Cannot run zpool (zfs feature) command in Solaris 10 6/06
Hi, I couldnt run ZPOOL command in Solaris 10 6/06. It said command not found.
May I know what should I do? My Solaris 10 version provide Solaris zoning features, but no ZFS feature provided.
How?
check your PATH- the zpool command is in the /usr/sbin directory.
Also, double check you have the zfs packages-
#pkginfo | grep zfs
system SUNWzfskr ZFS Kernel (Root)
system SUNWzfsr ZFS (Root)
system SUNWzfsu ZFS (Usr)
Similar Messages
-
Zpool wont import: /var/cluster/run/HAStoragePlus/zfs not a valid directory
I have this two-node Solaris 10 x86 cluster that refuses to fail the HASP zpool over to the second node.
On node 2, log complains that /var/cluster/run/HAStoragePlus/zfs is not a valid directory:
Aug 17 22:23:28 minipardus SC[,SUNW.HAStoragePlus:8,clstorage,zfspool,hastorageplus_prenet_start]: [ID 148650 daemon.notice] Started searching for devices in '/dev/dsk' to find the importable pools.
Aug 17 22:23:35 minipardus SC[,SUNW.HAStoragePlus:8,clstorage,zfspool,hastorageplus_prenet_start]: [ID 547433 daemon.notice] Completed searching the devices in '/dev/dsk' to find the importable pools.
Aug 17 22:23:35 minipardus SC[,SUNW.HAStoragePlus:8,clstorage,zfspool,hastorageplus_prenet_start]: [ID 471757 daemon.error] cannot import pool 'qnap' : '/var/cluster/run/HAStoragePlus/zfs' is not a valid directory
Aug 17 22:23:35 minipardus SC[,SUNW.HAStoragePlus:8,clstorage,zfspool,hastorageplus_prenet_start]: [ID 117328 daemon.error] The pool 'qnap' failed to import and populate cachefile.
Aug 17 22:23:35 minipardus SC[,SUNW.HAStoragePlus:8,clstorage,zfspool,hastorageplus_prenet_start]: [ID 292307 daemon.error] Failed to import:qnap
In fact, on node 2 this folder is missing, i.e. the /var/cluster/run/HAStoragePlus folder isn't there.
If I create that folder, and the zfs folder inside it, then switchover works flawlessly both ways, but if I reboot node 2, that folder
gets cleared and the problem is back again. Looks like a bug to me, but I perused sunsolve without finding anything.
This is Sun Cluster 3.2 update 2 with latest patchset, running on a Solaris 10 x86 update 7 (latest).
I already tried removing and recreating the HASP resource, no way.
Any hint will be greatly appreciated.
Thanks
Rick
Edited by: leopardus2 on Aug 18, 2009 2:46 AMAfter many sleepless nights looking at this problem, I ended up solving it by myself right 30 minutes after posting here!!
The problem was due to ZFS plugin not being configured in /etc/cluster/eventlog/eventlog.conf !!
I think this happened because I installed HASP on node 1 before node 2 joined the cluster for the first time.
Should be marked as a bug IMHO...
Thanks
Rick -
RBAC and zlogin, zpool, zfs commands - doesn't work
Question about RBAC and the zlogin, zpool, and zfs commands. If you go into SMC and look at the rights being assigned to a user, on the left side you have a long list of commands that are denied to the user. Not listed in /usr/bin or /usr/sbin are the zpool and zfs commands. I can assign a user a very limited set of commands, and ones that remain in the left column (such as lustatus or format, for example) remain forbidden and cannot be used. However, commands like zfs create will still work, even though explicitly not granted through RBAC. There is a link in /usr/sbin for zfs to /sbin, and I added the /sbin directory to the list of commands denied, but with the link in place, the command still works for the user. When I logout of the session then go back into SMC after logging back in, the /sbin directory I added is gone again and the commands still work. I tried creating a new right but the same thing happens. Similar things happen with commands located in /usr/ucb which are all allowable since they cannot be explicitly denied. How to deal with this situation?
thanks
mcIf zfs believes there is an active pool using the disk, then even the -f flag will not work. What is the output of 'zpool status'? If it shows disk11 as a hot spare, and you don't want it as a hot spare, then use 'zpool remove'. Note that 'remove' will only work if it is in AVAIL state and not INUSE state.
-
In Windows I would expect to call up a seperate command window with the following, but it appears to freeze up. What am I doing wrong?
import java.io.*;
public class command {
public static void main(String[]args) {
try {
Process runprogram = Runtime.getRuntime().exec("C:\\windows\\system32\\cmd.exe");
try {
runprogram.waitFor();
catch(InterruptedException e){}
catch(IOException e) {
System.err.println("Cannot run command window");
}What about this...
Process proc = null;
try
proc = Runtime.getRuntime().exec("start cmd");
proc.waitFor();
catch(Exception e)
e.printStackTrace();
}Some dukies would be nice next time ;-) -
Why the following command cannot run successfully?
Why the following command cannot run successfully?
SQL> exec DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE;
BEGIN DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to
'EVOLVE_SQL_PLAN_BASELINE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredHere is an example how you can invoke it:
SET SERVEROUTPUT ON
SET LONG 10000
DECLARE
report clob;
BEGIN
report := DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE(
sql_handle => 'SYS_SQL_593bc74fca8e6738');
DBMS_OUTPUT.PUT_LINE(report);
END;
/With kind regards
Krystian Zieja
http://www.projectenvision.com -
Cannot run linux commands since Snow Leopard upgrade
Hi,
I recently upgraded to Snow Leopard (10.6) from Leopard . . . The issue is that I can no longer run some of linux commands in the same directories where I have run them before. Two cases, chmod and rm
chmod a+x or chmod 777, I get prompts that indicate that I am not running the command properly? What's that all about?
The other example is a recursive remove that I use all the time to get rid of backup files . . .
rm -rf .bak or rm-rf ./bak Neither works anymore and I'm starting to doubt myself . . . when I actually found this issue I was not retyping, just reopening the command shell, and using the arrow to get back to the command(s).
Help! I am a professional developer, but this is really slowing me down. I can't even sudo anymore.
Also, what is wheel? When I ls-al, I see the owner is user, but the next column appears to be a group, wheel.I suspect, from the examples cited, you just ran them incorrectly. For instance, you have given here
rm-rf ./bak
which won't work as there is no space between the command "rm" and the options "-rf" (which are for "recursive" and "force"), so the shell sees the command as being "rm-rf" and there ain't no sech thing. The other remove command is for a file named ".bak" and again I suspect you have no such file, so the command won't work. If you want to remove a particular file the easy way is to just type rm, a space, and then drag the file into the Terminal. You should not need the option to force for a file created by yourself, nor do you need recursive for a single file.
The chmod commands need something to work on, for instance
chmod 777 /Users/francine/Desktop/misc/driveicons
changes the permissions of the folder "driveicons" from drwxr-xr-x to drwxrwxrwx and works just fine. If you have used a command incorrectly, using the arrow keys to move back thru the history won't help, you'll just get your incorrectly used command repeated.
I think you just don't really understand what it is you have done and are doing. My guess is that you copied some commands you found or someone gave you, without knowing much about what the Terminal is, what a shell is, how the shell works, and so on. That is all more than a little risky, especially if you are using chmod and remove commands.
And yes, there is a group wheel. However, generally the wheel group has root (system) as the user.
Francine
Francine
Schwieder -
[SOLVED] configure: error: cannot run C compiled programs
I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall. -
Is it possible to run Acrobat3D from the command line?
I'd like to know if it is possible to run Arobat3D from the command line in batch mode. I'm interested in knowing if this is possible in either a windows or unix environment.
My objective is to convert CAD data e.g. CATIA V5 or DXF etc to PDF, in batch mode without using the Acrobat3D interface itself.
I know that it's possible to run a batch process from within Acrobat3D itself, therefore one solution may be to invoke those batch processes from the command line.
I've looked through the other listings on this forum and seen this question asked previously, but I've not seen any responses that suggest this is even a feasible concept.As of now, it's not possible in the cmd-mode to just remain connected and not stream.
But the reason you want to do that is because of the long start-up time. That 20 sec time can be divided into:
1. launch time
2. time to start encoding (after pressing start button) -> cannot be reduced even if 'connected only' feature is available in cmd-line
Below are tips you can use to reduce this 20 sec of time:
1. Lesser the no. of devices connected to the system, shorter is the launch time. Disable the devices which are not to be used in the session.
2. Try using device indexes (0, 1, 2, etc) instead of device names in the profile. Indexes might change after you disable some of the devices.
3. Use the profile with correct settings, to avoid any validation errors.
4. Higher the video size, higher is the overall time. Small sizes take lesser time to start.
Let me know if you see any improvement in the startup time. -
Cannot run application due to error deploying to IntegratedWebLog
Hi,
When I run a jspx file in Jdeveloper, I get errors as follow.
How to delete the extra jar file?
==========================================
*** Using port 7101 ***
C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=E:\JDEVEL~3\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;E:\JDEVEL~3\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\JDEVEL~3\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\JDEVEL~3\JDK160~1\lib\tools.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic.jar;E:\JDEVEL~3\modules\features\weblogic.server.modules_10.3.3.0.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\webservices.jar;E:\JDEVEL~3\modules\ORGAPA~1.1/lib/ant-all.jar;E:\JDEVEL~3\modules\NETSFA~1.0_1/lib/ant-contrib.jar;E:\JDEVEL~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;E:\JDEVEL~3\WLSERV~1.3\common\derby\lib\derbyclient.jar;E:\JDEVEL~3\WLSERV~1.3\server\lib\xqrl.jar
PATH=E:\JDEVEL~3\patch_wls1033\profiles\default\native;E:\JDEVEL~3\patch_jdev1111\profiles\default\native;E:\JDEVEL~3\WLSERV~1.3\server\native\win\32;E:\JDEVEL~3\WLSERV~1.3\server\bin;E:\JDEVEL~3\modules\ORGAPA~1.1\bin;E:\JDEVEL~3\JDK160~1\jre\bin;E:\JDEVEL~3\JDK160~1\bin;D:\apache-maven-2.0.11\bin;C:\app\Administrator\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Thunder Network\KanKan\Codecs;C:\apps\FME\;C:\Program Files\Subversion\bin;C:\Program Files\TortoiseSVN\bin;D:\win2008EclipseWorkspace;E:\OracleBI_win2008_32_20101206\Oracle_BI1\bin;E:\OracleBI_win2008_32_20101206\Oracle_BI1\opmn\bin;E:\OracleBI_win2008_32_20101206\Oracle_BI1\opmn\lib;E:\OracleBI_win2008_32_20101206\Oracle_BI1\perl\bin;E:\JDEVEL~3\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
E:\JDEVEL~3\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=E:\JDEVEL~3\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Jdev11113_win2008_32\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=E:\JDEVEL~3\WLSERV~1.3 -Dwls.home=E:\JDEVEL~3\WLSERV~1.3\server -Dweblogic.home=E:\JDEVEL~3\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2 -Dcommon.components.home=E:\JDEVEL~3\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=E:\JDEVEL~3\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=E:\JDEVEL~3\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\JDEVEL~3\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~2\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=E:\JDEVEL~3\patch_wls1033\profiles\default\sysext_manifest_classpath;E:\JDEVEL~3\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Dec 8, 2010 10:28:16 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<Dec 8, 2010 10:28:16 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Dec 8, 2010 10:28:17 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 8, 2010 10:28:17 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 8, 2010 10:28:18 AM PST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 8, 2010 10:28:18 AM PST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00004. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Dec 8, 2010 10:28:18 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Dec 8, 2010 10:28:23 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 8, 2010 10:28:30 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 8, 2010 10:28:30 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 8, 2010 10:28:39 AM PST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed..
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:212)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:39 AM PST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SimpleJSF'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:39 AM PST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 8, 2010 10:28:39 AM PST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00004. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Dec 8, 2010 10:28:39 AM PST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:eded:4bde:3918:bbf1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.17:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:c0a8:111:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Dec 8, 2010 10:28:42 AM PST> <Warning> <Server> <BEA-002611> <Hostname "WIN-IT8WDLG81KH", maps to multiple IP addresses: 192.168.1.17, fe80:0:0:0:eded:4bde:3918:bbf1%10>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 8, 2010 10:28:42 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 30236 ms.
IntegratedWebLogicServer started.
[Running application SimpleJSF on Server Instance IntegratedWebLogicServer...]
[10:28:44 AM] ---- Deployment started. ----
[10:28:44 AM] Target platform is (Weblogic 10.3).
[10:28:46 AM] Retrieving existing application information
[10:28:46 AM] Running dependency analysis...
[10:28:46 AM] Deploying 2 profiles...
[10:28:47 AM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF\SimpleJSFWebApp.war
[10:28:47 AM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF
[10:28:47 AM] Redeploying Application...
<Dec 8, 2010 10:28:49 AM PST> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed..
com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:212)
at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:195)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:49 AM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1291832928119' for task '0'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: org.apache.commons.logging.LogConfigurationException: Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
<Dec 8, 2010 10:28:49 AM PST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'SimpleJSF'.>
<Dec 8, 2010 10:28:49 AM PST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SimpleJSF'.>
<Dec 8, 2010 10:28:49 AM PST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: :org.apache.commons.logging.LogConfigurationException:Invalid class loader hierarchy. You have more than one version of 'org.apache.commons.logging.Log' visible, which is not allowed.
at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:385)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
Truncated. see log file for complete stacktrace
>
[10:28:49 AM] #### Deployment incomplete. ####
[10:28:49 AM] Remote deployment failed
#### Cannot run application SimpleJSF due to error deploying to IntegratedWebLogicServer.
[Application SimpleJSF stopped and undeployed from Server Instance IntegratedWebLogicServer]I delete that log file. But I get new errors.
=================================================
[Running application SimpleJSF on Server Instance IntegratedWebLogicServer...]
[09:55:19 AM] ---- Deployment started. ----
[09:55:19 AM] Target platform is (Weblogic 10.3).
[09:55:19 AM] Retrieving existing application information
[09:55:20 AM] Running dependency analysis...
[09:55:20 AM] Deploying 2 profiles...
[09:55:20 AM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF\SimpleJSFWebApp.war
[09:55:20 AM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SimpleJSF
[09:55:20 AM] Redeploying Application...
<ContextLoader><initWebApplicationContext> Context initialization failed
org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [WEB-INF/my-other-managed-beans.xml]; nested exception is java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:420)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:342)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:310)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149)
at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:124)
at org.springframework.web.context.support.XmlWebApplicationContext.loadBeanDefinitions(XmlWebApplicationContext.java:92)
at org.springframework.context.support.AbstractRefreshableApplicationContext.refreshBeanFactory(AbstractRefreshableApplicationContext.java:123)
at org.springframework.context.support.AbstractApplicationContext.obtainFreshBeanFactory(AbstractApplicationContext.java:422)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parse(ConfigBeanDefinitionParser.java:142)
at org.springframework.beans.factory.xml.NamespaceHandlerSupport.parse(NamespaceHandlerSupport.java:69)
at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.parseCustomElement(BeanDefinitionParserDelegate.java:1297)
at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.parseCustomElement(BeanDefinitionParserDelegate.java:1287)
at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentReader.parseBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:135)
at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentReader.registerBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:92)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registerBeanDefinitions(XmlBeanDefinitionReader.java:507)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:398)
... 50 more
<Dec 9, 2010 9:55:21 AM PST> <Warning> <HTTP> <BEA-101162> <User defined listener org.springframework.web.context.ContextLoaderListener failed: org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [WEB-INF/my-other-managed-beans.xml]; nested exception is java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut.
org.springframework.beans.factory.BeanDefinitionStoreException: Unexpected exception parsing XML document from ServletContext resource [WEB-INF/my-other-managed-beans.xml]; nested exception is java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:420)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:342)
at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBeanDefinitions(XmlBeanDefinitionReader.java:310)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143)
at org.springframework.beans.factory.support.AbstractBeanDefinitionReader.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
Truncated. see log file for complete stacktrace
>
<Dec 9, 2010 9:55:21 AM PST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1291917320886' for task '1'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
Truncated. see log file for complete stacktrace
>
<Dec 9, 2010 9:55:21 AM PST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'SimpleJSF'.>
<Dec 9, 2010 9:55:21 AM PST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SimpleJSF'.>
<Dec 9, 2010 9:55:21 AM PST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1514)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NoClassDefFoundError: Could not initialize class org.springframework.aop.aspectj.AspectJExpressionPointcut
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at org.springframework.aop.config.ConfigBeanDefinitionParser.class$(ConfigBeanDefinitionParser.java:208)
at org.springframework.aop.config.ConfigBeanDefinitionParser.createPointcutDefinition(ConfigBeanDefinitionParser.java:539)
at org.springframework.aop.config.ConfigBeanDefinitionParser.parsePointcut(ConfigBeanDefinitionParser.java:476)
Truncated. see log file for complete stacktrace
>
[09:55:22 AM] #### Deployment incomplete. ####
[09:55:22 AM] Remote deployment failed
#### Cannot run application SimpleJSF due to error deploying to IntegratedWebLogicServer.
[Application SimpleJSF stopped and undeployed from Server Instance IntegratedWebLogicServer] -
The result of id command in Solaris 10
Hi Guys,
I was trying to install oracle database in Solaris 10 8/11.
at the end of installation where we supposed to execute the root.sh in the ORACLE_HOME it is said that I am not root.
Actually I was already connected as root.
in this root.sh command, it actually validates the user which trying to execute it.
here's the validation part:
RUID=`/usr/bin/id|$AWK -F\( '{print $2}'|$AWK -F\) '{print $1}'`
if [ ${RUID} != "root" ];then
$ECHO "You must be logged in as root to run root.sh."| $TEE -a $LOG
$ECHO "Log in as root and restart root.sh execution."| $TEE -a $LOG
exit 1
fiapparently the result of id in this Solaris I'm using is:
uid=0(#root) gid=0(root)
that is why the validation is always failed because it always compares root against #root.
is this something new in Solaris 10 8/11?
anyway, once I fixed the script, everything is running fine.
btw, this is a Solaris 10 X64 installed inside a virtual box.
Regards,
AdhikaHi Abrante,
Thanks a lot!
You're right I changed the shell on the /etc/passwd but I want to maintain the old value so I just comment out the original line.
I didn't think that it will still be read like this.
is there any way to comment out lines in /etc/passwd?
Thank you,
Adhika -
ITunes cannot run because it has detected audio configuration problem?
I've got Windows XP, recently did a system restore and was forced to re-install iTunes afterwards. After installation, I click the iTunes icon and get a pop up "iTunes cannot run because it has detected a problem with your audio configuration." I went to the iTunes support page and found a similar trouble shooting scheme. I applied both options and both failed. I tried re-installing again to repair, but after the repair, the problem still remains. I found a major difference in the trouble shooting scheme however and I wander if that could be it. The web page shows quick time's audio channels as "Stereo (L R)", however my quick time control panel doesn't feature that channel. Instead, there are 7 "LayoutTags" to choose from, each containing 7 digits. I'm no computer whiz, so I'm going to need help on this one.
replying to lowriderpharaoh.
hmmmmm. it's sounding like you've still got a damaged version of QuickTime in the PC. (or at least, there's something going wrong with the quicktime.)
let's try swapping out the QuickTime again. we'll take a few additional explicit precautions this time.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
if it doesn't launch properly, are you still getting the unusual display effects in the QT preferences? -
I downloaded Jdev 11g and followed instructions for [Oracle Fusion Store Front Demo Application|http://www.oracle.com/technology/products/jdev/samples/fod/index.html].
The schema and sample data is installed successfully. I am able to compile and build both model and UI projects in StoreFrontModule.jws.
When I run the StoreFrontUI, I am getting below error. Can you please help.D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;D:\product\10.1.3.1\OracleAS_3\jdk\bin;D:\product\10.1.3.1\OracleAS_3\ant\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\apps\db\oracle102\bin;C:\Program Files\Symantec\pcAnywhere\;D:\product\10.1.3.1\OracleAS_3\MOBILE\sdk\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Djbo.34010=false -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=D:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=D:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=D:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<Jan 11, 2009 12:42:13 PM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<Jan 11, 2009 12:42:13 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<Jan 11, 2009 12:42:14 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008
WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008
WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<Jan 11, 2009 12:42:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 11, 2009 12:42:18 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jan 11, 2009 12:42:19 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Jan 11, 2009 12:43:12 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jan 11, 2009 12:43:25 PM IST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<Jan 11, 2009 12:43:25 PM IST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<Jan 11, 2009 12:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jan 11, 2009 12:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jan 11, 2009 12:43:46 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jan 11, 2009 12:43:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jan 11, 2009 12:43:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jan 11, 2009 12:43:50 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jan 11, 2009 12:43:50 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.100:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jan 11, 2009 12:43:50 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jan 11, 2009 12:43:50 PM IST> <Warning> <Server> <BEA-002611> <Hostname "192.168.1.100", maps to multiple IP addresses: 192.168.1.100, 127.0.0.1>
<Jan 11, 2009 12:43:50 PM IST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 192.168.1.100, 127.0.0.1>
<Jan 11, 2009 12:43:51 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jan 11, 2009 12:43:51 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 153953 ms.
DefaultServer started.
[Running application StoreFrontModule on Server Instance DefaultServer...]
Uploading jazn-data identities.
Uploading jazn-data policies.
Uploading credentials.
---- Deployment started. ---- Jan 11, 2009 12:45:09 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-01-11 12:45:20.906: Writing WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule\StoreFrontModule-StoreFrontUI-webapp
2009-01-11 12:46:22.093: Wrote WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule\StoreFrontModule-StoreFrontUI-webapp
2009-01-11 12:46:31.515: Writing EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule
2009-01-11 12:46:31.656: Wrote EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule
Deploying Application...
<Jan 11, 2009 12:46:38 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application StoreFrontModule is not versioned.>
Jan 11, 2009 12:46:38 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
Jan 11, 2009 12:46:43 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
#### The deployment process timed out after 120000 milliseconds and has been interrupted. Failed to start Application.
#### Deployment incomplete. #### Jan 11, 2009 12:47:07 PM
oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: oracle.jdeveloper.deploy.DeployException
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
... 11 more
Caused by: java.lang.InterruptedException
at java.lang.Object.wait(Native Method)
at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:390)
... 12 more
#### Cannot run application StoreFrontModule due to error deploying to DefaultServer.
[Application StoreFrontModule stopped and undeployed from Server Instance DefaultServer]
ADF Library non-OC4J post-deployment (millis): 31
Jan 11, 2009 12:47:39 PM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
WARNING: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:D:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/StoreFrontModule/kulojs/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:D:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Jan 11, 2009 12:47:39 PM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
WARNING: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:D:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/StoreFrontModule/kulojs/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:D:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Jan 11, 2009 12:47:39 PM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
WARNING: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:D:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/StoreFrontModule/kulojs/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:D:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.Hi,
I am noticing a problem when running the FOD application, which though not severe, I just thought I will run it by all you experts out here.
When the application opens in the browser, I am unable to see any of the pictures / photos of the products being displayed....they all show that red-crossed-error thing.
Just today I noticed that an error is also getting generated during the application execution:
[java] SEVERE: Error initializing the JMX FRamework SPI "oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProviderImpl"
[java] java.lang.reflect.InvocationTargetException
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Anybody knows what this can be about and how to resolve the same?
I saw the comment above which refers to cleaning up the deployment folder, and I searched my d:\oracle\middleware folder for any folder named drs, but nothing showed up.
Being new to jdeveloper, can someone please tell me the exact steps to fix this error please?
Regards,
Hemant -
How to Setup an ACL over a Command in solaris 2.6
Hi all,
Has anyone have an idea on how to setup an ACL over a command
in solaris 2.6 . i.e: to force a user (or a group) to enter a
password to run a command (like mount and others).
Thanks for your help.
haed98.
[email protected]Hi head98,
You can set ACL using setfacl commands. This way you can exclusively assign read/write/execute permissions on command that you wish. But ACL doesn't prompt for passwords or you can set passwords using ACL. One way of doing this will be to create wrapper for commands which will prompt for passwd, compare them with /etc/shadow and then execute the real command.
Hope this helps, Thanks. SUN/DTS -
Configure: error: cannot run C compiled programs.
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error
'configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details'
I have attached portion of the config.log
configure:3739: checking whether the C compiler works
configure:3761: gcc conftest.c >&5
configure:3765: $? = 0
configure:3813: result: yes
configure:3816: checking for C compiler default output file name
configure:3818: result: a.out
configure:3824: checking for suffix of executables
configure:3831: gcc -o conftest conftest.c >&5
configure:3835: $? = 0
configure:3857: result:
configure:3879: checking whether we are cross compiling
configure:3887: gcc -o conftest conftest.c >&5
In file included from conftest.c:11:
/usr/include/stdio.h:21:31: sys/feature_tests.h: No such file or directory
In file included from /usr/include/stdio.h:66,
from conftest.c:11:
/usr/include/iso/stdio_iso.h:90: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:208: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:210: error: syntax error before '*' token
In file included from /usr/include/stdio.h:135,
from conftest.c:11:
/usr/include/iso/stdio_c99.h:54: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:54: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:56: error: redefinition of parameter '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:56: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:68: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:68: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:70: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:70: error: previous definition of '_RESTRICT_KYWD' was here
configure:3891: $? = 1
configure:3898: ./conftest
./configure: line 3900: ./conftest: No such file or directory
configure:3902: $? = 127
configure:3909: error: in `/wireshark-1.6.7':
configure:3911: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details934802 wrote:
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error Where did you get this file? -
Help! job scheduled in DB13 cannot run successfully
Hi! I am a basis administrator of an automobil company.
Job scheduled in DB13 in our PRD system cannot run successfully.
We have Central instance(ci) and Database instance(db) installed on seperated hosts. We use SUN cluster 3.1 technology.
The problem occurs after my college restarted the whole system accidentally. After that, all the job scheduled in DB13 report the same error,job log looks like:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000192, user ID ***)
No application server found on database host - rsh will be used
Execute logical command BRCONNECT On host orahost
Parameters: -u / -c -f check
BR801I BRCONNECT 6.20 (113)
BR252E Function fopen() failed for '/oracle/PR1/sapcheck/cduuoiij.chk' at location main-8
BR253E errno 2: No such file or directory
I manually type the 'rsh' command on ci to invoke 'brconnect' on db. It works all right. And I check the rfc destination 'SAPXPG_DBDEST_ORAHOST' in sm59 , it's normal. There is no gateway instance on database server.
The parameter 'SAPDBHOST' = orahost (the database server is called orahost)
the parameter 'SAPLOCALHOST' = cihost(the central instance is located on cihost)
Any suggestion is very appreciated.
Thx!Hi Joe,
DB13 will run only on application server as for that matter any SAP program. It will then connect to database at OS level. I mean you normal reports also fetch data from database for which they have to connect to DB but they all run on application server. The problem is coming in connection to database through the application layer.
Please again review the OSS notes sent by Sunil and me. I think a greater focus on Sunil`s notes should help you out.
Regards.
Ruchit.
Maybe you are looking for
-
G5 - you do not have sufficient permissions
I have a problem similar to one addressed by joshz last June. But I have gone one better - worse. I was trying to install an upgrade to Firefox on my G5 PPC and kept getting "you do not have sufficient permissions" message. I did the "apply to enclos
-
Mass updates for Notification/Workorder status
Is there any way for Mass update of 'status' because orders and notifications need to be un-teco before updating planner groups and work centers? we are using Mass update for IW58,IW38 & IW29 and there is no option for STATUS update.
-
Load Distribution Versus Parallel Jobs processing
Hello, I would request feedback. In Industry Solutions - PS, for mass activity - Automatic Clearing run, there is an Technical Settings tab. This tab has Load distribution settings and an value that can be defined for Number of Jobs. If I put an valu
-
The information from my hotmail account has been deleted accidentally and I need to retrieve it. It was done on an iPad 3 and has not been backed up. How do I reverse this?
-
User manual for photoshop touch
With a wireless Internet connection limited to 10 GB per month, I can't afford to access online tutorials....I need a user manual to download (at the library, as I am now) or a paper copy. I cannot find an email address that would allow me to urge Ad