Cannot save changes when enabling Publishing Server

I have Contribute 4 with Contribute Publishing Server 1.11.
I'm able to setup normal Contribute sites fine and was able to
setup one Publishing Server site. Now though, whenever I try to
enable Publishing Server on a site, it enables alright but when I
close the Site Administration window I get an error that says
"Contribute cannot save your changes to the website's shared
settings on the server".
I've tried checking permissions; everything seems 'liberal'
enough like Contribute likes it. I've reinstalled Publishing Server
(including deleting any _mm folders). I've attempted deleting and
re-adding sites more times than I can count. Nothing has seemed to
make a difference. Has anyone experienced this problem or have any
ideas what might be going on? Thanks very much!
Nathan Williams

Hello Nathan, I'm using Contribute 3.11 (without Publishing
Server) and I'm experiencing the same issue: "while trying to setup
the admin password".
It seems to me that this is a bug from Macromedia... and
hopefully they will respond to us.
Alan Q.

Similar Messages

Error when enabling publishing server

The Contribute Publishing Server console on my web server
provides the following URL for enabling publishing services:
Click Enable Publishing Server, and enter:
https://svr-ehrenwerks:8900/contribute/
In Contribute, when I adminster the website and attempt to
"enable publishing server" using the provided URL, an error message
shows up telling me the publishing server at
https://svr-ehrenwerks:8900/contribute/ does not respond.
This URL does not exist on my win2003 server. My guess is I
need to set up an actual domain to replace the svr-ehrenwerks part
of the url and include a virtual directory called "contribute"
under this domain in order to make all this happen. Please help me
"enable my publishing server." Thanks!

kurtanp wrote:
> The Contribute Publishing Server console on my web
server provides the
> following URL for enabling publishing services:
> Click Enable Publishing Server, and enter:
> https://svr-ehrenwerks:8900/contribute/
> In Contribute, when I adminster the website and attempt
to "enable publishing
> server" using the provided URL, an error message shows
up telling me the
> publishing server at
https://svr-ehrenwerks:8900/contribute/ does not respond.
> This URL does not exist on my win2003 server. My guess
is I need to set up an
> actual domain to replace the svr-ehrenwerks part of the
url and include a
> virtual directory called "contribute" under this domain
in order to make all
> this happen. Please help me "enable my publishing
server." Thanks!
>
How did you install CPS? Which OS are you running?
1. Simple Installation
2. War Based installation (deploying war file on your app
server)
Nope you dont need to create virtual directory---
Once you install CPS 1.x? (Simple installation), at the end
of
successful installation, go to your browser and type
https://localhost:8900/contribute/ and see that you are
viewing the
certificate and it allows you to login.
you dont need to create any virtual directory..

Error has occurred. Cannot save changes.

When I try to purchase an app, I get a screen asking me to fill out security questions. I fill all of them in and click on "done" and it says "an error has occurred. cannot save changes". I did a google search and apparently this has been going on for several years. But no where did I find a solution.

Were you able to find a solution? I have the same problem

Error message: iMovie cannot save changes to the library!?!

iMovie crashed my computer and now I can't creat a new movie.
Here's the full error message:
iMovie cannot save changes to the library.
The hard disk where your library is located may be full or unavailable or permissions may have changed. To avoid losing your work, quit iMovie.
What's up with this? I tried trashing the preferences, but got the same message. I have a 27-inch late 2013 iMac running Mavericks with 445.55 GB free space.
Please let me know if you have any suggestions.

You've already tried trashing iMovie preferences (By the way think in Mavericks you have to reboot as well after this for the new preferences to take effect) . One other thing to try is creating a new user account, logging in and seeing if you can create a new project in iMovie (of course you won't see your exisitng projects). If you can then iMovie itself is OK. If not then the only other thing I can think of is re-installing iMovie (see http://macs.about.com/od/usingyourmac/qt/How-To-Re-Download-Apps-From-The-Mac-Ap p-Store.htm)
Is everthing else working OK after your computer crash? Maybe you should also run Verify disk in Disk Utility.
Maybe someone-else has some other suggestions (I have not heard of this problem before)?
Geoff

InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes.

InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes. Can anyone help?

See: Replace Your Preferences

Why does my font change when i publish my site on mobileme?

why does my font change when i publish my site on mobileme?
Can anyone help me, i'm using a font that i got from the internet when i look at it in safari its fine but if i log in from another pc/mac the font is changed!!
Please help.
e-mail - [email protected]

If that's the only place you used that unique font, yes. Convert the textbox to an image file by applying a drop shadow to the font and setting the opacity of the drop shadow to 5%.
Click to view full size
OT

Why does Pages ask me to save changes when I only open a file and print it?

I have documents that I open regularly but only want to print (and not make changes to). But, even if I open them and do nothing other than print them, Pages prompts me to save changes when I close the file. Why is this?
If I've had the document open for a while, I'm always concerned that maybe I've made changes that I want to save and forgotten.

But it always, always, always ignores it, fruhulda. That's what I'm saying. A brand new document on a brand new computer with a fresh install of iwork, and the same thing happens. Every time I open it and print--Do you want to Save? Do you want to Save?
For instance, I have a contract form I use regularly and I get that every.single.time even though I always use the same printer, and have hardly ever used the printer that pages has chosen as my default printer (a medium format inkjet with archival ink that costs far too much to use for things like correspondence). It is not my default printer in OS X, incidentally. No matter how many times I tell Pages to save the information about the printer, it will not. And I also get the same nag on the rare occasions when I do use the printer that pages has chosen (usually by mistake because I forgot to change it in the print dialog).
Perhaps this is a localization-specific bug and that's why you don't see it.
EDIT And most oddly, it happens just the same in lion with the current version of pages, which I would have thought should have autosaved that change without asking me about it.

Is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?

As per the title is it possible to ignore "Rigid relationships between attributes cannot be changed" when using ProcessUpdate for Dimension?
We have a case where very rarely an item might have been miscategorised so the brand is manually changed. We want this dimension to be rigid to speed up ProcessUpdate.
We do a ProcessFull each night, so it will get corrected then, but during the hourly updates we would just like to ignore this error if possible?

Hello,
The rigid relationship should be defined when the members will not change over time. Here are some threads regarding rigid relationship for your reference, please see:
Processing OLAP Cube: http://social.technet.microsoft.com/Forums/sqlserver/en-US/17a55593-9543-404e-a579-0a011965585d/processing-olap-cube?forum=sqlanalysisservices
Flexible and rigid relationship: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d8f5443-065d-4485-9385-6f0b5fa417da/flexible-and-rigid-relationship?forum=sqlanalysisservices
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Cannot Save Changes in Library - Help!

I still cannot save changes I make to a library image back to
the library. I open library, drag the image to the stage, make a
change ... and then it just sits there. Nothing in the library
changes, nothing I do can make the original image in the library
take the changes. I've tried saving as, exporting, creating a new
image (it will not allow me to give it the same name as an existing
library image .. the one I want to change).
I suspect some bug in Flash since I re-installed it on a new
laptop. It worked before. I have tried re-installing it and have
the latest updates from Flash site.
Any ideas???

OK, never mind, I figured it out ... it was my unfamiliarity
with Flash, I rarely do anything there. I had selected the "open as
library" command which does not permit editing. Instead I needed to
open the fla file, then choose Library from the Window menu
Duh.

Error reads "Cannot save information" when trying to save my pdf form on another computer

Can anyone tell me what I have done wrong in the creation of my PDF form. When we try to open it on another PC it comes up with another window which reads as follows:
Cannot Save Form Information
PLEASE NOTE: You cannot save a competed copy of this form on your computer.
If you would like a copy for your records, please fill it in and print it.
If anyone can help me, I would be greatly appreciative !
Thanks,
Robert

That message shouldn't show up if you use Reader 11 or DC, unless the form was created with LiveCycle Designer. It also won't happen in Reader if you Reader-enable the form in Acrobat. To do so with Acrobat 11 select:
File > Save As Other > Reader Extended PDF > Enable More Tools
The specific menu items are different for every other version of Acrobat.

Integration Builder cannot save changes

All,
We have a problem with Integration Builder both Design and
Configuration. If we restart the XI server then we can save changes from both the Designer and Configuration lists one ot two times. After that we get a Java: Null pointer error whenever trying to save changes. No errors reported by ABAP engine or database. Connection to SLD server seems OK.
In the default tracefile the exception message says that a zipfile cannot be written. Have checked the database and filesystems, everything looks OK.
Thanks for any help,
Alan Nichols

Hi,
If you running Xi on IBM machines please take a look at
Note 859465 - NullPointerException in DTR/XI it solved our problem.
Kind regards Johan Göthberg

Renamed menu item not changed when site published.

I changed the name of my site welcome page back to Welcome (it was "Readings"). But when I publish, "Readings" is still the menu name even though I have used ftp to completely deleted all the published files. So somehow iWeb is keeping the old name. How do I get iWeb to smarten up???

I'm not using MobileMe. I'm publishing the site to http://members.shaw.ca/tealeafreading/MandasTea_LeafReading/Welcome.html
I've run through your suggestions, results as follows....!
Erasing the Safari cache generally does not work: changes are not displayed on the published site.
Publishing the entire site to a folder produces the correct content.
Even if I empty the cache and use FTP to delete the server copy of the site ... the changes do not propagate to the server!!!
What seems to work most often is powering down my Mac.

Save changes when there are no changes

Why is it that when I open a subvi and close it making absolutely no changes, I'm prompted to 'save changes'?

Hi wb2nvy,
"Why would anyone NOT want to include the subvis when the main vi is recompiled to a newer version?"
Maybe you have linked to subVIs also used with the older LV version and so don't want to save subVIs automatically?
As said before: no other IDE I know of automatically saves referenced files to a newer version...
And:
You should get asked to save subVIs before closing the mainVI. You always have the option to save them. You always are presented with reason why LV wants to save. You always have to decide between saving or not saving... You always have the mass compile option.
It's your duty to decide when to upgrade VIs - LV will and cannot take that decision!
Message Edited by GerdW on 06-02-2010 04:37 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Enabling Publishing Server

Hey All,
I am a newbie here trying to install CPS. I was successful on
the web server side and I installed C4 just fine, however, when I
am in adminstration and I try to enable my publishing server (ie.
enter in the url to my CPS) It says my web server is not
responding.
I ensure the port was open in my firewall, I can ping my web
server successfully but....well now I am stumped...any ideas would
be greatly appreciated.
Regards,
Arg....

Hey solostruggle,
First, tks for responding, I really appreciate it.
When I installed CPS it asked me to create an admin password
but I do not recall creating a username???
I did use the file-based method of adding several users to
CPS including myself. I have even made my password the same as the
admin password and still the same message ..... "Server
mymachinename not responding"
-Arg....

Layout of site changes when I publish it?

Hi there,
I have just updated my adobe muse site but when I publish it through the FTP host like I usually do, the layout changes?? When I preview it, the site is fine but it just isn't publishing correctly.
Here is the site www.thspa.com.au
Thank you in advance for your help
Kindest regards,
Hannah xx

Thank you so much for getting back to me : )
I exported it as HTML and it opened fine...looked perfect??? Could it be an issue with the host?? The titles are on a wierd diagonal when I open it in the browser??? I have even uploaded it to the FTP host a few times coz I thought it was just a one off glich but its still playing up?
www.thspa.com.au is the website.
Kindest regards,
Hannah

Cannot save changes when enabling Publishing Server

Similar Messages

Maybe you are looking for