Cannot run TDR on 4500 VSS peer
Running cable diagnostics tdr on a linecard attached to the active supervisor works fine but when I try on a linecard in the peer chassis I get no output... am I missing something?
A workaround inspired by the configuration guide:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1-2/XE_340/configuration/guide/config/vss.html#wp1054558
Basically, find out the VSS virtual slot number of the peer supervisor by issuing the show switch virtual slot-map command, attach to that module using remote login module <number> and issue the usual cable-diagnostics commands from there.
Just sharing in case someone else comes across this problem.
Doesn't work - results aren't consistent with what's attached. Might be TAC time...
Similar Messages
-
How to replace bad sup in 4500 VSS cluster
I have a Supervisor 7-E on its way to replace a bad one in a 4500 VSS cluster that handles my executive row and I've just realized I only have the foggiest idea what config is required to make it join the VSS cluster.
I've looked and not found anything on point. Does anyone have a quick cheat sheet on how to do this?I actually was able to read between the lines of some different docs and came to the exact same conclusion. There is one BIG caveat that is not mentioned in your document and that is licensing.
First, Cisco TAC is totally ill-equipped to understand how VSS affects commands output on the 4500 and was little to no help in the process. I figured out the other issues below on my own and basically told them what I needed
The RMA'd unit will not have the correct license on it, it will only have LAN base which does not support VSS
4500's are licensed per chassis, not per supervisor HOWEVER the supervisor(s) are where the license resides (on 4500 sup7/8)
The "show license udi" and "license install <location>" command only run on the active supervisor. There is NO WAY that I could find to update the license on the inactive supervisor. If you replace a chassis or supervisor and add it to the VSS cluster before doing licensing, you will have to reboot the current active chassis before putting the correct license on it
You are FAR better off getting the licensing straight before adding an RMA replacement supervisor/chassis added to the VSS cluster then after. -
NICDRV test04 fails saying driver cannot receive ICMP reply from the peer
Hi,
I am running NICDRV tests and while running test04 check multicast support, I fail with the error:
driver xxx cannot receive ICMP reply from the peer.COuld anyone tell me why is this happening?
For full report:
stdout| STRATEGY:
stdout| - Add multicast route and join multicast group
stdout| - Receive ip_multicast traffic from the client side
stdout| with 1 multicast group.
stdout| - Send ip_multicast traffic to the client side
stdout| with 1 multicast group.
stdout| - Join multiple multicast groups, and receive multicast
stdout| traffic of multiple groups from the client.
stdout| - For WiFi drivers, ping 224.0.0.1 multicast address for
stdout| 10 seconds and verify the traffic using snoop.
stdout|
stdout| TESTABILITY: implicit
stdout|
stdout| 192.168.11.10 is alive
stdout| 192.168.11.11 is alive
stdout| ping -i xxx -s 224.0.0.1
stdout| snoop -d xxx -o /tmp/snoop-multicast.tmp
stdout| sleep 10 seconds to collect packet
stdout| verify if driver igb can send multicast packet to the peer
stdout| 1 0.00000 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 1)
stdout| 2 0.99996 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 2)
stdout| 3 1.00000 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 3)
stdout| 4 1.00002 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 4)
stdout| 5 0.99997 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 5)
stdout| 6 1.00002 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 6)
stdout| 7 0.99999 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 7)
stdout| 8 0.99998 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 8)
stdout| 9 1.00002 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 9)
stdout| verify if driver xxx can receive ICMP reply from the peer
stdout| driver xxx cannot receive ICMP reply from the peer
Test_Case_End| 18498 tests/functional/test04/runme | FAIL | 11:44:29 80659327923251 0 |
Thkx,
RamWell, I finally figured it out. When trying to receive text messages from my iPhone pals, I would get a failure message and a suggestion to update my profile. When I selected that option, the phone would sit for a long time trying to connect and then fail. I went into my settings and was able to force an update. Lo and behold, all of the backed up text messages started to down load. It seems as though when I received the texts from my friends, the system was aware that I had not received then and they were held somewhere in the cloud. Then they were continuously resent until I fixed the problem at my end. They all downloaded over night and the problem has been resolved.
-
I cannot install itunes on my windows 8 computer. I get the message that the app cannot run on my computer.
Hi mlheidt,
If you are having trouble installing iTunes on your Windows 8 computer you may want to use the following article to help you get it up and running -
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks for using Apple Support Communities.
Best,
Brett L -
App cannot run on Windows Server 2012 R2
I have an application that runs well on Windows Server 2012. The application has two editions 32-bit and 64-bit, both are from the same code base.
However, on Windows Server 2102 R2, the x64 version of the application works, but the 32-bit version does not run. Invoking the 32-bit of the application generates the "This app cannot run on you PC" message.
I tried the compatibility troubleshooting, and it does not help.
Any suggestion on what could be the problem?
Thanks.
jwang<moved from Downloading, Installing, Setting Up to Photoshop General Discussion>
-
"The application needs to be serialized with a royalty bearing serial number."
I have done everything recommended in all of the other threads relating to this issue -
Uninstalled the entire CS and used the Adobe cleaner tool - to no avail.
Uninstalled just Encore and re-installed, nothing.
And multiple combinations of the above mentioned.
Really need this to work, ASAP. We've tried to contact Adobe via phone, chat, and other means. They are very to receive an audience from, it appears. Can anyone offer a different solution?
This is for a brand new edit suite that is running Windows 7 pro, 32 GB of RAM, and the [email protected] GHz.I did not see this earlier. Forums are a bit odd today.
Do you have a subscription (to the cloud) or is this a perpetual license? You cannot run Encore in trial mode.
Generally, with CS6 suite (or earlier?) this indicated that Premiere is not activated, or there is a problem with activation. What version are you trying to install?
Unfortunately, the link that tells you how to fix this went missing in action some time ago. -
Cannot run workbook from desktop
Greetings All,
Discoverer version 10.1.2.0.2,
Disco Admin has created business areas and workbooks. Admin has also shared workbook with a user. When user tried to run workbook user is not prompted for parameters. WHen user refreshes worksheet still not prompted for paramater and user gets a blank worksheet. Basically, cannot run any shared workbook.(NOTE: do not even get msg that query returned no data).
When user tries to create a workbook by selecting items for a folder in business area, then again the same result - does not didplay any data (NOTE: do not even get msg that query returned no data).
User has select from all tables priv.
Any suggestion?
JP.Hi,
Does the workbook bring back data for any other user?
Does this user have the Create/Edit query (Desktop/Plus privilege?)
Thanks. -
Hi everyone.
Can anyone tell me what is wrong in this code below?
Code:
function NO_DAYSFormula return Number is
begin
IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT>:P_FR_DT
THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:P_TO_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT>:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
END IF;
END;
It gets compiled successfully but when i run the report, i get 2 errors.
Error 1:
REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
ora-06503: PL/SQL : Function returned without value.
Error 2:
REP-0619: You cannot run without a layout.
Should i use only 1 return statement?
Can i use as many return statements as i want?
What is the exact mistake? Please let me know.
Thank You.Let me clear you the first thing...
If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
REP-0619: You cannot run without a layout.
So you just correct the function 'no_daysformula' .
First of all you run the report without that formula column.
If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
As function will always return a single value, Check your formula 'no_daysformula' returns the same.
declare a return variable say for example..
DECLARE
V_DATE DATE;
BEGIN
--YOUR CODE---
RETURN V_DATE := (RETURN VALUE)
END;
Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
If any Problem persists let me know
Regards,
Soofi. -
iTunes will not open because a dialog box pops up with "Itunes cannot run because some of its required files are missing. Please reinstall iTunes.". I have done so a few times to no avail. Any solutions for this problem?
No you will not lose your content reinstalling iTunes.
Do this:
1: Download and run the Registry Cleaner of the free Ccleaner.
http://www.piriform.com/ccleaner/download/standard
2: Next follow this Apple document to un-install iTunes
http://support.apple.com/kb/HT1923
3: Just for good measure, run Ccleaner again
4: Reinstall iTunes.
5: Come back here and click my "Correct answer" button. -
Cannot run more than one instance of a remote app in remote desktop services Server 2012
All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSUHi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP -
Cannot run application HRSystem due to error deploying to DefaultServer.
I am new to java and jdeveloper. I am tring my hands on the tutorial on HRSystem. Below is the error message recieved while deploying the application. Dont know what to do please help.
The plaform is linux. Thanks
DefaultServer startup time: 12661 ms.
DefaultServer started.
[Running application HRSystem on Server Instance DefaultServer...]
Uploading credentials.
---- Deployment started. ---- Jun 2, 2009 3:10:10 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-06-02 15:10:10.73: Writing WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:10.973: Wrote WAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp
2009-06-02 15:10:57.397: Writing EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
2009-06-02 15:10:57.404: Wrote EAR file to /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem
Deploying Application...
<Jun 2, 2009 3:10:59 PM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HRSystem is not versioned.>
Jun 2, 2009 3:10:59 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
Jun 2, 2009 3:10:59 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
<Jun 2, 2009 3:11:22 PM CET> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/o.j2ee/drs/HRSystem/HRSystem-ViewController-webapp. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
Jun 2, 2009 3:11:22 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
<Jun 2, 2009 3:11:22 PM CET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1243951858599' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'HRSystem'.>
<Jun 2, 2009 3:11:22 PM CET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application HRSystem on DefaultServer.: Failed to load webapp: 'HRSystem-ViewController-context-root'.
weblogic.application.ModuleException: Failed to load webapp: 'HRSystem-ViewController-context-root'
#### Deployment incomplete. #### Jun 2, 2009 3:11:22 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
... 12 more
#### Cannot run application HRSystem due to error deploying to DefaultServer.
[Application HRSystem stopped and undeployed from Server Instance DefaultServer]
Edited by: user1423903 on Jun 2, 2009 8:11 AMTry removing this directory: /home/oracle/.jdeveloper/system11.1.1.0.31.52.05/ and restarting JDeveloper.
-
Cannot run application handbook due to error deploying to IntegratedWe
I recently upgraded to Developer version 11.1.2.38.60.81 and when I try to run my test template from the handbook built under a previous version I get the following:
<Sep 29, 2011 6:26:38 PM MST> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Owner\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\handbook\ModelWebApp.war. Please make sure that the annotations are valid. The error is javax.faces.webapp.FacesServlet>
<Sep 29, 2011 6:26:38 PM MST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1317345997673' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
<Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'handbook'.>
<Sep 29, 2011 6:26:38 PM MST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Failed to load webapp: 'handbook-Model-context-root'
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)
at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
Truncated. see log file for complete stacktrace
>
#### Cannot run application handbook due to error deploying to IntegratedWebLogicServer.
[06:26:39 PM] Deployment cancelled.
[06:26:39 PM] ---- Deployment incomplete ----.
[06:26:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
[Application handbook stopped and undeployed from Server Instance IntegratedWebLogicServer]
I have read thru the other threads but have not found an aswer; can someone help?Thanx for your reply. I am very appreciative that you and others take the time to reply. I follow your blog and hope to become more proficient in JDeveloper.
-
#### Cannot run application Application1 due to error deploying to Default.
Hi all,
Now, I am studing ADF 11. When I run my application, I meet a problem:
This problem, "can not run your application", I try to stop java, or rebuild, or clean my application... but not successfull
*#### Cannot run application Application1 due to error deploying to DefaultServer.*
*[Application Application1 stopped and undeployed from Server Instance DefaultServer]*
*[Server Instance DefaultServer is shutting down. All applications currently running will be terminated and undeployed.]*
*[sending request to shutdown server...]*
C:\oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\stopWebLogic.cmd
Stopping Weblogic Server...
But, If I remove adf 11 software, after that I install this software then okie, and I can run my application.
Help me.
thanks allJust for the record - my thinking is that there was an application deployed on the integrated server that was miss configured.
Instead of removing the whole system directory - you could just remove the defaultServer subdirectory there.
But even better would have been the option to remove the specific offending application see here:
http://blogs.oracle.com/shay/2009/08/removing_applications_from_you.html -
Cannot run application due to error deploying to IntegratedWebLog
Hi,
When I run a jspx file in Jdeveloper, I get errors as follow.
How to delete the extra jar file?
==========================================
*** Using port 7101 ***
C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=E:\JDEVEL~3\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;E:\JDEVEL~3\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\JDEVEL~3\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\JDEVEL~3\JDK160~1\lib\tools.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic.jar;E:\JDEVEL~3\modules\features\weblogic.server.modules_10.3.3.0.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\webservices.jar;E:\JDEVEL~3\modules\ORGAPA~1.1/lib/ant-all.jar;E:\JDEVEL~3\modules\NETSFA~1.0_1/lib/ant-contrib.jar;E:\JDEVEL~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;E:\JDEVEL~3\WLSERV~1.3\common\derby\lib\derbyclient.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\xqrl.jar
PATH=E:\JDEVEL~3\patch_wls1033\profiles\default\native;E:\JDEVEL~3\patch_jdev1111\profiles\default\native;E:\JDEVEL~3\WLSERV~1.3\server\native\win\32;E:\JDEVEL~3\WLSERV~1.3\server\bin;E:\JDEVEL~3\modules\ORGAPA~1.1\bin;E:\JDEVEL~3\JDK160~1\jre\bin;E:\JDEVEL~3\JDK160~1\bin;D:\apache-maven-2.0.11\bin;C:\app\Administrator\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Thunder Network\KanKan\Codecs;C:\apps\FME\;C:\Program Files\Subversion\bin;C:\Program Files\TortoiseSVN\bin;D:\win2008EclipseWorkspace;E:\OracleBI_win2008_32_20101206\Oracle_BI1\bin;E:\OracleBI_win2008_32_20101206\Oracle_BI1\opmn\bin;E:\OracleBI_win2008_32_20101206\Oracle_BI1\opmn\lib;E:\OracleBI_win2008_32_20101206\Oracle_BI1\perl\bin;E:\JDEVEL~3\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
E:\JDEVEL~3\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Jdev11113_win2008_32\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=E:\JDEVEL~3\WLSERV~1.3 -Dwls.home=E:\JDEVEL~3\WLSERV~1.3\server -Dweblogic.home=E:\JDEVEL~3\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2 -Dcommon.components.home=E:\JDEVEL~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=E:\JDEVEL~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=E:\JDEVEL~3\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\JDEVEL~3\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=E:\JDEVEL~3\patch_wls1033\profiles\default\sysext_manifest_classpath;E:\JDEVEL~3\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Dec 8, 2010 10:28:16 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<Dec 8, 2010 10:28:16 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Dec 8, 2010 10:28:17 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 8, 2010 10:28:17 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 8, 2010 10:28:18 AM PST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 8, 2010 10:28:18 AM PST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Dec 8, 2010 10:28:18 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Dec 8, 2010 10:28:23 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 8, 2010 10:28:30 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 8, 2010 10:28:30 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 8, 2010 10:28:39 AM PST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed..
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:212)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:39 AM PST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SimpleJSF'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:39 AM PST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 8, 2010 10:28:39 AM PST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00004. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Dec 8, 2010 10:28:39 AM PST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:eded:4bde:3918:bbf1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.17:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:c0a8:111:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Dec 8, 2010 10:28:42 AM PST> <Warning> <Server> <BEA-002611> <Hostname "WIN-IT8WDLG81KH", maps to multiple IP addresses: 192.168.1.17, fe80:0:0:0:eded:4bde:3918:bbf1%10>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 30236 ms.
IntegratedWebLogicServer started.
[Running application SimpleJSF on Server Instance IntegratedWebLogicServer...]
[10:28:44 AM] ---- Deployment started. ----
[10:28:44 AM] Target platform is (Weblogic 10.3).
[10:28:46 AM] Retrieving existing application information
[10:28:46 AM] Running dependency analysis...
[10:28:46 AM] Deploying 2 profiles...
[10:28:47 AM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF\SimpleJSFWebApp.war
[10:28:47 AM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF
[10:28:47 AM] Redeploying Application...
<Dec 8, 2010 10:28:49 AM PST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed..
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:212)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:49 AM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1291832928119' for task '0'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:49 AM PST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'SimpleJSF'.>
<Dec 8, 2010 10:28:49 AM PST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SimpleJSF'.>
<Dec 8, 2010 10:28:49 AM PST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: :org.apache.commons.logging.LogConfigurationException:Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
[10:28:49 AM] #### Deployment incomplete. ####
[10:28:49 AM] Remote deployment failed
#### Cannot run application SimpleJSF due to error deploying to IntegratedWebLogicServer.
[Application SimpleJSF stopped and undeployed from Server Instance IntegratedWebLogicServer]I delete that log file. But I get new errors.
=================================================
[Running application SimpleJSF on Server Instance IntegratedWebLogicServer...]
[09:55:19 AM] ---- Deployment started. ----
[09:55:19 AM] Target platform is (Weblogic 10.3).
[09:55:19 AM] Retrieving existing application information
[09:55:20 AM] Running dependency analysis...
[09:55:20 AM] Deploying 2 profiles...
[09:55:20 AM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF\SimpleJSFWebApp.war
[09:55:20 AM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF
[09:55:20 AM] Redeploying Application...
<ContextLoader><initWebApplicationContext> Context initialization failed
org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [WEB-INF/my-other-managed-beans.xml]; nested exception is java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:420)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:342)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:310)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149)
at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124)
at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:92)
at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123)
at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:422)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parse(ConfigBeanDefinitionParser.java:142)
at org.springframework.beans.factory.xml.NamespaceHandlerSupport.parse(NamespaceHandlerSupport.java:69)
at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.parseCustomElement(BeanDefinitionParserDelegate.java:1297)
at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.parseCustomElement(BeanDefinitionParserDelegate.java:1287)
at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentReader.parseBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:135)
at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentReader.registerBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:92)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registerBeanDefinitions(XmlBeanDefinitionReader.java:507)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:398)
... 50 more
<Dec 9, 2010 9:55:21 AM PST> <Warning> <HTTP> <BEA-101162> <User defined listener org.springframework.web.context.ContextLoaderListener failed: org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [WEB-INF/my-other-managed-beans.xml]; nested exception is java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut.
org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [WEB-INF/my-other-managed-beans.xml]; nested exception is java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:420)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:342)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:310)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
Truncated. see log file for complete stacktrace
>
<Dec 9, 2010 9:55:21 AM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1291917320886' for task '1'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
Truncated. see log file for complete stacktrace
>
<Dec 9, 2010 9:55:21 AM PST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'SimpleJSF'.>
<Dec 9, 2010 9:55:21 AM PST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SimpleJSF'.>
<Dec 9, 2010 9:55:21 AM PST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
Truncated. see log file for complete stacktrace
>
[09:55:22 AM] #### Deployment incomplete. ####
[09:55:22 AM] Remote deployment failed
#### Cannot run application SimpleJSF due to error deploying to IntegratedWebLogicServer.
[Application SimpleJSF stopped and undeployed from Server Instance IntegratedWebLogicServer] -
[SOLVED] configure: error: cannot run C compiled programs
I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.
Maybe you are looking for
-
Carry forward balance - Go-live
Hi, Would like to know more about the steps need to be taken for data migration during year end. System going live example : Year 2009 AR, AP, GL, Asset all will be posted with posting date 31.12.2008 CC and PC is in scope. After uploading everything
-
I am worried my programs are corrupt, because FCP tells me my progressive H.264 file is interlaced (upper first) and Compressor analyses the same movie as bottom first. It should be progressive! Why are they not telling me it's progressive, and why b
-
Hi What's the most lightweight method of connecting to a Tuxedo message bus from Java to both post messages and process responses? From what I've read, there is a Java language binding for the ATMI interface? Only examples I can find are for C++ and
-
Aperture 3.1.1 - Albums Deleted or MISSING
I am running Aperture 3.1.1 on a MacBook Pro 2.2GHz Intel Core 2 Duo- I had been working on my library of about 12,000 images earlier this evening, took a break to eat (shut down Aperture), and then returned to work. When I started Aperture again, I
-
Canon i550 won't print with MacBook and Airport Extreme
Since we got a new MacBook, we upgraded our Airport Express (b/g) to Airport Extreme (n). Needed tech support from Apple to get the computers on the internet (something about the cable company switching IP addresses), which worked great, but since th