Cannot run canon lide toolbox installer

My Canon Lide 60 needs to have the Canon Svanner Toolbox to be installed. When I try to open that file 'CnaoScanToolbox4.3.9.4' I get the message 'App can not be opened as it does not come from a verified developer' and 'Because of security measures only Apps from App-Store verified developers are allowed'
What the **** is this? Appel does not know official Canon SW-developers? Who can help.....
THX
Erhart

Go to System Preferences (under the Apple menu) and select Security & Privacy. Select the General tab. Click on the lock in the lower left hand corner and authenticate. Under Allow applications downloaded from: select Anywhere.
This is a security feature. I strongly suggest that after you finish installing the software that you change this back to the way it was.
Best of luck.

Similar Messages

"HP Solution Center cannot run because your device installation is not complete"

I cannot use HP Solution Center because I only get this message when I start it: "HP Solution Center cannot run because your device installation is not complete". I am running Windows XP with an HP PhotoSmart Premium. I can print just fine and the printer is recognized by the PC and the network. I get the same problem whether connected wirelessly or through USB. I have re-installed all software multiple times. Please advise on how to get Solution Center up and running.

I had to do a total uninstall and reinstall of the driver. However, as you will see from this and other Support Forum threads there seem to be multiple stumbling blocks to the uninstall/reinstall process. Seems very glitchy. After nearly two days of unsuccessful tries I finally got it done. I did find three different official HP scenarios for the process, including one automatically sent to my desktop by HP upon one of the earlier failures. That sequence did not work work for me, but it was close--I got a partial install. But on another HP help file titled "Product Software Installation stalls or stops in Windows 7 with a USB connected product HP..." I found a six step process (with details for each), and it worked for me on the second try. Here are the six steps, plus extra things I did or discovered that could have helped make it work. I did step 5b. first: downloading and saving the HP driver file on my computer before starting other steps, since I elected not be be on the internet as I did the installation. 1. Uninstall the HP printer software. See my note below about four ways HP lists do to this. I used two of them.2. Turn off the 'terminate and stay resident programs (has to do with system configuration). See HP details.3. Clear temporary files and folders through Windows accessories.4. Disable firewalls (see my note below about this)5a. Disconned the cable from BOTH the printer itself and from the computer, BUT TURN ON the printer.5b. Get the lastest version driver for you printer from the HP site and save it where you can find it. (I did this first, before other steps, so I could install off-line)5c. Install the driver software that you saved. (see my note below about an optional step that helped me with this, so the install will complete, and not hang up)6. Enable the start up software that was turned off with step 2. (See HP details) Notes: there are versions of HP instructions that skip steps 2 and 6 and or 3 and 4, but that would not work in my case. I describe the steps that finally worked in case they can help someone else--this has been so frustrating. This uninstall/install process seems to be very touchy and perhaps changes depending on your printer or other configuration of your computer: Note about step 1: I found an HP document that listed four ways to uninstall. On my final and successful attempt I actually used two of the techniques. First I used the HP uninstaller program from the start menu program list on my computer stored with other HP stuff there. When I rebooted it did not appear that any HP programs were removed, but who knows, perhaps this got rid of some hidden file somewhere that had been causing all of the problems. Then I used the regular uninstall process from the control panel, and that worked. All HP programs were gone upon reboot. Note about step 3: I counld not believe this would help, but did it, and again, who knows, perhaps this is critical. Note about step 4: I assumed that step two 'terminate and stay resident programs' turned off my McAfee firewall and antivirus, so I did not turn it off. And I elected to be off the internet during install because I am always fearful about turning off those programs. However, and this may be the source of problems for many people, the HP list was very specific to turn off the Windows 7 firewall. I checked it and it was running, even though I thought McAfee was in charge. So I did turn off the Windows 7 firewall. Subsequently I learned that many people who have upgraded from earlier Windows operating systems to Windows 7 have the Windows firewall operating along with their other firewall, without knowing it. Apparently this does not happen if you did a clean install of Windows 7 rather than an upgrade install. Note about step 5c: On many of my tries the installation program would not terminate or complete, and I would get a partial install that allow some functions of the printer to work, but not Solutions Center. The only way I found to prevent this was at the step near the end, where you hook up the printer, select the box that says it's okay to connect it later. The installer program dumps an icon on you desktop that allows you to connect the printer after the installation shows complete and terminates by itself. By clicking the icon and plugging the cable into computer and the powered-on-printer when directed, the device installs perfectly. That was the only way I could get a full install, or get the installation to terminate. During the two days of trying to make this work I also reinstalled the latest version of Flash player since I read that HP Solutions Center needs it to show screens on your computer about printer functions. Of course downloading Flash onto a 64-bit version of Windows 7 is a little tricky too, but not that difficult. I do not know whether that was important, but it is one more thing to try if you can't make your Solutions Center part of the printer program work. I learned way more about the unintall/install process than I ever wanted to know. Sorry to be so wordy, but after two days of frustrating work on this I thought I should share this, in case any of these ideas could help someone else who is hung up on this. Perhaps there is an easier fix somewhere. The six-step process was on an HP help site and was not even for my specific printer, but the similar list from my model did not work. Wish I knew what the secret to success might have been.

Help with canon Lide 50 installation really stuck!

so after about two hours of trying to install my canon lide 50 again to scan some drawings I know now how bad canon is with its support with their scanner software. I have read a few very helpful sites but my problem is unsolved
this blog ( http://blog.dylanmullins.com/?p=254#comment-146) covers the problem by making two folders /Library/Application Support/Canon/ScanGear/Plugins and installing the new canon drivers there.
I did this and everything is in place correctly named but still my scanner goes unrecognized, I have the exact problem as this user.
CNYMIKE: I’ve installed the CanoScan Toolbox 5.0 for my Intel iMac but when I go into settings, the scanner doesn’t show in the dropdown because it can’t see a driver. I have the driver but do not know where to install it so that CanoScan Toolbox 5.0 can see it. Putting it in the same folder as the CanoScan Toolbox 5.0 does nothing. Neither does putting it in /library/application support/canon/ScanGear/plugins.
I installed canoscan toolbox 5.0 and this is the driver I got from canon http://software.canon-europe.com/software/0019057.asp?model=
if anyone thinks the drivers are not in the correct place or know a different driver please let me know this issue is beyond frustrating WAY TO GO CANON!

Are you connected to the scanner directly by USB or are you trying wirelessly?

Cannot get Canon LIDE 220 Scanner to work with Acrobat XI Pro, Acrobat will not let scanner add pages to existing PDFs

Hi
I have recently purchased a Canon Scanner LIDE 220 for my new PC which has Windows 8.1 64-bit and ADOBE ACROBAT XI Professional.
I NEED to be able to open PDF documents and add pages by using the scanner, but the scanner is not being accepted by ACROBAT. I get messages that there is no scanner connected or no driver installed. I have uploaded Canon's latest drivers for the scanner but when I try to get Acrobat to accept the scanner it says the scanner will not accept presets.
I need some help!!
Thanks
Andy White

Andy,
Some scanners do not support presets, so when you choose an unsupported scanner from the pop-up menu, a dialog stating "This scanner does not support presets" appears. Have you tried scanning using Custom Scan through File > Create PDF from Scanner > Custom Scan..?
Thanks
Varinder

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

I cannot run Adobe Video Encoder, I get this error: ' Adobe Media Encoder CS6 6.0.1 Update Installation failed. Error Code: U44M2P7'

Hi
Uninstall the Adobe Application manager from your computer.
and download the latest version of the AAM from the below mentioned sites.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774- For Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 - For Windows
Once installed , Then try to update the application by launching the application and Help--> Update
Hope It Helps
Thanks

Windows XP i-Tunes wont open.Message comes up "i-Tunes cannot run because some of its required files are missing.Please reinstall i-Tunes. Tried reinstalling but quits midway thru installation

I have Windows XP & until recently i-Tunes was working fine.Now when I try to open I get this message "i-Tunes cannot run because some of its required files are missing. Please reinstall i-Tunes. So I did. Midway thru ,installation stops & same message is repeated. So I uninstalled i-Tunes, Downloaded new one,went thru installation process for the same result & same message. Have tried procedure 4 times,resulting in same result each time. HELP!!!!!!!!!!!!!!!

I did try to uninstall and reinstall. It messed up my computer. I had to "RESTORE" from the prior days backup. This was not helpful at all. I'm used to losing all my stuff when I connect to iTunes, that's a whole other issue, but now I'm completely banned from any updates to my phone at all. Geeze.......

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found Help!

I am running Mac OS 10.6.7 I cannot run a java based program from the net when parental controls are set the error is The error is Load: class installer.CheckVersion 13. class not found

Then, talk to the person running the lab.

Install ATG-Service9.4 appear "The installer cannot run on your configurat"

Hi,
when i install ATG-Service9.4 on my computer, after file has been extracted and loading picture is display, but an error appear when the loading nearly finish. "The installer cannot run on your configurat",
I google this issue and find some advises, one of them is right click the exe file to open the "Properties" and change to compatibility tab, use the "Windows XP" mode to run this exe file.
I do as it told but the issue is still there. My os is Windows 7 64bit.
The same issue is also appear while I'm installing ACC9.4.exe
THX~
帖子经 user13777844编辑过

Since you are trying to install Service 9.4 and ACC 9.4 so you should have already installed ATG 9.4. Didn't you face similar issue while installing ATG 9.4? You can try again by changing installer's compatibility mode to Vista with latest SP if XP mode is not working.
To further investigate the issue, you can press [CTRL] key when launching the installer and keep it pressed down while the InstallAnywhere wizard extracts the files until it reaches 100% in progress bar. Then you should be able to see a InstallAnywhere debug window open and it might give you hints to why or where it is failing. You may also want to take a look into the InstallAnywhere log file that would get generated within the ATG directory.

After fresh installation on a new machine, my licensed copy of Adobe Encore CS6 "cannot run in non-royalty serialized mode."

"The application needs to be serialized with a royalty bearing serial number."
I have done everything recommended in all of the other threads relating to this issue -
Uninstalled the entire CS and used the Adobe cleaner tool - to no avail.
Uninstalled just Encore and re-installed, nothing.
And multiple combinations of the above mentioned.
Really need this to work, ASAP. We've tried to contact Adobe via phone, chat, and other means. They are very to receive an audience from, it appears. Can anyone offer a different solution?
This is for a brand new edit suite that is running Windows 7 pro, 32 GB of RAM, and the [email protected] GHz.

I did not see this earlier. Forums are a bit odd today.
Do you have a subscription (to the cloud) or is this a perpetual license? You cannot run Encore in trial mode.
Generally, with CS6 suite (or earlier?) this indicated that Premiere is not activated, or there is a problem with activation. What version are you trying to install?
Unfortunately, the link that tells you how to fix this went missing in action some time ago.

During installation of iTunes appears an error message: Itunes cannot run because some files are missing. What can I do?

Recently I received an iPad2 as a gift. I had iTunes because an iPod I had. First I put some productivity apps through my computer. Then I bought some other games apps through WiFi. then when I try to synchronize, I lost my productivity apps and just keep those buy on WiFi. Now I try to install iTunes again, and what I received at the end is a message that tells me "iTunes cannot run because some of its required files are missing. Please reinstall iTunes".
I did it a couple of times. Same result. One of this times, I also retired those programs recommended on help page: iTunes, QuickTime, Bonjour, Apple Mobile, etc. (in the order indicated)
Your help will be appreciated.

same issues here... Using windows 7... I can't install none of the 3 soft. No Safari... No Quicktime... No Itunes... Running 32 bit windows... Error messages "Error 7" and some other error messages durint install... Any help will be appreciated... Thanks

Canon Lide 80 - not working after 10.5.8 update

Hi,
Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran Elements through Rosetta and it scanned with no problems however this now does not work.
The plug-in is still selectable when using PSE6 but I get the following message "The necessary file could be missing or damaged, or the settings are incorrect. Reinstall the scanner driver. Scanner driver will be closed"
I have made sure I have the latest plug-in but to no avail. Any assistance would be greatly appreciated.
Cheers
Andrew

Can't speak specifically to Photoshop Elements, but my LiDE 80 works fine on 10.5.8 using both Canon's CanoScan application as well as VueScan, both of which use the same plug-in architecture as Photoshop.
This is on a MacBook (Santa Rosa) after updating to Leopard 10.5.8 (it was previously running 10.5.4, where the scanner also worked).
I am using the latest ScanGear driver and CanoScan Toolbox installs from Canon's US support website, where the
filenames are LiDE80_7252MXEN.dmg and CSTb4130MXE.dmg respectively (the Canon site shows an update date of July '09, but in actuality none of the files have been updated since 2005).
I didn't do anything special -- the scanner continued working normally after the system update.
What I'd try is remove the driver (just to be safe, download & use Canon's driver removal utility from the same download page), search & nuke any files called Scangear on the machine (I'd also remove CanoScan if you have it installed), then reinstall from scratch.

Canon Lide 30 Trouble Fix

Wanted to share this solution as we COULD NOT scan to Image Capture or Canoscan Toolbox 5, on Leopard, with our old Canon Lide 30 scanner.
We did find an old version of Canoscan Toolbox X (4.1.3) and IT WORKED like a charm with Leopard. We scanned 100 photos into JPEGs using the toolbox alone.
Don't know where you can find a scan of toolbox x 4.1.3 online, but if I find it, I'll addend a link.

Thank you so much. Several topics that came up when I googled the scanner declared that Canon Lide 30 with MacOS 10x was a dead-end trip. Following are more explicit instructions for newer Mac users.
1) make sure that users have read/write permissions in Macintosh HD/Library/CFMSupport (find this folder and command-I it to change permissions) Found this tidbit on another website.
2) download the Canon scan toolbox http://www.versiontracker.com/dyn/moreinfo/macosx/16292&mode=feedback&vid=84900
3) unstuff it. You might need to download StuffitExpander to do this.
http://my.smithmicro.com/mac/stuffitexpander/download.html
4) Finish the Canon toolbox installation
5) Download the most recent driver for Lide 30 from Canon's website. (this might change so log on yourself.)
I did not try the latest version of toolbox after I corrected the read/write permissions so, perhaps, Canon has fixed this. Who knows?
I have been able to scan everything I have wanted so far. Thanks again.
BTW: I changed to the iMac from HP & Vista because I was unable to use much of my computer investments after my XP system was stolen. I have been able to use my Palm Zire 71, my Canon Lide 30 scanner, a plethora of software unsupported on Vista. So far everything has been either directly on the iMac or supported via VMFusion and XP on the iMac. Truly an awesome experience.

Problems with using Canon LiDE 210 and OSX 10.7.4

I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
Does anyone have any experience of this issue, does anyone know how I might resolve it?
Many thanks,
Jeff

Cannot run canon lide toolbox installer

Similar Messages

Maybe you are looking for