Cannot run Oracle XE installer after downloading

I've tried the download on two different machines with both IExporer and Firefox browsers. Get the same message: Error reading setup initialization file.

Hello,
I ran into the same problem. As written in http://support.softartisans.com/kbview_971.aspx it seems to be a problem with the download itself!
The filesize of the downloaded file has not the same size as stated on the oracle page.
I tried it with different browsers, from different locations (home, office) without success.
Sometimes the download is finished with ~80MB, sometimes already with 36MB.
Using a download manager (e.g. GetRight) solved the issue!
Message was edited by:
user459902

Similar Messages

Getting error while running Oracle universal installer to run the deinstall

I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?

This is regarding an issue while trying to unistall Fusion middleware (11g forms, reports) from the server.
I am running oracle universal installer to run the deinstallation process and getting an error "java runtime environment was not found at C:\TEMP\OraInstall2011-11-14_01-31-42PM\jre\bin\javaw.exe hence oracle universal installer cannot be run. Please visit www.javasoft.com and install jre 1.3.1 or higher and try again"
Is there any workaround for this?

Cygwin X Server to run Oracle Universal Installer

Hi,
I used to run Oracle Universal Installer on my unix server using an Exceed X Server on my Windows laptop. Recently my laptop was upgraded to Windows 7 and I can no longer use my version of Exceed on this version of Windows.
Therefore I was going to try and use the freeware Cygwin X Server on my laptop instead.
I connected to the Cygwin X Server site http://x.cygwin.com/ - I wasn't sure what to download, so I downloaded the following using their setup.exe program ( which gets downloaded to my windows pc )
- X Console
- Xhost
- Xinit
- Xorg Server
- XTerm
Q1. In order to run the Oracle OUI, I am not sure I needed anything other than Xorg Server - is that correct ? I am not really sure what the others do
Q2. I was surprised when I downloaded these components they were supplied as packages with an extension of *.tar.bz2. To me these are components you would not / could not install onto a windows pc ?
All I am simply trying to is - to run an X Server solution ( in this case I was hoping Cygwin ) on my pc, set the $DISPLAY ( as approrpiate ) on my backend unix server, launch the OUI on the unix server and have the OUI appear on the X Server running on my pc.
But alas I am a bit stuck around getting the correct Cygwin X Server solution for my pc
Any ideas where I am gong wrong ?
thanks,
Jim

Jimbo wrote:
Hi,
I used to run Oracle Universal Installer on my unix server using an Exceed X Server on my Windows laptop. Recently my laptop was upgraded to Windows 7 and I can no longer use my version of Exceed on this version of Windows.
Therefore I was going to try and use the freeware Cygwin X Server on my laptop instead.
I connected to the Cygwin X Server site http://x.cygwin.com/ - I wasn't sure what to download, so I downloaded the following using their setup.exe program ( which gets downloaded to my windows pc )
- X Console
- Xhost
- Xinit
- Xorg Server
- XTerm
Q1. In order to run the Oracle OUI, I am not sure I needed anything other than Xorg Server - is that correct ? I am not really sure what the others do
Q2. I was surprised when I downloaded these components they were supplied as packages with an extension of *.tar.bz2. To me these are components you would not / could not install onto a windows pc ?
All I am simply trying to is - to run an X Server solution ( in this case I was hoping Cygwin ) on my pc, set the $DISPLAY ( as approrpiate ) on my backend unix server, launch the OUI on the unix server and have the OUI appear on the X Server running on my pc.
But alas I am a bit stuck around getting the correct Cygwin X Server solution for my pc
Any ideas where I am gong wrong ?
thanks,
JimAs sb alluded to by giving a link to the site, you can use xming as your x-server. It's free, lightweight, and drop-dead simple to install. No bells and whistles. Just a solid x-server.
And once I discovered x11 port forwarding, I no longer even have to set DISPLAY to match the ever-changing DHCP-assigned ip address of my pc. I use PuTTY as my ssh client, and configure the session to allow x11 port forwarding. I can't remember the last time I had to monkey around with DISPLAY.

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you :)

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you

If you factory reset, it wont make the update go away, but you should back up and reset before you install the update.

I cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.

i cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.

Hello nguyendexter2012,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Best of luck,
Mario

Why Other Browser cannot run oracle forms without IE.

Why Other Browser cannot run oracle forms without IE.
i want to use other browser for oracle form like firefox,google chrome etc not IE.
[email protected]

Hussain Afridi wrote:
Why Other Browser cannot run oracle forms without IE.Let aside we don't know what forms version you are using, your statement is simply wrong. I am running Forms 10gR2 with Firefox for quite some time (from 2 to 12 and now with 10.0.7 ESR). So I know for a fact that you can run Forms with other Browsers then IE. Also why would Oracle certify other Browsers (which they did) if it wouldn't work in the first place?
So to answer your "question": forms most certainly won't work on FF on your side because you didn't configure your formsweb.cfg properly. For newer Versions of Fírefox you'd have to use the Sun JPI instead of JInit:
http://www.oracle.com/technetwork/developer-tools/forms/documentation/forms-jre-131772.pdf
Also if you'd have used the forum search it would have come up with some informations on what to do; e.g.
Running Oracle Forms applications using Firefox 3.6
So to sum it up you should reprhase your original question to:
How do I use the forum search/google to search for informations already provided a hundred times?cheers

Pb running Oracle Universal Installer on Linux

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
When I run the runInstaller for the iASv2linux.cpio.gz file, I have the following error :
"An error occured while trying to determine the Running process"
"Oracle9iAS installation has detected that the Entreprise Manager Website is running on this system. Install cannot continue unless the Entreprise Manager Website is shut down ..."
So, there 's no oracle process on my server, and when I try to stop it with emctl stop, I have a "connection refused".
Thank you for you help.
Patrick.

Hi there!
For a lot of RedHat/Oracle Configuration issues you may want to refer to http://www.puschitz.com/ .
I had the same problem on SuSE Linux 9.1 installing Oracle 9i and they cause some headaches. If I remember correctly, it boils down to:
- export LD_ASSUME_KERNEL=2.4.1
- install compatibility libraries, then runInstaller
- [I had Oracle 9.2.0.1]: ignore the linking errors (or try to fix them by running the makefiles on the command line, i.e. make -f ins_rdbms.mk install)
- install the latest patch from metalink
- Linking should now succeed
Hope that helps,
Martin

Cannot connect to app store after downloading mountain lion

cannot connect to app store after installing mountain lion it says there is no network connection when there clearly is i am on the internet now and i had this problem with the bootcamp server i read that in another forum and the answer to remove the auto proxy setting was correct but not for this situation because it is allready unchecked i checked it and tried again still no connection please help .... oh and apple you are beginging to be more like windows/microsoft with all the problems

That poor wordpress site has collapsed in exaustion from trying to keep up with the 3mil hits a day
here is a "copied" version with credits for those looking for a solution to an annoying problem Apple should patch. (Yes, I'm aware of the irony of that statement)
July 18, 2012 · by Arthur Lockman · in Apple, Tutorials
After doing a reinstall of Lion a few weeks ago, I found that my computer suddenly would reject every VeriSign certificate that it encountered. Using Chrome, that meant that I couldn’t even access Twitter.com, because it thought that the certificate was wrong. I couldn’t login to the Apple developer portal, I couldn’t authenticate a device with XCode, I couldn’t make a purchase at Apple.com, I couldn’t download updates from the Mac App Store, and I couldn’t login to Mint.com, among other sites. I essentially couldn’t do anything that used a VeriSign certificate for SSL.
What did I do? I called my trusty AppleCare advisor, hoping for an answer. I thought that maybe they could help me figure it out. After getting to senior support, I was told to reinstall Lion, which I did to no avail. My case was then forwarded to the Apple engineering team, with 3 to 5 days to wait until I had an answer. I looked around, through my console logs and through Keychain access, and finally came up with an answer, and a solution to my problems.
It turned out that my solution was pretty simple. I had to delete a few files and reset one to its default setting.
Delete the files /var/db/crls/crlcache.db and /var/db/crls/ocspcache.db. These can be found using Finder’s Go >; Go To Folder menu (Cmd + Shift + G). This resets the cache of accepted certificates in the system. It doesn’t remove them, it just forces the system to rebuild the caches upon restart.
Open Keychain Access (/Applications/Utilities/Keychain Access). Select Certificates in the Category picker on the left side. In the search bar, type in the word Class. Look through that list, and find any certificates that have a blue + symbol over their icon. These are the ones you need to modify.
Select one that has a blue +, and hit Command + I. Click the disclosure triangle beside the “Trust” list to show the list of permissions. Now, what we need to do is to set this certificate to use the system defaults. However, for some reason, when you select it, it doesn’t save. So what you need to do is this. Under “Trust”, where it says “Secure Sockets Layer (SSL)”, change the dropdown menu to say “No Value Specified”. Then, close the window. It will ask for your administrator permissions. Then, open the info pane for that certificate again. Under “Trust” again, now set the dropdown that says “When using this certificate:” to say “Use System Defaults”. You can then close out of the info pane, and enter your password again. Do this for any of the certificates that have a blue + on their icon. There should only be one or two at most.
Restart your system.
This solution seemed to work just fine for me. All of my certificate problems have been fixed. It must be something with the OSX installer that causes this certificate issue. I’ll file a bug report. Hopefully someone looks into it and fixes the flaw in the OS. And, I hope that this fixed the flaw for you.
Addendum – a note on security:
This procedure won’t affect the security of your Mac. I’ve had some questions come in about that, and if anything, it makes it more secure because then sites that require SSL certificates can actually use them, unlike before where they might default to non secure connections because the certificate was bad.

Oracle9i installation after download

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename setup.exe
- Date/Time
- Browser + Version
- O/S + Version windows 2000 pro
- Error Msg jave run time not found
I downloaded the zip files successfully, then went to install the database as per instructions. I get error message that java runtime is not found. I assumed that if the jave runtime was required, that Oracle would install it as part of the process. I went to Sun's site and downloaded the latest version, but Oracle still will not find it. Am I doing something incorrect here?

Me too!
I need to evalute this product for my company,
but I not able to complete the installation of
Oracle Portal.
Patches are required but not available!
========================================
Very strange!!!
Can you help me?
Thanks
Pietro Testa
Knowledge Management and Operations Efficiency
Genuity
9 Rue Maurice Mallet
92130 Issy les Moulineaux - Paris (France)
tel : +33 1 58 04 22 27
fax : +33 1 58 04 21 02
mobile: +39 335 77 033 13
[email protected]
www.genuity.com
Baveno
Via Torino, 2
28042, Baveno VB - Italy
tel : +39 0323 922.066

Cannot open Lightroom on iMac after download of OS X Yosemite

After downloading Yosemite on iMac I cannot open Lightroom files. I am getting the message "The Lightroom catalog cannot be used because the parent folder “/” does not allow files to be created within it."
Can somebody help me please.

Here are some start up commands you might like to try Startup key combinations for Intel-based Macs - Apple Support
Personally I would try in Recovery mode...OS X: About OS X Recovery - Apple Support

Problem with battery running down more quickly after downloading OS6 to 3GS iPhone

Problem with battery running down more quickly after I downloaded OS6 to 3GS iPhone.

gdgmacguy
I guess I should have asked for the "definitive" fix. I read several "fixes" but it seems no one knows if Apple has a definitive fix. Kind of like going into an Apple store and getting three different answers from three different reps. At least they are not rude and no, I don't have a problem searching the forum.
<Edited by Host>

Cannot open netflix on ipad after downloading ios7

Netflix will not open on ipad after downloading ios7

You have to go to settings, safari, and accept cookies from third parties and advertisers or always accept cookies.. After all day yesterday trying various techniques I stumbled upon the answer when I couldn't open itunes either. Before ios 7 I had my cookie settings in safari to always block cookies and netflix worked fine. After installing ios 7 I couldn't open netflix. I then couldn't open itunes. Once I went to safari in settings and allowed cookies from third paries and advertisers, netflix and itunes opened fine.

MacAir running a lot slower after downloading Mountain Lion, has any one else experienced this

Since downloading Mountain Lion, my MacbookAIr runs more like Windows, slow to download.

Someone mention the 'indexing' on another thread, which pertain to a fan issue. But that when you update to a new OS the indexing can take hr.s My point, perhaps that is causing the sluggishness. And the simple answer is, downgrade Safari, if you still have problems with 6. And wait and see if this get's mention a lot and then perhaps Apple does an update to address it.
I'm running it now with Lion, and I did not notice any speed diiference from 5. All I see are new added or deleted features and a few shuffles of this, that and the other. When I hear people get into the forever browser wars, about rendering/speed ect. it's in my opinion more on a person like then actual numbers. And even the numbers can be missleading.
Look at Chrome, sure it's fast, but no one looks behind the scene. It eats up resources as more tabs are open. And while the downloaded file may seem lite at 23 mb, after installation it is as big as Safari. Safari is just up front about it. Even F.F. is over 35 mb after instalation. And their memory leaks are as big as the grand canyon.
Hang tuff, somebody will figure something out if it's a wide spread issue. If not there has to be something then on your machine that is causing the friction, some hiderance. And quite possibly as simple as changing a preference.

Oracle New Installation after DST

Hello,
I want to install Oracle database 10g R2 on Windows (2K or 2K3). I have the installation CD which I got long before March 10nth 2007(DST 2007). If I install database now what are the patches I need to apply to make it compliant with DST 2007 issues.
Can I download the latest release of Oracle so that no need to worry about any patches.
Please advice.
Thank you,

I would say the "offset weeks" are now over, but I still seem to have problems getting a fresh installation of Oracel 10g (10.2.0.3) to run silently. I have been going through so many documents on the DST changes that I am afraid I may have mixed things up. This is what I do and I would appreciate any help on where I go wrong:
1. Install Windows Server 2003 SP2 (32-bit) in time zone GMT-8.
2. Install Oracle 10.2.0.1 using the -silent option and a response file (no starter database).
3. Install Oracle 10.2.0.3 Patch set using the -silent option and a response file (catupgrd.sql not run since no databases exists).
4. Copy DST V4 timezone files from Oracle 10.2.0.3 Patch 1: 5731535 to Oracle Home.
5. Apply JVM DST update (5865568 - UPDATE TO JVM TIME ZONE CLASSES NEEDED).
6. Use NetCA and DBCA to silently create listener and database.
I am now waiting for the EMAgent to start which it fails to do. The emdb.nohup has the following information:
----- Tue May 1 10:16:25 2007::D:\OHOME1\<HOST>.<DOMAIN>_<INSTANCE>/sysman/config/emd.properties copied to D:\OHOME1\<HOST>.<DOMAIN>_<INSTANCE>/sysman/config/emd.properties.2007-05-01-10-16-25 while updating the property 'agentTZRegion' -----
----- Tue May 1 10:16:25 2007::An agentTZregion of '-08:00' is installed in D:\OHOME1\<HOST>.<DOMAIN>_<INSTANCE>/sysman/config/emd.properties. -----
----- Tue May 1 10:16:26 2007::The agentTZRegion value in D:\OHOME1\<HOST>.<DOMAIN>_<INSTANCE>/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script 'mgmt_target.set_agent_tzrgn' to get the value propagated to repository -----
How do I make this step succeed in an automated way? Am I missing any patches or did I just misread how these patches should be applied?
Note: The above steps work perfectly if the machine is in a GMT+1 time zone.
Thanks,
RH

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

Cannot run Oracle XE installer after downloading

Similar Messages

Maybe you are looking for