Cannot run permissions

My mate has a little ol powerbook g-4. was running 10.3.9, loaded leopard. Now, no Iphoto and cannot run permissions from powerbook or disc, any ideas?
Gary

Gary,
It sounds like your mate did an Erase & Install.
This will delete iPhoto and iPhoto is not included on the Leopard disk.
You will have to reinstall iPhoto from the original disks that came with your computer.
What is the Disk Utility and Repairing Permissions problem?
"cannot run permissions from powerbook or disc, any ideas?
Not sure if you are getting errors or what.
Disk Utility takes anywhere from 15 minutes to 1 hour to repair permissions in 10.5.1
Let it run.
It will always say "Less than a minute" but this is NOT true.
Again, let it run.
   Joseph Kriz

Similar Messages

  • Beehive Conferencing Java-based Client Error: Cannot grant permissions to unsigned jars

    Hi,
    When I start a Beehive online web conference via the Java-based client on Ubuntu 12.04, I get the following error:
    net.sourceforge.jnlp.LaunchException: Fatal: Initialization Error: Could not initialize application.
        at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:778)
        at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:552)
        at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:889)
    Caused by: net.sourceforge.jnlp.LaunchException: Fatal: Application Error: Cannot grant permissions to unsigned jars. Application requested security permissions, but jars are not signed.
        at net.sourceforge.jnlp.runtime.JNLPClassLoader.setSecurity(JNLPClassLoader.java:289)
        at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:209)
        at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:323)
        at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:770)
        ... 2 more
    Caused by:
    net.sourceforge.jnlp.LaunchException: Fatal: Application Error: Cannot grant permissions to unsigned jars. Application requested security permissions, but jars are not signed.
        at net.sourceforge.jnlp.runtime.JNLPClassLoader.setSecurity(JNLPClassLoader.java:289)
        at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:209)
        at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:323)
        at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:770)
        at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:552)
        at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:889)
    Thanks for your help

    We have an HTTP/HTTPS conflict when downloading the JavaFX client that we have not yet been able to resolve without breaking something else :-)
    We recommend you use the downloadable client - available from the https://beehiveonline.oracle.com/bcentral/action?page=downloadlanding&appId=Oracle+Beehive+Conferencing+Bootstrap%7Cwind…

  • CRS-1019 Resource ora.devdb.devdb1.inst (application) cannot run on rac2

    I run a CRS upgrade from 10.2.0.1 to 10.2.0.3. The process runned ok but instance devdb1 on rac1 of the RAC does not start.
    crs_stat -t
    ora.devdb.db ONLINE ONLINE rac1
    ora.devdb.devdb1.inst ONLINE OFFLINE
    ora.devdb.devdb2.inst ONLINE ONLINE rac2
    I tried the following, without success:
    srvctl remove database -d devdb -f
    crs_unregister ora.devdb.db
    srvctl remove instance -d devdb -i devdb1
    srvctl remove instance -d devdb -i devdb2
    srvctl add database -d devdb -o $ORACLE_HOME
    srvctl add instance -d devdb -i devdb1 -n rac1
    srvctl add instance -d devdb -i devdb2 -n rac2
    srvctl stop database -d devdb
    srvctl start database -d devdb
    When I run:
    srvctl start instance -d devdb -i devdb1
    PRKP-1001: Error starting instance devdb1 on rac1
    CRS-0215 Could not start resource 'ora.devdb.devdb1.inst'
    When I run:
    crs_start ora.devdb.devdb1.inst
    Attempting to start 'ora.devdb.devdb1.inst' on member 'rac1'
    Start of 'ora.devdb.devdb1.inst' on member 'rac1' faileld.
    rac2: CRS-1019 Resource ora.devdb.devdb1.inst (application) cannot run on rac2
    CRS-0215 Could not start resource ora.devdb.devdb1.inst
    When I run on rac1 as oracle:
    sqlplus /nolog
    conn / as sysdba
    startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/01/app/oracle/product/10.2.0/db_1/dbs/initdevdb1.ora'
    Does anyone have some tips to help?
    Regards
    Cristian

    Hi Cristian,
    Maybe you have already solved your issue.
    Have you checked if the necessary pfile (initdevdb1.ora) is in the directory /01/app/oracle/product/10.2.0/db_1/dbs? if it is there then you might need to check the permissions on the path.
    I suppose you did the upgrade using a new binary home for your 10.2.0.3 version where the required parameter file(s) is/are still there in $OLD_ORACLE_HOME/dbs.
    If so, then copy them from there to the new $ORACLE_HOME/dbs then give it a try.
    Hope this helps.
    Regards,
    Jozsef

  • Cannot run xorg as non-root

    I have a fresh install of Arch Linux that is working great except I cannot run xorg as my normal login, only root.
    When I attempt to start X with either startxfce4 or startx, I get
    xf68openconsole: cannot open virtual console 1 (permission denied)
    XFCE is installed and works fine as root. I've done a lot of searching and I've found a lot of other people having this problem but none of their solutions have worked for me. I tried reinstalling xorg, checking my user permissions (I'm in the wheel group), and adding vt$XDG_VTNR to the end of my xserverrc file.
    I haven't used arch in a long time (before systemd) and I feel like a rank newbie! Nothing I have read suggests any need for permissions changes when installing X so I don't know why it's not working out of the box. I feel like it must be an obvious answer but I need someone to slap me in the face with it, obviously.
    Appreciate any help in advance-

    karol wrote:
    Post your ~/.xinitrc and the exact command you use e.g. 'startx' or 'startx -- :1 vt$XDG_VTNR -keeptty' etc. Make sure e.g. 'startx' is not aliased to something.
    Have you tried starting it from another tty? Do you run the stock linux console in the tty or e.g. tmux?
    Post the output of
    uname -a
    What's your hardware and graphics drivers?
    xinitrc here
    I am using startxfce4:
    [root@ninja-laptop /]# type startxfce4
    startxfce4 is /usr/bin/startxfce4
    I haven't made any changes to the console or tty so I'm assuming I'm running it in stock. I haven't tried starting from another tty.
    [root@ninja-laptop /]# uname -a
    Linux ninja-laptop 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64 GNU/Linux
    Thanks-

  • Cannot allow permissions for flash player

    For some reason I cannot allow permissions for the microphone and camera on certain websites where it asks me to allow/deny permissions. Im using firefox and i updated flash to the latest version but it still wont work.

    Do you already have an earlier Flash Player version installed?
    If so, please run the uninstaller from http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
    then try the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    [topic moved to Flash Player forum]

  • How do I install itunes on a windows 8 computer. I keep getting the message that the app cannot run on my computer.

    I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.

    Hi mlheidt,
    If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • App cannot run on Windows Server 2012 R2

    I have an application that runs well on Windows Server 2012. The application has two editions 32-bit and 64-bit, both are from the same code base.
    However, on Windows Server 2102 R2, the x64 version of the application works, but the 32-bit version does not run. Invoking the 32-bit of the application generates the "This app cannot run on you PC" message.
    I tried the compatibility troubleshooting, and it does not help.
    Any suggestion on what could be the problem?
    Thanks.
    jwang

    <moved from Downloading, Installing, Setting Up to Photoshop General Discussion>

  • After fresh installation on a new machine, my licensed copy of Adobe Encore CS6 "cannot run in non-royalty serialized mode."

    "The application needs to be serialized with a royalty bearing serial number."
    I have done everything recommended in all of the other threads relating to this issue  -
    Uninstalled the entire CS and used the Adobe cleaner tool  - to no avail.
    Uninstalled just Encore and re-installed, nothing.
    And multiple combinations of the above mentioned.
    Really need this to work, ASAP. We've tried to contact Adobe via phone, chat, and other means. They are very to receive an audience from, it appears. Can anyone offer a different solution?
    This is for a brand new edit suite that is running Windows 7 pro, 32 GB of RAM, and the [email protected] GHz.

    I did not see this earlier. Forums are a bit odd today.
    Do you  have a subscription (to the cloud) or is this a perpetual license? You cannot run Encore in trial mode.
    Generally, with CS6 suite (or earlier?) this indicated that Premiere is not activated, or there is a problem with activation. What version are you trying to install?
    Unfortunately, the link that tells you how to fix this went missing in action some time ago.

  • Cannot run workbook from desktop

    Greetings All,
    Discoverer version 10.1.2.0.2,
    Disco Admin has created business areas and workbooks. Admin has also shared workbook with a user. When user tried to run workbook user is not prompted for parameters. WHen user refreshes worksheet still not prompted for paramater and user gets a blank worksheet. Basically, cannot run any shared workbook.(NOTE: do not even get msg that query returned no data).
    When user tries to create a workbook by selecting items for a folder in business area, then again the same result - does not didplay any data (NOTE: do not even get msg that query returned no data).
    User has select from all tables priv.
    Any suggestion?
    JP.

    Hi,
    Does the workbook bring back data for any other user?
    Does this user have the Create/Edit query (Desktop/Plus privilege?)
    Thanks.

  • REP-1401: 'no_daysformula':Fatal PL/SQL error occured. ora-06503: PL/SQL : Functio returned without value. REP-0619: You cannot run without a layout.

    Hi everyone.
    Can anyone tell me what is wrong in this code below?
    Code:
    function NO_DAYSFormula return Number is
    begin
      IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
      AND :P_TO_DT<:MATURITY_DATE
      AND :ACCT_OPN_DT>:P_FR_DT
      THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
      ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
      AND :P_TO_DT<:MATURITY_DATE
      AND :ACCT_OPN_DT<:P_FR_DT
      THEN RETURN (:P_FR_DT-:P_TO_DT+1);
      ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
       AND :P_TO_DT>:MATURITY_DATE
       AND :ACCT_OPN_DT<:P_FR_DT
      THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
      END IF;
    END;
    It gets compiled successfully but when i run the report, i get 2 errors.
    Error 1:
    REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
    ora-06503: PL/SQL : Function returned without value.
    Error 2:
    REP-0619: You cannot run without a layout.
    Should i use only 1 return statement?
    Can i use as many return statements as i want?
    What is the exact mistake? Please let me know.
    Thank You.

    Let me clear you the first thing...
    If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
    REP-0619: You cannot run without a layout.
    So you just correct the function 'no_daysformula' .
    First of all you run the report without that formula column.
    If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
    As function will always return a single value, Check your formula 'no_daysformula' returns the same.
    declare a return variable say for example..
    DECLARE
    V_DATE DATE;
    BEGIN
    --YOUR CODE---
    RETURN V_DATE := (RETURN VALUE)
    END;
    Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
    If any Problem persists let me know
    Regards,
    Soofi.

  • TS1717 I tried to open iTunes but a box pops up.  In it is written "iTunes cannot run because some of its required files are missing.  Please reinstall iTunes."  I have done so a number of times but nothing is working.  How can I fix this problem?

    iTunes will not open because a dialog box pops up with "Itunes cannot run because some of its required files are missing.  Please reinstall iTunes.". I have done so a few times to no avail.  Any solutions for this problem?

    No you will not lose your content reinstalling iTunes.
    Do this:
    1: Download and run the Registry Cleaner of the free Ccleaner.
    http://www.piriform.com/ccleaner/download/standard
    2: Next follow this Apple document to un-install iTunes
    http://support.apple.com/kb/HT1923
    3: Just for good measure, run Ccleaner again
    4: Reinstall iTunes.
    5: Come back here and click my "Correct answer" button.

  • Cannot run more than one instance of a remote app in remote desktop services Server 2012

    All,
    I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done.  We may have 12 or more students accessing and trying to run the Olyvia application
    at any one time.
    All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time.  That is, when I start up "olyvia" on a Mac, it works great.  If I leave it up and running, and then try
    and start up "olyvia" on an iPad (using different accounts), I get the following error message:
    "Cannot run more than one instance of this program simultaneously.  Either the program is already running, or it has not been terminated completely."
    I need to understand the root issue.
    1.  Is this a licensing issue?  So, I need to add some CALs to the RDS server?
    2.  Is this a application issue with "olyvia"?  So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
    3.  Did I not "publish" the application correctly?
    4.  Is this happening because I followed the "quick start" guide?
    Appreciate any help I can get on this.  We have no problem getting CALs, I just need some help with the root issue.
    Thanks,
    Geoff Weatherford
    CVMBS, CSU

    Hi Geoff,
    Each application uses different techniques for determining if multiple instances are running.  If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
    In the best case you really should direct your question to the maker of Olyvia.  The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why?  Is it related to Licensing? 
    Compatibility?  If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
    -TP

  • Cannot run application HRSystem due to error deploying to DefaultServer.

    I am new to java and jdeveloper. I am tring my hands on the tutorial on HRSystem. Below is the error message recieved while deploying the application. Dont know what to do please help.
    The plaform is linux. Thanks
    DefaultServer startup time: 12661 ms.
    DefaultServer started.
    [Running application HRSystem on Server Instance DefaultServer...]
    Uploading credentials.
    ---- Deployment started. ---- Jun 2, 2009 3:10:10 PM
    Target platform is (Weblogic 10.3).
    Running dependency analysis...
    2009-06-02 15:10:10.73: Writing WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
    2009-06-02 15:10:10.973: Wrote WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
    2009-06-02 15:10:57.397: Writing EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
    2009-06-02 15:10:57.404: Wrote EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
    Deploying Application...
    <Jun 2, 2009 3:10:59 PM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HRSystem is not versioned.>
    Jun 2, 2009 3:10:59 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
    INFO: Cleaning up application state
    Jun 2, 2009 3:10:59 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
    INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
    <Jun 2, 2009 3:11:22 PM CET> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
    Jun 2, 2009 3:11:22 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
    INFO: Cleaning up application state
    <Jun 2, 2009 3:11:22 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1243951858599' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root''
    weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         Truncated. see log file for complete stacktrace
    java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         Truncated. see log file for complete stacktrace
    >
    <Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'HRSystem'.>
    <Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         Truncated. see log file for complete stacktrace
    java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         Truncated. see log file for complete stacktrace
    >
    [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application HRSystem on DefaultServer.: Failed to load webapp: 'HRSystem-ViewController-context-root'.
    weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
    #### Deployment incomplete. #### Jun 2, 2009 3:11:22 PM
    oracle.jdeveloper.deploy.DeployException
         at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
         at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
         at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
         at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
         at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
         at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
         at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
         at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
         at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
         at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
         at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
         at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
    Caused by: oracle.jdeveloper.deploy.DeployException
         at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
         at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
         ... 11 more
    Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
         at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
         ... 12 more
    #### Cannot run application HRSystem due to error deploying to DefaultServer.
    [Application HRSystem stopped and undeployed from Server Instance DefaultServer]
    Edited by: user1423903 on Jun 2, 2009 8:11 AM

    Try removing this directory: /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/ and restarting JDeveloper.

  • Cannot run application handbook due to error deploying to IntegratedWe

    I recently upgraded to Developer version 11.1.2.38.60.81 and when I try to run my test template from the handbook built under a previous version I get the following:
    <Sep 29, 2011 6:26:38 PM MST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Owner\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\handbook\ModelWebApp.war. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
    <Sep 29, 2011 6:26:38 PM MST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1317345997673' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root''
    weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         Truncated. see log file for complete stacktrace
    >
    <Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'handbook'.>
    <Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
         at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
         at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
         at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
         Truncated. see log file for complete stacktrace
    >
    #### Cannot run application handbook due to error deploying to IntegratedWebLogicServer.
    [06:26:39 PM] Deployment cancelled.
    [06:26:39 PM] ---- Deployment incomplete ----.
    [06:26:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    [Application handbook stopped and undeployed from Server Instance IntegratedWebLogicServer]
    I have read thru the other threads but have not found an aswer; can someone help?

    Thanx for your reply. I am very appreciative that you and others take the time to reply. I follow your blog and hope to become more proficient in JDeveloper.

  • #### Cannot run application Application1 due to error deploying to Default.

    Hi all,
    Now, I am studing ADF 11. When I run my application, I meet a problem:
    This problem, "can not run your application", I try to stop java, or rebuild, or clean my application... but not successfull
    *#### Cannot run application Application1 due to error deploying to DefaultServer.*
    *[Application Application1 stopped and undeployed from Server Instance DefaultServer]*
    *[Server Instance DefaultServer is shutting down.  All applications currently running will be terminated and undeployed.]*
    *[sending request to shutdown server...]*
    C:\oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\stopWebLogic.cmd
    Stopping Weblogic Server...
    But, If I remove adf 11 software, after that I install this software then okie, and I can run my application.
    Help me.
    thanks all

    Just for the record - my thinking is that there was an application deployed on the integrated server that was miss configured.
    Instead of removing the whole system directory - you could just remove the defaultServer subdirectory there.
    But even better would have been the option to remove the specific offending application see here:
    http://blogs.oracle.com/shay/2009/08/removing_applications_from_you.html

Maybe you are looking for