Cannot retrieve playlist

I had to system restore and lost EVERYTHING. I plugged my iPod in to transfer the music onto the computer and pushed the wrong button, wiping my iPod OUT! I cannot figure out how to restore my purchased music back onto iTunes. Any help is greatly appreciated.

Pressing "Erase and Sync" when iTunes brings up the dialogue window asking whether you want to replace the songs on your iPod with the songs in this iTunes does exactly what it says. If you linked to an empty iTunes it will have erased your original iPod song list. There are some data recovery programs on the market. I've no personal experience of them so I can't say how effective they are, here's an example: iPod Data Recovery Buegie - Recovering Songs
None of the recovery programs are particularly cheap so you have to decide if in your particular circumstances it's worth it to get your songs back. It may be if you have a lot of purchased tracks which you will have to pay to download again. If they came primarily from your CDs then it's most likely not as you can re-rip them.

Similar Messages

Cannot delete playlist from Walkman

Hi - Just got a Z1 compact and went to put my micro sd card from my old phone into the sony. Everything is fine except i cannot delete playlists from the My Playlists section of Walkman. The playlists have no content in them, i can't add content to them, and i can't delete them. How do i get rid of them???? Suspect they have to be on the SD somewhere but cannot find them by searching the name or the file type .m3u. Any idea how i find and delete these ghost playlists?? thanks in advance!

Hi, I'd just like you to know that havin already tried EZ File Manager and manual deletion via USB I still couldn't delete certain non-working tracks from the Walkman app, and although I thought your advice seemed potentially dangerous, I tried it as you're a moderator so I trusted it was some 'combination' that was safe. Anyway, long story short I wiped all the media on my phone and SD, of which there was plenty, amassed over a lot of time (the music in particular). If I can't retrieve backups of the music, I'll be very angry with you. (The photos and videos were mostly backed up recently). I don't know if this was some weird, cruel joke for frustrated clueless phone users (not thinking straight late at night, in my case) but if it was, you've caused me to delete everything, and I hope you're happy with yourself. -Feargal

STRUTS - Cannot retrieve definition for form bean null -aaaarrrrgh

Hi Folks,
my head hurts and i become crazy... i know that a lot of people asked this question before, but i did not found any suitable solution.
I have simple a jsp page, containing a form which should be handled by struts. I tried everything, but i did not found my mistake.
Can anyone help me please?
JSP:
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean"%>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html"%>
<%@ page contentType="text/html;charset=windows-1252"%>
<html:html locale="true">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>Anmeldung f?r GOLEM Quickplayout</title>
</head>
<body>
<html:errors/>
<html:form action="checkLogin.do">
<table cellspacing="3" cellpadding="2" border="0" width="100%" align="left">
    <tr>
      <td>
        <bean:message key="prompt.username"/>
      </td>
      <td>
        <html:text property="username"/>
      </td>
    </tr>
    <tr>
      <td>
        <bean:message key="prompt.password"/>
      </td>
      <td>
        <html:text property="password"/>
      </td>
    </tr>
</table>
</html:form>i tryed a lot for the FORM -Tag, for instance:
<html:form action="checkLogin.do"> or
<html:form action="/checkLogin.do"> or
<html:form action="/checkLogin"> but all throws the same exception. :(
struts-config.xml
<form-beans>
    <form-bean name="loginForm" type="de.orb.quick.view.LoginForm"/>
</form-beans>
<action-mappings>
<action path="/login" type="de.orb.quick.view.LoginAction" name="loginForm" input="/login.jsp" scope="session" unknown="true">
    <forward name="success" path="/showData.jsp"/>
</action>
    <action path="/checkLogin" type="de.orb.quick.view.CheckLogonAction" unknown="false" input="/login.jsp">
      <forward name="success" path="/storeRequestData.do"/>
      <forward name="failure" path="/login.do"/>
    </action>
Exception:
javax.servlet.jsp.JspException: Cannot retrieve definition for form bean null
     at org.apache.struts.taglib.html.FormTag.lookup(FormTag.java:831)
     at org.apache.struts.taglib.html.FormTag.doStartTag(FormTag.java:506)
     at _login._jspService(login.jsp:11)     [/login.jsp]
LoginAction:
public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException {
    return mapping.findForward("success");
LoginForm:
public class LoginForm extends ActionForm {
private String password = "";
private String username = "";
public void reset(ActionMapping mapping, HttpServletRequest request) {
    super.reset(mapping, request);
public ActionErrors validate(ActionMapping mapping, HttpServletRequest request) {
    return super.validate(mapping, request);
public String getPassword() {
    return password;
public void setPassword(String password) {
    this.password = password;
public String getUsername() {
    return username;
public void setUsername(String username) {
    this.username = username;
}Sorry for this stupid question, but how can i avoid this exception while using struts TagLibs?
I tried to face the jsp with another action, but this does not change anything.
Thank you in advance
Mirko

javax.servlet.jsp.JspException: Cannot retrieve definition for form bean myfrom
     at org.apache.struts.taglib.html.FormTag.lookup(FormTag.java:831)
     at org.apache.struts.taglib.html.FormTag.doStartTag(FormTag.java:506)
     at jsp_servlet.__index._jspService(__index.java:155)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6291)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:97)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3575)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2573)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:178)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:151)

Cannot retrieve definition for form bean null

Hi,
          I have a page jsp which contains a form. This form contains an action
          towards (page.do ).
          I configured struts-config.xml file in whom I put a configuration of
          action ( type=xxx.pageAction ) but not form because I have not need of
          it.
          During the execution it show that it tries to instantiate a bean of form
          corresponding to a configuration of action and post this error message
          " Root causes of ServletException javax.servlet.jsp. JspException:
          Cannot retrieve definition for form bean null "
          Could you indicate to me where is the problem ?
          Here is my configuration :
          < html:form action = " page.do " method = " post " >
          </html:form >
          <action path="/page"
          type="xxx.pageAction">
          <forward name="show" path="/page.jsp"/>
          </action>
          Thanks in advance
          Rachid.


There's little reason to use Struts infrastructure to set this up since you have no model, and the controller aspect is well-defined (just go to "NewProject"!). You're basically providing a link from one page to another, akin to doing an <a href>, and you wouldn't use Struts to do a simple link :).
I would just just use standard HTML.
If you're okay with using Javascript, this is the simplest:
<input type="button" onClick="document.location='NewProject'">
Or you can use a standard HTML form, as you've basically done already:
<form action="NewProject" method="get">
<input type="submit" value="Create">
</form>

Webi report: Issue Cannot retrieve dimensions from Cube

Hello Experts, We're facing an issue with a partical set of Webi reports in Quality environment. The reports are BW reports based on OLAP BICS connectivity on top of Bex queries.y Below is the scenario and the issue: 1. The backed Bex queries have been trasported to Quality BW system and they're running fine when run from RSRT or Bex analyzer. 2.The Webi reports along with the BICS connections have been migrated to the Quality box and the BICS connections have been editied so that they point to the Quality BOX bex queries and they're testing and responding to the connection successfully. 3. The Webi reports pointed to the Dev Box in the Dev BOBJ system are working fine, but when the same reports for which the connections were repointed in Quality as above, are giving the error "Cannot Retrieve Dimensions from Cube". Steps taken: a. Deleted the reports and the BICS connection from Quality environment and remigrated the reports,connecitons and changed the connecitons but still the issue persists. b.Tried finding the root cause and got the following issue in the Bex query in Quality: There are filters put in the Bex query . All other filters are working fine except 0CALMONTH. We tried putting all sorts of variables on 0CALMONTH, but the moment a variable is put on 0CALMONTH, this issue occurs. But when we tried removing the variable from 0CALMONTH in filters and restricted it to a single value, the Report works fine. However the same is not an issue in the Dev Box and all queries with similar variables are working fine. So we're thinking this might be an issue on the BW backend and the cube might have to be transported again to the Quality Box. ANy quick suggestions or inputs on this would be greatly appreciated. Thanks and regards, Abhishek

Hi Abhishek,
I am facing same issue.Have you resolve this issue?
Regards,
Rajesh

Cannot Retrieve referenced URL in wscript file from Local System Account, but not other accounts on the computer.

Hello,
I have a WScript File that includes an external resource (js file).
It works on one computer and it does not work on another computer.
If I run this file from a normal admin command prompt everything runs fine on both computers.
If I run this file from the Local System account using PsExec it runs fine on one of the computers and throws an error "Cannot Retrieve referenced URL" on the other computer.
The reason I want it to run from the Local System account is that it is executed from a Windows Service.
Is there some setting or some way for the IE cache to get corrupt on the Local System account or something like that?

JRV,
You are by far the worst 'support' person I've ever seen. If you aren't going to be thoughtful in providing support, don't pretend. If you're going to pretend, leave your condescension on the shelf. You have provided no thoughtfulness whatsoever to his issue,
and have in no way improved the discourse. You are arrogant and condescending without exhibiting any intelligence whatsoever. I'm impressed Matt kept calm through your demeaning, counterproductive diatribes.
Matt,
First I'd check UAC settings, because I believe that can change how elevation works substantially.
Second, I would check the versions of wscript.exe on both machines, both in System32 and SysWow, and I'd check for updates bypassing WSUS to make sure there's not something silly going on there (totally a shot in the dark, catch-all theory).
Have you made any headway in the last few weeks?
-John
This is not a support forum and it is not for assistance in fixing broken configurations. It is a scripting forum. The OP proved that the issue is not the script but the environment it is running in. You should not get mad just because you are
not getting satisfaction.
¯\_(ツ)_/¯

HT1386 The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

The laptop I originally synch'd my iphone 4s with is broken and cannot retrieve any files. How can I sync the phone with a new laptop without losing all my downloaded music and apps already installed on my iphone?

If the answer to the above question is "yes", FIRST, set up a backup of your new computer before you do anything else so the next time your computer breaks you will not be in the same situation. Backup solutions are numerous and inexpensive, and there is absolutely no excuse in the Third Millennium not to have one.
Then see this tip: https://discussions.apple.com/docs/DOC-3141

Cannot retrieve photos from external hard drive

I had to upgrade my OS so that i could download the newest version of adobe photoshop. this upgrade also upgraded my iPhoto and erasing all photos. I do have photos backed up on external hard drive but cannot retrieve photos from the external hard drive.

this upgrade also upgraded my iPhoto and erasing all photos.
No update to the OS upgrade iPhoto too. So something else is going on there.
There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

HT1151 Cannot retrieve file after I forgot to properly eject the USB it was on--what can I do to get this file to open?

Cannot retrieve file after I forgot to properly eject the USB it was on--what can I do to get this file to open? Thanks for helping me out b/c it would take days to re-create this file! IMAC 10.5.8 Excel File using .xls extension.

Hi Sue,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Try a Repair on the External USB Drive.
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

I was given a replacement and told to set it up on itunes but now I cannot retrieve my address book, can anyone help please?

a message appears saying that there is a problem with the windows installer.
What's the precise text of the message please? (There's a few different ones I can think of that you might be getting.)

User cannot retrieve data in app on local PC

A certain user cannot retrieve data in one application whilst being able to send data in that application. She can access the 'Finance' application, send data in that application and retrieve data but in another application, 'ICM', she cannot retrieve data whilst being able to send data in that application. The weird thing is that she can retrieve data on another PC in the same application (same ID). This means the problem of retrieving data only exists on that specific computer.
As the problem only exists on that PC I did the following:
- clear local application data (via eTools in BPC for Excel)
- make sure the BPC client on that PC works => all show OK in BPC Client Log.txt (after diagnostics)
But still no results so...
Any suggestions...anyone?

Hi,
Can you try to clear "Local application information". Its in ETools--> Client Option.
then login using connection Wizard.
Hope it helps
Raman

Upgraded to larger HD cannot retrieve from earlier backups on Time Capsule... help!

Hi I Took out my small, original HD and upgraded to larger HD. Cloned my computer and reistalled it onto the new HD. Now, I cannot retrieve from earlier backups from older HD. I can see the data in pink on right, but it refuses to go past the day of new HD installation. How can I get there from here? Thanks...

If you cloned the disk you should have all the existing files on the original disk.
The new disk is seen as a different computer..
See stuff in pondini about accessing time machine from another Mac.. as that is effectively what you are doing.
http://pondini.org/TM/FAQ.html
Look at Q17.. but all the questions, 14-18 are relevant.

I cannot drag playlists to my iphone

i cannot drag playlists to my iphone from my itunes folder on my mac

In Tunes with your iPhone connected and selected, on Summary page check Manually manage music and videos.

After upgrading iTunes software, I cannot import playlists

After upgrading iTunes software, I cannot import playlists. Help!

To be more clear:
1. My music and my playlists are on an external drive. My playlists are saved as .m3u files.
2. Everything was working perfectly before the iTunes upgrade yesterday. But now when I use the iTunes "File/Library/Import Playlist" feature, the playlist that is imported is EMPTY.
3. I can open the .m3u file and see that it contains the songs with their full path. So the .m3u file contains the correct information, it is just not importing into iTunes like it used to.
4. Apparenty when iTunes upgraded, it changed some setting and now everything is out of sync.
I am so stumped.

Query - Cannot Retrieve the Data / Result Set

Hello,
I'm trying to query a cube through the OLAP connection using Java and every time I try to execute a query an exception is thrown stating "Cannot retrieve the data set" or "Cannot retrieve the result set" depending on how I'm doing the query. I've tried to execute the query both through the use of an IBIQuery and IBICommandProcessor object as well as directly through the IBIOlap connection via an MDX statement and both methods produce the same exception. If anyone can shed some light on why exception is being thrown it would be greatly appreciated.

please help me ... The question has nothing to do with 'getting' data from excel and certainly not with putting it into MySQL.
The stack trace specifically tells you that your connection string is wrong.
It also tells you which connection string is wrong.
Which you can use to determine specifically which one is wrong. And which you did not provide that info to us.

Cannot retrieve playlist

Similar Messages

Maybe you are looking for