Cannot run install program on new Dell inspiron

Using Explorer, the default browser on my new computer, I went to the Mozilla.org site and clicked the link to download Firefox. A prompt appears at the bottom asking if I want to run the program, and I click "yes." The green status bar appears, gets to 61%, disappears, and another box appears asking if I want to allow Mozilla Corporation to make changes to my computer. I click "yes," the box closes, and nothing happens. I went through the install process by saving the file to my downloads instead of running it immediately; got the same result. I cannot get past this point to the Mozilla setup wizard to install the browser. Any help with this would be greatly appreciated. Thanks in advance.

Download and save the full off-line installation package from here. <br />
http://www.mozilla.com/en-US/firefox/all.html
Then close IE and start the installation.

Similar Messages

I need help installing iTunes on my new Dell Inspiron with Windows 7.

When I attempt to install iTunes (downloading from the iTunes website) on my new Dell Inspiron with Windows 7, I get the following error message, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
Please help. Thank you.

Have you tried to install other programmes on the same PC? If they have worked, your installer should be in working order, so redownload iTunes and try again

Old HP 1160Le to new Dell Inspiron. Limited print options.

Have just started using new Dell Inspiron, I think Windows 8. Connected with printer in Port 1 with driver for HP Laserjet 1160. Printer works but some print options are not available. Cannot select Print odd number pages or Print even number pages, or Print to File. Probably more limits just not found yet. Have tried looking at defaults, no luck. Tried to find HP Laserjet 1160 Le in wider PC listing, no luck. Yes, the printer is old and just black and white, but has always worked until now. How would you go about adding these printing features or expanding print options in general?

Hi there and welcome to the forums
I saw your post about trying to install and use your PSC 750 on your new Windows 8.1 system. After checking the drivers out for this printer, I have discovered that there is no driver available for Windows 8.1. Perhaps try running the HP Print and Scan Doctor to see if that will help with printing. If not, I would then suggest looking into an upgraded printer which will have more up to date software and would most likely function with 8.1.
HP PSC 750 All-in-One Printer Drivers
If you were to call HP, they may have a trade in option for you, if you're interested, I will include their contact info.
If you're calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
I hope you found this information helpful!
Enjoy the rest of your Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows update not working on new Dell Inspiron 7000 (7537)

I currently have Windows 8 on my new dell inspiron (actually refurbished) 7000. Only things I've done since getting the computer: I removed McAfee and turned on Windows defender (which also won't update). Windows update shows about 93 updates
but when I hit install it says it is downloading by never moves past 0%. I used the auto fix that Microsoft offers for windows update to no avail. Not sure what to do now.

Hi,
I agree with Milos.
I suggest you upload the Windowsupdate.log so that we can help you analyze the issue.
By default, the Windows Update client records all transaction information to the following log file:
%windir%\Windowsupdate.log
Meanwhile,please check the following services to ensure they are in a start state.
Windows Module installer service
Cryptographic Services
Windows update services
Background intelligent transfer service
Regards,
Kelvin hsu
TechNet Community Support

Brand new Dell Inspiron 3847 --No audio output

New Dell Inspiron 3847. Braand new right out of the box and no audio output--never had this problem on my HP's or IBM Machines.
Is there a specific driver download link?

* Restart
* Press F2
* Open Advanced
* Open Onboard Device Confugration
* Open Onboard Audio Controller
* Set to Enabled
* Press F10 to Save and Exit
* Once back into Windows, open the Device Manager
* Click the + by Sound, video and game controllers
* It should state Realtek Audio Codec controller. If it does, then the driver is installed correctly
* Close the Device Manager
* Right-click the Speaker icon on the taskbar
* Left-click Playback Devices
* Right-click Realtek audio
* Left-click Set as Default Device
* Re-test the rear green audio out jack using standard headphones

I have a new Dell Inspiron 15R. I closed it without shutting it down and when I tried to start it up I get a blank screen with my cursor. What's wrong.

I have a new Dell Inspiron 15R. I closed it without shutting it down and when I tried to start it up I get a blank screen with my cursor. What's wrong.

You may get a reply here but it's best to post a question in the columns it naturally belongs to; in this case Dell forums.

Adobe Acrobat 8 Pro Freezing After Install on Brand New Dell Optiplex 580

Hello,
I was wondering if anyone knew of a solution to an issue I am having.
I installed Adobe Acrobat Pro 8 onto a brand new Dell Optiplex 580 running Windows XP (AntiVirus was not installed yet). When launching, it freezes 3-5 seconds after opening and I need to open Task Manager to kill the process.
I have tried:
Repair install
Deleteing Preferences folder and letting the program recreate it
Manually starting and restarting the FLEXnet service
Running in compatibility mode
Applying the updates for Adobe Acrobat Pro (up to 8.2.4)
Running Adobe without background services
Manually uninstalling and reinstalling
Thanks for your help in advance,
Seth
Message was edited by: ssd008

Another possibility to check is the free space in the TEMP folder. I believe Acrobat uses the TEMP folder for temporary storage. You might even consider increasing the size of the TEMP folder. At least this is something else to check.

Problem facing installing Solaris 10 on Dell inspiron 6400.

Hi,
I am facing problem in installing Solaris 10 on my Dell inspiron 6400.
It is giving "cannot find driver for screen device /isa/motherboard@1,61" error.
Please help...
Thanks In Advance
Saurabh

Hi all,
I've also the same problem, I tried the 11/06 but after GRUB , it hangs. HereBelow the HCL.
No Solaris Driver
     No Solaris Driver
     Multimedia
     Intel Corporation
     82801G (ICH7 Family) High Definition Audio Controller
No Solaris Driver
     No Solaris Driver
     Network
     Intel Corporation
     PRO/Wireless 3945ABG Network Connection
Solaris 10 11/06
     Solaris 10 11/06
     Firewire
     Ricoh Co Ltd
     Unknown device
     hci1394
Note-1
     Note-1
     Network
     Broadcom Corporation
     BCM4401-B0 100Base-TX
     bfe
Solaris 10 11/06
     Solaris 10 11/06
     Video
     Intel Corporation
     Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
     vgatext
Solaris 10 11/06
     Solaris 10 11/06
     Storage
     Intel Corporation
     82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE
     pci-ide
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #1
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #2
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #3
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB UHCI #4
     uhci
Solaris 10 11/06
     Solaris 10 11/06
     USB
     Intel Corporation
     82801G (ICH7 Family) USB2 EHCI Controller
     ehci

Cannot open installed programs? Insufficient permissions?

My apologies if this question has already been answered, or if I'm posting in the wrong place. We just got two lovely new macs in the library - one is a 20 inch iMac running leopard, to supplement our two eMacs running Panther and Tiger respectively. On the iMac, I asked that Final Cut Express and iWork be preinstalled. The disks came with the machine and I installed them today, typing in the registration codes when prompted. However, both times I got a message that the user (I was installing from the kids' desktop, which is a standard account) did not have sufficient privileges to complete the installation. After this, I was prompted for my administrator's code, typed it in, and completed the installation.
Here's the result: I can run both programs from the library desktop, but neither one will open from the teen's desktop. And I want the kids to be able to use the programs! I also keep getting asked for the registration numbers; the computer doesn't seem to remember that I already entered it. We had similar problems on the eMacs when we gave the kids a limited account, but they were mostly solved when we changed that to a standard account, which is what we have on the new iMac.
I'm sorry if this is unclear, but leopard is brand new to me, and I still don't feel as expert with OS X as I was with the classic OS. It is a beautiful machine, though! I hope we'll be able to get those programs working for the kids - all the preinstalled programs are working beautifully. TIA!

For some reason the programs are working now. I don't know how or why, which is frustrating, but the good thing is that they are working.

Installing itunes on new dell/ Vista, error that no audio cd can be found

After installing intunes on my new dell laptop, got message that it "was not properly installed. If you wish to import or burn cd's, you need to reintall iTunes". I uninstalled and reinstalled it. Same error message. Diagnostics says "no audio CD found". I'm on my 4th out of 5 allotted downloads because of old dell crashing. don't want to uninstall again if I can help it. Please help me.
Sandyc

New Dell in title, old Dell in comment. Have you tried updating the driver for the device from the Dell website? Put the service tag number in and it should show you all available downloads.
And 4th out of 5 allotted downloads? Are you referring to authorizations? De-authorize the machine before you remove the software, if that is what you are actually talking about.

After 10.6.7 update cannot run any programs!

Everything was fine yesterday on 10.6.6 Updated this morning to 10.6.7 via Software Update. All went fine. Restarted and now cannot run Finder, Safari, iTunes etc etc ALL crash with unexpected error. Repaired disk in Safe mode but no change. Any ideas?

Because I've had strange problems with past system update downloads, I now always get my system updates from http://support.apple.com/downloads/
I always use the Update Combo version. It installs a fresh set of all previous updates as well as the new one. This gives you a fresh beginning with system 10.6.x. Since I adopted that practice, I've had no more issues with updates.

Just bought a new DELL Inspiron 15R laptop, can't get Arch iso to boot

Just bought a brand new laptop and I've been really wanting to try Archlinux (coming from Fedora)
I hit F2 to go into my boot settings and I enabled "legacy" mode. I then changed the boot order to CD/DVD first, I saved the settings and rebooted the machine with the Archlinux ISO in the drive. (this is the 10.1.2013) version of the ISO.
When the machine reboots I can see the little CD/DVD drive LED light up for a second or 2 but it's like it's not seeing the CD as a bootable CD. I tried searching all over but I'm still stuck, desperate for help here. Just to make sure it wasn't something wrong with the CD I tried the same CD in another machine and right away it came up with the Archlinux menu screen.
I have since installed Kali/Debian on this new machine with no problems (the new DELL) - I still want to do a dual boot with both Kali/Debian and Archlinux. Any ideas on what I can try?

You can use the bootstrap tar.gz files that are found in the same directory as the iso on every mirror. If you go to the download page, select the mirror of your choice, you will see a file called "archlinux-bootstrap-2013.10.01-x86_64.tar.gz" (one for i686 also). That is what you need.
Unpack it whereever you think is appropriate, if you have enough RAM you can use /tmp. Then after setting up the partitions in the host (Kali/Debian, or whatever), you can arch-chroot to that unpacked directory. There you will find all the tools necessary to install (pacman and the arch-install-scripts).
This method has one issue though, and that is that the arch-chroot script (and maybe others) requires some pretty new versions of various things. In particular, I think that a pretty new version of bash is required. So I am not sure about the viability of this solution on anything debian, as their stable repos tend to be pretty conservative. It also means that you need to have a pretty good understanding of the install process, as you will still mostly follow the beginners guide, but it will require a few changes in the procedure.
Good luck.

Brand new Dell Inspiron won't burn CD's in iTunes

Just bought Dell Inspiron 1501 with a TSSTDVD+RW TS-L632H DVD-CD combo burner, running Windows XP Home. When I insert a blank CD-R, iTunes says it is initializing the burn, then ejects the CD and asks for a blank CD. I burned a CD in Windows Media Player with no difficulty, so it's not hardware. Is iTunes just incompatible with Samsung burners or what? I've tried the Samsung site, they don't even list the "H" model, just D and L. Please, anyone with info pleas respond. Thanks,

I don't think it's your DVD+/-RW drive--I have the same model on my Dell Precision M65 Vista laptop. (And I can burn CDs & DVDs with no problem using iTunes 7.3.1.) My computer is a few months old and I did have to download a firmware update for the drive. You could check the Dell downloads site to see if there is a firmware update for your computer running Windows XP.
Others who can't get CDs to burn using iTunes ver. 7.3.1 have downgraded to ver. 7.2--apparently this version works for some reason. Here's a post about this if you're interested:
http://discussions.apple.com/thread.jspa?threadID=1017546&tstart=0

Cannot run java program after archive and install

Hi,
I am new to this forum and appreciate the help and advice given here.
Yesterday, I did an archive and install on my system which install 10.4.3. Afterwards, I installed X11 and did the software updates which brought my system back to 10.4.8. It also installed Java 1.3.1, 1.4.2, and 1.5 (J2SE5).
Prior to the archive and install, I had no problems executing a java program either in the command line in an X11 window or using Eclipse. However, when I try now I get the exception message "Exception in thread "main" java.lang.NoClassDefFoundError:". I checked my CLASSPATH and it's not the problem. I am able to compile, and execute the javadoc command. If I type java -version I get
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-112)
Java HotSpot(TM) Client VM (build 1.5.0_06-64, mixed mode, sharing)
Under Eclipse, I am able to see the Java versions under Preferences - Java - Installed JREs but if I go to the Run -> Run As menu, I see (none applicable).
Thanks for any suggestions to fix this.
James
Dual 867MHz G4 Mac OS X (10.4.8)

I resolved the issue. I reinstalled XCode and had an issue with one of the files I was testing.

Cannot install program because newer version already exists?

Hello,
I'm trying to install fontographer but it says it cannot install on this disk because a newer version of the program is already installed.
I find this quite strange because I've completely removed every single file of the other version, but still it says it's installed.
Anyone knows how I can solve thi problem?
Many thanks to anyone who is willing to help me.
Greetz,
Finn.

Use the developers method to completely uninstall the newer version of the program.
Sometimes a program will leave it's preference files because you might be uninstalling and reinstalling the same version to fix a software issue. The older version see's the newer version preference files and gives the errors.
Use the free Easy Find and find the programs file(s) and/or just remove them from your ~/Library/Preferences folder by Finder > Go to Folder > /Library/Preferences
There may be files in other locations as well. Perhaps it's best to ask the developer where all the files are for completel removal.
http://www.macupdate.com/app/mac/11076/easyfind

Cannot run install program on new Dell inspiron

Similar Messages

Maybe you are looking for