Cannot run JSP on Jserv in Oracle 9i on Linux
Hi
I am trying to run a JSP stored in Apache\Apache\htdocs
The link is http://ip:port/xyz.jsp
I have tried several jsp (very basic) but get an error "Internal server error"
I have followed the documentation and configured the conf files accordingly.
the html pages stored on this location can be accessed properly but not the jsp.
I seached for the .java and .class files for the jsp but these files are not created.
Kindly Suggest
Hi,
No error is generated on log file?
Afonso
Similar Messages
-
Running JSPs through Apache Jserv in OC4J
hello there -
I'm hoping someone can help me.
I want index.jsp, our first page, to ACT like a JSP, rather than the current HTML. It seems that httpd.conf wont access OC4J, so i've attempted to access Jserv. Still, things wont work.
If someone could please take a look at what i have so far in httpd.conf, more specifically, near the bottom where i've opened up Jserv, and let me know what i'm doing wrong, i'd greatly appreciate it!
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /devl/ics3/devl/apache/srm.conf and then /devl/ics3/devl/apache/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "/oraapp/9iAS10220/home/Apache/Apache"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile /devl/ics3/devl/apache/logs/httpd.lock
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile /devl/ics3/devl/apache/logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile /devl/ics3/devl/apache/logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 1
MaxSpareServers 2
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 1
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 172.18.4.13:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress 172.18.4.13
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule example_module libexec/mod_example.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
LoadModule oprocmgr_module libexec/liboprocmgr.so
LoadModule define_module libexec/mod_define.so
LoadModule dms_module libexec/mod_dms.so
LoadModule perl_module libexec/libperl.so
LoadModule fastcgi_module libexec/mod_fastcgi.so
<IfDefine SSL>
LoadModule ssl_module libexec/mod_ssl.so
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#Port 7777
#Listen 7777
#Port 80
#Listen 80
## SSL Support
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
<IfDefine SSL>
# Port 80
Listen 172.18.4.13:80
Listen 172.18.4.13:443
</IfDefine>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
User ics3devl
Group ics3devl
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName 172.18.4.13
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/devl/ics3/devl/webroot/apache"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/devl/ics3/devl/webroot/apache">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html index.jsp
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName off
# Add 2003/1/3 test for dynamic virtyal host
# VirtualDocumentRoot /devl/ics3/moff/webroot/oc4j/ct/web/store/%1
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /devl/ics3/moff/apache/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile /devl/ics3/devl/apache/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /devl/ics3/devl/apache/logs/error_log
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog /devl/ics3/devl/apache/logs/access_log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog /devl/ics3/devl/apache/logs/referer_log referer
#CustomLog /devl/ics3/devl/apache/logs/agent_log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog /devl/ics3/devl/apache/logs/access_log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /icons/ "/oraapp/9iAS10220/home/Apache/Apache/icons/"
<Directory "/oraapp/9iAS10220/home/Apache/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Alias /jservdocs/ "/oraapp/9iAS10220/home/Apache/Jserv/docs/"
Alias /soapdocs/ "/oraapp/9iAS10220/home/soap/"
Alias /perl/ "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin/"
Alias /images/ "/devl/ics3/devl/webroot/apache/images/"
Alias /Fc/ "/devl/ics3/devl/webroot/apache/Fc/"
Alias /html/ "/devl/ics3/devl/webroot/apache/html/"
Alias /gftlist/ "/devl/ics3/devl/webroot/apache/gftlist/"
Alias /articles/ "/devl/ics3/devl/webroot/apache/articles/"
Alias /js/ "/devl/ics3/devl/webroot/apache/js/"
Alias /css/ "/devl/ics3/devl/webroot/apache/css/"
Alias /coremetrics/ "/devl/ics3/devl/webroot/apache/coremetrics/"
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/devl/ics3/devl/webroot/apache/cgi-bin/"
ScriptAlias /cyber/ "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi/"
# "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
<Directory "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
ErrorDocument 404 /404error.htm
ErrorDocument 500 /500error.htm
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost web1-v3
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from localhost web1-v3
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/oraapp/9iAS10220/home/Apache/Apache/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
# Use name-based virtual hosting.
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
#NameVirtualHost *
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]_domain.com
# DocumentRoot /www/docs/host.some_domain.com
# ServerName host.some_domain.com
# ErrorLog logs/host.some_domain.com-error_log
# CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
<IfDefine SSL>
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
</IfDefine>
<IfModule mod_ssl.c>
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First either `none'
# or `dbm:/path/to/file' for the mechanism to use and
# second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shm:/devl/ics3/devl/apache/logs/ssl_scache(512000)
SSLSessionCache dbm:/devl/ics3/devl/apache/logs/ssl_scache
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual explusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex file:/devl/ics3/devl/apache/logs/ssl_mutex
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
# Logging:
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order: higher ones include lower ones):
# none, error, warn, info, trace, debug.
SSLLog /devl/ics3/devl/apache/logs/ssl_engine_log
SSLLogLevel warn
</IfModule>
<IfDefine SSL>
## SSL Virtual Host Context
<VirtualHost default:443>
# General setup for the virtual host
DocumentRoot "/devl/ics3/devl/webroot/apache"
ServerName 172.18.4.13
ServerAdmin [email protected]
ErrorLog /devl/ics3/devl/apache/logs/error_log
TransferLog /devl/ics3/devl/apache/logs/access_log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server.crt
#SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server.key
#SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /devl/ics3/devl/apache/ssl.crt/ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /devl/ics3/devl/apache/ssl.crt
#SSLCACertificateFile /devl/ics3/devl/apache/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /devl/ics3/devl/apache/ssl.crl
#SSLCARevocationFile /devl/ics3/devl/apache/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
<Files ~ "\.(cgi|shtml)$">
SSLOptions +StdEnvVars
</Files>
#<Directory "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin">
<Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /devl/ics3/devl/apache/logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>
<IfModule mod_dms.c>
<Location /dms0>
SetHandler dms-handler
</Location>
</IfModule>
# Perl Directives
#PerlWarn On
#PerlFreshRestart On
#PerlSetEnv PERL5OPT Tw
#PerlSetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
SetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
PerlModule Apache
#PerlModule Apache::Status
PerlModule Apache::Registry
#PerlModule Apache::CGI
#PerlModule Apache::DBI
#PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
#<Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from .your_domain.com
#</Location>
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
ProcNode web1-v3 7777
<IfDefine SSL>
ProcNode web1-v3 80
</IfDefine>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
</Location>
</IfModule>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "/devl/ics3/devl/webroot/apache/fastcgi/"
ScriptAlias /fcgi-bin/ "/devl/ics3/devl/webroot/apache/fcgi-bin/"
<Directory "/devl/ics3/devl/webroot/apache/fcgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
SetHandler fastcgi-script
<IfDefine SSL>
SSLOptions +StdEnvVars
</IfDefine>
</Directory>
</IfModule>
<IfModule mod_proxy.c>
proxyRequests off
proxyPass /cust http://172.18.4.13:7778/cust
proxyPassReverse /cust http://172.18.4.13:7778/cust
proxyPass /ct http://172.18.4.13:7778/ct
proxyPassReverse /ct http://172.18.4.13:7778/ct
</IfModule>
#<IfModule mod_proxy.c>
# proxyRequests on
# proxyPass /ct http://172.18.4.13:7778/ct
# proxyPassReverse /ct http://172.18.4.13:7778/ct
#</IfModule>
# Include the configuration files needed for jserv
include "/oraapp/9iAS10220/home/Apache/Jserv/etc/jserv.conf"
ApJServMount / /ct
AddType text/jsp .jsp
AddHandler jserv-servlet .jsp
# Include the Oracle configuration file for custom settings
#include "/devl/ics3/devl/apache/oracle_apache.conf"
<VirtualHost 172.18.4.13:80>
ServerName ics3dv1ws1.hq.bradgroup
DocumentRoot /devl/ics3/devl/webroot/apache
ServerAlias www.ics3dv1ws1.hq.bradgroup
</VirtualHost>
# <VirtualHost 172.18.4.13:80>
ServerName %1.collectiblestoday.com
VirtualDocumentRoot /devl/ics3/devl/webroot/oc4j/ct/web
# </VirtualHost>Weird ... that works.
So, I created the dummy account which was also failing as follows:
create user newuser identified by oracle;
grant developer_role to newuser;This fails, but only from a Form running under OC4J, until I run:
ALTER SYSTEM SET sec_case_sensitive_logon = FALSE scope = MEMORY;While I've made this change in our development database, I don't really want to do the same eventually in PROD. I'd rather figure out what's changed about how OC4J connects, find a rememdy there, and set this back to TRUE.
Since I didn't create the username or password as a string literal (to ensure lowercasing), I'm confused as to what's happening. When the init parm is set to TRUE, when the dialog box pops up for the form after the invalid username/password error, I tried entering the password in all lowercase, and then in all uppercase, to no effect. Both fail.
--=Chuck -
Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe
Hi
I have created a sample Fusion Web Application(ADF) and created a test.jsp in viewcontroller with few components. I have started the integrated weblogic server and started successfully, but when I run test.jsp it is giving me the below error
Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe" (in directory "C:\Documents and Settings\chowdamr\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.jdeveloper\DefaultWorkspace"): CreateProcess error=267, The directory name is invalid.
Initially this page is working successfuly.
Please tell me whats the problem.
Edited by: 858782 on May 13, 2011 5:28 AMThere are some problems when JDev's system directory (e.g. the \system11.1.1.4.37.59.23 directory) is in a path that contains spaces (as it is in your case - C:\Documents and Settings\...). Move the system directory to a path without spaces and try again. The simplest way to move it is to start JDeveloper in a "single user" mode (use <tt>jdeveloper.exe -singleuser</tt>) which will create the system directory within JDev's home directory. Of course, if your JDeveloper is installed in a path containing spaces, it will not work either (for example, if JDev is in C:\Program Files\...).
Have a look here for a more sophisticated approach for moving the system directory to another location:
http://technology.amis.nl/blog/8387/change-the-jdeveloper-system-directory
Dimitar -
Error: cannot access class oracle.jsp.runtime.HttpJsp; file oracle\jsp\runtime\HttpJs
Hello,
where is now oracle\jsp\runtime\HttpJsp.class located?
thanks.
Oleg.Same problem,
Error: cannot access class oracle.jsp.runtime.HttpJsp; file oracle\jsp\runtime\HttpJsp.class not found
Thanks
aldo -
Running JSP applications on Oracle iAS (release 1.0.0.0.0) on HP unix
Does anyone know how to run JSP applications on iAS (1.0.0.0.0) on Unix ? I want to know where to put all the .jsp, .jar, .class, .gif, .html files and how to configure ? If someone knows of any document on Metalink please pass me the doc id asap.
ThanksThis will depend on what specific JSP features you are using - you could look at installing OC4J standalone (install into a separate directory as it will not impact any existing Oracle installation).
-
Firefox 12 cannot runs my oracle forms..
sir
firefox 12 cannot runs my oracle forms..
i am using oracle 10g and jre 6 instead of jiniator 1.13
how can run oracle forms 10g with with firefox or google chroome plz solve this with detail...You are asking this question quite often...Why not just follow up one of your threads as they obviously are about running forms with firefox?
Anyway; to sum it all up, in order to get firefox running you need to configure the sun java plugin which you already did: http://www.oracle.com/technetwork/developer-tools/forms/documentation/forms-jre-131772.pdf
Then you need to set the jpi_mimetype in your formsweb.cfg accordingly to the version of the jpi you installed. If you want to start forms with any java plugin just change it to
jpi_mimetype=application/x-java-appletcheers -
Why Other Browser cannot run oracle forms without IE.
Why Other Browser cannot run oracle forms without IE.
i want to use other browser for oracle form like firefox,google chrome etc not IE.
[email protected]Hussain Afridi wrote:
Why Other Browser cannot run oracle forms without IE.Let aside we don't know what forms version you are using, your statement is simply wrong. I am running Forms 10gR2 with Firefox for quite some time (from 2 to 12 and now with 10.0.7 ESR). So I know for a fact that you can run Forms with other Browsers then IE. Also why would Oracle certify other Browsers (which they did) if it wouldn't work in the first place?
So to answer your "question": forms most certainly won't work on FF on your side because you didn't configure your formsweb.cfg properly. For newer Versions of Fírefox you'd have to use the Sun JPI instead of JInit:
http://www.oracle.com/technetwork/developer-tools/forms/documentation/forms-jre-131772.pdf
Also if you'd have used the forum search it would have come up with some informations on what to do; e.g.
Running Oracle Forms applications using Firefox 3.6
So to sum it up you should reprhase your original question to:
How do I use the forum search/google to search for informations already provided a hundred times?cheers -
Error Message: JBO-25009: Cannot create an object of type:oracle.jbo.domain
Hi, When im giving a default value to a date column in the attribute settings i get this error when im running my jsp page (bc4j web application):
Error Message: JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value: 31-dic-2099
How can i fix that? I�ve already trying all possible date formats.
ThankuThe default format for Date (oracle.sql.DATE which is the superclass of oracle.jbo.domain.Date) is yyyy-mm-dd.
-
Java.io.FileNotFoundException when running jsp
hi,all.i'm using jdev 10.1.3,migrated from 10.1.2.
when i built a new application,application template is "Web Application[JSF ADF BC]",and build a new jsp(wrote nothing),then run this jsp page,embedded OC4J Server panel prompted:NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page. and error message:java.io.FileNotFoundException: D:\jdevstudio1013\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\default-web-app\dandee5-ViewController-context-root\qscover.jsp
what's wrong?tiaI'm having the same problem. The error is:
2006-03-10 08:54:37.425 NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : Exception:java.io.FileNotFoundException: C:\JDev10.1.3\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\default-web-app\partnerexpress-app\jsp\en\access\loginset.jsp (The system cannot find the path specified.
)2006-03-10 08:54:37.425 NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : Exception:java.io.FileNotFoundException: C:\JDev10.1.3\jdev\system\oracle.j2ee.10.1.3.36.73\embedded-oc4j\default-web-app\partnerexpress-app\jsp\en\access\loginset.jsp (The system cannot find the path specified.
We are migrating from 10.1.2 environment and 10.1.3 has 2 BIG problems!
1) You cannot run your applications under JDK 1.4 !!! Our production environment is 10.1.2 app server...this means we would have to build our apps in 1.4 yet be FORCED to develop in 1.5 in order to use OC4J. Not very backwards compatible.
2) The side application navigator is not very flexible. We cannot right click a file and refactor it for example add a new file or move files via drag and drop. In addition you can't rename a file easily...you have to go to the file menu.
Any solutions to these problems ? The JDK problem is a big one for anyone moving over
to this IDE.
Help!!
Gurinder -
Configuring Sun One Web Server 6.1 SP4 to run JSPs
I have a web application that uses HTML, Servlets, Javascript, and JSPs and accesses an Oracle 10g database. So far, I have configured the web server to run the HTML, Javascript, servlets, and Access the database. I have not been able to figure out how to execute the JSPs. I get an error stating the the JSPs cannot be compiled into servlets. My web browser displays a message indicating that this could be a misconfiguration of the web server. If anyone could provide some insight, I would greatly appreciate the help!
This is the entry in the Web Server error log:
[17/Mar/2005:14:55:55] failure (13130): for host 147.103.44.38 trying to GET /SI/NewSIForm.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSP /opt/SUNWwbsvr/https-fredricksburg/ClassCache/https-fredricksburg/default-webapp/_jsps/_SI/_NewSIForm_jsp.java:11: 'class' or 'interface' expected import javax.servlet.*; ^ /opt/SUNWwbsvr/https-fredricksburg/ClassCache/https-fredricksburg/default-webapp/_jsps/_SI/_NewSIForm_jsp.java:12: 'class' or 'interface' expected import javax.servlet.http.*; ^ /opt/SUNWwbsvr/https-fredricksburg/ClassCache/https-fredricksburg/default-webapp/_jsps/_SI/_NewSIForm_jsp.java:13: 'class' or 'interface' expected import javax.servlet.jsp.*; ^ /opt/SUNWwbsvr/https-fredricksburg/ClassCache/https-fredricksburg/default-webapp/_jsps/_SI/_NewSIForm_jsp.java:14: 'class' or 'interface' expected import org.apache.jasper.runtime.*; ^ 4 errors at org.apache.jasper.compiler.Compiler.compile(Compiler.java:312) at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:764) at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.access$000(JspServlet.java:624) at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:401) at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:363) at javax.servlet.http.HttpServlet.service(HttpServlet.java:908) at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509) at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161) at com.iplanet.ias.web.WebContainer.service(WebContainer.java:578) -
hello, guys. i cannot run eclipse on my federa core 3. it says that the program cannot display
I am not sure about jserv but Apache Tomcat is all you need to serve html/jsp/servlets. Here is the link to the Tomcat site...
http://jakarta.apache.org/
Zac -
Problem in configuring my Laptop to run JSP files
I am having problem in testing my finished JSP files in my laptop. Everytime I run my JSP, it continues requesting for internet connections. It cannot run in an offline modus. I am using Mindows 2000, JDeveloper 3.2.3 and Oracle 9i database.I installed IIS(Internet Information Server). I need urgent help because of my school presentation.
Hi,
Please check this link and follow the guide to configure exchange online account to your IPhone:
https://support.office.com/en-SG/Article/Set-up-email-on-Apple-iPhone-iPad-and-iPod-Touch-b2de2161-cc1d-49ef-9ef9-81acd1c8e234
Since this forum is for general questions and feedback related to Office for windows, if you need further assistance on this issue, you can post in the following forum:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
The reason why we recommend posting appropriately is you will get the most
qualified pool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Error Running Reports as Portlet in Oracle AS 10g
#First, I create the report server using Reports Server Access Portlet (Administration> Oracle Reports Security Setting)
When defining the Server Name and Printers, I fill the fields like this:
Display Name : MY_REPORTS_SERVER
Reports Server Name : myserver
Oracle Reports Web Gateway URL for JSP reports : http://stts:7778/
Oracle Reports Web Gateway URL for RDF reports : http://stts:7778/reports/rwservlet
#Second, I create the report definition using Reports Definition File Access portlet
Display Name : myreport
Reports Servers : MY_REPORTS_SERVER
Oracle Reports File Name : test.rdf (default report sample)
Execute : via servlet
#The problem is.....
When I tried to run the report by clicking Run / Run as Portlet link, the report doesn't show up.
Then, I rightclick-View Page Source on the page
<iframe name="iFramePortlet"
src="http://sttsstts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach....
I found that the src tag is doubling my computername into sttsstts, it supposed to be stts only.
How come this happen???
I already tried to change server definition into
Oracle Reports Web Gateway URL for JSP reports : http://localhost/
Oracle Reports Web Gateway URL for RDF reports : http://localhost/reports/rwservlet
but the when tried to run the report again, the src still added by computername become:
src="http://localhoststts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach............
plaease help me...
Thanx before,
ChrisHi,
I found two Metalink Notes that could of use to you :-
Metalink Note:230544.1 :- How To Install And Configure OSA AS Portlets (Main Document)
Metalink Note:247595.1 :- Installing AS Portlets 1.0 with OFA or OSA Version 6.4
Regards,
Sandeep -
Cannot run application HRSystem due to error deploying to DefaultServer.
I am new to java and jdeveloper. I am tring my hands on the tutorial on HRSystem. Below is the error message recieved while deploying the application. Dont know what to do please help.
The plaform is linux. Thanks
DefaultServer startup time: 12661 ms.
DefaultServer started.
[Running application HRSystem on Server Instance DefaultServer...]
Uploading credentials.
---- Deployment started. ---- Jun 2, 2009 3:10:10 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-06-02 15:10:10.73: Writing WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:10.973: Wrote WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:57.397: Writing EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
2009-06-02 15:10:57.404: Wrote EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
Deploying Application...
<Jun 2, 2009 3:10:59 PM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HRSystem is not versioned.>
Jun 2, 2009 3:10:59 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
Jun 2, 2009 3:10:59 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
<Jun 2, 2009 3:11:22 PM CET> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
Jun 2, 2009 3:11:22 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Jun 2, 2009 3:11:22 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1243951858599' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'HRSystem'.>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application HRSystem on DefaultServer.: Failed to load webapp: 'HRSystem-ViewController-context-root'.
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
#### Deployment incomplete. #### Jun 2, 2009 3:11:22 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application HRSystem due to error deploying to DefaultServer.
[Application HRSystem stopped and undeployed from Server Instance DefaultServer]
Edited by: user1423903 on Jun 2, 2009 8:11 AMTry removing this directory: /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/ and restarting JDeveloper.
-
Cannot run application handbook due to error deploying to IntegratedWe
I recently upgraded to Developer version 11.1.2.38.60.81 and when I try to run my test template from the handbook built under a previous version I get the following:
<Sep 29, 2011 6:26:38 PM MST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Owner\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\handbook\ModelWebApp.war. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
<Sep 29, 2011 6:26:38 PM MST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1317345997673' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'handbook'.>
<Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
#### Cannot run application handbook due to error deploying to IntegratedWebLogicServer.
[06:26:39 PM] Deployment cancelled.
[06:26:39 PM] ---- Deployment incomplete ----.
[06:26:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
[Application handbook stopped and undeployed from Server Instance IntegratedWebLogicServer]
I have read thru the other threads but have not found an aswer; can someone help?Thanx for your reply. I am very appreciative that you and others take the time to reply. I follow your blog and hope to become more proficient in JDeveloper.
Maybe you are looking for
-
How to download data in Predefined excel template from WAD
Hi, I want to download the data from WAD link to a pre defiend excel file. The excel file has all the info objects used in the Query and the placement of the colums is also as per WAD report. Kindly suggest me if there is some way to achieve t
-
i have a lexmark wireless printer, its connected to my imac via wireless bthome hub connection, works fine, so does my pc laptop. but when it comes to connect my macbook pro aswell it wont work. i have installed lexmark drivers on macbook, i have f
-
Issue with customer_exit related with dynpros
Hi Everyone, I need to add a validation in a customer_exit. The transaction is LM07 and customer_exit is LLMGTU01/EXIT_SAPLLMGT_001/ZXMOBU09. This transaction uses two screens, one source (SAPLXLRF-0212) and one destination (SAPLXLRF-0312). Therefore
-
Home directory permissions help
Two questions: 1) the default permissions for my account appears to be set to give me Read & Write permissions, and all others get Read Only? I'd like the default to be that all others get None as a default - do I use the umask command to do this, an
-
Mail doesn't open/download immediately
Is it normal to have incoming mail take awhile to open up? The "loading" message comes on and runs for 10 seconds or more and the email does not appear immediately.