Cannot save Alert Category

I get error Client 000 has status 'not modifiable'
How to solve it?

Did you logon to client 000 ? To find whats your integration server client, logon to SLD and business systems and select your Web AS ABAP XI business system name, there you can find what the integration server client is.
Or you are creating the alert category through web UI ?
regards
Shravan

Similar Messages

Customizing request window when save the alert category

hi,
i create an alert category in the solution manager and try to save it, but the customizing request window pop up, and i have no idea what is that for.
anyone knows how to save the alert category i created?
Thanks a lot
Jessica Ding

hey, don't want to transport this alert category to prod ?? ,request is for that purpose...

I cannot save my work in Illustrator CC2014.1 due to an 'unknown error'. Any ideas on a solution?

Hi there,
I have produced some work in illustrator and wanting to save before I proceed but Illustrator will not allow me due to an unknown error. I have tried some ideas posted on the web (turning off the visibility of layers, saving as an EPS) but to no avail. I have tried resetting my preferences and turning off sync settings but again no luck. Is anyone else experiencing this and anyone have any ideas on a solution?
Many thanks,
Matt

Hi Jacob,
Thanks for the idea.
Tried that, (tried all the Save As options) and the same 'unknown error' occurs. I have tried saving as an Illustrator EPS and a different alert comes up as 'Cannot Save. A necessary item is missing: ID: 192'. No idea what the necessary item is? Mithril? Gold?
Raghuveer- yes, it still is an issue- joined the connect session and waiting for your response.
Many thanks,
Matt

Variable values in Alert Category

Hi Experts ,
I have all the Alert Category and the respective configuration set.
I am also getting email for the error.
But the standard variables like
SXMS_FROM_SERVICE
SMXS_TO_SERVICE
SMXS_FROM_INTERFACE
SXMS_FROM_NAMESPACE are not gettng populated.
Please suggest what could be the error or anythng tht could be the reason for this.
Thanks in advance.

Hi thomas,
Did you are using a BPM design to trigger the alert,
if yes ..
You cannot use these container variables for alerts of the Business Process Engine (BPE).
Please refer the link..
http://help.sap.com/saphelp_nw70/helpdata/EN/d0/d4b54020c6792ae10000000a155106/frameset.htm
Hope this helps you
Sunil.

7.0 - Cannot save journal after changing content

Hi all,
When I have copied journals to another category or time, and want to change some of its content, I cannot save the journal, as the button 'Save' is not activated. When I post the journal, it does change back to the original entries.
We currently use release 7.0.119.
Thank you for any information or suggestions.
Melanie

Hi Roberto,
do you mean by launching a package copy, if I have tried to copy the data with the data manager package on journal level?
No, I have just copied some journals from one month to the other, say, ACTUAL 2011.NOV to ACTUAL 2011.DEC, and then wanted to change some numbers, and save the journal again. But the icon for saving was not activated.
For now the issue is "solved", as at some stage I have logged off BPC and started it again. But it has happened before, and it is a strange behaviour.
Perhaps it is a service pack issue?
Best regards,
Melanie

Regarding creation of new Alert category

Hi All
When I am creating a new alert category using Tcode ALRTCATDEF and trying to save it .A prompt-message is displayed as prompt for customizing request what should i do to create the new Alert category . and see it in the select Alert category box
Regards,
Aziz

Hi Aneez,
I have given u all the configuration steps with links also the different ways by which u can raise alert.
I think u have not gone through my threads. Also u did not replied me whether u resolved the problem which is raised in thread.
1) how can i send an email alert through RWB?
RWB is used for raising Integration and Adapter engine related errors.
Its depends upto u what kind of errors u want to send.
2)what are the steps i need to configure using Tcode ALRTCATDEF.
Already provided u in one of ur thread.
3) is this possible using CCMS Alerts .
U can use this is another way of raising errros.
4)do i need SMTP to be configured to send an Email Alert ?
GO to SU01 transaction and maintained email address where u need to send alert message. IN ALRTCATDEF u need to mentioned the use in the fixed receiver tab.
Hope it clears to you.
Thnx,
Chirag

Alert Rules vs Alert Category - Is there any limitations for multiple rules

I have an alert configuration implemented already and i want to add few more rules for the same alert category. While creating the rules for new set of scenarios, I am able to create only one rule . Is there any limitations for having the rules per category ?

Hi,
If the Suppress Multiple Alerts of This Rule checkbox is selected (default setting), then no further alerts are generated once the rule has been met until the first alert has been confirmed.
There is no limitation of creating alert rule for a particular alert category.
Check out the steps of Alert rule configuration.
Creating Alert Rules
To create an alert rule in which you use a defined alert category, proceed as follows:
       1.      Give the rule a name (Description).
       2.      Select the alert category that you want to use by clicking the corresponding category in the alert category table.
       3.      If necessary, specify conditions for the sender or receiver, or both.
○       If your rule results in alerts that must be assigned to a specific message, select the option Yes for the Bound to Message condition.
○       If your rule results in alerts that are not assigned to a message, that is, they are caused by errors that occurred before the message was sent, select the option No for the Bound to Message condition.
In this case you cannot enter any further details about the sender or receiver.
○       If the rule is to cover both cases, select the Not Relevant option.
       4.      If required, restrict the errors further to:
○       Errors reported from the Integration Engine (with or without error category or error code)
○       Errors reported from the Adapter Engine (with or without adapter type)
You can enter an asterisk (*) in steps 3 and 4. You can enter just the asterisk, or enter it at the start, end, or start and end of a string.
       5.      To add the new rule to the list of alert rules, choose Add Rule.
If the Rule Activated check box is selected (default setting), the rule is automatically activated when you add it and is displayed as active.
If the Suppress Multiple Alerts of This Rule checkbox is selected (default setting), then no further alerts are generated once the rule has been met until the first alert has been confirmed.
Once you have created a rule, it is automatically displayed in the list of alert rules. If you want to display the conditions of a rule, select a rule in the list and choose Show Conditions.
Hope this will help you.
Regards
Aashish Sinha
PS : reward point if helpful

Cannot save ... The file has been changed by another application.

Hi,
This is to report a wierd behavior when pages is auto saving documents.
An error pops up "Cannot save ... The file has been changed by another application."
Clicking "save anyways" seems to save the document OK, but still this is very anoying.
Saving the document manually (from the menu) isn't showing any error message.
Can someone help with a hint as of when this will be fixed or is there a workaround?
Thank you in advance,
Best Regards,
Michel.
Pages version 5.0.1 (1478) on OS X 10.9

The phrase "by another application" makes it pretty clear that it is not Pages (or, in your case, Keynote).
What seems to be happening is that between the time that Pages opens a document, or saves it and the next time that it attempts to save it, something updates the document's file on the hard drive. Pages, recognizing that the file contains changes for which it is not responsible, presents this alert so you can decide whether you want to overwrite those changes. The usual suspects are backup and synchronization applications, like iCloud, which may not recognize the "Open" flag on the file, but I think it can also be triggered by AppleScripts, Automator workflows and Services, if they perform a "Save" action on the file.

[WRT310N] Single Port Forwarding - Cannot save settings

Alright, I updated the firmware on my WRT310N (actually after contacting support asking if No-IP.com was added to the DDNS settings, and I was told that the new update would include it, which it didn't) to v1.0.07-LS-HND and now I cannot save any settings in the Single Port Forwarding settings. I've tested with both Firefox 3.0.7 and IE7.
Everytime I select "Save Settings," I get:
Error: F.from0 is undefined Source File: http://192.168.0.1/SingleForward.asp Line: 137
This is really annoying. Luckily everything I have set I don't need to change...I just want to add.
This is the function code:
function chk_port_range(F)
    var i;
    var from, to, pro, ip;
    for(i=0; i<15; i++) {
        if ( eval( "F.enable"+i+".checked" ) == true ) {
            from = eval( "F.from"+i+".value" );
            to = eval( "F.to"+i+".value" );
            pro = eval( "F.pro"+i+".value" );
            ip = eval( "F.ip"+i+".value" );
            if ( chk_range_helper(from, to, pro, ip) == false ) {
                alert ( errmsg.err74 );
                eval( "F.enable"+i ).checked = false;
                return false;
    return true;

I have exactly the same problem
Does Linksys/Cisco have plans on fixing this issue?
cabozone, thank you for the workaround, but its true that the slots are not enough, crap !

Cannot edit calendar category

Not sure why this hasn't been corrected yet, but on both the iPhone and the iPad, once you create a calendar event, you cannot edit the category. You can only do this via the Mac app or MobileMe. Why???

To clarify...
When I create a calendar item on my iPhone or iPad, I choose which calendar (category/group/type, whatever). I said category to imply I had set up different calendars. So for instance, most of the time I will select the "Work (green)" calendar which happens to be the default.. The problem is that if I accidentally save the item in the wrong calendar, I cannot change it on the iPhone or iPad.
Here's a scenario to make sure everyone is crystal clear on this...
I create a new event, input the time, place, alarm, notes and then I save it. Oops, I meant to save it as a "Personal (blue)" calendar event, but it was saved as a "Work (green)" event. Now, I have to go to MobileMe and change it because I cannot do so on the iPhone or iPad.
Okay now, hope that clears it up.

Create new alert category

Hi there,
I am trying to create a new alert category(alrtcatdef)
I get the following error
Entry CCMS ALERTS does not exist in SALRTCATC (check entry)
ANy hint?
Sabbir

Hi sabbir,
1) Transaction RZ20 is used for creating monitors in CCMS, select Extras --> Activate maintenance functions.
2)Go to monitor (set) --> create, you will get to the following screen:in transaction RZ20 select extras --> activate maintenance functions.
3)Go to monitor (set)--> create, you will get to the screen:
4)click <<< new monitor>>> and select create nodes (F5) button from the toolbox icon.
5)select rule node and hit the continue button.
6)in the next dialog select CCMS_DEFINE_R_SYSTEMS as the rule definition and hit the continue button.
7)Now select <CURRENT> from the match code for the R3 system parameter value and hit the continue button.
Note: pls remember that we are creating a rule Based monitor: we need to make sure NO object checked from the selectable MTE tree.
8) The next step is to create the virtual node to group all the MTEs that we should select from the MTE classes shown in point a. TO do this ,
click on CCMS_DEFINE_R3_SYSTEMS if it is not already selected and hit create nodes (F5) button from the toolbox. now select
virtual node and hit the continue button.
9)in the name field write something like: test rule based monitors and hit the continue button.
10) now click under test rule based monitors to select them and then hit on create nodes (F5)
choose Rule based and hit continue button.
11) On the next screen select CCMS_GET_MTE_BY_CLASS as the rule name and the hit the hit the continue button.
12)Now we need to add each MTE class from point a. to tje following screen on the MTE class
paramater value. select all of them and hit continue button.
13) the next step is to include all MTE classes already defined in point a. you will need to repeat these steps for each
additional class you want to add to the monitor set.
14) After all classes has been included into the monitoring set hit the save button from the toolbox.
15) you will be prompted for a monitor name , write something meaningful.
The new Monitor set should be display
Find the links
http://help.sap.com/saphelp_nw04/helpdata/en/d4/cc823bd26a5c42e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/d60b374e4e7c64e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e8/e7f0fb1a2511d294d200a0c930df15/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/9e9031c28d47b6e10000000a11466f/frameset.ht
regards
srinivas

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

I just purchased to songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

iTunes: How to convert a song to a different file format

Update iPad2 to IOS 4.3.5 cannot save backup to PC

When trying to do update from iTunes, the backup abort stating that it cannot save to the pc. Normal sync works for apps etc. Only firmware upgrade doesn't work. Manually backup also doesn't work.

Apple is still showing this from what I see on the downloads website. Try this.
http://support.apple.com/downloads/#iOS 5.1.1
If that link doesn't open and it looks like it won't open right to the iOS 5.1.1 download - go here and type in iOS 5.1.1 in the search bar.
http://support.apple.com/downloads/

Cannot save password-screen does not stay open long enough

Cannot log into company intranet or home voice mail. Asks for a password and cannot save it as the save password dialogue box does not stay open long enough to click on it. Works fine on other locations

Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

Cannot save Alert Category

Similar Messages

Maybe you are looking for