Cannot save as TIFF from ACR

This is my first post on this forum. Please forgive me if I have completly misunderstood something.
I am using PSE7 with ACR 5.6 on Windows 7 (soon to be updated to PSE 11). I have only been using RAW files for a short while so I am far from familiar with ACR but I am fairly sure that when I first installed it the "Save Image" dialog box offered me several file formats, in a drop down box, to save the image as. I remember tif, jpg, psd and dng at least. Now I am only offered dng (in both all uppercase and all lowercase). Am I remembering wrongly or have I changed something somewhere that is doing this? I can find no way to save the image other than as a dng. If it matters ACR is set to 8bits/channel and I am trying to convert NEF files opened by right clicking in the Organiser and selecting full edit where upon ACR opens.
I have tried re-downloading and replacing the Camera Raw.8bi file to no effect. I suspect it is me doing something wrong rather than anything being "broken".
Many thanks in anticipation.
Peter
Just realised that this is probably better in the Camera Raw forum wich I have just found so I'll re-post it there. Sorry.

The Save button in ACR for PSE is just the DNG converter. To actually save in an image format you open the file in the editor and save there, as 99jon said. AFAICR, it's always been this way in PSE. The other options are in bridge and the other Creative Suite programs.

Similar Messages

I have Cs2 andOffice for Mac 2004 installed on an Os 10.6.3 system. This weekend my computer did an auto pdate to Os 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit.

I had Cs2 and Office for Mac 2004 installed on an OS 10.6.3 system. Worked fine. This weekend my computer did an auto update to OS 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit. Any advise. System or Software problem?

Bad timing. Reapply the security update:
http://support.apple.com/kb/DL1489
What happened is that version 1.0 of the security update was available for a bit of time this weekend, and that disabled Rosetta. Version 1.1 brought it back.

I cannot save an image from google on my iPad. I hold on it and click save but it says save failed. I used to be able to save previously.

I cannot save an image from google on my iPad. I hold on it and click save but it says save failed. I used to be able to save previously. the first time I saved an image a pop up asked if I wanted to allow goggle to do something (can't remember the rest) and I said do not allow. Could that be the problem and how do I now get back to allow google to save images?

Just tested, no problem.
http://i1224.photobucket.com/albums/ee374/Diavonex/e86d2bf9300a80f6c4c7870a2458a 982_zpsebe867fe.jpg

I cannot save a frame from a video following the recent Apple recall to replace my hard drive. There is no menu option with share and save frame. Do I need to reinstall Final Cut Pro?

Since the recent replacement of my hard drive, I cannot save a frame from a video. There is no menu option with share and "save frame" I used to be able to do this.
Please help

In the Share popup select Add Destionation to go to the Destination preference. Drag still image to the sidebar to make it available in the popup.

HT4993 Since I did the ios update yesterdayI cannot save photos (ie from facebook) they will not save in my camera roll)

Since I updated yesterday to the iOS6 day I cannot save photos (ie from Facebook) to my photos.. any help from anyone would be great.

I've noticed that with the iOS update, you're not asked if you want to allow the app to access photos or something. I said do not allow on Facebook thinking that it would upload pictures without my permission. Really this allows you to save photos to your camera roll. Now I have to figure out how to undo this....
You've been able to save photos from Facebook since at least the last update. You just touch the picture for 2-3 seconds and a menu will pop up asking if you want to save it/make profile picture/cancel/etc.

The file "Acceptance Letter.pages" doesn't exist. Since installing Yosemite on MacBook Pro I cannot save or export from Pages. Just get the message at beginning of this post. How to solve problem?

I cannot save or export from Pages since installing Yosemite on MacBook Pro . I just get the message at beginning of this post “Acceptance Letter.pages” doesn’t exist or whatever file title I have inserted How to solve problem?

Thanks Peter but I was not seeking to store with I-Cloud. In fact I never store documents with I-cloud.
I was in fact trying to store the files to Documents, which is where I usually keep such things.
Have now discovered that if I leave the file untiled and simply close it, rather than saving it then it will save, oddly, to Documents. I then have to re-title it and move to the folder I want it in.
Despite the above, even once it is titled and saved in Documents then if I reopen it I still cannot then Export it to a Word or PDF file. I still just get the message . xxxxxx.pages does not exist!
Bad news as I am constantly exporting documents to Word and PDF to send to others who do not use a Mac

Cannot Save TIFF from ACR

This is my first post on this forum. Please forgive me if I have completly misunderstood something.
I am using PSE7 with ACR 5.6 on Windows 7 (soon to be updated to PSE 11/7.2). I have only been using RAW files for a short while so I am far from familiar with ACR but I am fairly sure that when I first installed it the "Save Image" dialog box offered me several file formats, in a drop down box, to save the image as. I remember tif, jpg, psd and dng at least. Now I am only offered dng (in both all uppercase and all lowercase). Am I remembering wrongly or have I changed something somewhere that is doing this? I can find no way to save the image other than as a dng. If it matters ACR is set to 8bits/channel and I am trying to convert NEF files opened by right clicking in the Organiser and selecting full edit where upon ACR opens.
I have tried re-downloading and replacing the Camera Raw.8bi file to no effect. I suspect it is me doing something wrong rather than anything being "broken".
Many thanks in anticipation.
I originally posted this to the PSE forum but I should have posted it here. Sorry for the confusion.
Peter

In the Camera Raw dialog click the “Open Image” button (bottom right) and that will send the file into the Elements Editor interface.
Then use File >> Save As and choose tiff.

Cannot save as TIFF LWZ

In the Photoshop CS6 Beta I don't TIFF options to save. The only option I have in saving a TIFF is raw compression. What's up?

Let me put on my mind reading cap: you're on MacOS and you copied the plugins from an older version of Photoshop into the CS6 plugins folder, or you set the CS6 additional plugins preference to point to the plugins folder of an older version of Photoshop.
Go undo whichever of those you did to get rid of the duplicated plugins that don't work with CS6.
Then the save dialog should work fine again.

Cannot "Save in New Location" ACR 6.3

Hello.
I just installed the 6.3 ACR beta in order to accomodate the Nikon D7000 I just received today and find that I'm unable to "Save in New Location" in Bridge . I'm only able to save to the original location- The SD card. I set the folder, however nothing shows in the dialog box after folder selection as it usually does.
I am using CS5 on 32bit Vista Home Premium. Could someone please tell me if this is a bug or if I have perhaps forgotten something? Had no problems up until this 6.3 candidate. Tried also saving files from my D80 but same problem.
Thanks!

Hello David. Thank you very much for responding.
To answer your questions:
1). Yes. Mounting SD to computer via internal card reader.
2). Yes. Navigating via Bridge.
3). Yes selecting thumbnails on SD card images
4). Yes. Right clicking for open in CR or double clicking to open in PS CS5.
5). Yes clicking save image(s) button. When I do, I receive a "The file could not be created"
meassage in the status dialog.
6). Yes I am selecting "save to new location". Choosing the destination would always display the path
next to "Select Folder" button afterwards but not anymore. The only option that will display the path
is "Save in same location" which now appears to be the default.
Yes, I have copied the files to my hard drive. I have opened both CR from Bridge as well as Bridge to PS with
the same results. Another thing, I tried saving some Nikon D80 NEF files first thing this morning and it wouldn't
save to new location. So it appears that this is not D7000 specific.
I don't believe this is user error as I have processed tens of thousands of images similarly for the past few years.
The problem started when I installed ACR 6.3RC.
Again, thanks much for your response and any assistance you may offer.
-syo

Cannot save a PDF from the internet

Someone has sent me a link to a PDF file and I can open it but when I try to save it to my dropbox like normal I get the message 'The document could not be saved. There was a problem reading this document (26)'.
Does anyone know what this means and how I can fix it?

"The document could not be saved. There was a problem reading this document (26)"
I FOUND A WORK AROUND! Save As, wasn't working for me Either.
So, after you have made your changes,
click on create PDF
Select From Multiple Files.
Window will pop up with current open files.
Make sure only the document you want is on the list.
Click Ok.
Now it has [Binder 1] open.
Click File > Save As
Choose Location Desired
Name document as Desired.
Click Save.

Cannot save or print from within Pages

I can no longer save or print pages documents. Those menu items are grayed out. All I can do is open, close or start a new document, I've tried trashing the pref file to no avail. I also can only open pages documents from within the program, clicking on them doesn't open them even though it will open Pages itself.
Any suggestions?

Did you try running Pages from a different account?
Did you check the Console (Applications > Utilities > Console) for suspicious entries?
Did you try repairing permissions on the volume? (Applications > Utilities > Disk Utility > First Aid > Repair Disk Permissions (I recently heard that hardly ever fixes any problems, but it is easy to do in the background and it doesn't hurt.)
Did you try to reinstall Pages?

Help: I cannot open a tiff in ACR - CS6/Mac v8.6

I am not able to open a tif in ACR anymore.
The option is dimmed in Bridge file File>Open in Camera Raw. The option is not available when I right click on image.
Thanks in advance for your help!
bill

Oh, and if that TIFF has layers now, ACR will not open it either.

CS6 Mac - cannot Save As tiff file

OS X 10.7.3
CS 6 Beta
Open a raw file (CR2), not as smart object
Edit
Save (psd format is the default)
Save As: same name, but choose tiff format
Result: Save As dialogue adds "mpo" as an extension, and the next dialogue is one for JPGs.
1) loading a TIFF file and then trying to Save As a TIFF file with a different name has the same outcome.
2) Saving works properly with my TIFF files. Only Save As fails.

Myron-
Just to clarify, you can't point your plugins to the plugins for an older version of CS5 and expect the program to work properly. In CS6, the default plugins are in a different directory in an effort to make it easier for you to tell what plugins are 3rd party and that you have installed separately. When you point your additional plugins folder to the CS5 plugins, you are pointing to duplicates of many default plugins, which does not make the Mac os very happy. If you make a new folder and set it as your additional plugins folder, you can install your 3rd party plugins there and you will not have the issue with duplicate files or the file save issue.
Hope that helps-
Pattie
Please read theFAQ's below:
Known issues (see Plugin area) http://forums.adobe.com/thread/963812?tstart=0
and this link on plugins: FAQ: How do I install my favorite plugins to Photoshop CS6?
replying to:
" I have no plugins in the CS6 Plugins directory, and have the Additional Plugins Directory set to my CS5 plugins"

CMC cannot save database configuration from a crystal report using WS

Hi all
I have a report in Crystal reports which is using a web service as a datasource. All works fine since web services is not using ws-security but when I deploy my report on CMC i can not save database configuracion. This is because i don't want it to prompt me for the logon credentials.
thanks

Hi Manish,
thanks for your answer. Unfortunately I'm still stuck in this matter.
Does this happen with the sample reports too? I think it will be a good approach to try this to see if your system is behaving differently for sample reports and reports published from outside
I did not really try this, but viewing and editing my reports in Crystal Reports 2008 Designer works perfectly fine. As well can the user view my reports in the InfoViewApp.
Also, does it revert to the login screen setting immediately after you click Save or does it show the setting as changed after clicking Save but, does not retain it when you come back and check the report settings again?
The data is reverted immediately after clicking "Save"
Kind reagrds
Wolfgang

Cannot save JPEG file from RAW file edit.

After editing NEF raw file 8 bit channel in Elements 9 > open image> edit again> save as JPEG maximium> OK. Then end up with broken file image in organiser. Will save as a PDF file. Edited JPEG's saved. Previous edited NEF files (sucessfuly saved as JPEG) will not save as JPEG this time. OS MAC 10.6.8. Do I need to re-enstall? Dread the thought of re organising thousands of images even when tagged.

When you click on the open image button in the Camera Raw dialog make sure the dropdown menu doesn’t show 16 bit. If it does change to 8 bit and then click open image. You can only save jpeg in 8 bit mode.

Cannot save as TIFF from ACR

Similar Messages

Maybe you are looking for