Cannot run iTune9 on my new Desktop PC Traditional Chinese Version

After installation of the latest iTune9 on my new desktop PC with Win7 traditional Chinese Version. A error message "My Music" does not exist when I press "iTune". I can find a Article - HT1866 mention silimiar issue on XP. I followed the instruction but failed on my WIn7, what can i do??

Try holding down the shift key when you go to launch iTunes. If this is the first time you've installed iTunes on the PC, click the "Create library" button, and create your library where you please. If you have installed iTunes before (and have an existing library), click "Choose library" and browse to the location of your current iTunes library file.

Similar Messages

Cannot Run, Uninstall or Reinstall Palm Desktop for Palm M500 on Windows XP

I have a Palm M500 and Windows XP Home Edition with service pack 3 installed. Palm deskop was working smoothly, but now every time I try to run Palm Desktop I get the following error message: "Windows Installer: the feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'Palm Desktop.msi' in the box below." The box below says "C:\DOCUME~1\user\LOCALS~1\is33\1".I tried to uninstall Palm and I get the same message and Palm does not uninstall. I downloaded from Palm Support downloads the PalmDesktopWin414EN update and tried to install it and I get the same error message so I cannot install it. Please Help !!!
Post relates to: Palm m500
Post relates to: Palm m500

Hello DiegoK and welcome to the forums......
I would try going into safe mode and following the instructions below.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to C:\Program Files\Palm or
Palm One. Highlight your Palm Desktop username and right click and copy.
Then go to your PC desktop, right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer. Like the above folder, delete the Palm folder. Once this is done,
you will need to delete some registry keysfrom your PC Operating System registry.
Word of warning, going here and deleting the wrong thing can cause your PC
to not start up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This will show them everything
they need to delete. To retain your current Registry settings, we need to do a backup of the Registry.
On the PC, go to start and run type "regedit" without quotes
Highlight MY COMPUTER, go to File --> export. Should pop up with a Save As
box. Current location is fine should be in My Documents or you can change to a location you will remember.
In the file name box, type "Regbackup[todaysdate]" i.e. Regbackup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install,
and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer
Then reinstall your Palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before you create a hotsync name.

Cannot run install program on new Dell inspiron

Using Explorer, the default browser on my new computer, I went to the Mozilla.org site and clicked the link to download Firefox. A prompt appears at the bottom asking if I want to run the program, and I click "yes." The green status bar appears, gets to 61%, disappears, and another box appears asking if I want to allow Mozilla Corporation to make changes to my computer. I click "yes," the box closes, and nothing happens. I went through the install process by saving the file to my downloads instead of running it immediately; got the same result. I cannot get past this point to the Mozilla setup wizard to install the browser. Any help with this would be greatly appreciated. Thanks in advance.

Download and save the full off-line installation package from here. <br />
http://www.mozilla.com/en-US/firefox/all.html
Then close IE and start the installation.

TS1538 i've followed all the step in the article and the iphone still does not show in itunes. Running windows 7 on new computer. iphone is version 4.

can't see iphone in itunes. installed itunes again. reset phone. shut off and restarted services. running out of ideas.

Follow ALL of the troubleshooting steps in the article from which the question was posted.

Cannot install "Acrobat X Pro - English version" in "Windows XP - Traditional Chinese version"

What is the problem?
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Hi Kenneth,
Double-byte characters such as Japanese kanji or Chinese hanzi cannot appear in installation paths.
It sounds like that's what you might be running into.
-David

Cannot Run Photoshop CS5 on SSD

MAC PRO Spec:
MAC PRO 6 cores Intel Xeon "Westmere"
RAM=16GB by Kingston (apple certified RAM module = KTA-MP1333/4G)
HDD=Western Digital black label 1TB (original shipped by Apple)
SSD=Kingston Hyper X 240G
OS= MAC OS X Lion
Adobe product = CS5.5 design standard traditional chinese version
Problem description:
I've tried either Apple or Adobe tech support for resolving my problem. Unfortunately, I still cannot resolve my issues. Look for anyone could help me out to solve my problem. Currently,I am not able to start photoshop on my SSD drive while HDD is my secondary drive. Anyone know the issue and how to resolve the problem.
Let me describe how I set up my Mac Pro and how the problem happen.
While I got my Mac Pro (only have one HDD), I install my CS5.5 and run photoshop. Everything just works fine. While I got my SSD, I make the SSD becomes a boot drive on the Mac PRO (the HDD was set to become a data drive now. Everything installed in the HDD was still there, and I don't remove any of CS5.5 application which was installed earlier). Then I start to install CS5.5 on SSD. The first time is ok to run photoshop. After open and close photoshop a few times, I start to run photoshop again. Then the error message occurred and the photoshop cannot run at all. The error message said "The photoshop cannot start because cannot find the temporary stored files. "
Following is my testing and result
1. I've tried to let either SSD or HDD as a single drive to start photoshop....No problem.
2. HDD as a main drive and SSD as a data drive..... No problem to start photoshop from HDD
3. SSD as a main drive and HDD as a data drive..... Error mesage and photoshop cannot run

…or you could have illegal characters in the names of volumes or folders anywhere in the path to the files the application cannot find.
Stick to numbers, underscores and the characters of the English alphabet. No accented or special characters such as äöü ß áéíóú àèìòù ãõ, no apostrophes, asterisks, pound signs #, commas or slashes, etc.

How to create new user and group on version 10/09 ?

Hello,
I have used previous versions of Solaris 10 installed 1 or 2 years ago, and now, I just installed Solaris 10 x86, version 10/09. I notice that the desktop is different now, where I see "Desktop System for Solaris".
I remember in the past, when logged in as root, I could easily create groups and users.
With the Oct 2009 Solaris x86 version, I looked around, but didn't know how it's done on this version.
Is there a tool to easily do this on the 10/09 version?
Also, will all C programs and UNIX shell scripts on previous Solaris 10 versions (1 or 2 years ago) run
fine on this new Solaris 10, 10/09 version without problems? Thanks.

The GUI to create users is 'smc', which should work in 10/09. The CLI to create users is 'usermod'.
Yes, shell scripts created under earlier version of Solaris should work.
.7/M.

After fresh installation on a new machine, my licensed copy of Adobe Encore CS6 "cannot run in non-royalty serialized mode."

"The application needs to be serialized with a royalty bearing serial number."
I have done everything recommended in all of the other threads relating to this issue -
Uninstalled the entire CS and used the Adobe cleaner tool - to no avail.
Uninstalled just Encore and re-installed, nothing.
And multiple combinations of the above mentioned.
Really need this to work, ASAP. We've tried to contact Adobe via phone, chat, and other means. They are very to receive an audience from, it appears. Can anyone offer a different solution?
This is for a brand new edit suite that is running Windows 7 pro, 32 GB of RAM, and the [email protected] GHz.

I did not see this earlier. Forums are a bit odd today.
Do you have a subscription (to the cloud) or is this a perpetual license? You cannot run Encore in trial mode.
Generally, with CS6 suite (or earlier?) this indicated that Premiere is not activated, or there is a problem with activation. What version are you trying to install?
Unfortunately, the link that tells you how to fix this went missing in action some time ago.

Cannot run workbook from desktop

Greetings All,
Discoverer version 10.1.2.0.2,
Disco Admin has created business areas and workbooks. Admin has also shared workbook with a user. When user tried to run workbook user is not prompted for parameters. WHen user refreshes worksheet still not prompted for paramater and user gets a blank worksheet. Basically, cannot run any shared workbook.(NOTE: do not even get msg that query returned no data).
When user tries to create a workbook by selecting items for a folder in business area, then again the same result - does not didplay any data (NOTE: do not even get msg that query returned no data).
User has select from all tables priv.
Any suggestion?
JP.

Hi,
Does the workbook bring back data for any other user?
Does this user have the Create/Edit query (Desktop/Plus privilege?)
Thanks.

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

I need to sync a new desktop to my laptop and android device. I have tried everything in your help section and cannot make it happen

I just got a new Comp and my old one tanked. I am trying to recover my firefox setting and book marks and such. I have tried doing the sync.... but it doesnt seem to want to. I am trying to sync it with my spare laptop. What I really want to do is sync it with my old laptop whose hard drive I actually had installed as a backup drive in the new system. Its complicated. I actually have the old comp synced to my android phone... but can not get it to sync with the new comp either. Its making me nuts, I have so many book marks and to add them all by hand is going to suck!!! I got through firefox's walkthrough, and it says to go to the Firefox button and select Options, then select the Sync Panel... that is the first problem! there is not "Sync Panel" on either the new or the old comp. It does not exist. I can select "set up Sync" but that is not under options, it is separate... and get the choice Create new account, or I have an account... then I can either enter my account info and a recovery key (which i dont have and cannot find) or I can get a 12 digit code to enter to sync the other device. problem is, both computers generate a code, when one is supposed to have a blank space so I can enter the sync code. Some times I get the blank space on the comp that I am trying to sync the old one too... and I enter it and nothing happens. HELP.

Thankyou. I actually figured it out partially myself. I simply opened a new Firefox sync account so that I could sync my backup laptop to my new desk top. The issue here is that I am dealing with 4 devices.
1.'''Original Laptop''' (which is no longer functional, though I have the harddrive installed as a backup drive in my new tower... it was cleaned of all bugs prior to install)
2. '''My backup Laptop'''. I have been using this device for the last 3 weeks. Was unable to sync it with my old one before it went down, so I have since added many bookmarks as such to the onboard firefox browser.
3. '''My android phone''' (Samsung Note 3... top of the line current device) to which I actually have the bookmarks from my '''original laptop ''' synced. That sync was on my now old sync account
4. '''My New Desktop''' Just out of the box tonight. I have now synced my backup laptop to this device.
The reason I started a new Sync account with a different email address is because I could not get anything to work as the Firefox instructions said to. So once I setup a new one everything worked perfectly as far as syncing from the backup laptop to the desktop. I finally was actually shown the previously mythical "Sync Pannel" which would not show before.
My question is this now:
I see that one of the options when sycing allows you to blend the saved data with both devices (assuming that both have bookmarks and browsing history etc.)
I need to be able to add in the sync data that is stored on my android to the other devices, most importantly the desktop. Now that this data is in two separate sync accounts... is that possible?
I had issues with both the desktop and the backup laptop being able to log into my old sync account even after I was successful in resetting the password. I tried to use the recovery key once I reset the PW and i copied it exactly and even regenerated a new one. The sync system would not accept the copy and pasted exact copy of the recovery key, it kept saying invalid key?
I would really like to get my sync data from my android to sync and blend with the new sync account as I have many many bookmarks on the android that were on my old laptop.
I hope that this makes sense... It is very tough to explain!
Will appreciate all help.

Please help!!! Cannot run Windows Update in Win 7 Pro after changing new hard-drive. (X201s)

Hi everyone,
I have been using my thinkpad x201s for more than one year by now. And recently I change a new and larger hard drive for my laptop. When I tried the thinkpad rescue and recovery disc on the new hard drive, everything works fine except that I cannot run Windows Updates after the installation was finished. The recovery DVDs were burned directly from the original image stored in the computer when the first I received my laptop last year.
Every time when I try to run the Windows Update, it shows the following: "Windows Update cannot currently check for updates, because the service is not running, you may need to restart your computer."
I restarted my computer later but nothing changed. Can't run Windows Updates and can't even install IE9.
I then moved back to my old hard drive and everything is normal, no problem with Windows Updates. I also tried to create a back-up image by running win 7 Backups and Restore. Later when I changed back to the new drive and followed the instructions to restore my system from the image I created earlier in a USB drive, it worked except that still the system can't run Windows Updates program.
I'm now getting very confused and upset, is it something to do with the software copyright? It's been a week now and I tried to Google the similar problem but no solutions work here. All I want to do is moving my current system to the new hard drive so that I can continue to use my laptop but it just failed updating every time.
Could anyone kindly tell me what to do when changing hard drive in order to avoid the problem I'm dealing with? Sorry I'm not a pro type user and just want my laptop to work appropriately.
My warranty has already expired so I guess the Lenovo Technical Hotline wouldn't answer my questions anymore. Please help!! Much appreciated.
Thanks so much in advance!!

I'm not sure this is the issue, but from your description, it seems as though all you have to do is activate the windows update service. If I were you, I'd search for "Services" in the start menu, open it and look for "Windows Update". Check in its properties that it is set to "Automatic (Delayed)", if it isn't, set it, and start the service, you should then be able to check for updates, be careful though that none of your other programs aren't stopping the service, usually these programs are there to "optimize your performance" or "boost your system",...
Hope this helps.

Can't get 4050n printer to work with new Desktop Computer: running XP

I have a new Desktop Computer, dual processor, which is running XP and MS office 2007. I had my 4050N HP Laserwriter hooked up to my old desktop (which failed in the last two weeks, blown capacitor, etc) and it worked fine with XP on that computer.
So I downloaded the drivers I found for HP 4050N running XP, and can't even get a test page. The connectors seem to be ok. I had to buy a parallel port to USB cable and I have that plugged into the USB port at the back of my new desktop.
Any ideas of what else I should try? If I had a computer virus with the old machine, could it have affected my printer somehow?
I'm at a loss.
Thanks!

Since you mention doing an upgrade I would be inclined to reset the printing system and then add the R2880 queue again.
Open System Preferences > Print & Fax
Move your mouse over the Printers list
Hold down the Control button and click the mouse
Click the "Reset printing system ..." popup
Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again.

Will my new desktop for christmas run starcraft 2?

heres my new desktop im getting:
http://www.bestbuy.com/site/Gateway+-+Desktop+/+AMD+A-Series+Processor+/+4GB+Memory+/+1TB+Hard+Drive...
will it be able to run starcraft 2 on atleast low?
Solved!
Go to Solution.

Depending on the resolution, yes. You will want to upgrade the memory later to improve your performance.

BEA Portal 8.1 Sp4 - Cannot Create new Desktop - DB Error Returned?

Please help.
We are trying to migrate to streaming portal, and are encountering a problem. It appears to be a new problem as it wasn't coming up last week.
Under the Weblogic Admin Portal, I create a Portal. Success
- I then try to create a Desktop using a Portal Template File.
- I select the Portal file we have, and the only Portal file from the dropdown.
- I click "Create New Desktop"
- When the popup displays "WARNING: Portal Template Contains Duplicate Resources" comes up, if I select "Replace conflicting Portal Resources" or "Replace Markup" it fails.
The Javascript alert says (or tries to say)
Error: The desktop could not be disassembled.
Data exception -- row already exist in index AX1_PAGE_DEF on table PF_PAGE_DEFINITION
Any idea what is going on? We haven't taken this a step further due to this problem.
Before you suggest:
- We haven't been doing anything fancy.
- I have not gone into PointBase manually (I wouldn't know how)
- By all accounts it appeared to be working fine, and then it stopped.
Current Setup
- BEA Weblogic 8.1 SP4
- "Production" Domain using JRockit SDK
- Currently using the workstation's PointBase database for the Admin tools.
Full Error
Error: The desktop could not be disassembled.
[com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerException: javax.transaction.TransactionRolledbackException: EJB Exception: : javax.ejb.EJBException: SQL Error while trying to createPageDefinition: SQL [insert into PF_PAGE_DEFINITION ( PAGE_DEFINITION_ID, MARKUP_DEFINITION_ID, IS_PUBLIC, IS_HIDDEN, INTERSECTION_ID, PAGE_LABEL, WEBAPP_NAME) values (?,?,?,?,?,?,?)] database error code [25,222] SQL state [22028] .; nested exception is: java.sql.SQLException: Data exception -- row already exist in index AX1_PAGE_DEF on table PF_PAGE_DEFINITION.java.sql.SQLException: Data exception -- row already exist in index AX1_PAGE_DEF on table PF_PAGE_DEFINITION. at com.pointbase.net.netJDBCPrimitives.handleResponse(Ljava.io.DataInputStream;)V(Optimized Method) at com.pointbase.net.netJDBCPrimitives.handlePrimitiveResponse(Ljava.io.DataInputStream;)Ljava.lang.Object;(Optimized Method) at com.pointbase.net.netJDBCPreparedStatement.executeUpdate()I(Optimized Method) at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate()I(Optimized Method) at com.bea.netuix.application.manager.persistence.jdbc.PageDefinitionDelegate.createPageDefinition(Ljava.sql.Connection;Lcom.bea.netuix.application.definition.PageDefinition;)Lcom.bea.netuix.application.definition.PageDefinition;(PageDefinitionDelegate.java:850) at com.bea.netuix.application.manager.persistence.jdbc.PageDefinitionManagerImpl.createPageDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.definition.PageDefinition;)Lcom.bea.netuix.application.definition.PageDefinition;(PageDefinitionManagerImpl.java:875) at com.bea.netuix.application.manager.persistence.jdbc.PageDefinitionManager_c4el9c_EOImpl.createPageDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.definition.PageDefinition;)Lcom.bea.netuix.application.definition.PageDefinition;(PageDefinitionManager_c4el9c_EOImpl.java:906) at com.bea.netuix.application.transform.disassembler.view.DefinitionManagerFacade.createPageDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.PageView;)Lcom.bea.netuix.application.transform.disassembler.view.CreatePageDefinitionResult;(DefinitionManagerFacade.java:956) at com.bea.netuix.application.transform.disassembler.view.PageViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(PageViewDisassembler.java:75) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:102) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:116) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:116) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.PageViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(PageViewDisassembler.java:109) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:102) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerFactory.createDesktopDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.DesktopView;Ljava.lang.String;)Lcom.bea.netuix.application.definition.DesktopDefinition;(ViewDisassemblerFactory.java:113) at com.bea.netuix.application.manager.persistence.jdbc.DesktopDefinitionManagerImpl.createDesktopDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.DesktopView;Ljava.lang.String;)Lcom.bea.netuix.application.definition.DesktopDefinition;(DesktopDefinitionManagerImpl.java:378) at com.bea.netuix.application.manager.persistence.jdbc.DesktopDefinitionManager_8c1hh8_EOImpl.createDesktopDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.DesktopView;Ljava.lang.String;)Lcom.bea.netuix.application.definition.DesktopDefinition;(DesktopDefinitionManager_8c1hh8_EOImpl.java:46) at com.bea.jsptools.portal.PortalDisassembler.disassemble(Lcom.bea.netuix.application.identifier.PortalPath;Lcom.bea.netuix.application.identifier.DesktopPath;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;ILjava.io.InputStream;Ljavax.servlet.http.HttpServletRequest;)Lcom.bea.netuix.application.definition.DesktopDefinition;(PortalDisassembler.java:133) at com.bea.jsptools.portal.PortalAdminManager.createDesktopFromTemplate(Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;ILjava.util.Locale;Ljavax.servlet.http.HttpServletRequest;)V(PortalAdminManager.java:427) at jsp_servlet._portaltools.__portalmgmttree._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__portalmgmttree.java:3293) at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(Optimized Method) at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Z)V(RequestDispatcherImpl.java:644)javax.ejb.EJBException: SQL Error while trying to createPageDefinition: SQL [insert into PF_PAGE_DEFINITION ( PAGE_DEFINITION_ID, MARKUP_DEFINITION_ID, IS_PUBLIC, IS_HIDDEN, INTERSECTION_ID, PAGE_LABEL, WEBAPP_NAME) values (?,?,?,?,?,?,?)] database error code [25,222] SQL state [22028] .; nested exception is: java.sql.SQLException: Data exception -- row already exist in index AX1_PAGE_DEF on table PF_PAGE_DEFINITION. at com.bea.netuix.application.manager.persistence.jdbc.PageDefinitionDelegate.createPageDefinition(Ljava.sql.Connection;Lcom.bea.netuix.application.definition.PageDefinition;)Lcom.bea.netuix.application.definition.PageDefinition;(PageDefinitionDelegate.java:866) at com.bea.netuix.application.manager.persistence.jdbc.PageDefinitionManagerImpl.createPageDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.definition.PageDefinition;)Lcom.bea.netuix.application.definition.PageDefinition;(PageDefinitionManagerImpl.java:875) at com.bea.netuix.application.manager.persistence.jdbc.PageDefinitionManager_c4el9c_EOImpl.createPageDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.definition.PageDefinition;)Lcom.bea.netuix.application.definition.PageDefinition;(PageDefinitionManager_c4el9c_EOImpl.java:906) at com.bea.netuix.application.transform.disassembler.view.DefinitionManagerFacade.createPageDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.PageView;)Lcom.bea.netuix.application.transform.disassembler.view.CreatePageDefinitionResult;(DefinitionManagerFacade.java:956) at com.bea.netuix.application.transform.disassembler.view.PageViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(PageViewDisassembler.java:75) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:102) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:116) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:116) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.PageViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(PageViewDisassembler.java:109) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.BookViewDisassembler.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(BookViewDisassembler.java:102) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerDelegator.disassemble(Lcom.bea.netuix.application.view.View;Lcom.bea.netuix.application.manager.CustomizationContext;)Lcom.bea.netuix.application.identifier.Id;(ViewDisassemblerDelegator.java:134) at com.bea.netuix.application.transform.disassembler.view.ViewDisassemblerFactory.createDesktopDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.DesktopView;Ljava.lang.String;)Lcom.bea.netuix.application.definition.DesktopDefinition;(ViewDisassemblerFactory.java:113) at com.bea.netuix.application.manager.persistence.jdbc.DesktopDefinitionManagerImpl.createDesktopDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.DesktopView;Ljava.lang.String;)Lcom.bea.netuix.application.definition.DesktopDefinition;(DesktopDefinitionManagerImpl.java:378) at com.bea.netuix.application.manager.persistence.jdbc.DesktopDefinitionManager_8c1hh8_EOImpl.createDesktopDefinition(Lcom.bea.netuix.application.manager.CustomizationContext;Lcom.bea.netuix.application.view.DesktopView;Ljava.lang.String;)Lcom.bea.netuix.application.definition.DesktopDefinition;(DesktopDefinitionManager_8c1hh8_EOImpl.java:46) at com.bea.jsptools.portal.PortalDisassembler.disassemble(Lcom.bea.netuix.application.identifier.PortalPath;Lcom.bea.netuix.application.identifier.DesktopPath;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;ILjava.io.InputStream;Ljavax.servlet.http.HttpServletRequest;)Lcom.bea.netuix.application.definition.DesktopDefinition;(PortalDisassembler.java:133) at com.bea.jsptools.portal.PortalAdminManager.createDesktopFromTemplate(Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;ILjava.util.Locale;Ljavax.servlet.http.HttpServletRequest;)V(PortalAdminManager.java:427) at jsp_servlet._portaltools.__portalmgmttree._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__portalmgmttree.java:3293) at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(Optimized Method) at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:1006) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(Optimized Method) at weblogic.servlet.internal.TailFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at com.bea.p13n.servlets.PortalServletFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(PortalServletFilter.java:293) at weblogic.servlet.internal.FilterChainImpl.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(FilterChainImpl.java:27) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Z)V(RequestDispatcherImpl.java:644) at weblogic.servlet.internal.RequestDispatcherImpl.include(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:423) at com.bea.netuix.servlets.controls.content.JspContent.beginRender(Ljava.io.Writer;)Z(JspContent.java:533) at com.bea.netuix.nf.ControlLifecycle$1.visit(Lcom.bea.netuix.nf.UIControl;Ljava.lang.Object;)Z(ControlLifecycle.java:495) at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(Lcom.bea.netuix.nf.VisitorType;Lcom.bea.netuix.nf.UIControl;Ljava.lang.Object;)V(ControlTreeWalker.java:485); nested exception is:
javax.ejb.EJBException: SQL Error while trying to createPageDefinition: SQL [insert into PF_PAGE_DEFINITION ( PAGE_DEFINITION_ID, MARKUP_DEFINITION_ID, IS_PUBLIC, IS_HIDDEN, INTERSECTION_ID, PAGE_LABEL, WEBAPP_NAME) values (?,?,?,?,?,?,?)] database error code [25,222] SQL state [22028] .; nested exception is: java.sql.SQLException: Data exception -- row already exist in index AX1_PAGE_DEF on table PF_PAGE_DEFINITION.]."));

You might have already checked it but just in case, did you check the server console when this happens ?
If there is any problem with the template file, it doesnt create a desktop even though it doesnt complain about this explicitly in the Portal Admin.
Cheers,
Satish

Cannot run iTune9 on my new Desktop PC Traditional Chinese Version

Similar Messages

Maybe you are looking for