc6:Enable power-saving render C-state 6. Different stages can be selected via bitmask values (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. default: -1 (use per-chip default) (int)
    parm: i915_enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
    parm: lvds_downclock:Use panel (LVDS/eDP) downclocking for power savings (default: false) (int)
    parm: lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
    parm: lvds_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
    parm: vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
    parm: reset:Attempt GPU resets (default: true) (bool)
    parm: enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
    parm: i915_enable_ppgtt:Enable PPGTT (default: true) (int)
    parm: preliminary_hw_support:Enable preliminary hardware support. Enable Haswell and ValleyView Support. (default: false) (int)
    parm: disable_power_well:Disable the power well when possible (default: false) (int)
    $ zcat /proc/config.gz
    # Automatically generated file; DO NOT EDIT.
    # Linux/x86 3.9.9-1 Kernel Configuration
    # CONFIG_64BIT is not set
    CONFIG_X86_32=y
    CONFIG_X86=y
    CONFIG_INSTRUCTION_DECODER=y
    CONFIG_OUTPUT_FORMAT="elf32-i386"
    CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_HAVE_LATENCYTOP_SUPPORT=y
    CONFIG_MMU=y
    CONFIG_NEED_DMA_MAP_STATE=y
    CONFIG_NEED_SG_DMA_LENGTH=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_GENERIC_GPIO=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_ARCH_HAS_CPU_RELAX=y
    CONFIG_ARCH_HAS_DEFAULT_IDLE=y
    CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
    CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
    CONFIG_HAVE_SETUP_PER_CPU_AREA=y
    CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
    CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
    CONFIG_ARCH_HIBERNATION_POSSIBLE=y
    CONFIG_ARCH_SUSPEND_POSSIBLE=y
    # CONFIG_ZONE_DMA32 is not set
    # CONFIG_AUDIT_ARCH is not set
    CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
    CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
    CONFIG_HAVE_INTEL_TXT=y
    CONFIG_X86_32_SMP=y
    CONFIG_X86_HT=y
    CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
    CONFIG_ARCH_CPU_PROBE_RELEASE=y
    CONFIG_ARCH_SUPPORTS_UPROBES=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    CONFIG_IRQ_WORK=y
    CONFIG_BUILDTIME_EXTABLE_SORT=y
    # General setup
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_CROSS_COMPILE=""
    CONFIG_LOCALVERSION="-ARCH"
    CONFIG_LOCALVERSION_AUTO=y
    CONFIG_HAVE_KERNEL_GZIP=y
    CONFIG_HAVE_KERNEL_BZIP2=y
    CONFIG_HAVE_KERNEL_LZMA=y
    CONFIG_HAVE_KERNEL_XZ=y
    CONFIG_HAVE_KERNEL_LZO=y
    CONFIG_KERNEL_GZIP=y
    # CONFIG_KERNEL_BZIP2 is not set
    # CONFIG_KERNEL_LZMA is not set
    # CONFIG_KERNEL_XZ is not set
    # CONFIG_KERNEL_LZO is not set
    CONFIG_DEFAULT_HOSTNAME="(none)"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_POSIX_MQUEUE_SYSCTL=y
    CONFIG_FHANDLE=y
    CONFIG_AUDIT=y
    CONFIG_AUDITSYSCALL=y
    CONFIG_AUDIT_WATCH=y
    CONFIG_AUDIT_TREE=y
    CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
    CONFIG_HAVE_GENERIC_HARDIRQS=y
    # IRQ subsystem
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_IRQ_SHOW=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_IRQ_DOMAIN=y
    # CONFIG_IRQ_DOMAIN_DEBUG is not set
    CONFIG_IRQ_FORCED_THREADING=y
    CONFIG_SPARSE_IRQ=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_KTIME_SCALAR=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    # Timers subsystem
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    # CPU/Task time and stats accounting
    CONFIG_TICK_CPU_ACCOUNTING=y
    # CONFIG_IRQ_TIME_ACCOUNTING is not set
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    CONFIG_TASKSTATS=y
    CONFIG_TASK_DELAY_ACCT=y
    CONFIG_TASK_XACCT=y
    CONFIG_TASK_IO_ACCOUNTING=y
    # RCU Subsystem
    CONFIG_TREE_PREEMPT_RCU=y
    CONFIG_PREEMPT_RCU=y
    CONFIG_RCU_STALL_COMMON=y
    CONFIG_RCU_FANOUT=32
    CONFIG_RCU_FANOUT_LEAF=16
    # CONFIG_RCU_FANOUT_EXACT is not set
    CONFIG_RCU_FAST_NO_HZ=y
    # CONFIG_TREE_RCU_TRACE is not set
    # CONFIG_RCU_BOOST is not set
    CONFIG_RCU_NOCB_CPU=y
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=19
    CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
    CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
    CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
    CONFIG_CGROUPS=y
    # CONFIG_CGROUP_DEBUG is not set
    CONFIG_CGROUP_FREEZER=y
    CONFIG_CGROUP_DEVICE=y
    CONFIG_CPUSETS=y
    CONFIG_PROC_PID_CPUSET=y
    CONFIG_CGROUP_CPUACCT=y
    CONFIG_RESOURCE_COUNTERS=y
    CONFIG_MEMCG=y
    CONFIG_MEMCG_SWAP=y
    # CONFIG_MEMCG_SWAP_ENABLED is not set
    CONFIG_MEMCG_KMEM=y
    # CONFIG_CGROUP_HUGETLB is not set
    # CONFIG_CGROUP_PERF is not set
    CONFIG_CGROUP_SCHED=y
    CONFIG_FAIR_GROUP_SCHED=y
    CONFIG_CFS_BANDWIDTH=y
    CONFIG_RT_GROUP_SCHED=y
    CONFIG_BLK_CGROUP=y
    # CONFIG_DEBUG_BLK_CGROUP is not set
    # CONFIG_CHECKPOINT_RESTORE is not set
    CONFIG_NAMESPACES=y
    CONFIG_UTS_NS=y
    CONFIG_IPC_NS=y
    CONFIG_PID_NS=y
    CONFIG_NET_NS=y
    CONFIG_SCHED_AUTOGROUP=y
    CONFIG_MM_OWNER=y
    # CONFIG_SYSFS_DEPRECATED is not set
    CONFIG_RELAY=y
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_RD_GZIP=y
    CONFIG_RD_BZIP2=y
    CONFIG_RD_LZMA=y
    CONFIG_RD_XZ=y
    CONFIG_RD_LZO=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    CONFIG_ANON_INODES=y
    # CONFIG_EXPERT is not set
    CONFIG_HAVE_UID16=y
    CONFIG_UID16=y
    # CONFIG_SYSCTL_SYSCALL is not set
    CONFIG_SYSCTL_EXCEPTION_TRACE=y
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_PCSPKR_PLATFORM=y
    CONFIG_HAVE_PCSPKR_PLATFORM=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_AIO=y
    # CONFIG_EMBEDDED is not set
    CONFIG_HAVE_PERF_EVENTS=y
    # Kernel Performance Events And Counters
    CONFIG_PERF_EVENTS=y
    # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_PCI_QUIRKS=y
    CONFIG_SLUB_DEBUG=y
    # CONFIG_COMPAT_BRK is not set
    # CONFIG_SLAB is not set
    CONFIG_SLUB=y
    CONFIG_PROFILING=y
    CONFIG_TRACEPOINTS=y
    CONFIG_OPROFILE=m
    # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
    CONFIG_HAVE_OPROFILE=y
    CONFIG_OPROFILE_NMI_TIMER=y
    CONFIG_KPROBES=y
    CONFIG_JUMP_LABEL=y
    CONFIG_KPROBES_ON_FTRACE=y
    CONFIG_UPROBES=y
    # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
    CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
    CONFIG_ARCH_USE_BUILTIN_BSWAP=y
    CONFIG_KRETPROBES=y
    CONFIG_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_IOREMAP_PROT=y
    CONFIG_HAVE_KPROBES=y
    CONFIG_HAVE_KRETPROBES=y
    CONFIG_HAVE_OPTPROBES=y
    CONFIG_HAVE_KPROBES_ON_FTRACE=y
    CONFIG_HAVE_ARCH_TRACEHOOK=y
    CONFIG_HAVE_DMA_ATTRS=y
    CONFIG_HAVE_DMA_CONTIGUOUS=y
    CONFIG_USE_GENERIC_SMP_HELPERS=y
    CONFIG_GENERIC_SMP_IDLE_THREAD=y
    CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
    CONFIG_HAVE_DMA_API_DEBUG=y
    CONFIG_HAVE_HW_BREAKPOINT=y
    CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
    CONFIG_HAVE_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_PERF_EVENTS_NMI=y
    CONFIG_HAVE_PERF_REGS=y
    CONFIG_HAVE_PERF_USER_STACK_DUMP=y
    CONFIG_HAVE_ARCH_JUMP_LABEL=y
    CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
    CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
    CONFIG_HAVE_CMPXCHG_LOCAL=y
    CONFIG_HAVE_CMPXCHG_DOUBLE=y
    CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
    CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
    CONFIG_SECCOMP_FILTER=y
    CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
    CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
    CONFIG_MODULES_USE_ELF_REL=y
    CONFIG_CLONE_BACKWARDS=y
    CONFIG_OLD_SIGSUSPEND3=y
    CONFIG_OLD_SIGACTION=y
    # GCOV-based kernel profiling
    # CONFIG_GCOV_KERNEL is not set
    CONFIG_HAVE_GENERIC_DMA_COHERENT=y
    CONFIG_SLABINFO=y
    CONFIG_RT_MUTEXES=y
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_FORCE_LOAD=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_MODVERSIONS=y
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    # CONFIG_MODULE_SIG is not set
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    CONFIG_LBDAF=y
    CONFIG_BLK_DEV_BSG=y
    CONFIG_BLK_DEV_BSGLIB=y
    # CONFIG_BLK_DEV_INTEGRITY is not set
    CONFIG_BLK_DEV_THROTTLING=y
    # Partition Types
    CONFIG_PARTITION_ADVANCED=y
    # CONFIG_ACORN_PARTITION is not set
    # CONFIG_OSF_PARTITION is not set
    # CONFIG_AMIGA_PARTITION is not set
    # CONFIG_ATARI_PARTITION is not set
    CONFIG_MAC_PARTITION=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_BSD_DISKLABEL=y
    CONFIG_MINIX_SUBPARTITION=y
    CONFIG_SOLARIS_X86_PARTITION=y
    # CONFIG_UNIXWARE_DISKLABEL is not set
    CONFIG_LDM_PARTITION=y
    # CONFIG_LDM_DEBUG is not set
    # CONFIG_SGI_PARTITION is not set
    # CONFIG_ULTRIX_PARTITION is not set
    # CONFIG_SUN_PARTITION is not set
    CONFIG_KARMA_PARTITION=y
    CONFIG_EFI_PARTITION=y
    # CONFIG_SYSV68_PARTITION is not set
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_CFQ_GROUP_IOSCHED=y
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    CONFIG_PREEMPT_NOTIFIERS=y
    CONFIG_PADATA=y
    CONFIG_ASN1=m
    CONFIG_UNINLINE_SPIN_UNLOCK=y
    CONFIG_FREEZER=y
    # Processor type and features
    CONFIG_ZONE_DMA=y
    CONFIG_SMP=y
    CONFIG_X86_MPPARSE=y
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_EXTENDED_PLATFORM is not set
    # CONFIG_X86_GOLDFISH is not set
    # CONFIG_X86_INTEL_LPSS is not set
    CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
    CONFIG_X86_32_IRIS=m
    CONFIG_SCHED_OMIT_FRAME_POINTER=y
    CONFIG_PARAVIRT_GUEST=y
    CONFIG_PARAVIRT_TIME_ACCOUNTING=y
    # CONFIG_XEN_PRIVILEGED_GUEST is not set
    CONFIG_KVM_GUEST=y
    CONFIG_LGUEST_GUEST=y
    CONFIG_PARAVIRT=y
    # CONFIG_PARAVIRT_SPINLOCKS is not set
    CONFIG_PARAVIRT_CLOCK=y
    # CONFIG_PARAVIRT_DEBUG is not set
    CONFIG_NO_BOOTMEM=y
    # CONFIG_MEMTEST is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    CONFIG_M686=y
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUMM is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    # CONFIG_MK7 is not set
    # CONFIG_MK8 is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MEFFICEON is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MELAN is not set
    # CONFIG_MGEODEGX1 is not set
    # CONFIG_MGEODE_LX is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_MVIAC7 is not set
    # CONFIG_MCORE2 is not set
    # CONFIG_MATOM is not set
    CONFIG_X86_GENERIC=y
    CONFIG_X86_INTERNODE_CACHE_SHIFT=6
    CONFIG_X86_L1_CACHE_SHIFT=6
    # CONFIG_X86_PPRO_FENCE is not set
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_TSC=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_CMOV=y
    CONFIG_X86_MINIMUM_CPU_FAMILY=5
    CONFIG_X86_DEBUGCTLMSR=y
    CONFIG_CPU_SUP_INTEL=y
    CONFIG_CPU_SUP_AMD=y
    CONFIG_CPU_SUP_CENTAUR=y
    CONFIG_CPU_SUP_TRANSMETA_32=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_DMI=y
    CONFIG_NR_CPUS=8
    CONFIG_SCHED_SMT=y
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    # CONFIG_PREEMPT_VOLUNTARY is not set
    CONFIG_PREEMPT=y
    CONFIG_PREEMPT_COUNT=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_INTEL=y
    CONFIG_X86_MCE_AMD=y
    # CONFIG_X86_ANCIENT_MCE is not set
    CONFIG_X86_MCE_THRESHOLD=y
    # CONFIG_X86_MCE_INJECT is not set
    CONFIG_X86_THERMAL_VECTOR=y
    CONFIG_VM86=y
    CONFIG_TOSHIBA=m
    CONFIG_I8K=m
    CONFIG_X86_REBOOTFIXUPS=y
    CONFIG_MICROCODE=m
    CONFIG_MICROCODE_INTEL=y
    CONFIG_MICROCODE_AMD=y
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_MICROCODE_INTEL_LIB=y
    CONFIG_MICROCODE_INTEL_EARLY=y
    CONFIG_MICROCODE_EARLY=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    # CONFIG_NOHIGHMEM is not set
    CONFIG_HIGHMEM4G=y
    # CONFIG_HIGHMEM64G is not set
    CONFIG_PAGE_OFFSET=0xC0000000
    CONFIG_HIGHMEM=y
    CONFIG_ARCH_FLATMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ILLEGAL_POINTER_VALUE=0
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_FLATMEM_MANUAL=y
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_FLATMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_SPARSEMEM_STATIC=y
    CONFIG_HAVE_MEMBLOCK=y
    CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
    CONFIG_ARCH_DISCARD_MEMBLOCK=y
    CONFIG_MEMORY_ISOLATION=y
    # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
    CONFIG_PAGEFLAGS_EXTENDED=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_BALLOON_COMPACTION=y
    CONFIG_COMPACTION=y
    CONFIG_MIGRATION=y
    # CONFIG_PHYS_ADDR_T_64BIT is not set
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_MMU_NOTIFIER=y
    CONFIG_KSM=y
    CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
    CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
    CONFIG_MEMORY_FAILURE=y
    CONFIG_HWPOISON_INJECT=m
    CONFIG_TRANSPARENT_HUGEPAGE=y
    CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
    # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
    CONFIG_CROSS_MEMORY_ATTACH=y
    CONFIG_CLEANCACHE=y
    CONFIG_FRONTSWAP=y
    # CONFIG_HIGHPTE is not set
    CONFIG_X86_CHECK_BIOS_CORRUPTION=y
    CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
    CONFIG_X86_RESERVE_LOW=64
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    CONFIG_X86_PAT=y
    CONFIG_ARCH_USES_PG_UNCACHED=y
    CONFIG_ARCH_RANDOM=y
    CONFIG_X86_SMAP=y
    CONFIG_EFI=y
    CONFIG_EFI_STUB=y
    CONFIG_SECCOMP=y
    CONFIG_CC_STACKPROTECTOR=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    CONFIG_HZ_300=y
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=300
    CONFIG_SCHED_HRTICK=y
    CONFIG_KEXEC=y
    # CONFIG_CRASH_DUMP is not set
    # CONFIG_KEXEC_JUMP is not set
    CONFIG_PHYSICAL_START=0x1000000
    CONFIG_RELOCATABLE=y
    CONFIG_X86_NEED_RELOCS=y
    CONFIG_PHYSICAL_ALIGN=0x100000
    CONFIG_HOTPLUG_CPU=y
    # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
    # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
    # CONFIG_COMPAT_VDSO is not set
    # CONFIG_CMDLINE_BOOL is not set
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    # Power management and ACPI options
    CONFIG_SUSPEND=y
    CONFIG_SUSPEND_FREEZER=y
    CONFIG_HIBERNATE_CALLBACKS=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_PM_SLEEP=y
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_AUTOSLEEP=y
    CONFIG_PM_WAKELOCKS=y
    CONFIG_PM_WAKELOCKS_LIMIT=100
    CONFIG_PM_WAKELOCKS_GC=y
    CONFIG_PM_RUNTIME=y
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    CONFIG_PM_ADVANCED_DEBUG=y
    # CONFIG_PM_TEST_SUSPEND is not set
    CONFIG_PM_SLEEP_DEBUG=y
    CONFIG_PM_TRACE=y
    CONFIG_PM_TRACE_RTC=y
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    # CONFIG_ACPI_PROCFS is not set
    # CONFIG_ACPI_PROCFS_POWER is not set
    CONFIG_ACPI_EC_DEBUGFS=m
    # CONFIG_ACPI_PROC_EVENT is not set
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=m
    CONFIG_ACPI_DOCK=y
    CONFIG_ACPI_I2C=m
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_IPMI=m
    CONFIG_ACPI_HOTPLUG_CPU=y
    CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
    CONFIG_ACPI_THERMAL=m
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_PCI_SLOT=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=y
    CONFIG_ACPI_SBS=m
    CONFIG_ACPI_HED=y
    CONFIG_ACPI_CUSTOM_METHOD=m
    CONFIG_ACPI_BGRT=y
    CONFIG_ACPI_APEI=y
    CONFIG_ACPI_APEI_GHES=y
    CONFIG_ACPI_APEI_PCIEAER=y
    CONFIG_ACPI_APEI_MEMORY_FAILURE=y
    CONFIG_ACPI_APEI_EINJ=m
    CONFIG_ACPI_APEI_ERST_DEBUG=m
    CONFIG_SFI=y
    CONFIG_X86_APM_BOOT=y
    CONFIG_APM=y
    # CONFIG_APM_IGNORE_USER_SUSPEND is not set
    CONFIG_APM_DO_ENABLE=y
    # CONFIG_APM_CPU_IDLE is not set
    # CONFIG_APM_DISPLAY_BLANK is not set
    # CONFIG_APM_ALLOW_INTS is not set
    # CPU Frequency scaling
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=y
    CONFIG_CPU_FREQ_GOV_COMMON=y
    CONFIG_CPU_FREQ_STAT=m
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
    # x86 CPU frequency scaling drivers
    CONFIG_X86_INTEL_PSTATE=y
    CONFIG_X86_PCC_CPUFREQ=m
    CONFIG_X86_ACPI_CPUFREQ=m
    CONFIG_X86_ACPI_CPUFREQ_CPB=y
    CONFIG_X86_POWERNOW_K6=m
    CONFIG_X86_POWERNOW_K7=m
    CONFIG_X86_POWERNOW_K7_ACPI=y
    CONFIG_X86_POWERNOW_K8=m
    CONFIG_X86_GX_SUSPMOD=m
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    CONFIG_X86_SPEEDSTEP_ICH=m
    CONFIG_X86_SPEEDSTEP_SMI=m
    CONFIG_X86_P4_CLOCKMOD=m
    CONFIG_X86_CPUFREQ_NFORCE2=m
    CONFIG_X86_LONGRUN=m
    CONFIG_X86_LONGHAUL=m
    CONFIG_X86_E_POWERSAVER=m
    # shared options
    CONFIG_X86_SPEEDSTEP_LIB=m
    CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
    CONFIG_CPU_IDLE=y
    # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y
    # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
    CONFIG_INTEL_IDLE=y
    # Bus options (PCI etc.)
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GOMMCONFIG is not set
    # CONFIG_PCI_GODIRECT is not set
    # CONFIG_PCI_GOOLPC is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_OLPC=y
    CONFIG_PCI_DOMAINS=y
    CONFIG_PCIEPORTBUS=y
    CONFIG_HOTPLUG_PCI_PCIE=m
    CONFIG_PCIEAER=y
    # CONFIG_PCIE_ECRC is not set
    # CONFIG_PCIEAER_INJECT is not set
    CONFIG_PCIEASPM=y
    # CONFIG_PCIEASPM_DEBUG is not set
    CONFIG_PCIEASPM_DEFAULT=y
    # CONFIG_PCIEASPM_POWERSAVE is not set
    # CONFIG_PCIEASPM_PERFORMANCE is not set
    CONFIG_PCIE_PME=y
    CONFIG_ARCH_SUPPORTS_MSI=y
    CONFIG_PCI_MSI=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_PCI_REALLOC_ENABLE_AUTO=y
    CONFIG_PCI_STUB=m
    CONFIG_HT_IRQ=y
    CONFIG_PCI_ATS=y
    CONFIG_PCI_IOV=y
    CONFIG_PCI_PRI=y
    CONFIG_PCI_PASID=y
    CONFIG_PCI_IOAPIC=y
    CONFIG_PCI_LABEL=y
    CONFIG_ISA_DMA_API=y
    CONFIG_ISA=y
    # CONFIG_EISA is not set
    # CONFIG_SCx200 is not set
    CONFIG_OLPC=y
    CONFIG_OLPC_XO1_PM=y
    CONFIG_OLPC_XO1_RTC=y
    CONFIG_OLPC_XO1_SCI=y
    CONFIG_OLPC_XO15_SCI=y
    # CONFIG_ALIX is not set
    # CONFIG_NET5501 is not set
    # CONFIG_GEOS is not set
    CONFIG_AMD_NB=y
    CONFIG_PCCARD=m
    CONFIG_PCMCIA=m
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_CARDBUS=y
    # PC-card bridges
    CONFIG_YENTA=m
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    CONFIG_PD6729=m
    CONFIG_I82092=m
    CONFIG_I82365=m
    CONFIG_TCIC=m
    CONFIG_PCMCIA_PROBE=y
    CONFIG_PCCARD_NONSTATIC=y
    CONFIG_HOTPLUG_PCI=m
    CONFIG_HOTPLUG_PCI_COMPAQ=m
    # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
    CONFIG_HOTPLUG_PCI_IBM=m
    CONFIG_HOTPLUG_PCI_ACPI=m
    CONFIG_HOTPLUG_PCI_ACPI_IBM=m
    CONFIG_HOTPLUG_PCI_CPCI=y
    CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
    CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
    CONFIG_HOTPLUG_PCI_SHPC=m
    CONFIG_RAPIDIO=y
    CONFIG_RAPIDIO_TSI721=y
    CONFIG_RAPIDIO_DISC_TIMEOUT=30
    # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
    CONFIG_RAPIDIO_DMA_ENGINE=y
    CONFIG_RAPIDIO_DEBUG=y
    CONFIG_RAPIDIO_TSI57X=y
    CONFIG_RAPIDIO_CPS_XX=y
    CONFIG_RAPIDIO_TSI568=y
    CONFIG_RAPIDIO_CPS_GEN2=y
    CONFIG_RAPIDIO_TSI500=y
    # Executable file formats / Emulations
    CONFIG_BINFMT_ELF=y
    CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
    # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
    CONFIG_HAVE_AOUT=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_MISC=y
    CONFIG_COREDUMP=y
    CONFIG_HAVE_ATOMIC_IOMAP=y
    CONFIG_HAVE_TEXT_POKE_SMP=y
    CONFIG_NET=y
    # Networking options
    CONFIG_PACKET=y
    CONFIG_PACKET_DIAG=m
    CONFIG_UNIX=y
    CONFIG_UNIX_DIAG=m
    CONFIG_XFRM=y
    CONFIG_XFRM_ALGO=m
    CONFIG_XFRM_USER=m
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    # CONFIG_XFRM_STATISTICS is not set
    CONFIG_XFRM_IPCOMP=m
    CONFIG_NET_KEY=m
    # CONFIG_NET_KEY_MIGRATE is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_IP_FIB_TRIE_STATS=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_ROUTE_CLASSID=y
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE_DEMUX=m
    CONFIG_NET_IPGRE=m
    # CONFIG_NET_IPGRE_BROADCAST is not set
    CONFIG_IP_MROUTE=y
    # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    CONFIG_ARPD=y
    CONFIG_SYN_COOKIES=y
    CONFIG_NET_IPVTI=m
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=m
    CONFIG_INET_XFRM_MODE_TRANSPORT=m
    CONFIG_INET_XFRM_MODE_TUNNEL=m
    CONFIG_INET_XFRM_MODE_BEET=m
    CONFIG_INET_LRO=y
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    CONFIG_INET_UDP_DIAG=m
    CONFIG_TCP_CONG_ADVANCED=y
    CONFIG_TCP_CONG_BIC=m
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_TCP_CONG_WESTWOOD=m
    CONFIG_TCP_CONG_HTCP=m
    CONFIG_TCP_CONG_HSTCP=m
    CONFIG_TCP_CONG_HYBLA=m
    CONFIG_TCP_CONG_VEGAS=m
    CONFIG_TCP_CONG_SCALABLE=m
    CONFIG_TCP_CONG_LP=m
    CONFIG_TCP_CONG_VENO=m
    CONFIG_TCP_CONG_YEAH=m
    CONFIG_TCP_CONG_ILLINOIS=m
    CONFIG_DEFAULT_CUBIC=y
    # CONFIG_DEFAULT_RENO is not set
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IPV6=y
    CONFIG_IPV6_PRIVACY=y
    CONFIG_IPV6_ROUTER_PREF=y
    CONFIG_IPV6_ROUTE_INFO=y
    CONFIG_IPV6_OPTIMISTIC_DAD=y
    CONFIG_INET6_AH=m
    CONFIG_INET6_ESP=m
    CONFIG_INET6_IPCOMP=m
    CONFIG_IPV6_MIP6=m
    CONFIG_INET6_XFRM_TUNNEL=m
    CONFIG_INET6_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_TRANSPORT=m
    CONFIG_INET6_XFRM_MODE_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_BEET=m
    CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
    CONFIG_IPV6_SIT=m
    CONFIG_IPV6_SIT_6RD=y
    CONFIG_IPV6_NDISC_NODETYPE=y
    CONFIG_IPV6_TUNNEL=m
    CONFIG_IPV6_GRE=m
    CONFIG_IPV6_MULTIPLE_TABLES=y
    CONFIG_IPV6_SUBTREES=y
    # CONFIG_IPV6_MROUTE is not set
    CONFIG_NETLABEL=y
    CONFIG_NETWORK_SECMARK=y
    CONFIG_NETWORK_PHY_TIMESTAMPING=y
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_NETFILTER_ADVANCED=y
    CONFIG_BRIDGE_NETFILTER=y
    # Core Netfilter Configuration
    CONFIG_NETFILTER_NETLINK=m
    CONFIG_NETFILTER_NETLINK_ACCT=m
    CONFIG_NETFILTER_NETLINK_QUEUE=m
    CONFIG_NETFILTER_NETLINK_LOG=m
    CONFIG_NF_CONNTRACK=m
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_SECMARK=y
    CONFIG_NF_CONNTRACK_ZONES=y
    CONFIG_NF_CONNTRACK_PROCFS=y
    CONFIG_NF_CONNTRACK_EVENTS=y
    CONFIG_NF_CONNTRACK_TIMEOUT=y
    CONFIG_NF_CONNTRACK_TIMESTAMP=y
    CONFIG_NF_CONNTRACK_LABELS=y
    CONFIG_NF_CT_PROTO_DCCP=m
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    CONFIG_NF_CT_PROTO_UDPLITE=m
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_BROADCAST=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_SNMP=m
    CONFIG_NF_CONNTRACK_PPTP=m
    CONFIG_NF_CONNTRACK_SANE=m
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NF_CT_NETLINK=m
    CONFIG_NF_CT_NETLINK_TIMEOUT=m
    CONFIG_NF_CT_NETLINK_HELPER=m
    CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_NF_NAT_PROTO_DCCP=m
    CONFIG_NF_NAT_PROTO_UDPLITE=m
    CONFIG_NF_NAT_PROTO_SCTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NETFILTER_TPROXY=m
    CONFIG_NETFILTER_XTABLES=m
    # Xtables combined modules
    CONFIG_NETFILTER_XT_MARK=m
    CONFIG_NETFILTER_XT_CONNMARK=m
    CONFIG_NETFILTER_XT_SET=m
    # Xtables targets
    CONFIG_NETFILTER_XT_TARGET_AUDIT=m
    CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
    CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
    CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
    CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
    CONFIG_NETFILTER_XT_TARGET_CT=m
    CONFIG_NETFILTER_XT_TARGET_DSCP=m
    CONFIG_NETFILTER_XT_TARGET_HL=m
    CONFIG_NETFILTER_XT_TARGET_HMARK=m
    CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
    CONFIG_NETFILTER_XT_TARGET_LED=m
    CONFIG_NETFILTER_XT_TARGET_LOG=m
    CONFIG_NETFILTER_XT_TARGET_MARK=m
    CONFIG_NETFILTER_XT_TARGET_NETMAP=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=m
    CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
    CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
    CONFIG_NETFILTER_XT_TARGET_RATEEST=m
    CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
    CONFIG_NETFILTER_XT_TARGET_TEE=m
    CONFIG_NETFILTER_XT_TARGET_TPROXY=m
    CONFIG_NETFILTER_XT_TARGET_TRACE=m
    CONFIG_NETFILTER_XT_TARGET_SECMARK=m
    CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
    CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
    # Xtables matches
    CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
    CONFIG_NETFILTER_XT_MATCH_BPF=m
    CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
    CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
    CONFIG_NETFILTER_XT_MATCH_CPU=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ECN=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_HL=m
    CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
    CONFIG_NETFILTER_XT_MATCH_IPVS=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_NFACCT=m
    CONFIG_NETFILTER_XT_MATCH_OSF=m
    CONFIG_NETFILTER_XT_MATCH_OWNER=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=m
    CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_RATEEST=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_RECENT=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_SOCKET=m
    CONFIG_NETFILTER_XT_MATCH_STATE=m
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_TIME=m
    CONFIG_NETFILTER_XT_MATCH_U32=m
    CONFIG_IP_SET=m
    CONFIG_IP_SET_MAX=256
    CONFIG_IP_SET_BITMAP_IP=m
    CONFIG_IP_SET_BITMAP_IPMAC=m
    CONFIG_IP_SET_BITMAP_PORT=m
    CONFIG_IP_SET_HASH_IP=m
    CONFIG_IP_SET_HASH_IPPORT=m
    CONFIG_IP_SET_HASH_IPPORTIP=m
    CONFIG_IP_SET_HASH_IPPORTNET=m
    CONFIG_IP_SET_HASH_NET=m
    CONFIG_IP_SET_HASH_NETPORT=m
    CONFIG_IP_SET_HASH_NETIFACE=m
    CONFIG_IP_SET_LIST_SET=m
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_IPV6 is not set
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12
    # IPVS transport protocol load balancing support
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_AH_ESP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y
    CONFIG_IP_VS_PROTO_SCTP=y
    # IPVS scheduler
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m
    # IPVS SH scheduler
    CONFIG_IP_VS_SH_TAB_BITS=8
    # IPVS application helper
    CONFIG_IP_VS_FTP=m
    CONFIG_IP_VS_NFCT=y
    CONFIG_IP_VS_PE_SIP=m
    # IP: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV4=m
    CONFIG_NF_CONNTRACK_IPV4=m
    # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_AH=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_RPFILTER=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_NF_NAT_IPV4=m
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_CLUSTERIP=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_TTL=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_SECURITY=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m
    # IPv6: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV6=m
    CONFIG_NF_CONNTRACK_IPV6=m
    CONFIG_IP6_NF_IPTABLES=m
    CONFIG_IP6_NF_MATCH_AH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m
    CONFIG_IP6_NF_MATCH_MH=m
    CONFIG_IP6_NF_MATCH_RPFILTER=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_TARGET_HL=m
    CONFIG_IP6_NF_FILTER=m
    CONFIG_IP6_NF_TARGET_REJECT=m
    CONFIG_IP6_NF_MANGLE=m
    CONFIG_IP6_NF_RAW=m
    CONFIG_IP6_NF_SECURITY=m
    CONFIG_NF_NAT_IPV6=m
    CONFIG_IP6_NF_TARGET_MASQUERADE=m
    CONFIG_IP6_NF_TARGET_NPT=m
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_IP6=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    CONFIG_BRIDGE_EBT_ULOG=m
    CONFIG_BRIDGE_EBT_NFLOG=m
    CONFIG_IP_DCCP=m
    CONFIG_INET_DCCP_DIAG=m
    # DCCP CCIDs Configuration
    # CONFIG_IP_DCCP_CCID2_DEBUG is not set
    CONFIG_IP_DCCP_CCID3=y
    # CONFIG_IP_DCCP_CCID3_DEBUG is not set
    CONFIG_IP_DCCP_TFRC_LIB=y
    # DCCP Kernel Hacking
    # CONFIG_IP_DCCP_DEBUG is not set
    CONFIG_NET_DCCPPROBE=m
    CONFIG_IP_SCTP=m
    CONFIG_NET_SCTPPROBE=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
    CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
    # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
    CONFIG_SCTP_COOKIE_HMAC_MD5=y
    CONFIG_SCTP_COOKIE_HMAC_SHA1=y
    # CONFIG_RDS is not set
    # CONFIG_TIPC is not set
    CONFIG_ATM=m
    CONFIG_ATM_CLIP=m
    # CONFIG_ATM_CLIP_NO_ICMP is not set
    CONFIG_ATM_LANE=m
    CONFIG_ATM_MPOA=m
    CONFIG_ATM_BR2684=m
    # CONFIG_ATM_BR2684_IPFILTER is not set
    CONFIG_L2TP=m
    # CONFIG_L2TP_DEBUGFS is not set
    CONFIG_L2TP_V3=y
    CONFIG_L2TP_IP=m
    CONFIG_L2TP_ETH=m
    CONFIG_STP=m
    CONFIG_MRP=m
    CONFIG_BRIDGE=m
    CONFIG_BRIDGE_IGMP_SNOOPING=y
    CONFIG_BRIDGE_VLAN_FILTERING=y
    CONFIG_HAVE_NET_DSA=y
    CONFIG_NET_DSA=m
    CONFIG_NET_DSA_TAG_DSA=y
    CONFIG_NET_DSA_TAG_EDSA=y
    CONFIG_NET_DSA_TAG_TRAILER=y
    CONFIG_VLAN_8021Q=m
    # CONFIG_VLAN_8021Q_GVRP is not set
    CONFIG_VLAN_8021Q_MVRP=y
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    CONFIG_LLC2=m
    CONFIG_IPX=m
    # CONFIG_IPX_INTERN is not set
    CONFIG_ATALK=m
    CONFIG_DEV_APPLETALK=m
    CONFIG_LTPC=m
    CONFIG_COPS=m
    CONFIG_COPS_DAYNA=y
    CONFIG_COPS_TANGENT=y
    CONFIG_IPDDP=m
    CONFIG_IPDDP_ENCAP=y
    CONFIG_IPDDP_DECAP=y
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    CONFIG_PHONET=m
    CONFIG_IEEE802154=m
    CONFIG_IEEE802154_6LOWPAN=m
    CONFIG_MAC802154=m
    CONFIG_NET_SCHED=y
    # Queueing/Scheduling
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_HFSC=m
    CONFIG_NET_SCH_ATM=m
    CONFIG_NET_SCH_PRIO=m
    CONFIG_NET_SCH_MULTIQ=m
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFB=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_NETEM=m
    CONFIG_NET_SCH_DRR=m
    CONFIG_NET_SCH_MQPRIO=m
    CONFIG_NET_SCH_CHOKE=m
    CONFIG_NET_SCH_QFQ=m
    CONFIG_NET_SCH_CODEL=m
    CONFIG_NET_SCH_FQ_CODEL=m
    CONFIG_NET_SCH_INGRESS=m
    CONFIG_NET_SCH_PLUG=m
    # Classification
    CONFIG_NET_CLS=y
    CONFIG_NET_CLS_BASIC=m
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    # CONFIG_CLS_U32_PERF is not set
    # CONFIG_CLS_U32_MARK is not set
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    CONFIG_NET_CLS_FLOW=m
    CONFIG_NET_CLS_CGROUP=y
    # CONFIG_NET_EMATCH is not set
    CONFIG_NET_CLS_ACT=y
    CONFIG_NET_ACT_POLICE=m
    CONFIG_NET_ACT_GACT=m
    CONFIG_GACT_PROB=y
    CONFIG_NET_ACT_MIRRED=m
    CONFIG_NET_ACT_IPT=m
    CONFIG_NET_ACT_NAT=m
    CONFIG_NET_ACT_PEDIT=m
    CONFIG_NET_ACT_SIMP=m
    CONFIG_NET_ACT_SKBEDIT=m
    CONFIG_NET_ACT_CSUM=m
    CONFIG_NET_CLS_IND=y
    CONFIG_NET_SCH_FIFO=y
    # CONFIG_DCB is not set
    CONFIG_DNS_RESOLVER=y
    CONFIG_BATMAN_ADV=m
    CONFIG_BATMAN_ADV_BLA=y
    CONFIG_BATMAN_ADV_DAT=y
    # CONFIG_BATMAN_ADV_DEBUG is not set
    CONFIG_OPENVSWITCH=m
    CONFIG_VSOCKETS=m
    CONFIG_VMWARE_VMCI_VSOCKETS=m
    CONFIG_RPS=y
    CONFIG_RFS_ACCEL=y
    CONFIG_XPS=y
    CONFIG_NETPRIO_CGROUP=m
    CONFIG_BQL=y
    # Network testing
    CONFIG_NET_PKTGEN=m
    CONFIG_NET_TCPPROBE=m
    CONFIG_NET_DROP_MONITOR=y
    CONFIG_HAMRADIO=y
    # Packet Radio protocols
    CONFIG_AX25=m
    CONFIG_AX25_DAMA_SLAVE=y
    CONFIG_NETROM=m
    CONFIG_ROSE=m
    # AX.25 network device drivers
    CONFIG_MKISS=m
    CONFIG_6PACK=m
    CONFIG_BPQETHER=m
    CONFIG_SCC=m
    # CONFIG_SCC_DELAY is not set
    # CONFIG_SCC_TRXECHO is not set
    CONFIG_BAYCOM_SER_FDX=m
    CONFIG_BAYCOM_SER_HDX=m
    CONFIG_BAYCOM_PAR=m
    CONFIG_BAYCOM_EPP=m
    CONFIG_YAM=m
    # CONFIG_CAN is not set
    CONFIG_IRDA=m
    # IrDA protocols
    CONFIG_IRLAN=m
    CONFIG_IRNET=m
    CONFIG_IRCOMM=m
    CONFIG_IRDA_ULTRA=y
    # IrDA options
    CONFIG_IRDA_CACHE_LAST_LSAP=y
    CONFIG_IRDA_FAST_RR=y
    # CONFIG_IRDA_DEBUG is not set
    # Infrared-port device drivers
    # SIR device drivers
    CONFIG_IRTTY_SIR=m
    # Dongle support
    CONFIG_DONGLE=y
    CONFIG_ESI_DONGLE=m
    CONFIG_ACTISYS_DONGLE=m
    CONFIG_TEKRAM_DONGLE=m
    CONFIG_TOIM3232_DONGLE=m
    CONFIG_LITELINK_DONGLE=m
    CONFIG_MA600_DONGLE=m
    CONFIG_GIRBIL_DONGLE=m
    CONFIG_MCP2120_DONGLE=m
    CONFIG_OLD_BELKIN_DONGLE=m
    CONFIG_ACT200L_DONGLE=m
    CONFIG_KINGSUN_DONGLE=m
    CONFIG_KSDAZZLE_DONGLE=m
    CONFIG_KS959_DONGLE=m
    # FIR device drivers
    CONFIG_USB_IRDA=m
    CONFIG_SIGMATEL_FIR=m
    CONFIG_NSC_FIR=m
    CONFIG_WINBOND_FIR=m
    CONFIG_TOSHIBA_FIR=m
    CONFIG_SMC_IRCC_FIR=m
    CONFIG_ALI_FIR=m
    CONFIG_VLSI_FIR=m
    CONFIG_VIA_FIR=m
    CONFIG_MCS_FIR=m
    CONFIG_BT=m
    CONFIG_BT_RFCOMM=m
    CONFIG_BT_RFCOMM_TTY=y
    CONFIG_BT_BNEP=m
    # CONFIG_BT_BNEP_MC_FILTER is not set
    # CONFIG_BT_BNEP_PROTO_FILTER is not set
    # CONFIG_BT_CMTP is not set
    CONFIG_BT_HIDP=m
    # Bluetooth device drivers
    CONFIG_BT_HCIBTUSB=m
    CONFIG_BT_HCIBTSDIO=m
    CONFIG_BT_HCIUART=m
    CONFIG_BT_HCIUART_H4=y
    CONFIG_BT_HCIUART_BCSP=y
    CONFIG_BT_HCIUART_ATH3K=y
    CONFIG_BT_HCIUART_LL=y
    CONFIG_BT_HCIUART_3WIRE=y
    CONFIG_BT_HCIBCM203X=m
    CONFIG_BT_HCIBPA10X=m
    CONFIG_BT_HCIBFUSB=m
    CONFIG_BT_HCIDTL1=m
    CONFIG_BT_HCIBT3C=m
    CONFIG_BT_HCIBLUECARD=m
    CONFIG_BT_HCIBTUART=m
    CONFIG_BT_HCIVHCI=m
    CONFIG_BT_MRVL=m
    CONFIG_BT_MRVL_SDIO=m
    CONFIG_BT_ATH3K=m
    CONFIG_BT_WILINK=m
    CONFIG_AF_RXRPC=m
    # CONFIG_AF_RXRPC_DEBUG is not set
    CONFIG_RXKAD=m
    CONFIG_FIB_RULES=y
    CONFIG_WIRELESS=y
    CONFIG_WIRELESS_EXT=y
    CONFIG_WEXT_CORE=y
    CONFIG_WEXT_PROC=y
    CONFIG_WEXT_SPY=y
    CONFIG_WEXT_PRIV=y
    CONFIG_CFG80211=m
    # CONFIG_NL80211_TESTMODE is not set
    # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
    # CONFIG_CFG80211_REG_DEBUG is not set
    CONFIG_CFG80211_DEFAULT_PS=y
    # CONFIG_CFG80211_DEBUGFS is not set
    # CONFIG_CFG80211_INTERNAL_REGDB is not set
    CONFIG_CFG80211_WEXT=y
    CONFIG_LIB80211=m
    CONFIG_LIB80211_CRYPT_WEP=m
    CONFIG_LIB80211_CRYPT_CCMP=m
    CONFIG_LIB80211_CRYPT_TKIP=m
    # CONFIG_LIB80211_DEBUG is not set
    CONFIG_MAC80211=m
    CONFIG_MAC80211_HAS_RC=y
    CONFIG_MAC80211_RC_MINSTREL=y
    CONFIG_MAC80211_RC_MINSTREL_HT=y
    CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
    CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
    CONFIG_MAC80211_MESH=y
    CONFIG_MAC80211_LEDS=y
    # CONFIG_MAC80211_DEBUGFS is not set
    # CONFIG_MAC80211_MESSAGE_TRACING is not set
    # CONFIG_MAC80211_DEBUG_MENU is not set
    CONFIG_WIMAX=m
    CONFIG_WIMAX_DEBUG_LEVEL=8
    CONFIG_RFKILL=m
    CONFIG_RFKILL_LEDS=y
    CONFIG_RFKILL_INPUT=y
    CONFIG_NET_9P=m
    CONFIG_NET_9P_VIRTIO=m
    # CONFIG_NET_9P_DEBUG is not set
    CONFIG_CAIF=m
    # CONFIG_CAIF_DEBUG is not set
    CONFIG_CAIF_NETDEV=m
    CONFIG_CAIF_USB=m
    CONFIG_CEPH_LIB=m
    # CONFIG_CEPH_LIB_PRETTYDEBUG is not set
    # CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
    CONFIG_NFC=m
    CONFIG_NFC_NCI=m
    CONFIG_NFC_HCI=m
    # CONFIG_NFC_SHDLC is not set
    # CONFIG_NFC_LLCP is not set
    # Near Field Communication (NFC) devices
    CONFIG_NFC_PN533=m
    CONFIG_NFC_WILINK=m
    CONFIG_NFC_PN544=m
    CONFIG_NFC_MICROREAD=m
    # Device Drivers
    # Generic Driver Options
    CONFIG_UEVENT_HELPER_PATH=""
    CONFIG_DEVTMPFS=y
    # CONFIG_DEVTMPFS_MOUNT is not set
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    CONFIG_FIRMWARE_IN_KERNEL=y
    CONFIG_EXTRA_FIRMWARE=""
    # CONFIG_FW_LOADER_USER_HELPER is not set
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    # CONFIG_SYS_HYPERVISOR is not set
    # CONFIG_GENERIC_CPU_DEVICES is not set
    CONFIG_REGMAP=y
    CONFIG_REGMAP_I2C=m
    CONFIG_REGMAP_MMIO=m
    CONFIG_REGMAP_IRQ=y
    CONFIG_DMA_SHARED_BUFFER=y
    # CONFIG_CMA is not set
    # Bus devices
    CONFIG_CONNECTOR=y
    CONFIG_PROC_EVENTS=y
    CONFIG_MTD=m
    CONFIG_MTD_TESTS=m
    CONFIG_MTD_REDBOOT_PARTS=m
    CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
    # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
    # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
    CONFIG_MTD_CMDLINE_PARTS=m
    CONFIG_MTD_OF_PARTS=m
    CONFIG_MTD_AR7_PARTS=m
    # User Modules And Translation Layers
    CONFIG_MTD_CHAR=m
    CONFIG_MTD_BLKDEVS=m
    CONFIG_MTD_BLOCK=m
    CONFIG_MTD_BLOCK_RO=m
    CONFIG_FTL=m
    CONFIG_NFTL=m
    CONFIG_NFTL_RW=y
    CONFIG_INFTL=m
    CONFIG_RFD_FTL=m
    CONFIG_SSFDC=m
    # CONFIG_SM_FTL is not set
    CONFIG_MTD_OOPS=m
    CONFIG_MTD_SWAP=m
    # RAM/ROM/Flash chip drivers
    CONFIG_MTD_CFI=m
    CONFIG_MTD_JEDECPROBE=m
    CONFIG_MTD_GEN_PROBE=m
    # CONFIG_MTD_CFI_ADV_OPTIONS is not set
    CONFIG_MTD_MAP_BANK_WIDTH_1=y
    CONFIG_MTD_MAP_BANK_WIDTH_2=y
    CONFIG_MTD_MAP_BANK_WIDTH_4=y
    # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
    CONFIG_MTD_CFI_I1=y
    CONFIG_MTD_CFI_I2=y
    # CONFIG_MTD_CFI_I4 is not set
    # CONFIG_MTD_CFI_I8 is not set
    CONFIG_MTD_CFI_INTELEXT=m
    CONFIG_MTD_CFI_AMDSTD=m
    CONFIG_MTD_CFI_STAA=m
    CONFIG_MTD_CFI_UTIL=m
    CONFIG_MTD_RAM=m
    CONFIG_MTD_ROM=m
    CONFIG_MTD_ABSENT=m
    # Mapping drivers for chip access
    CONFIG_MTD_COMPLEX_MAPPINGS=y
    # CONFIG_MTD_PHYSMAP is not set
    CONFIG_MTD_PHYSMAP_OF=m
    CONFIG_MTD_SC520CDP=m
    CONFIG_MTD_NETSC520=m
    CONFIG_MTD_TS5500=m
    # CONFIG_MTD_SBC_GXX is not set
    # CONFIG_MTD_AMD76XROM is not set
    # CONFIG_MTD_ICHXROM is not set
    # CONFIG_MTD_ESB2ROM is not set
    # CONFIG_MTD_CK804XROM is not set
    CONFIG_MTD_SCB2_FLASH=m
    # CONFIG_MTD_NETtel is not set
    # CONFIG_MTD_L440GX is not set
    CONFIG_MTD_PCI=m
    # CONFIG_MTD_PCMCIA is not set
    # CONFIG_MTD_GPIO_ADDR is not set
    # CONFIG_MTD_INTEL_VR_NOR is not set
    CONFIG_MTD_PLATRAM=m
    # CONFIG_MTD_LATCH_ADDR is not set
    # Self-contained MTD device drivers
    CONFIG_MTD_PMC551=m
    # CONFIG_MTD_PMC551_BUGFIX is not set
    # CONFIG_MTD_PMC551_DEBUG is not set
    # CONFIG_MTD_DATAFLASH is not set
    # CONFIG_MTD_M25P80 is not set
    # CONFIG_MTD_SST25L is not set
    # CONFIG_MTD_SLRAM is not set
    CONFIG_MTD_PHRAM=m
    CONFIG_MTD_MTDRAM=m
    CONFIG_MTDRAM_TOTAL_SIZE=4096
    CONFIG_MTDRAM_ERASE_SIZE=128
    CONFIG_MTD_BLOCK2MTD=m
    # Disk-On-Chip Device Drivers
    # CONFIG_MTD_DOC2000 is not set
    # CONFIG_MTD_DOC2001 is not set
    # CONFIG_MTD_DOC2001PLUS is not set
    CONFIG_MTD_DOCG3=m
    CONFIG_BCH_CONST_M=14
    CONFIG_BCH_CONST_T=4
    CONFIG_MTD_NAND_ECC=m
    CONFIG_MTD_NAND_ECC_SMC=y
    CONFIG_MTD_NAND=m
    # CONFIG_MTD_NAND_ECC_BCH is not set
    CONFIG_MTD_SM_COMMON=m
    # CONFIG_MTD_NAND_MUSEUM_IDS is not set
    # CONFIG_MTD_NAND_DENALI is not set
    CONFIG_MTD_NAND_IDS=m
    CONFIG_MTD_NAND_RICOH=m
    CONFIG_MTD_NAND_DISKONCHIP=m
    # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
    CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
    # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
    CONFIG_MTD_NAND_DOCG4=m
    # CONFIG_MTD_NAND_CAFE is not set
    CONFIG_MTD_NAND_CS553X=m
    CONFIG_MTD_NAND_NANDSIM=m
    # CONFIG_MTD_NAND_PLATFORM is not set
    CONFIG_MTD_ALAUDA=m
    # CONFIG_MTD_ONENAND is not set
    # LPDDR flash memory drivers
    CONFIG_MTD_LPDDR=m
    CONFIG_MTD_QINFO_PROBE=m
    CONFIG_MTD_UBI=m
    CONFIG_MTD_UBI_WL_THRESHOLD=4096
    CONFIG_MTD_UBI_BEB_LIMIT=20
    # CONFIG_MTD_UBI_FASTMAP is not set
    # CONFIG_MTD_UBI_GLUEBI is not set
    CONFIG_OF=y
    # Device Tree and Open Firmware support
    CONFIG_PROC_DEVICETREE=y
    # CONFIG_OF_SELFTEST is not set
    CONFIG_OF_PROMTREE=y
    CONFIG_OF_ADDRESS=y
    CONFIG_OF_IRQ=y
    CONFIG_OF_DEVICE=y
    CONFIG_OF_I2C=m
    CONFIG_OF_NET=y
    CONFIG_OF_MDIO=m
    CONFIG_OF_PCI=y
    CONFIG_OF_PCI_IRQ=y
    CONFIG_OF_MTD=y
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_SERIAL=m
    # CONFIG_PARPORT_PC_FIFO is not set
    # CONFIG_PARPORT_PC_SUPERIO is not set
    CONFIG_PARPORT_PC_PCMCIA=m
    # CONFIG_PARPORT_GSC is not set
    CONFIG_PARPORT_AX88796=m
    CONFIG_PARPORT_1284=y
    CONFIG_PARPORT_NOT_PC=y
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG_MESSAGES is not set
    # Protocols
    CONFIG_ISAPNP=y
    # CONFIG_PNPBIOS is not set
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    CONFIG_BLK_DEV_FD=m
    # CONFIG_PARIDE is not set
    CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
    CONFIG_BLK_CPQ_DA=m
    CONFIG_BLK_CPQ_CISS_DA=m
    # CONFIG_CISS_SCSI_TAPE is not set
    CONFIG_BLK_DEV_DAC960=m
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_DRBD=m
    # CONFIG_DRBD_FAULT_INJECTION is not set
    CONFIG_BLK_DEV_NBD=m
    CONFIG_BLK_DEV_NVME=m
    CONFIG_BLK_DEV_OSD=m
    CONFIG_BLK_DEV_SX8=m
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=16384
    # CONFIG_BLK_DEV_XIP is not set
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set
    CONFIG_ATA_OVER_ETH=m
    CONFIG_VIRTIO_BLK=m
    # CONFIG_BLK_DEV_HD is not set
    CONFIG_BLK_DEV_RBD=m
    CONFIG_BLK_DEV_RSXX=m
    # Misc devices
    CONFIG_SENSORS_LIS3LV02D=m
    CONFIG_AD525X_DPOT=m
    CONFIG_AD525X_DPOT_I2C=m
    # CONFIG_AD525X_DPOT_SPI is not set
    # CONFIG_IBM_ASM is not set
    CONFIG_PHANTOM=m
    CONFIG_INTEL_MID_PTI=m
    CONFIG_SGI_IOC4=m
    CONFIG_TIFM_CORE=m
    CONFIG_TIFM_7XX1=m
    CONFIG_ICS932S401=m
    # CONFIG_ATMEL_SSC is not set
    CONFIG_ENCLOSURE_SERVICES=m
    CONFIG_CS5535_MFGPT=m
    CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
    CONFIG_CS5535_CLOCK_EVENT_SRC=m
    CONFIG_HP_ILO=m
    CONFIG_APDS9802ALS=m
    CONFIG_ISL29003=m
    CONFIG_ISL29020=m
    CONFIG_SENSORS_TSL2550=m
    CONFIG_SENSORS_BH1780=m
    CONFIG_SENSORS_BH1770=m
    CONFIG_SENSORS_APDS990X=m
    CONFIG_HMC6352=m
    CONFIG_DS1682=m
    # CONFIG_TI_DAC7512 is not set
    CONFIG_VMWARE_BALLOON=m
    CONFIG_BMP085=y
    CONFIG_BMP085_I2C=m
    # CONFIG_BMP085_SPI is not set
    # CONFIG_PCH_PHUB is not set
    CONFIG_USB_SWITCH_FSA9480=m
    # CONFIG_LATTICE_ECP3_CONFIG is not set
    CONFIG_C2PORT=m
    CONFIG_C2PORT_DURAMAR_2150=m
    # EEPROM support
    CONFIG_EEPROM_AT24=m
    # CONFIG_EEPROM_AT25 is not set
    CONFIG_EEPROM_LEGACY=m
    CONFIG_EEPROM_MAX6875=m
    CONFIG_EEPROM_93CX6=m
    # CONFIG_EEPROM_93XX46 is not set
    CONFIG_CB710_CORE=m
    # CONFIG_CB710_DEBUG is not set
    CONFIG_CB710_DEBUG_ASSUMPTIONS=y
    # Texas Instruments shared transport line discipline
    CONFIG_TI_ST=m
    CONFIG_SENSORS_LIS3_I2C=m
    # Altera FPGA firmware download module
    CONFIG_ALTERA_STAPL=m
    CONFIG_INTEL_MEI=m
    CONFIG_INTEL_MEI_ME=y
    CONFIG_VMWARE_VMCI=m
    CONFIG_HAVE_IDE=y
    # CONFIG_IDE is not set
    # SCSI device support
    CONFIG_SCSI_MOD=m
    CONFIG_RAID_ATTRS=m
    CONFIG_SCSI=m
    CONFIG_SCSI_DMA=y
    CONFIG_SCSI_TGT=m
    CONFIG_SCSI_NETLINK=y
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=m
    CONFIG_CHR_DEV_ST=m
    CONFIG_CHR_DEV_OSST=m
    CONFIG_BLK_DEV_SR=m
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=m
    CONFIG_CHR_DEV_SCH=m
    CONFIG_SCSI_ENCLOSURE=m
    CONFIG_SCSI_MULTI_LUN=y
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set
    # SCSI Transports
    CONFIG_SCSI_SPI_ATTRS=m
    CONFIG_SCSI_FC_ATTRS=m
    # CONFIG_SCSI_FC_TGT_ATTRS is not set
    CONFIG_SCSI_ISCSI_ATTRS=m
    CONFIG_SCSI_SAS_ATTRS=m
    CONFIG_SCSI_SAS_LIBSAS=m
    CONFIG_SCSI_SAS_ATA=y
    CONFIG_SCSI_SAS_HOST_SMP=y
    CONFIG_SCSI_SRP_ATTRS=m
    CONFIG_SCSI_SRP_TGT_ATTRS=y
    CONFIG_SCSI_LOWLEVEL=y
    CONFIG_ISCSI_TCP=m
    CONFIG_ISCSI_BOOT_SYSFS=m
    CONFIG_SCSI_CXGB3_ISCSI=m
    CONFIG_SCSI_CXGB4_ISCSI=m
    CONFIG_SCSI_BNX2_ISCSI=m
    CONFIG_SCSI_BNX2X_FCOE=m
    CONFIG_BE2ISCSI=m
    CONFIG_BLK_DEV_3W_XXXX_RAID=m
    CONFIG_SCSI_HPSA=m
    CONFIG_SCSI_3W_9XXX=m
    CONFIG_SCSI_3W_SAS=m
    CONFIG_SCSI_7000FASST=m
    CONFIG_SCSI_ACARD=m
    CONFIG_SCSI_AHA152X=m
    CONFIG_SCSI_AHA1542=m
    CONFIG_SCSI_AACRAID=m
    CONFIG_SCSI_AIC7XXX=m
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
    CONFIG_AIC7XXX_DEBUG_MASK=0
    CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    CONFIG_SCSI_AIC79XX=m
    CONFIG_AIC79XX_CMDS_PER_DEVICE=32
    CONFIG_AIC79XX_RESET_DELAY_MS=15000
    # CONFIG_AIC79XX_DEBUG_ENABLE is not set
    CONFIG_AIC79XX_DEBUG_MASK=0
    CONFIG_AIC79XX_REG_PRETTY_PRINT=y
    CONFIG_SCSI_AIC94XX=m
    # CONFIG_AIC94XX_DEBUG is not set
    CONFIG_SCSI_MVSAS=m
    # CONFIG_SCSI_MVSAS_DEBUG is not set
    CONFIG_SCSI_MVSAS_TASKLET=y
    CONFIG_SCSI_MVUMI=m
    CONFIG_SCSI_DPT_I2O=m
    CONFIG_SCSI_ADVANSYS=m
    CONFIG_SCSI_IN2000=m
    CONFIG_SCSI_ARCMSR=m
    CONFIG_MEGARAID_NEWGEN=y
    CONFIG_MEGARAID_MM=m
    CONFIG_MEGARAID_MAILBOX=m
    CONFIG_MEGARAID_LEGACY=m
    CONFIG_MEGARAID_SAS=m
    CONFIG_SCSI_MPT2SAS=m
    CONFIG_SCSI_MPT2SAS_MAX_SGE=128
    # CONFIG_SCSI_MPT2SAS_LOGGING is not set
    CONFIG_SCSI_MPT3SAS=m
    CONFIG_SCSI_MPT3SAS_MAX_SGE=128
    CONFIG_SCSI_MPT3SAS_LOGGING=y
    CONFIG_SCSI_UFSHCD=m
    CONFIG_SCSI_UFSHCD_PCI=m
    CONFIG_SCSI_HPTIOP=m
    CONFIG_SCSI_BUSLOGIC=m
    # CONFIG_SCSI_FLASHPOINT is not set
    CONFIG_VMWARE_PVSCSI=m
    CONFIG_HYPERV_STORAGE=m
    CONFIG_LIBFC=m
    CONFIG_LIBFCOE=m
    CONFIG_FCOE=m
    CONFIG_FCOE_FNIC=m
    CONFIG_SCSI_DMX3191D=m
    CONFIG_SCSI_DTC3280=m
    CONFIG_SCSI_EATA=m
    # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
    # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
    CONFIG_SCSI_EATA_MAX_TAGS=16
    CONFIG_SCSI_FUTURE_DOMAIN=m
    CONFIG_SCSI_GDTH=m
    CONFIG_SCSI_ISCI=m
    CONFIG_SCSI_GENERIC_NCR5380=m
    CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
    CONFIG_SCSI_GENERIC_NCR53C400=y
    CONFIG_SCSI_IPS=m
    CONFIG_SCSI_INITIO=m
    CONFIG_SCSI_INIA100=m
    CONFIG_SCSI_PPA=m
    CONFIG_SCSI_IMM=m
    # CONFIG_SCSI_IZIP_EPP16 is not set
    # CONFIG_SCSI_IZIP_SLOW_CTR is not set
    CONFIG_SCSI_NCR53C406A=m
    CONFIG_SCSI_STEX=m
    CONFIG_SCSI_SYM53C8XX_2=m
    CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
    CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
    CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
    CONFIG_SCSI_SYM53C8XX_MMIO=y
    CONFIG_SCSI_IPR=m
    # CONFIG_SCSI_IPR_TRACE is not set
    # CONFIG_SCSI_IPR_DUMP is not set
    CONFIG_SCSI_PAS16=m
    CONFIG_SCSI_QLOGIC_FAS=m
    CONFIG_SCSI_QLOGIC_1280=m
    CONFIG_SCSI_QLA_FC=m
    CONFIG_TCM_QLA2XXX=m
    CONFIG_SCSI_QLA_ISCSI=m
    CONFIG_SCSI_LPFC=m
    # CONFIG_SCSI_LPFC_DEBUG_FS is not set
    CONFIG_SCSI_SYM53C416=m
    CONFIG_SCSI_DC395x=m
    CONFIG_SCSI_DC390T=m
    CONFIG_SCSI_T128=m
    CONFIG_SCSI_U14_34F=m
    # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
    # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
    CONFIG_SCSI_U14_34F_MAX_TAGS=8
    CONFIG_SCSI_ULTRASTOR=m
    CONFIG_SCSI_NSP32=m
    # CONFIG_SCSI_DEBUG is not set
    CONFIG_SCSI_PMCRAID=m
    CONFIG_SCSI_PM8001=m
    CONFIG_SCSI_SRP=m
    CONFIG_SCSI_BFA_FC=m
    CONFIG_SCSI_VIRTIO=m
    CONFIG_SCSI_CHELSIO_FCOE=m
    CONFIG_SCSI_LOWLEVEL_PCMCIA=y
    CONFIG_PCMCIA_AHA152X=m
    CONFIG_PCMCIA_FDOMAIN=m
    CONFIG_PCMCIA_NINJA_SCSI=m
    CONFIG_PCMCIA_QLOGIC=m
    CONFIG_PCMCIA_SYM53C500=m
    CONFIG_SCSI_DH=m
    CONFIG_SCSI_DH_RDAC=m
    CONFIG_SCSI_DH_HP_SW=m
    CONFIG_SCSI_DH_EMC=m
    CONFIG_SCSI_DH_ALUA=m
    CONFIG_SCSI_OSD_INITIATOR=m
    CONFIG_SCSI_OSD_ULD=m
    CONFIG_SCSI_OSD_DPRINT_SENSE=0
    # CONFIG_SCSI_OSD_DEBUG is not set
    CONFIG_ATA=m
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_VERBOSE_ERROR=y
    CONFIG_ATA_ACPI=y
    CONFIG_SATA_ZPODD=y
    CONFIG_SATA_PMP=y
    # Controllers with non-SFF native interface
    CONFIG_SATA_AHCI=m
    CONFIG_SATA_AHCI_PLATFORM=m
    CONFIG_SATA_INIC162X=m
    CONFIG_SATA_ACARD_AHCI=m
    CONFIG_SATA_SIL24=m
    CONFIG_ATA_SFF=y
    # SFF controllers with custom DMA interface
    CONFIG_PDC_ADMA=m
    CONFIG_SATA_QSTOR=m
    CONFIG_SATA_SX4=m
    CONFIG_ATA_BMDMA=y
    # SATA SFF controllers with BMDMA
    CONFIG_ATA_PIIX=m
    CONFIG_SATA_HIGHBANK=m
    CONFIG_SATA_MV=m
    CONFIG_SATA_NV=m
    CONFIG_SATA_PROMISE=m
    CONFIG_SATA_SIL=m
    CONFIG_SATA_SIS=m
    CONFIG_SATA_SVW=m
    CONFIG_SATA_ULI=m
    CONFIG_SATA_VIA=m
    CONFIG_SATA_VITESSE=m
    # PATA SFF controllers with BMDMA
    CONFIG_PATA_ALI=m
    CONFIG_PATA_AMD=m
    CONFIG_PATA_ARASAN_CF=m
    CONFIG_PATA_ARTOP=m
    CONFIG_PATA_ATIIXP=m
    CONFIG_PATA_ATP867X=m
    CONFIG_PATA_CMD64X=m
    CONFIG_PATA_CS5520=m
    CONFIG_PATA_CS5530=m
    CONFIG_PATA_CS5535=m
    CONFIG_PATA_CS5536=m
    CONFIG_PATA_CYPRESS=m
    CONFIG_PATA_EFAR=m
    CONFIG_PATA_HPT366=m
    CONFIG_PATA_HPT37X=m
    CONFIG_PATA_HPT3X2N=m
    CONFIG_PATA_HPT3X3=m
    # CONFIG_PATA_HPT3X3_DMA is not set
    CONFIG_PATA_IT8213=m
    CONFIG_PATA_IT821X=m
    CONFIG_PATA_JMICRON=m
    CONFIG_PATA_MARVELL=m
    CONFIG_PATA_NETCELL=m
    CONFIG_PATA_NINJA32=m
    CONFIG_PATA_NS87415=m
    CONFIG_PATA_OLDPIIX=m
    CONFIG_PATA_OPTIDMA=m
    CONFIG_PATA_PDC2027X=m
    CONFIG_PATA_PDC_OLD=m
    CONFIG_PATA_RADISYS=m
    CONFIG_PATA_RDC=m
    CONFIG_PATA_SC1200=m
    CONFIG_PATA_SCH=m
    CONFIG_PATA_SERVERWORKS=m
    CONFIG_PATA_SIL680=m
    CONFIG_PATA_SIS=m
    CONFIG_PATA_TOSHIBA=m
    CONFIG_PATA_TRIFLEX=m
    CONFIG_PATA_VIA=m
    CONFIG_PATA_WINBOND=m
    # PIO-only SFF controllers
    CONFIG_PATA_CMD640_PCI=m
    CONFIG_PATA_ISAPNP=m
    CONFIG_PAT

    xf86-video-intel?  I tried putting that in /etc/default/grub 
    $ cat /etc/default/grub
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="i915.modeset=1"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    GRUB_HIDDEN_TIMEOUT=0
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    according to the link I need to add it to /etc/mkinitcpio.conf
    I added it and got this error during build::
    ==> ERROR: module not found: `i915.modeset=1'
    so I reverted it back to i915 and I am wondering about the warnings during build
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    ==> Starting build: 3.9.9-1-ARCH
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [autodetect]
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    -> Running build hook: [resume]
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    ==> Image generation successful
    ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    ==> Starting build: 3.9.9-1-ARCH
    -> Running build hook: [base]
    -> Running build hook: [udev]
    -> Running build hook: [modconf]
    -> Running build hook: [block]
    ==> WARNING: Possibly missing firmware for module: aic94xx
    ==> WARNING: Possibly missing firmware for module: bfa
    -> Running build hook: [resume]
    -> Running build hook: [filesystems]
    -> Running build hook: [keyboard]
    -> Running build hook: [fsck]
    ==> Generating module dependencies
    ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    ==> Image generation successful
    Last edited by Areckx (2013-07-10 20:37:39)

  • Laptop screen not getting locked on close lid or resume from suspend

    I am using kde 4.4 rc2 atm. My laptop screen is not getting locked when I closed the lid or when laptop resumes from a suspend to ram.
    It used to work correctly before I installed acpid(before that I just had the acpi client package installed.) Power Devil used to handle everything correctly.
    The power devil settings already says, Lock screen on resume and I have added Lock screen as action for Lid close for performance profile.
    Is there any way to fix this. I want to make laptop screen lock when I do lid close or resume from suspend/hibernate.

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Maybe you are looking for

  • CF8 on Solaris 10 - disk space error

    Trying to install CF8 on a Solaris 10 box (with zones).  The binary installer gives the following error: : root:  /var/tmp> ./Coldfusion-8-sol.bin Preparing to install... WARNING: /tmp does not have enough disk space!                       Attempting

  • How to bring SOA server UP in the console

    Hi Friend In application deployment >resourse Adapters> soa-infra is down how to bring it up In fusion middleware >weblogic Domain >soa_base_domain> i can see only adminserver,bam_server1 only i cannot able to see soa_server1 How to bring my soaserve

  • PC Filling Up

    Well, when I bought my system, a 160GB 10K rpm system drive seemed more than adequate. Hmm. It seems that when I started the day, I had less than 20GB left and I need more than that just to defrag the drive. So, I decided I could live without the Pro

  • Desktop Manager gets stuck during backup.

    Desktop Manager keeps getting stuck during device backup. At the "Messages" backup stage it gets about 80% of the way through then just hangs there. It makes no further progress and thus does not complete a backup. How do I resolve this issue? Deskto

  • Why isn't my card going through on my account?

    Why isn't my card going through on my account? I'm trying to download a free app? what's the deal? why isn't it letting me?