Cannot rip a cd with internal drive while burning disc with external drive

Does anyone know why I cannot access any disc with my internal superdrive while Toast Titanium 11 is burning a blu-ray movie on my external drive?
Drive that is being used to burn externally is a LG WH10LS30 model

Pretty simple. You just can't do that.

Similar Messages

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • Cannot install Mountain Lion as the installer provides message that my target drive is using Time Machine. My target drive is my internal drive and I use an external drive for Time Machine. When I check the Time Macine set up under system prefereces it sh

    Cannot install Mountain Lion as installer sys the target drive I have selected is using Time Machine. The target drive I selected is my internal drive. I have an external drive that I use for Time Machine backup. When I go to System Preferences and look at the Time Machine set up it shows my target disk is the external drive. What to do?

    Yes, you’ll be able to do that.
    (116841)

  • Using Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".

    I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
    Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!

    I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
    Could be you have the wrong cd/dvd.  The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
    When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
    Not sure.  Could be your machine does not support the startup manager. You would think the machine would ignore the key.
    Where did you get the dvd?  What is the number on the DVD?
    What machine do you have anyway?
    This site provides more information, but lacks security.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • Deadlock with thread issues while generating reports with Crystal Report XI

    We are facing deadlock with thread issues while generating report with Crystal Report XI
    Version Number is 11.0 and the database used is Oracle
    In the log file on line number 74350  by 2008/12/16 13:35:54 there is a dead lock with Thread: u20184u2019 is waiting to acquire lock for 'com.crystaldecisions.reports.queryengine.av@15214b9' which is held by the Thread: '0'.
    And  a dead lock with Thread: u20180u2019 is waiting to acquire lock for 'com.crystaldecisions.reports.queryengine.av@15214b9' which is held by the Thread: '4'.
    Exactly after 10 minutes we can see the thread 4 and 0 are declared as STUCK by 2008/12/16  13:45:54 .
    Is this an existing issue with Crystal Report?
    Is there some solution for this problem?
    THE LOG FILE INFORMATION IS GIVEN BELOW
    [deadlocked thread] [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)':
    Thread '[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'' is waiting to acquire lock 'com.crystaldecisions.reports.queryengine.av@15214b9' that is held by thread '[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)''
    Stack trace:
         com.crystaldecisions.reports.queryengine.av.V(Unknown Source)
         com.crystaldecisions.reports.queryengine.av.do(Unknown Source)
         com.crystaldecisions.reports.queryengine.as.if(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.datainterface.j.c(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source)
         com.crystaldecisions.reports.common.ab.a(Unknown Source)
         com.crystaldecisions.reports.common.ab.if(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
         com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source)
         com.crystaldecisions.reports.reportengineinterface.a.a.b.a(Unknown Source)
         com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
         com.sysarris.aris.crystalreports.RepServlet.generateReport(RepServlet.java:65)
         com.sysarris.aris.crystalreports.RepServlet.doPost(RepServlet.java:40)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
         weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
         weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
         weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
         weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
         weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
         weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
         weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
         weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    [deadlocked thread] [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)':
    Thread '[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'' is waiting to acquire lock 'com.crystaldecisions.reports.queryengine.av@12e0415' that is held by thread '[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)''
    Stack trace:
         com.crystaldecisions.reports.queryengine.av.V(Unknown Source)
         com.crystaldecisions.reports.queryengine.av.do(Unknown Source)
         com.crystaldecisions.reports.queryengine.as.if(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.datainterface.j.c(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source)
         com.crystaldecisions.reports.common.ab.a(Unknown Source)
         com.crystaldecisions.reports.common.ab.if(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source)
         com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
         com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source)
         com.crystaldecisions.reports.reportengineinterface.a.a.b.a(Unknown Source)
         com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
         com.sysarris.aris.crystalreports.RepServlet.generateReport(RepServlet.java:65)
         com.sysarris.aris.crystalreports.RepServlet.doPost(RepServlet.java:40)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
         weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
         weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
         weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
         weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
         weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
         weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
         weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
         weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    Can you please suggest any work around for this?

    I'm not referring to Servlet threading issues.
    I'll clarify.
    You have two threads, both entering ReportClientDocument.open(...) method.
    Thread 4 is waiting to acquire 'com.crystaldecisions.reports.queryengine.av@15214b9'
    Thread 0 is waiting to acquire ''com.crystaldecisions.reports.queryengine.av@12e0415'
    So I'm thinking ??? are they the same objects?
    My specific question concerning the ReportClientDocument is that both are calling open - i.e., trying to open a new report.  You wouldn't be trying to open different reports using the same ReportClientDocument - so was wondering if you've cached the RCD and trying to open two different reports at the same time on the same instance via different threads.
    You'd normally tie a ReportClientDocument instance to a HTTP Session, to ensure each user gets their own copy.
    Sincerely,
    Ted Ueda

  • Which CD and DVD drives are burn compatible with 7.02.16

    Upgraded to this version and now my DVD RW drive cannot burn CDs anymore from iTunes. Worked fine with previous versions.
    Which CD and DVD drives are burn compatible with 7.02.16? I want to get an USB external drive that I know Apple supports and will support with iTues.

    Upgraded to this version and now my DVD RW drive cannot burn CDs anymore from iTunes.
    are you getting an error message? if so, what does it say?
    could you also post your DVD/CD diagnostics for us? in itunes, go "help > run diagnostics", select DVD/CD diagnostics, and paste the complete results into a reply.

  • I lost all personal data while installing maverick in external drive. How can I recover lost data?

    I lost all personal data while installing maverick in external drive. How can I recover lost data?

    If all your files are missing
    You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.   
    If files are missing from one folder
    Change the Finder view mode; for example, from icon view to list view, or vice versa.

  • Am I better leaving my music on the imac drive or putting on thunderbolt external drive?

    My current set-up is that I have a 6 year old imac.   I also have an external hard drive where I moved all of my itunes content (about 400gb of movies, music, etc.) and I also moved our iphoto files to this external hard drive.  This drive is connected by ethernet in our house and it feeds the apple TV that is in another room (wifi connected).
    I just ordered the new imac retina (has yet to arrive) and I upgraded to the 1TB flash drive.  I also ordered a thunderbolt external drive.  My question is this...I believe a Flash drive is fast.  I believe a Thunderbolt drive is fast.  For accessing the content especially for Apple TV, is it actually better to leave the content on the imac going forward rather than a hard drive?
    I had the external drive to free up hard drive space and to make it easier to move to a new mac when the time came.   I had also hoped to find a way for apple tv to access the content even when the imac was turned off but I haven't been able to make that happen.
    So, just asking here about leaving content on the new imac when it comes versus moving the data over to the thunderbolt drive.
    Being that the apple tv will still be accessing content via wifi in the house, I wonder if I will see any speed improvements in streaming with the combo of a faster mac, faster thunderbolt, etc.
    Hopefully upgrading to the flash drive was a smart decision in general.
    Thanks.

    Streaming will be faster from the new iMac.  However it is still a good idea to keep the bulk of your material, 400 GB is a lot of content, on external drives.  That serves to protect the material if an internal drive fails, and also keeps the internal drive from getting too loaded down.  You can increase speed by simply moving content you want to use in the short term to the iMac SSD where it will be at its fastest speed, and then take it off when no longer needed there.
    That gives the speed and security for your material.

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • HT4236 I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. No dice. Help!

    I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto. I want to sync both from my ext drive and new albums in iPhoto. My photos on the devices get wiped out when I sync to iPhoto since I deleted all the albums. But when I sync to my hard drive (where I maintained the album structure) the photos are copied to my iPad but lose all the hierarchy and folder structure. Now I have to scroll through thousands of photos to try to find the one I'm looking for. Before I sync any more devices I want to know the following: 1) can I restore the album structure on my iPad by using the photo cache? 2) is there a way to sync both new iPhoto albums AND pictures in the folders in my hard drive? And 3) how can I keep the photo hierarchy structure from my hard drive intact on my devices?

    TigerMom28 wrote:
    I've run out of room on my hard drive. I bought an external drive and exported all my albums to the external drive then deleted the albums from iPhoto.
    Don't do that.
    Copy /Photos/Photo library/ to the external.
    Hold Option and launch iPhoto.
    Select Choose library and select the Photo library you copied to the external.

  • How do I format a Time Capsule (3TB) drive for serving as an external drive while replacing its TC function with a Seagate 4TB drive yet keeping the Apple TC's wifi functionality?

    I have a hard line from my iMac to an Apple Time  3 TB Time Capsule with wifi. I wish to replace the drive potion of the Time Capsule with a new Seagate 4TB drive

    Aside from changing the type of data you put on the Time Capsule, leave its drive as is. Its format is fixed.
    (119920)

  • I have a 2009 MacBook Pro. How do I do a backup on the new internal hard drive using my existing LaCie external drive without re backing up the entire internal drive. Just want to backup most recent changes

    I have a mid 2009 15" MacBook Pro. The existing internal drive was about to fail so I had it replaced with a 500GB western digital drive. I have been backing up my system with a LaCie 500GB external drive. I want to perform a new backup using Time Machine but I only want to backup any changes from the last 30 days or so. I want to avoid doing a total system backup thus duplicating most of the data on my external drive and pretty much filling it up. Any suggestions appreciated

    Look at this web site devoted to Time Machine:
    http://pondini.org/OSX/Home.html
    I suspect that this portion will address your situation:
    http://pondini.org/TM/15.html
    Ciao.

  • Internal drive installed in as as external drive in an enclosure problems

    I removed my internal hard drive from my graphite iMac, encased it in an Adaptec USB 2 hard drive enclosure, plugged it in, restarted my computer (already with a new internal hard drive with Tiger MacOS working) but could not see the icon of the new external hard drive on the screen. The external drive is set to be a slave. Whart have I done wrong? The disc utility won't recognize its presence either. I would appreciate help.
    Ella from Indianapolis

    Ella Hurrell...
    "I mean that the only ocon missing from the sedktop is the wone for the external hard drive...everything else is as it should be."
    Now you are confusing me a bit here. It works otherwise but it doesn't show up on the Desktop <OR> nothing works?
    The Desktop Icon setting is a Finders Preference, so does CDs show up on the Desktop?
    At first, I thought it needed the Hard Drive checked till I mounted my USB drive. I can check and uncheck "CD,DVD, and iPod" and it will show and disappear accordingly. (so long as Apple did not change this from our Mac OS 10 versions)
    Now if nothing is working beyond this point, something went bad, if everything is properly connected.
    ...Ron

  • Is there a way to export all of my music from my hard drive to an external drive, connected to my computer and have iTunes still work with the music library located on the external drive?

    I do not have enough room on my hard drive for all of my music collection and want to export the music files to my external 300GB hard drive rather than purchase and configure a new, larger hard drive for my computer.  Can I export all of my music library to the external drive and configure iTunes to always store music there, and operate seemlessly with the music library on the external drive?

    http://www.wideanglesoftware.com/touchcopy/index.php

  • How do I move my Outlook emails, currently viewed on Mozilla Firefox v26, to an external hard drive while I format my C drive?

    I am using Windows 7 Ultimate 32 bit version. I have been viewing my Outlook email and contacts via Mozilla Firefox v26. However I have got to format my C drive to get rid of a malfunction. How do I move my emails and my contacts from the C drive to an external drive? I need to do this so as not to lose all my email information. I would then want to restore it to Mozilla Firefox 26 after I have formatted the C drive and reloaded Firefox? I would very grateful for any detailed information about how I go about this!
    Nick Bannister

    Firefox doesn't store your email or contacts, it displays that data from the webmail server that you connect to with Firefox.

Maybe you are looking for