Cannot rollback to my previous bios. Please Help
I have an MSI 845PE MAX2 mainboard with 6704 chip and bios version 1.2
I have recently made an attempt to upgrade to 3.06 GHz hyperthreading cpu.
Unfortunatelly the board did not recognize the cpu so I tried to upgrade my bios
to 1.3b version which I found somewhere in the Internet. The problem still remains
and I also get a cmos error every time I boot. I tried to rollback to my
previous recovery bios version 1.2 , but it cannot be done because I cannot disable the Bios flash protection feature of the board. I do choose disable, then I choose save and exit and the computer freezes. When I try to cold reboot the system and enter the bios again the Bios flash protection feature is enable again. It seems like I cannot save into the flash rom. I have also used the jumper on the board to erase cmos but nothing. Do you have any ideas what to do? Do you thing I destroyed the board?
thanks
Hi
May I know if you can go pass the POST screen where your computer searches for Bootable Dvices? If so, I will recommand you to get the BIOS for your board from MSI's website and flash it back to BIOS Version 1.2- PCB without 2.0: http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=366&kind=1
I also saw that the current version of BIOS that you are using is denoted by a letter "b" at the end, which in most cases, are beta BIOS which is for engineering use and I personally DO NOT recommand them unless you have problems that are unsolved by the current revision of the BIOS. (This applies especially for BIOS files which are not obtained originally from MSI's website.)
If you do not know how to do a proper flashing of the BIOS, please read the "How to flash BIOS" in the BIOS file. If you want the board to recognise HT, you got to go to the BIOS menu and then advanced chipset setting. Then make sure that MPS Version is at 1.4 and the option Hyper-Threading is enabled. This setting is available on MSI 865PE Neo 2 board and I think it applies to 845PE too.
Cheers
Adrian, MSI Board User
Similar Messages
-
Cannot sign in to iTunes? Please help.
Cannot sign in to iTunes? Please help.
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
Hi All. I am new to this forum but hoping I can find some answers from some of you apple guru's out there. I have downloaded a mvie onto my iphone (which took forevere but I cannot find it to view it.Please help
It should be in the Videos App - if it's not in there then have you got a film age rating set in Settings > General > Resttrictions that is hiding it ?
-
i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.
In iTunes, Advanced>Create iPod or iPhone version
-
im getting problem in imovie & iphoto update.my 1st id is blocked,i changed my id but during update it is showing my previous id.please help me how should i update my app with my new id.
Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.
-
Indesign CC (2014) on MacPro (2014) Yosemite, Pages thumbnails slow to render, was fine on previous OS, please help?!
You now know that you should never uninstall old until you are sure new works
Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous -
omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo
It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
Thank you for your answer
Majo -
HT1420 i have less than 5 authorised computers. yet cannot authorise my new iMAC27. Please help..
i have less than 5 authorised computers. yet cannot authorise my new iMAC27. Please help..
Hello Morfaly,
Thanks for the question. The following article may provide a solution to your issue:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M. -
I have been working on installing this software for weeks now and am at the end. The first time the organizer installed but the editor wouldn't. I have uninstalled and reinstalled multiple times and am ready to take this application back to the store. I have a Vista machine.
It still didn't work. I paid for Photoshop 12 at Costco. The organizer downloaded just fine but when I tried to use the editor, the screen appeared asking for my Adobe sign on, I signed on, and then the application just churned. I had to use task manager to stop it. Per your instruction, I downloaded Photoshop 13 from the site, it downloaded fine and then asked for my Adobe sign on and then just churned. I can now access Photoshop 13 organizer but still can't get editor.
This is ridiculous. Last night I did the msconfig.exe and followed the instructions on changing the start up menu and disabling everything.
I am furious about this. It looks like you want me to pay for Photoshop Elements 13 when I can't get 12 to work. This is a Vista machine.
Elena Wright
Rajshree <[email protected]> wrote:
Rajshree created the discussion
"cannot install my costco photoshop 12 please help. it is now installing itself. Will take it back tomorrow."
To view the discussion, visit: https://forums.adobe.com/message/6870350#6870350
> -
when i try to access itunes store..i get a message saying 'cannot connect to itunes store..PLEASE HELP!!!
Hello Ducati848,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario -
I have tried to update my iPhone 4 many times (from iOS 5.1 to latest version), but everytime it fails and says that it cannot be updated. unknown error (3194). please help.
<E-mail Edited by Host>You might try reading the entire help document you linked from:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
I just exchanged a faulty iPhone 4 for a new one, when I got home to restore it, iCloud says "cannot restore backup". Can somebody please help provide much needed advice? Thanks in advance!
Yep, that's the only message that popped out. Nothing else. Yes, it's running on the latest ios and I still can't restore it. I called apple and they told me it's probably something wrong with their servers. Anyway thanks for the advice.
-
After i Updated itunes al my ipod apps including safari and music, photos and all of them went away and i cannot do anything on it anymore please help?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Can you find the apps using the Spotlight search on the iPod? Maybe you just can't find them
- If you can find them you can reset the screen layout by go to Settings>Genera.Reset>?Reset Screen Layout.
- Restore from backup
- Restore to factory settings/new iPod. -
I got an order number not a serial number! I cannot install my product Adobe Muse please help!
i bought adobe muse because my trial expired and i really need the program, i got an order number not a serial number! I cannot install my producto Adobe Muse please help! i have been more than 5 hours trying! im tired!
Hi,
Please check this thread,
i need my serial number
If nothing works, please reach out to the support team, using the following link ,
Contact Customer Care -
I cannot install, only hard drive test. please help!
hi,
my iBook G4 crashed about 2 months ago and I got a new harddrive but it came with no operating system. I borrowed a friend's disks but everytime I put in disk 1 it will only go to Hard Drive Test and I cannot make it go to a section where I can actually reinstall. I have tried pressing command, c, command and c, and nothing. every time it goes to the Hard Drive Test and I have already run it and I passed.
the girl with the disks also has an iBook G4 and I do not understand what the problem is. she just bought it after I did.
I bought my laptop in the US but I am currently in Denmark and could not get Apple to actually fix my laptop but there should be no problem.
please help!heychristaay,
As I asked in My Previous Reply;
"What OS was installed on your iBook before you replaced the HD?
Have you tried installing, using either the disks that shipped with the iBook, or a Full Retail Version of an OS, that you may have upgraded to? Your own disks?'
If the borrowed disks, do not look Exactly like THESE, they will not work to install Panther 10.3.x.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
ali b
Maybe you are looking for
-
How to pull and display the document from an external storage medium?
HI, We are having one external storage medium for SAP documents. In our case it is filenet server. My concern is . How can we pull the doc from the filenet server (external storage medium)?. I am in need, how and what an abap development team needs t
-
How to send php email using email from recordset?
Hi I know the headers to use for php mail(), and I use it for the contact form for my viewers in order to contact the directory listing's email address ( of which I have hidden by using the words 'Email Us' and use the id to carry through to the form
-
Error message during replacement of the account symbol - Bank statements
Hello all, Even though I have completed the customizing and tested some bank statements, there are some bank transactions that aren't being posted. The error message is: ++Account symbol TRANSFER.RECIB. cannot be replaced (modif. + )+ +Message no. F8
-
PI 7.31 Dual Stack Using BPM/BRM and ccBPM
Hello, My client has decided to use SAP PI 7.31, because we have many ccBPM solutions, being used a long time, the idea is install the Dual Stack solution and keep using the ccBPM, at least for while. But for the new integration solutions, we would l
-
How to set "lastFieldsOptional" in File Adapter
Hy, somebody could tell me how can set the parameter "lastFieldsOptional" in FilesAdapter. have the problem that my last two fileds in incoming files sometimes are not insert and the "endlines" character also insert. Thank's Mati