Cannot reverse GR. Error: "Document flow for delivery cannot be updated"
An STO has GI, GR and invoice verification. However, it appears the delivery was deleted such that when trying to reverse the GR, there is an error: "Document flow for delivery not be updated".
According to OSS Note 1499411, solution is:
Change your process so that the goods receipt (in stock transport order scenarios with replenishment deliveries) is always posted with reference to the replenishment delivery and never with reference to the purchase order.
If this is not possible and you have to work with the restrictions of a goods receipt with reference to the purchase order instead of the replenishment delivery, implement the attached corrections to be able to correctly post the GR reversal with reference to the stock transport order.
However, it does not say anything on how the GR of the existing STO will be reversed.
How will i reverse the GR in this case?
Thanks!
Best Regards,
Armie
Unfortunately, when I use MB0A and I input the delivery number under Find POs for Preceeding Document, it errors out as well as the delivery does not exist.
Any other option to reverse the GR?
Similar Messages
-
Return to vendor Error - Document flow for delivery cannot be updated
Hi Expert,
we have a issue - can't post "return to vedor" by MIGO.
The steps are following:
1. It is an STO between 2 plant within different company code;
But the planner wrongly set this STO as CONFIRMATION KEY REQUIRED.
2. The issuing plant didn't create the outbound delivery for this STO. And at the same time, the receiving plant directly post the Good Receipt for this STO by creating an inbound delivery.
3. Then we found this error, we decided to reverse this Good receipt, and then ask the issuing plant to open an outbound delivery, and the receiving plant post good receipt for the outbound delivery.
We met error when we tried to use 122 - return to vendor:
Document flow for delivery cannot be updated
Message no. M7352
Diagnosis
Purchase order 753486 is assigned to a delivery. The current transaction cannot update the document flow for this delivery, because the system does not recognize the delivery number.
System response
When you post this goods movement, the document flow is not updated in the delivery. This can lead to problems later on when you process the delivery.
Procedure
You can post the goods movement using transactions MB0A or MIGO (Goods receipt for a delivery) after you enter the delivery number.
If you are currently posting a cancellation, a return delivery, or a subsequent delivery for the material document, it is not possible to enter the delivery number.
Procedure for System Administration
See SAP note 361014: Message M7 352: What does it mean?
Please advice,
Thanks,Unfortunately, when I use MB0A and I input the delivery number under Find POs for Preceeding Document, it errors out as well as the delivery does not exist.
Any other option to reverse the GR? -
Document flow for delivery cannot be updated !
Hi,
When i try to cancel a GR (GR upon an aoutbound delivery) with MIGO i had this error message :
"Document flow for delivery cannot be updated"
Please how to solve that ?
RegardsThanks,
in MIGO i try to reverse the matrial document of my GR
if it is not correct what must i choose in migo ? because when i choose cancellation, "Material document" is the only choice suggested by the system !
Please help. -
Document flow for delivery can not be updated
Hi all,
I received goods for a PO and the PO has a subsequent OBD created. When I tried to reverse the GR I got the following error- document flow for delivery can not be updated
Can you help me understanding why this error occured?
Thanks,
RanaHi Rana,
In ECC 6.0 both ways you can do the goods moments (WRto PO/ Delivery) provided "Document flow update" check box checked in Logistics Execution-Shipping-Basic Shipping Functions-Configure Global Shipping Data
Please confirm
Nagesh -
Error when creating document flow for delivery
Hi,
I would like to post the GR for Inbound delivery. I receive an error the TO is not confirmed. I have tried to confirm the tranfer order and I receive the "error when creating document flow for delivery . In order to avoid inconsistencies the goods movement posting was cancelled." It seems like the document already exist.
How can I do to confirm the TO and post the GR.
Thanks
DedeIn Inbound delivery after GR only a TO is created and confirmed.
So please check the PO history and see a GR is there or not .
Once a GR is found create a TO and do the confirmation -
Hello all:
When attempting to PGI an inbound delivery (via VL06I - For Goods receipt - select inbound delivery - click Post Goods Receipt) I received error messgae VL 659:
Diagnosis
As the system was recording the document flow for the goods movement, it determined that the subsequent document number is either blank or identical to the number of the preceding document.
System response
In order to avoid inconsistencies, the goods movement posting was cancelled.
All WMS transfer orders tied to this inbound delivery are complete. This hasn't happened with any other delivery. Any suggestions as to what I can do?
Thanks,
BillHi,
I would suggest you to go trough OSS notes using the error message number as search key (e.g. 352243, 645119, 197864).
If you fail to find any maybe it would be worth of contacting SAP AG.
Regards,
Csaba -
Error: Document is incomplete: You cannot save the delivery
During MB1B, mov type 343 in decentralized environment getting error "Document is incomplete: You cannot save the delivery"
Sharing screens from ERP Customization mov 343
In warehouse mov 343
Entries are maintained for mov 343 -
Document flow for a delivery created w/o reference_?????
Hi all,
Iam looking for a way to, trace the document flow for an delivery created w/o reference to a PO.(<b>tcode: vl01no</b>)
Is there any FM to do this. can you be more detailed.
Regards,
Ravi.
Message was edited by: RAVIKIRAN ReddyHi james,
when you run the FM with the delivery and client entries,
It gives back the delivery details but it does not give any details regarding the Doc. num,PO num etc.
The entries in VBFA_TAB doesnot show any such details.
I want all those to be displayed during document flow.
please, let me know how to proceed.
Thanks in advance. -
Missing document flow for STO proc. delivery
Hi Experts,
I have problem with missing document flow for STO proc. delivery. I debugged VL10 and BADI (IF_EX_LE_SHP_DELIVERY_PROC~SAVE_DOCUMENT_PREPARE), I found that document flow parameters (CT_XVBFA) for this BADI interface is empty.
Any comments or solution.
Thanks,
SASD functional are satisfied with configuration.
Please advise.
Thanks,
SA -
Report for listing all document flow for SD
Hi expert,
do you know any report from SAP or you have any sample report that can display and show all document flow for SD in one line...
let say in selection screen i have contract number... so when i key in by contract number all detail and flow will display e.g
conract 2000001 service order 3000000 delivery 4000000 invoice 5000000
thanks.
[SAP Notes & Tips|http://abap4beginner.blogspot.com/]hi,
thanks for the solutions. Did others have experience on this situation?
Thanks.
[Abap Notes & Tips|http://www.abap4beginner.blogspot.com/] -
Document flow for historical CS orders
Hello,
Document flow is not working for historical orders (archived orders) anymore. Instead, Document Relationship Browser (DRB) can be used.
However, SD billing documents related to CS orders are not shown in DRB as they are shown in normal document flow for online orders.
Does anybody know the way to get also billing documents to DRB for CS orders?
Best Regards, JVHi JV,
Welcome.
Please check the below links...
http://help.sap.com/saphelp_dimp50/helpdata/EN/ed/5f2602fba9434db4eb2e883448457e/content.htm
http://csc-studentweb.lrc.edu/swp/Berg/Conferences/SAP_Project_Management_2007/Global_SAP_Environments/pdf/Track6_session7.pdf
thanks
sekhar -
Table Name to see the Document Flow for Service Order - T. Code IW33?
Hi,
can u advise the Table Name to see the Document Flow for Service Order - T. Code IW33?
Ravi.Hi,
From SERVICE ORDER you cant get the INVOCIE NUMBER,
You will get the SALES ORDER number for that Service order in QMEL table and fetch the Sales order and then goto VBFA to get the Invoice number for the sales order with the DOCUMENT CATEGORY M.
hope it will serve you.
thanks,
santosh -
QM-Notification: document flow for Customer Return Order
Hi Experts,
I changed actionbox and made an FM to create a Customer Return Order (SD). It works.
And now I need the document flow in this QM-Notification, I try it with FM QMLR_CREATE_DOCUMENT_FLOW,
but I dont know, where to customize the Object-Types, QM-Notification is BUS2078 and Customer Return Order is BUS2102.
In which transaction or dialog or where do I have to say the system, that I want the document flow for this combination?
Thanks for Your help.
Bernhardyou have to put that logic in the FM. You can do it in the FM which is creating the return order or copy the FM - QMLR_CREATE_DOCUMENT_FLOW as custom FM and change the object to BUS2078.
Thanks,
Ram -
Reg : document flow for SD and MM ?
hi everybody,
i want to know the document flow for SD and MM.
please any guide me.
my id: [email protected]http://www.sap-img.com/sap-download/sap-tables.zip
You can check the links..
http://academic.uofs.edu/faculty/gramborw/sap/sapguide.htm
http://www.sap-basis-abap.com/sapfiar.htm
http://www.thespot4sap.com/IntroTo/SAP_FI_Module_Introduction.asp
http://www.thespot4sap.com/IntroTo/SAP_CO_Module_Introduction.asp
http://www.sap-basis-abap.com/sapco.htm
http://help.sap.com/saphelp_40b/helpdata/en/e1/8e51341a06084de10000009b38f83b/applet.htm
http://www.sapgenie.com/sapfunc/fi.htm
http://www.sap-basis-abap.com/sapfi.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
here r the links for MM
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf -
FM: Document flow for a sales order
Hi,
is there any FM, BAPI, CL to get the whole document flow for
a given sales order.
thanks.
regards, DieterHi,
look for example to BAPI_SALESORDER_GETLIST
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
Please check table VBFA. It contains all the information about document flow in SD.
Check the example program below, it is not a function call, it is a dialog call.
(Or)
report zrich_0001.
data: xvbco6 type vbco6.
data: xvbak type vbak.
parameters: p_vbeln type vbak-vbeln.
clear xvbco6. clear xvbak.
select single * from vbak into xvbak
where vbeln = p_vbeln.
move-corresponding xvbak to xvbco6.
call dialog 'RV_DOCUMENT_FLOW'
exporting
vbco6 from xvbco6
ivkorg from xvbak-vkorg
ivtweg from xvbak-vtweg.
Regards
Maybe you are looking for
-
When I get an email on my iPhone and delete it, it still shows up on my MacBookPro inbox-which I want it to do. When I delete an email in my inbox on my iPad it disappears everywhere- it's not on my MacBookPro inbox nor trash, it's nowhere to be foun
-
After upgrading to mavericks i cannot log into my VPN using RDC
After upgrading to mavericks i cannot log into my desktop at work using Remote Desktop Connection for Mac I get a message that The computer i am triyng to connect to cannot establish my identity What to do?
-
Hi It always worked, till now. If I sell a Apple notebook because I bought a new one, I make a clone with CCC and with Command-R or Choose Startup disk I say to the new machine: now eat this, here's my old stuff. It's a great way of upgrading to a ne
-
CVP call studio and default audio
Not sure if this should get posted here or on the development forum but it's getting posted here anyways... We have 4 combo boxes in our CVP deployment so we have 4 media servers. I'm trying to figure out what to configure for the Default Audio Path
-
BAPI or BDC Program For pricing VK11
Hi All, Is there any standard program for pricing VK11 using batch input or send me some coding on Bapi or BDC. Thanks in Advance. Arun. Edited by: Arun Kumaran on Dec 24, 2009 11:40 AM